arXiv subjects

Tomasz Plewa

Publications and source records attributed to Tomasz Plewa.

At least 19 recordsLinked to original sources

arXiv2025

Mesoscale Turbulence in Type Ia Supernova Deflagrations: Buoyancy-Driven Fuel Heating and Prospects for Delayed-Detonations

The aim of this work is to characterize the thermodynamic state of fuel mixed into the turbulent flame brush in the context of the Zel'dovich deflagration-to-detonation transition (ZDDT) mechanism of Type Ia supernovae (SNe Ia). We perform a series of three-dimensional computer simulations of thermonuclear deflagrations subject to the Rayleigh-Taylor instability (RTI) for conditions found in model explosions of centrally ignited realistic, Chandrasekhar mass white dwarf progenitors. These conditions correspond to explosion times when the flame reaches low density progenitor regions where DDT is expected to occur. The flame database is constructed using a thickened flame model. High numerical resolution is achieved with the help of the adaptive mesh refinement (AMR) approach allowing, for the first time, to resolve mesoscale buoyancy-driven flame turbulence. The system is evolved to a quasi-steady state, and flow properties in the turbulent region, where turbulence is most isotropic, is analyzed in a co-moving frame of reference. We find evidence for strong buoyancy-driven adiabatic heating of fuel layers adjacent to the flame front. The heating results in a dramatic reduction of fuel ignition times by between $\approx$2 and more than about 5 orders of magnitude. The heating increases with the RTI forcing. The observed shortening of fuel burning timescales suggests a new source of energy is important inside fuel penetrating the flame brush. These regions are up to several hundred meters wide. On the basis of the previous results of turbulent combustion in SNe Ia, preconditioning required by the ZDDT mechanism can occur there.

astro-ph.SR↗

arXiv2022

A hybrid adaptive multiresolution approach for the efficient simulation of reactive flows

Computational studies that use block-structured adaptive mesh refinement (AMR) approaches suffer from unnecessarily high mesh resolution in regions adjacent to important solution features. This deficiency limits the performance of AMR codes. In this work a novel hybrid adaptive multiresolution (HAMR) approach to AMR-based calculations is introduced to address this issue. The multiresolution (MR) smoothness indicators are used to identify regions of smoothness on the mesh where the computational cost of individual physics solvers may be decreased by replacing direct calculations with interpolation. We suggest an approach to balance the errors due to the adaptive discretization and the interpolation of physics quantities such that the overall accuracy of the HAMR solution is consistent with that of the MR-driven AMR solution. The performance of the HAMR scheme is evaluated for a range of test problems, from pure hydrodynamics to turbulent combustion.

physics.comp-ph↗

arXiv2020

SN Ia DDT Explosions Powered by the Zeldovich Reactivity Gradient Mechanism

The aim of this work is to identify and explain the necessary conditions required for an energetic explosion of a Chandrasekhar-mass white dwarf. We construct and analyze weakly compressible turbulence models with nuclear burning effects for carbon/oxygen plasma at a density expected for deflagration-to-detonation transition (DDT) to occur. We observe formation of carbon deflagrations and transient carbon detonations at early times. As turbulence becomes increasingly inhomogeneous, sustained carbon detonations are initiated by the Zel'dovich reactivity gradient mechanism. The fuel is suitably preconditioned by the action of compressive turbulent modes with wavelength comparable to the size of resolved turbulent eddies; no acoustic wave is involved in this process. Oxygen detonations are initiated either aided by reactivity gradients or by collisions of carbon detonations. The observed evolutionary timescales are found sufficiently short for the above process to occur in the expanding, centrally ignited massive white dwarf. The inhomogeneous conditions produced prior to DDT might be of consequence for the chemical composition of the outer ejecta regions of SN Ia from the single degenerate channel, and offer potential for validation of the proposed model.

astro-ph.SR↗

arXiv2018

Interaction of hemispherical blast waves with inhomogeneous spheres: Probing the collision of a supernova ejecta with a nearby companion star in the laboratory

Past high-energy density laboratory experiments provided insights into the physics of supernovae, supernova remnants, and the destruction of interstellar clouds. In a typical experimental setting, a laser-driven planar blast wave interacts with a compositionally-homogeneous spherical or cylindrical target. In this work we propose a new laboratory platform that accounts for curvature of the impacting shock and density stratification of the target. Both characteristics reflect the conditions expected to exist shortly after a supernova explosion in a close binary system. We provide details of a proposed experimental design (laser drive, target configuration, diagnostic system), optimized to capture the key properties of recent ejecta-companion interaction models. Good qualitative agreement found between our experimental models and their astrophysical counterparts highlights strong potential of the proposed design to probe details of the ejecta-companion interaction for broad classes of objects by means of high energy density laboratory experiments.

astro-ph.SR↗

arXiv2018

Multidimensional Models of Type Ia Supernova Nebular Spectra: Strong Emission Lines from Stripped Companion Gas Rule Out Classic Single Degenerate Systems

The classic single-degenerate model for the progenitors of Type Ia Supernova (SN Ia) predicts that the supernova ejecta should be enriched with solar-like abundance material stripped from the companion star. Spectroscopic observations of normal SNe Ia at late times, however, have not resulted in definite detection of hydrogen. In this Letter, we study line formation in SNe Ia at nebular times using non-LTE spectral modeling. We present, for the first time, multidimensional radiative transfer calculations of SNe Ia with stripped material mixed in the ejecta core, based on hydrodynamical simulations of ejecta-companion interaction. We find that interaction models with main sequence companions produce significant H$α$ emission at late times, ruling out this type of binaries being viable progenitors of SNe Ia. We also predict significant He I line emission at optical and near-infrared wavelengths for both hydrogen-rich or helium-rich material, providing an additional observational probe of stripped ejecta. We produce models with reduced stripped masses and find a more stringent mass limit of $M_{st} \lesssim 1\times 10^{-4} M_\odot$ of stripped companion material for SN 2011fe.

astro-ph.SR↗

arXiv2017

Detonability of white dwarf plasma: turbulence models at low densities

We study the conditions required to produce self-sustained detonations in turbulent, carbon-oxygen degenerate plasma at low densities. We perform a series of three-dimensional hydrodynamic simulations of turbulence driven with various degrees of compressibility. The average conditions in the simulations are representative of models of merging binary white dwarfs. We find that material with very short ignition times is abundant in the case that turbulence is driven compressively. This material forms contiguous structures that persist over many ignition times, and that we identify as prospective detonation kernels. Detailed analysis of prospective kernels reveals that these objects are centrally-condensed and their shape is characterized by low curvature, supportive of self-sustained detonations. The key characteristic of the newly proposed detonation mechanism is thus high degree of compressibility of turbulent drive. The simulated detonation kernels have sizes notably smaller than the spatial resolution of any white dwarf merger simulation performed to date. The resolution required to resolve kernels is 0.1 km. Our results indicate a high probability of detonations in such well-resolved simulations of carbon-oxygen white dwarf mergers. These simulations will likely produce detonations in systems of lower total mass, thus broadening the population of white dwarf binaries capable of producing Type Ia supernovae. Consequently, we expect a downward revision of the lower limit of the total merger mass that is capable of producing a prompt detonation. We review application of the new detonation mechanism to various explosion scenarios of single, Chandrasekhar-mass white dwarfs.

astro-ph.SR↗

arXiv2014

Toward connecting core-collapse supernova theory with observations: I. Shock revival in a 15 Msun blue supergiant progenitor with SN 1987A energetics

We study the evolution of the collapsing core of a 15 Msun blue supergiant supernova progenitor from the core bounce until 1.5 seconds later. We present a sample of hydrodynamic models parameterized to match the explosion energetics of SN 1987A. We find the spatial model dimensionality to be an important contributing factor in the explosion process. Compared to two-dimensional simulations, our three-dimensional models require lower neutrino luminosities to produce equally energetic explosions. We estimate that the convective engine in our models is 4% more efficient in three dimensions than in two dimensions. We propose that the greater efficiency of the convective engine found in three-dimensional simulations might be due to the larger surface-to-volume ratio of convective plumes, which aids in distributing energy deposited by neutrinos. We do not find evidence of the standing accretion shock instability nor turbulence being a key factor in powering the explosion in our models. Instead, the analysis of the energy transport in the post-shock region reveals characteristics of penetrative convection. The explosion energy decreases dramatically once the resolution is inadequate to capture the morphology of convection on large scales. This shows that the role of dimensionality is secondary to correctly accounting for the basic physics of the explosion. We also analyze information provided by particle tracers embedded in the flow, and find that the unbound material has relatively long residency times in two-dimensional models, while in three dimensions a significant fraction of the explosion energy is carried by particles with relatively short residency times.

astro-ph.SR↗

arXiv2013

Prospects of Turbulence Studies in High-Energy Density Laser-Generated Plasma: Numerical Investigations in Two Dimensions

We investigate the possibility of generating and studying turbulence in plasma by means of high-energy density laser-driven experiments. Our focus is to create supersonic, self-magnetized turbulence with characteristics that resemble those found in the interstellar medium (ISM). We consider a target made of a spherical core surrounded by a shell made of denser material. The shell is irradiated by a sequence of laser pulses sending inward-propagating shocks that convert the inner core into plasma and create turbulence. In the context of the evolution of the ISM, the shocks play the role of supernova remnant shocks and the core represents the ionized interstellar medium. We consider the effects of both pre-existing and self-generating magnetic fields and study the evolution of the system by means of two-dimensional numerical simulations. We find that the evolution of the turbulent core is generally, subsonic with rms-Mach number $M_t\approx 0.2$. We observe an isotropic, turbulent velocity field with an inertial range power spectra of $P(k)\propto k^{-2.3}$. We account for the effects of self-magnetization and find that the resulting magnetic field has characteristic strength $\approx 3\times 10^{4}$ G. The corresponding plasma beta is $\approx 1\times 10^{4}$--$1\times 10^{5}$, indicating that the magnetic field does not play an important role in the dynamical evolution of the system. The natural extension of this work is to study the system evolution in three-dimensions, with various laser drive configurations, and targets with shells and cores of different masses. The latter modification may help to increase the turbulent intensity and possibly create transonic turbulence. One of the key challenges is to obtain transonic turbulent conditions in a quasi-steady state environment.

physics.plasm-ph↗

arXiv2013

The Braginskii model of the Rayleigh-Taylor instability. I. Effects of self-generated magnetic fields and thermal conduction in two dimensions

(abridged) There exists a substantial disagreement between computer simulation results and high-energy density laboratory experiments of the Rayleigh-Taylor instability Kuranz et al. (2010). We adopt the Braginskii formulation for transport in hot, dense plasma, implement and verify the additional physics modules, and conduct a computational study of a single-mode RTI in two dimensions with various combinations of the newly implemented modules. We find that magnetic fields reach levels on the order of 11 MG in the absence of thermal conduction. We observe denting of the RT spike tip and generation of additional higher order modes as a result of these fields. Contrary to interpretation presented in earlier work Nishiguchi (2002), the additional mode is not generated due to modified anisotropic heat transport effects but due to dynamical effect of self-generated magnetic fields. The main effects of thermal conduction are a reduction of the RT instability growth rate (by about 20% for conditions considered here) and inhibited mixing on small scales. In this case, the maximum self-generated magnetic fields are weaker (approximately 1.7 MG). These self-generated magnetic fields are of very similar strength compared to magnetic fields observed recently in HED laboratory experiments Manuel et al. (2012). We find that thermal conduction plays the dominant role in the evolution of the model RTI system considered. It smears out small-scale structure and reduces the RTI growth rate. This may account for the relatively featureless RT spikes seen in experiments, but does not explain mass extensions observed in experiments. Resistivity and related heat source terms were not included in the present work, but we estimate their impact on RTI as modest and not affecting our main conclusions. Resistive effects will be discussed in detail in the next paper in the series.

physics.plasm-ph↗

arXiv2008

The Physics of Wind-Fed Accretion

We provide a brief review of the physical processes behind the radiative driving of the winds of OB stars and the Bondi-Hoyle-Lyttleton capture and accretion of a fraction of the stellar wind by a compact object, typically a neutron star, in detached high-mass X-ray binaries (HMXBs). In addition, we describe a program to develop global models of the radiatively-driven photoionized winds and accretion flows of HMXBs, with particular attention to the prototypical system Vela X-1. The models combine XSTAR photoionization calculations, HULLAC emission models appropriate to X-ray photoionized plasmas, improved models of the radiative driving of photoionized winds, FLASH time-dependent adaptive-mesh hydrodynamics calculations, and Monte Carlo radiation transport. We present two- and three-dimensional maps of the density, temperature, velocity, ionization parameter, and emissivity distributions of representative X-ray emission lines, as well as synthetic global Monte Carlo X-ray spectra. Such models help to better constrain the properties of the winds of HMXBs, which bear on such fundamental questions as the long-term evolution of these binaries and the chemical enrichment of the interstellar medium.

astro-ph↗

arXiv2007

Hydrodynamic and Spectral Simulations of HMXB Winds

We describe preliminary results of a global model of the radiatively-driven photoionized wind and accretion flow of the high-mass X-ray binary Vela X-1. The full model combines FLASH hydrodynamic calculations, XSTAR photoionization calculations, HULLAC atomic data, and Monte Carlo radiation transport. We present maps of the density, temperature, velocity, and ionization parameter from a FLASH two-dimensional time-dependent simulation of Vela X-1, as well as maps of the emissivity distributions of the X-ray emission lines.

astro-ph↗

arXiv2006

Detonating Failed Deflagration Model of Thermonuclear Supernovae II. Comparison to Observations

We develop and demonstrate the methodology of testing multi-dimensional supernova models against observations by studying the properties of one example of the detonation from failed deflagration (DFD) explosion model of thermonuclear supernovae. Using time-dependent multi-dimensional radiative transfer calculations, we generate the synthetic broadband optical light curves, near-infrared light curves, color evolution curves, full spectral time-series, and spectropolarization of the model, as seen from various viewing angles. All model observables are critically evaluated against examples of well-observed, standard Type Ia supernovae (SNe Ia). We explore the consequences of the intrinsic model asphericity by studying the dependence of the model emission on viewing angle, and by quantifying the resulting dispersion in (and internal correlations between) various model observables. These statistical properties of the model are also evaluated against those of the available observational sample of SNe Ia. On the whole, the DFD model shows good agreement with a broad range of SN Ia observations. Certain deficiencies are also apparent, and point to further developments within the basic theoretical framework. We also identify several intriguing orientation effects in the model which suggest ways in which the asphericity of SNe Ia may contribute to their photometric and spectroscopic diversity and, conversely, how the relative homogeneity of SNe Ia constrains the degree of asymmetry allowable in the models. The comprehensive methodology adopted in this work proves an essential component of developing and validating theoretical supernova models, and helps motivate and clearly define future directions in both the modeling and the observation of SNe Ia.

astro-ph↗

arXiv2006

Detonating Failed Deflagration Model of Thermonuclear Supernovae I. Explosion Dynamics

We present a detonating failed deflagration model of Type Ia supernovae. In this model, the thermonuclear explosion of a massive white dwarf follows an off-center deflagration. We conduct a survey of asymmetric ignition configurations initiated at various distances from the stellar center. In all cases studied, we find that only a small amount of stellar fuel is consumed during deflagration phase, no explosion is obtained, and the released energy is mostly wasted on expanding the progenitor. Products of the failed deflagration quickly reach the stellar surface, polluting and strongly disturbing it. These disturbances eventually evolve into small and isolated shock-dominated regions which are rich in fuel. We consider these regions as seeds capable of forming self-sustained detonations that, ultimately, result in the thermonuclear supernova explosion. Preliminary nucleosynthesis results indicate the model supernova ejecta are typically composed of about 0.1-0.25 Msun of silicon group elements, 0.9-1.2 Msun of iron group elements, and are essentially carbon-free. The ejecta have a composite morphology, are chemically stratified, and display a modest amount of intrinsic asymmetry. The innermost layers are slightly egg-shaped with the axis ratio ~1.2-1.3 and dominated by the products of silicon burning. This central region is surrounded by a shell of silicon-group elements. The outermost layers of ejecta are highly inhomogeneous and contain products of incomplete oxygen burning with only small admixture of unburned stellar material. The explosion energies are ~1.3-1.5 10^51 erg.

astro-ph↗

arXiv2006

On the Evolution of Thermonuclear Flames on Large Scales

The thermonuclear explosion of a massive white dwarf in a Type Ia supernova explosion is characterized by vastly disparate spatial and temporal scales. The extreme dynamic range inherent to the problem prevents the use of direct numerical simulation and forces modelers to resort to subgrid models to describe physical processes taking place on unresolved scales. We consider the evolution of a model thermonuclear flame in a constant gravitational field on a periodic domain. The gravitational acceleration is aligned with the overall direction of the flame propagation, making the flame surface subject to the Rayleigh-Taylor instability. The flame evolution is followed through an extended initial transient phase well into the steady-state regime. The properties of the evolution of flame surface are examined. We confirm the form of the governing equation of the evolution suggested by Khokhlov (1995). The mechanism of vorticity production and the interaction between vortices and the flame surface are discussed. The results of our investigation provide the bases for revising and extending previous subgrid-scale model.

astro-ph↗

arXiv2005

Hybrid Characteristics: 3D radiative transfer for parallel adaptive mesh refinement hydrodynamics

We have developed a three-dimensional radiative transfer method designed specifically for use with parallel adaptive mesh refinement hydrodynamics codes. This new algorithm, which we call hybrid characteristics, introduces a novel form of ray tracing that can neither be classified as long, nor as short characteristics, but which applies the underlying principles, i.e. efficient execution through interpolation and parallelizability, of both. Primary applications of the hybrid characteristics method are radiation hydrodynamics problems that take into account the effects of photoionization and heating due to point sources of radiation. The method is implemented in the hydrodynamics package FLASH. The ionization, heating, and cooling processes are modelled using the DORIC ionization package. Upon comparison with the long characteristics method, we find that our method calculates the column density with a similarly high accuracy and produces sharp and well defined shadows. We show the quality of the new algorithm in an application to the photoevaporation of multiple over-dense clumps. We present several test problems demonstrating the feasibility of our method for performing high resolution three-dimensional radiation hydrodynamics calculations that span a large range of scales. Initial performance tests show that the ray tracing part of our method takes less time to execute than other parts of the calculation (e.g. hydrodynamics and adaptive mesh refinement), and that a high degree of efficiency is obtained in parallel execution. Although the hybrid characteristics method is developed for problems involving photoionization due to point sources, the algorithm can be easily adapted to the case of more general radiation fields.

astro-ph↗

arXiv2005

Spectral Signatures of Gravitationally Confined Thermonuclear Supernova Explosions

We consider some of the spectral and polarimetric signatures of the gravitational confined detonation scenario for Type Ia supernova explosions. In this model, material produced by an off-center deflagration (which itself fails to produce the explosion) forms a metal-rich atmosphere above the white dwarf surface. Using hydrodynamical simulations, we show that this atmosphere is compressed and accelerated during the subsequent interaction with the supernova ejecta. This leads ultimately to the formation of a high-velocity pancake of metal-rich material that is geometrically detached from the bulk of the ejecta. When observed at the epochs near maximum light, this absorbing pancake produces a highly blueshifted and polarized calcium IR triplet absorption feature similar to that observed in several Type~Ia supernovae. We discuss the orientation effects present in our model and contrast them to those expected in other supernova explosion models. We propose that a large sample of spectropolarimetric observations can be used to critically evaluate the different theoretical scenarios.

astro-ph↗

arXiv2004

Type Ia Supernova Explosion: Gravitationally Confined Detonation

We present a new mechanism for Type Ia supernova explosions in massive white dwarfs. The proposed scenario follows from relaxing the assumption of symmetry in the model and involves a detonation created in an unconfined environment. The explosion begins with an essentially central ignition of stellar material initiating a deflagration. This deflagration results in the formation of a buoyantly-driven bubble of hot material that reaches the stellar surface at supersonic speeds. The bubble breakout forms a strong pressure wave that laterally accelerates fuel-rich outer stellar layers. This material, confined by gravity to the white dwarf, races along the stellar surface and is focused at the location opposite to the point of the bubble breakout. These streams of nuclear fuel carry enough mass and energy to trigger a detonation just above the stellar surface. The flow conditions at that moment support a detonation that will incinerate the white dwarf and result in an energetic explosion. The stellar expansion following the deflagration redistributes stellar mass in a way that ensures production of intermediate mass and iron group elements consistent with observations. The ejecta will have a strongly layered structure with a mild amount of asymmetry following from the early deflagration phase. This asymmetry, combined with the amount of stellar expansion determined by details of the evolution (principally the energetics of deflagration, timing of detonation, and structure of the progenitor), can be expected to create a family of mildly diverse Type Ia supernova explosions.

astro-ph↗

arXiv1999

Reconstructing Cosmic Peculiar Velocities from the Mildly Nonlinear Density Field

We present a numerical study of the cosmic density vs. velocity divergence relation (DVDR) in the mildly non-linear regime. We approximate the dark matter as a non-relativistic pressureless fluid, and solve its equations of motion on a grid fixed in comoving coordinates. Unlike N-body schemes, this method yields directly the volume-averaged velocity field. The results of our simulations are compared with the predictions of the third-order perturbation theory (3PT) for the DVDR. We investigate both the mean `forward' relation (density in terms of velocity divergence) and the mean `inverse' relation (velocity divergence in terms of density), with emphasis on the latter. On scales larger than about 20 megaparsecs, our code recovers the predictions of 3PT remarkably well, significantly better than recent N-body simulations. On scales of a few megaparsecs, the DVDR predicted by 3PT differs slightly from the simulated one. In particular, approximating the inverse DVDR by a third-order polynomial turns out to be a poor fit. We propose a simple analytical description of the inverse relation, which works well for mildly non-linear scales.

astro-ph↗