arXiv subjects

Tomáš Šikola

Publications and source records attributed to Tomáš Šikola.

46 records · Page 3Linked to original sources

arXiv2021

Optically tunable Mie-resonance VO2 nanoantennas for metasurfaces in the visible

Metasurfaces are ultrathin nanostructured surfaces that can allow arbitrary manipulation of light. Implementing dynamic tunability into their design could allow the optical functions of metasurfaces to be rapidly modified at will. The most pronounced and robust tunability of optical properties is provided by phase-change materials such as vanadium dioxide (VO2) and germanium antimony telluride (GST), but their implementations have been limited only to near-infrared wavelengths. Here, we demonstrate that VO2 nanoantennas with widely tunable Mie resonances can be utilized for designing tunable metasurfaces in the visible range. In contrast to the dielectric-metallic phase transition-induced tunability in previous demonstrations, we show that dielectric Mie resonances in VO2 nanoantennas offer remarkable scattering and extinction modulation depths (5-8 dB and 1-3 dB, respectively) for tunability in the visible. Moreover, these strong resonances are optically switchable using a continuous-wave laser. Our results establish VO2 nanostructures as low-loss building blocks of optically tunable metasurfaces.

physics.optics↗

arXiv2020

Single-Shot Orientation Imaging of Nanorods Using Spin-to-Orbital Angular Momentum Conversion of Light

The key information about any nanoscale system are orientations and conformations of its parts. Unfortunately, these details are often hidden below the diffraction limit and elaborate techniques must be used to optically probe them. Here, we present a single-shot imaging technique allowing time-resolved monitoring of rotation motion of metal nanorods, realized in a wide-field regime and with no ambiguity of the measured angles. In our novel method, the nanorod orientation is imprinted onto a geometric phase of scattered light composed of the opposite spin states. By spin-to-orbital angular momentum conversion, we generate two oppositely winding helical waves (optical vortices) that are used for restoring the nanorod in-plane orientation. The method was calibrated using lithographically fabricated nanorods and tested by the rotation imaging of immobilized and moving sub-100 nm colloidal nanorods (measurement accuracy of 2.5°). We envision this technique can be used also for estimation of nanorod aspect ratios and their out-of-plane orientations.

physics.optics↗

arXiv2020

Structural and optical properties of monocrystalline and polycrystalline gold plasmonic nanorods

Plasmonic structures are often fabricated by lithographic patterning of a thin metallic film. Properties of the thin film are intimately related to the quality of the resulting structures. Here we compare two kinds of thin gold films on silicon nitride membrane: a conventional polycrystalline thin film deposited by magnetron sputtering, and monocrystalline gold microplates which were chemically synthesised directly on the membrane's surface for the first time. Both pristine metals were used to fabricate plasmonic nanorods using focused ion beam lithography. Structural and optical properties of the nanorods were characterized by analytical transmission electron microscopy. The dimensions of the nanorods in both substrates reproduced well the designed size of $240 \times 80\ \mathrm{nm^2}$ with the deviations up to 20 nm in both length and width. The shape reproducibility was considerably improved among monocrystalline nanorods fabricated from the same microplate. Interestingly, monocrystal nanorods featured inclined boundaries while the boundaries of the polycrystal nanorods were upright. Q factors and peak loss probabilities of the modes in both structures are within the experimental uncertainty identical. We conclude that the optical response of the plasmonic antennas is not deteriorated when the polycrystalline metal is used instead of the monocrystalline metal.

physics.app-ph↗

arXiv2020

Influence of experimental conditions on localized surface plasmon resonances measurement by electron energy loss spectroscopy

Scanning transmission electron microscopy (STEM) combined with electron energy loss spectroscopy (EELS) has become a standard technique to map localized surface plasmon resonances with a nanometer spatial and a sufficient energy resolution over the last 15 years. However, no experimental work discussing the influence of experimental conditions during the measurement has been published up to now. We present an experimental study of the influence of the primary beam energy and the collection semi-angle on the plasmon resonances measurement by STEM-EELS. To explore the influence of these two experimental parameters we study a series of gold rods and gold bow-tie and diabolo antennas. We discuss the impact on experimental characteristics which are important for successful detection of the plasmon peak in EELS, namely: the intensity of plasmonic signal, the signal to background ratio, and the signal to zero-loss peak ratio. We show that the best results are obtained using a medium primary beam energy, in our case 120 keV, and an arbitrary collection semi-angle, as it is not a critical parameter at this primary beam energy. Our instructive overview will help microscopists in the field of plasmonics to arrange their experiments.

cond-mat.mes-hall↗

arXiv2020

Single-layer graphene on epitaxial FeRh thin films

Graphene is a 2D material that displays excellent electronic transport properties with prospective applications in many fields. Inducing and controlling magnetism in the graphene layer, for instance by proximity of magnetic materials, may enable its utilization in spintronic devices. This paper presents fabrication and detailed characterization of single-layer graphene formed on the surface of epitaxial FeRh thin films. The magnetic state of the FeRh surface can be controlled by temperature, magnetic field or strain due to interconnected order parameters. Characterization of graphene layers by X-ray Photoemission and X-ray Absorption Spectroscopy, Low-Energy Ion Scattering, Scanning Tunneling Microscopy, and Low-Energy Electron Microscopy shows that graphene is single-layer, polycrystalline and covers more than 97% of the substrate. Graphene displays several preferential orientations on the FeRh(001) surface with unit vectors of graphene rotated by 30°, 15°, 11°, and 19° with respect to FeRh substrate unit vectors. In addition, the graphene layer is capable to protect the films from oxidation when exposed to air for several months. Therefore, it can be also used as a protective layer during fabrication of magnetic elements or as an atomically thin spacer, which enables incorporation of switchable magnetic layers within stacks of 2D materials in advanced devices.

cond-mat.mtrl-sci↗

arXiv2019

Silver Amalgam Nanoparticles and Microparticles: A Novel Plasmonic Platform for Spectroelectrochemistry

Plasmonic nanoparticles from unconventional materials can improve or even bring some novel functionalities into the disciplines inherently related to plasmonics such as photochemistry or (spectro)electrochemistry. They can, for example, catalyze various chemical reactions or act as nanoelectrodes and optical transducers in various applications. Silver amalgam is the perfect example of such an unconventional plasmonic material, albeit it is well-known in the field of electrochemistry for its wide cathodic potential window and strong adsorption affinity of biomolecules to its surface. In this study, we investigate in detail the optical properties of nanoparticles and microparticles made from silver amalgam and correlate their plasmonic resonances with their morphology. We use optical spectroscopy techniques on the ensemble level and electron energy loss spectroscopy on the single-particle level to demonstrate the extremely wide spectral range covered by the silver amalgam localized plasmonic resonances, ranging from ultraviolet all the way to the mid-infrared wavelengths. Our results establish silver amalgam as a suitable material for introduction of plasmonic functionalities into photochemical and spectroelectrochemical systems, where the plasmonic enhancement of electromagnetic fields and light emission processes could synergistically meet with the superior electrochemical characteristics of mercury.

physics.optics↗

arXiv2019

Independent engineering of individual plasmon modes in plasmonic dimers with conductive and capacitive coupling

We revisit plasmonic modes in nanoparticle dimers with conductive or insulating junction resulting in conductive or capacitive coupling. In our study which combines electron energy loss spectroscopy, optical spectroscopy, and numerical simulations, we show coexistence of strongly and weakly hybridized modes. While the properties of the former ones strongly depend on the nature of the junction, the properties of the latter ones are nearly unaffected. This opens up a prospect for independent engineering of different plasmonic modes in a single plasmonic antenna. In addition, we show that Babinet's principle allows to engineer the near field of plasmonic modes independent of their energy. Finally, we demonstrate that combined electron energy loss imaging of a plasmonic antenna and its Babinet-complementary counterpart allows to reconstruct the distribution of both electric and magnetic near fields of localised plasmonic resonances supported by the antenna as well as charge and current antinodes of related charge oscillations.

physics.app-ph↗

arXiv2019

Plasmonic antennas with electric, magnetic, and electromagnetic hot spots based on Babinet's principle

We theoretically study plasmonic antennas featuring areas of extremely concentrated electric or magnetic field, known as hot spots. We combine two types of electric-magnetic complementarity to increase the degree of freedom for the design of the antennas: bow-tie and diabolo duality and Babinet's principle. We evaluate the figures of merit for different plasmon-enhanced optical spectroscopy methods: field enhancement, decay rate enhancement, and quality factor of the plasmon resonances. The role of Babinet's principle in interchanging electric and magnetic field hot spots and its consequences for practical antenna design are discussed. In particular, diabolo antennas exhibit slightly better performance than bow-ties in terms of larger field enhancement and larger Q factor. For specific resonance frequency, diabolo antennas are considerably smaller than bow-ties which makes them favourable for the integration into more complex devices but also makes their fabrication more demanding in terms of spatial resolution. Finally, we propose Babinet-type dimer antenna featuring electromagnetic hot spot with both the electric and magnetic field components treated on equal footing.

physics.app-ph↗

arXiv2018

Geometric-phase microscopy for high-resolution quantitative phase imaging of plasmonic metasurfaces with sensitivity down to a single nanoantenna

Optical metasurfaces have emerged as a new generation of building blocks for multi-functional optics. Design and realization of metasurface elements place ever-increasing demands on accurate assessment of phase alterations introduced by complex nanoantenna arrays, a process referred to as quantitative phase imaging. Despite considerable effort, the widefield (non-scanning) phase imaging that would approach resolution limits of optical microscopy and indicate the response of a single nanoantenna still remains a challenge. Here, we report on a new strategy in incoherent holographic imaging of metasurfaces, in which unprecedented spatial resolution and light sensitivity are achieved by taking full advantage of the polarization selective control of light through the geometric (Pancharatnam-Berry) phase. The measurement is carried out in an inherently stable common-path setup composed of a standard optical microscope and an add-on imaging module. Phase information is acquired from the mutual coherence function attainable in records created in broadband spatially incoherent light by the self-interference of scattered and leakage light coming from the metasurface. In calibration measurements, the phase was mapped with the precision and spatial background noise better than 0.01 rad and 0.05 rad, respectively. The imaging excels at the high spatial resolution that was demonstrated experimentally by the precise amplitude and phase restoration of vortex metalenses and a metasurface grating with 833 lines/mm. Thanks to superior light sensitivity of the method, we demonstrated, for the first time to our knowledge, the widefield measurement of the phase altered by a single nanoantenna, while maintaining the precision well below 0.15 rad.

physics.optics↗

arXiv2015

Excitonic fine structure splitting in type-II quantum dots

Excitonic fine structure splitting in quantum dots is closely related to the lateral shape of the wave functions. We have studied theoretically the fine structure splitting in InAs quantum dots with a type-II confinement imposed by a GaAsSb capping layer. We show that very small values of the fine structure splitting comparable with the natural linewidth of the excitonic transitions are achievable for realistic quantum dot morphologies despite the structural elongation and the piezoelectric field. For example, varying the capping layer thickness allows for a fine tuning of the splitting energy. The effect is explained by a strong sensitivity of the hole wave function to the morphology of the structure and a mutual compensation of the electron and hole anisotropies. The oscillator strength of the excitonic transitions in the studied quantum dots is comparable to those with a type-I confinement which makes the dots attractive for quantum communication technology as emitters of polarization-entangled photon pairs.

cond-mat.mes-hall↗