arXiv subjects

Toma Susi

Publications and source records attributed to Toma Susi.

53 records · Page 3Linked to original sources

arXiv2018

Electron-Beam Manipulation of Silicon Dopants in Graphene

The direct manipulation of individual atoms in materials using scanning probe microscopy has been a seminal achievement of nanotechnology. Recent advances in imaging resolution and sample stability have made scanning transmission electron microscopy a promising alternative for single-atom manipulation of covalently bound materials. Pioneering experiments using an atomically focused electron beam have demonstrated the directed movement of silicon atoms over a handful of sites within the graphene lattice. Here, we achieve a much greater degree of control, allowing us to precisely move silicon impurities along an extended path, circulating a single hexagon, or back and forth between the two graphene sublattices. Even with manual operation, our manipulation rate is already comparable to the state-of-the-art in any atomically precise technique. We further explore the influence of electron energy on the manipulation rate, supported by improved theoretical modeling taking into account the vibrations of atoms near the impurities, and implement feedback to detect manipulation events in real time. In addition to atomic-level engineering of its structure and properties, graphene also provides an excellent platform for refining the accuracy of quantitative models and for the development of automated manipulation.

cond-mat.mtrl-sci↗

arXiv2018

Competing dynamics of single phosphorus dopant in graphene with electron irradiation

Atomic-level structural changes in materials are important but challenging to study. Here, we demonstrate the dynamics and the possibility of manipulating a phosphorus dopant atom in graphene using scanning transmission electron microscopy (STEM). The mechanisms of various processes are explored and compared with those of other dopant species by first-principles calculations. This work paves the way for designing a more precise and optimized protocol for atomic engineering.

cond-mat.mtrl-sci↗

arXiv2018

Implanting germanium into graphene

Incorporating heteroatoms into the graphene lattice may be used to tailor its electronic, mechanical and chemical properties. Direct substitutions have thus far been limited to incidental Si impurities and P, N and B dopants introduced using low-energy ion implantation. We present here the heaviest impurity to date, namely $^{74}$Ge$^+$ ions implanted into monolayer graphene. Although sample contamination remains an issue, atomic resolution scanning transmission electron microscopy imaging and quantitative image simulations show that Ge can either directly substitute single atoms, bonding to three carbon neighbors in a buckled out-of-plane configuration, or occupy an in-plane position in a divacancy. First principles molecular dynamics provides further atomistic insight into the implantation process, revealing a strong chemical effect that enables implantation below the graphene displacement threshold energy. Our results show that heavy atoms can be implanted into the graphene lattice, pointing a way towards advanced applications such as single-atom catalysis with graphene as the template.

cond-mat.mtrl-sci↗

arXiv2018

Atomic structure of intrinsic and electron-irradiation-induced defects in MoTe2

Studying the atomic structure of intrinsic defects in two-dimensional transition metal dichalcogenides is difficult since they damage quickly under the intense electron irradiation in transmission electron microscopy (TEM). However, this can also lead to insights into the creation of defects and their atom-scale dynamics. We first show that MoTe 2 monolayers without protection indeed quickly degrade during scanning TEM (STEM) imaging, and discuss the observed atomic-level dynamics, including a transformation from the 1H phase into 1T', three-fold rotationally symmetric defects, and the migration of line defects between two 1H grains with a 60° misorientation. We then analyze the atomic structure of MoTe2 encapsulated between two graphene sheets to mitigate damage, finding the as-prepared material to contain an unexpectedly large concentration of defects. These include similar point defects (or quantum dots, QDs) as those created in the non-encapsulated material, and two different types of line defects (or quantum wires, QWs) that can be transformed from one to the other under electron irradiation. Our density functional theory simulations indicate that the QDs and QWs embedded in MoTe2 introduce new midgap states into the semiconducting material, and may thus be used to control its electronic and optical properties. Finally, the edge of the encapsulated material appears amorphous, possibly due to the pressure caused by the encapsulation.

cond-mat.mtrl-sci↗

arXiv2017

Structure and Electronic States of a Graphene Double Vacancy with an Embedded Si Dopant

Silicon represents a common intrinsic impurity in graphene, commonly bonding to either three or four carbon neighbors respectively in a single or double carbon vacancy. We investigate the effect of the latter defect (Si-C$_4$) on the structural and electronic properties of graphene using density functional theory (DFT). Calculations based both on molecular models and with periodic boundary conditions have been performed. The two-carbon vacancy was constructed from pyrene (pyrene-2C) which was then expanded to circumpyrene-2C. The structural characterization of these cases revealed that the ground state is slightly non-planar, with the bonding carbons displaced from the plane by up to $\pm$0.2 Å. This non-planar structure was confirmed by embedding the defect into a 10$\times$8 supercell of graphene, resulting in 0.22 eV lower energy than the previously considered planar structure. Natural bond orbital (NBO) analysis showed sp$^3$ hybridization at the silicon atom for the non-planar structure and sp$^2$d hybridization for the planar structure. Atomically resolved electron energy loss spectroscopy (EELS) and corresponding spectrum simulations provide a mixed picture: a flat structure provides a slightly better overall spectrum match, but a small observed pre-peak is only present in the corrugated simulation. Considering the small energy barrier between the two equivalent corrugated conformations, both structures could plausibly exist as a superposition over the experimental timescale of seconds.

cond-mat.mtrl-sci↗

arXiv2017

Towards atomically precise manipulation of 2D nanostructures in the electron microscope

Despite decades of research, the ultimate goal of nanotechnology--top-down manipulation of individual atoms--has been directly achieved with only one technique: scanning probe microscopy. In this Review, we demonstrate that scanning transmission electron microscopy (STEM) is emerging as an alternative method for the direct assembly of nanostructures, with possible applications in plasmonics, quantum technologies, and materials science. Atomically precise manipulation with STEM relies on recent advances in instrumentation that have enabled non-destructive atomic-resolution imaging at lower electron energies. While momentum transfer from highly energetic electrons often leads to atom ejection, interesting dynamics can be induced when the transferable kinetic energies are comparable to bond strengths in the material. Operating in this regime, very recent experiments have revealed the potential for single-atom manipulation using the Angstrom-sized electron beam. To truly enable control, however, it is vital to understand the relevant atomic-scale phenomena through accurate dynamical simulations. Although excellent agreement between experiment and theory for the specific case of atomic displacements from graphene has been recently achieved using density functional theory molecular dynamics, in many other cases quantitative accuracy remains a challenge. We provide a comprehensive reanalysis of available experimental data on beam-driven dynamics in light of the state-of-the-art in simulations, and identify important targets for improvement. Overall, the modern electron microscope has great potential to become an atom-scale fabrication platform, especially for covalently bonded 2D nanostructures. We review the developments that have made this possible, argue that graphene is an ideal starting material, and assess the main challenges moving forward.

cond-mat.mtrl-sci↗

arXiv2017

Buckyball sandwiches

Two-dimensional (2D) materials have considerably expanded the field of materials science in the last decade. Even more recently, various 2D materials have been assembled into vertical van der Waals heterostacks, and it has been proposed to combine them with other low- dimensional structures to create new materials with hybridized properties. Here, we demonstrate the first direct images of a suspended 0D/2D heterostructure incorporating $C_{60}$ molecules between two graphene layers in a buckyball sandwich structure. We find clean and ordered $C_{60}$ islands with thicknesses down to one molecule, shielded by the graphene layers from the microscope vacuum and partially protected from radiation damage during scanning transmission electron microscopy imaging. The sandwich structure serves as a 2D nanoscale reaction chamber allowing the analysis of the structure of the molecules and their dynamics at atomic resolution.

cond-mat.mtrl-sci↗

arXiv2017

Structure and energetics of embedded Si patterns in graphene

Recent experiments have revealed the possibility of precise electron beam manipulation of silicon impurities in graphene. Motivated by these findings and studies on metal surface quantum corrals, the question arises what kind of embedded Si structures are possible within the hexagonal lattice, and how these are limited by the distortion caused by the preference of Si for $sp^{3}$ hybridization. In this work, we study the geometry and stability of elementary Si patterns in graphene, including lines, hexagons, triangles, circles and squares. Due to the size of the required unit cells, to obtain the relaxed geometries we use an empirical bond-order potential as a starting point for density functional theory. Despite some interesting discrepancies, the classical geometries provide an effective route for the simulation of large structures.

cond-mat.mtrl-sci↗

arXiv2017

Cleaning graphene: comparing heat treatments in air and in vacuum

Surface impurities and contamination often seriously degrade the properties of two-dimensional materials such as graphene. To remove contamination, thermal annealing is commonly used. We present a comparative analysis of annealing treatments in air and in vacuum, both ex situ and "pre-situ", where an ultra-high vacuum treatment chamber is directly connected to an aberration-corrected scanning transmission electron microscope. While ex situ treatments do remove contamination, it is challenging to obtain atomically clean surfaces after ambient transfer. However, pre-situ cleaning with radiative or laser heating appears reliable and well suited to clean graphene without undue damage to its structure.

cond-mat.mtrl-sci↗

arXiv2016

Grain boundary-mediated nanopores in molybdenum disulfide grown by chemical vapor deposition

Molybdenum disulfide (MoS2) is a particularly interesting member of the family of two-dimensional (2D) materials due to its semiconducting and tunable electronic properties. Currently, the most reliable method for obtaining high-quality industrial scale amounts of 2D materials is chemical vapor deposition (CVD), which results in polycrystalline samples. As grain boundaries (GBs) are intrinsic defect lines within CVD-grown 2D materials, their atomic structure is of paramount importance. Here, through atomic-scale analysis of micrometer-long GBs, we show that covalently bound boundaries in 2D MoS2 tend to be decorated by nanopores. Such boundaries occur when differently oriented MoS2 grains merge during growth, whereas the overlap of grains leads to boundaries with bilayer areas. Our results suggest that the nanopore formation is related to stress release in areas with a high concentration of dislocation cores at the grain boundaries, and that the interlayer interaction leads to intrinsic rippling at the overlap regions. This provides insights for the controlled fabrication of large-scale MoS 2 samples with desired structural properties for applications.

cond-mat.mtrl-sci↗

arXiv2016

Single-atom spectroscopy of phosphorus dopants implanted into graphene

One of the keys behind the success of the modern semiconductor technology has been the ion implantation of silicon, which allows its electronic properties to be tailored. For similar purposes, heteroatoms have been introduced into carbon nanomaterials both during growth and using post-growth methods. However, due to the nature of the samples, it has been challenging to determine whether the heteroatoms have been incorporated into the lattice as intended, with direct observations so far being limited to N and B dopants, and incidental Si impurities. Furthermore, ion implantation of these materials is more challenging due to the requirement of very low ion energies and atomically clean surfaces. Here, we provide the first atomic-resolution imaging and electron energy loss spectroscopy (EELS) evidence of phosphorus atoms incorporated into the graphene lattice by low-energy ion irradiation. The measured P L-edge response of an single-atom EELS spectrum map shows excellent agreement with an ab initio spectrum simulation, conclusively identifying the P in a buckled substitutional configuration. Our results demonstrate the viability of phosphorus as a lattice dopant in $sp^2$-bonded carbon structures and provide its unmistakeable fingerprint for further studies.

cond-mat.mtrl-sci↗

arXiv2016

Isotope analysis in the transmission electron microscope

The Ångström-sized probe of the scanning transmission electron microscope can visualize and collect spectra from single atoms. This can unambiguously resolve the chemical structure of materials, but not their isotopic composition. Here we differentiate between two isotopes of the same element by quantifying how likely the energetic imaging electrons are to eject atoms. First, we measure the displacement probability in graphene grown from either $^{12}$C or $^{13}$C and describe the process using a quantum mechanical model of lattice vibrations coupled with density functional theory simulations. We then test our spatial resolution in a mixed sample by ejecting individual atoms from nanoscale areas spanning an interface region that is far from atomically sharp, mapping the isotope concentration with a precision better than 20%. Although we use a scanning instrument, our method should be applicable to any atomic resolution transmission electron microscope and to other low-dimensional materials.

physics.ins-det↗

arXiv2016

Gas phase synthesis of non-bundled, small diameter single-walled carbon nanotubes with near-armchair chiralities

We present a novel floating catalyst synthesis route for individual, i.e. non-bundled, small diameter single-walled carbon nanotubes (SWCNTs) with a narrow chiral angle distribution peaking at high chiralities near the armchair species. An ex situ spark discharge generator was used to form iron particles with geometric number mean diameters of 3-4 nm and fed into a laminar flow chemical vapour deposition reactor for the continuous synthesis of long and high-quality SWCNTs from ambient pressure carbon monoxide. The intensity ratio of G/D peaks in Raman spectra up to 48 and mean tube lengths up to 4 microns were observed. The chiral distributions, as directly determined by electron diffraction in the transmission electron microscope, clustered around the (n,m) indices (7,6), (8,6), (8,7) and (9,6), with up to 70% of tubes having chiral angles over 20°. The mean diameter of SWCNTs was reduced from 1.10 to 1.04 nm by decreasing the growth temperature from 880 to 750 °C, which simultaneously increased the fraction of semiconducting tubes from 67 to 80%. Limiting the nanotube gas phase number concentration to approx. 100 000 per cubic centimetre successfully prevented nanotube bundle formation that is due to collisions induced by Brownian diffusion. Up to 80 % of 500 as-deposited tubes observed by atomic force and transmission electron microscopy were individual. Transparent conducting films deposited from these SWCNTs exhibited record low sheet resistances of 63 Ohms/sq. at 90 % transparency for 550 nm light.

cond-mat.mes-hall↗

arXiv2016

Uncovering the ultimate performance of single-walled carbon nanotube films as transparent conductors

The ultimate performance - ratio of electrical conductivity to optical absorbance - of single- walled carbon nanotube (SWCNTs) transparent conductive films (TCFs) is an issue of considerable application relevance. Here, we present direct experimental evidence that SWCNT bundling is detrimental for their performance. We combine floating catalyst synthesis of non-bundled, high-quality SWCNTs with an aggregation chamber, in which bundles with mean diameters ranging from 1.38 to 2.90 nm are formed from identical 3 microns long SWCNTs. The as-deposited TCFs from 1.38 nm bundles showed sheet resistances of 310 Ohms/sq. at 90% transparency, while those from larger bundles of 1.80 and 2.90 nm only reached values of 475 and 670 Ohms/sq., respectively. Based on these observations, we elucidate how networks formed by smaller bundles perform better due to their greater interconnectivity at a given optical density. Finally, we present a semi-empirical model for TCF performance as a function of SWCNT mean length and bundle diameter. This gives an estimate for the ultimate performance of non-doped, random network mixed-metallicity SWCNT TCFs at ~80 Ohms/sq. and 90% transparency.

cond-mat.mes-hall↗

arXiv2016

On the bonding environment of phosphorus in purified doped single-walled carbon nanotubes

In this work, phosphorous-doped single-walled carbon nanotubes have been synthesized by the thermal decomposition of trimethylphosphine using a high-vacuum chemical vapor deposition method. Furthermore, a modified density-gradient-ultracentrifugation process has been applied to carefully purify our doped material. The combined use of Raman and X-ray photoelectron spectroscopy allowed us to provide the first insight into the bonding environment of P incorporated into the carbon lattice, avoiding competing signals arising from synthesis byproducts. This study represents the first step toward the identification of the bonding configuration of P atoms when direct substitution takes place.

cond-mat.mtrl-sci↗

arXiv2014

Calculation of the graphene C 1$\textit{s}$ core level binding energy

X-ray photoelectron spectroscopy (XPS) combined with first principles modeling is a powerful tool for determining the chemical composition and electronic structure of novel materials. Of these, graphene is an especially important model system for understanding the properties of other carbon nanomaterials. Here, we calculate the carbon 1$\textit{s}$ core level binding energy of pristine graphene using two methods based on density functional theory total energy differences: a calculation with an explicit core-hole ($Δ$KS), and a novel all-electron extension of the delta self-consistent field ($Δ$SCF) method. We study systematically their convergence and computational workload, and the dependence of the energies on the chosen exchange-correlation functional. The $\mathrmΔ$SCF method is computationally more expensive, but gives consistently higher C 1$\textit{s}$ binding energies. Although there is a significant functional dependence, the binding energy calculated using the PBE functional is found to be remarkably close to what has been measured for graphite.

cond-mat.mes-hall↗

arXiv2014

Silicon-carbon bond inversions driven by 60 keV electrons in graphene

We demonstrate that 60 keV electron irradiation drives the diffusion of threefold coordinated Si dopants in graphene by one lattice site at a time. First principles simulations reveal that each step is caused by an electron impact on a C atom next to the dopant. Although the atomic motion happens below our experimental time resolution, stochastic analysis of 38 such lattice jumps reveals a probability for their occurrence in a good agreement with the simulations. Conversions from three- to fourfold coordinated dopant structures and the subsequent reverse process are significantly less likely than the direct bond inversion. Our results thus provide a model of non-destructive and atomically precise structural modification and detection for two-dimensional materials.

cond-mat.mes-hall↗