arXiv subjects

Tomi Westerlund

Publications and source records attributed to Tomi Westerlund.

82 records · Page 5Linked to original sources

arXiv2020

Blockchain-Powered Collaboration in Heterogeneous Swarms of Robots

One of the key challenges in the collaboration within heterogeneous multi-robot systems is the optimization of the amount and type of data to be shared between robots with different sensing capabilities and computational resources. In this paper, we present a novel approach to managing collaboration terms in heterogeneous multi-robot systems with blockchain technology. Leveraging the extensive research of consensus algorithms in the blockchain domain, we exploit key technologies in this field to be integrated for consensus in robotic systems. We propose the utilization of proof of work systems to have an online estimation of the available computational resources at different robots. Furthermore, we define smart contracts that integrate information about the environment from different robots in order to evaluate and rank the quality and accuracy of each of the robots' sensor data. This means that the key parameters involved in heterogeneous robotic collaboration are integrated within the Blockchain and estimated at all robots equally without explicitly sharing information about the robots' hardware or sensors. Trustability is based on the verification of data samples that are submitted to the blockchain within each data exchange transaction and validated by other robots operating in the same environment. Initial results are reported which show the viability of the concepts presented in this paper.

cs.CR↗

arXiv2020

Enhancing Autonomy with Blockchain and Multi-Access Edge Computing in Distributed Robotic Systems

This conceptual paper discusses how different aspects involving the autonomous operation of robots and vehicles will change when they have access to next-generation mobile networks. 5G and beyond connectivity is bringing together a myriad of technologies and industries under its umbrella. High-bandwidth, low-latency edge computing services through network slicing have the potential to support novel application scenarios in different domains including robotics, autonomous vehicles, and the Internet of Things. In particular, multi-tenant applications at the edge of the network will boost the development of autonomous robots and vehicles offering computational resources and intelligence through reliable offloading services. The integration of more distributed network architectures with distributed robotic systems can increase the degree of intelligence and level of autonomy of connected units. We argue that the last piece to put together a services framework with third-party integration will be next-generation low-latency blockchain networks. Blockchains will enable a transparent and secure way of providing services and managing resources at the Multi-Access Edge Computing (MEC) layer. We overview the state-of-the-art in MEC slicing, distributed robotic systems and blockchain technology to define a framework for services the MEC layer that will enhance the autonomous operations of connected robots and vehicles.

cs.DC↗

arXiv2020

Blockchain for Mobile Edge Computing: Consensus Mechanisms and Scalability

Mobile edge computing (MEC) and next-generation mobile networks are set to disrupt the way intelligent and autonomous systems are interconnected. This will have an effect on a wide range of domains, from the Internet of Things to autonomous mobile robots. The integration of such a variety of MEC services in a inherently distributed architecture requires a robust system for managing hardware resources, balancing the network load and securing the distributed applications. Blockchain technology has emerged a solution for managing MEC services, with consensus protocols and data integrity checks that enable transparent and efficient distributed decision-making. In addition to transparency, the benefits from a security point of view are evident. Nonetheless, blockchain technology faces significant challenges in terms of scalability. In this chapter, we review existing consensus protocols and scalability techniques in both well-established and next-generation blockchain architectures. From this, we evaluate the most suitable solutions for managing MEC services and discuss the benefits and drawbacks of the available alternatives.

cs.DC↗

arXiv2020

Localization in Unstructured Environments: Towards Autonomous Robots in Forests with Delaunay Triangulation

Autonomous harvesting and transportation is a long-term goal of the forest industry. One of the main challenges is the accurate localization of both vehicles and trees in a forest. Forests are unstructured environments where it is difficult to find a group of significant landmarks for current fast feature-based place recognition algorithms. This paper proposes a novel approach where local observations are matched to a general tree map using the Delaunay triangularization as the representation format. Instead of point cloud based matching methods, we utilize a topology-based method. First, tree trunk positions are registered at a prior run done by a forest harvester. Second, the resulting map is Delaunay triangularized. Third, a local submap of the autonomous robot is registered, triangularized and matched using triangular similarity maximization to estimate the position of the robot. We test our method on a dataset accumulated from a forestry site at Lieksa, Finland. A total length of 2100\,m of harvester path was recorded by an industrial harvester with a 3D laser scanner and a geolocation unit fixed to the frame. Our experiments show a 12\,cm s.t.d. in the location accuracy and with real-time data processing for speeds not exceeding 0.5\,m/s. The accuracy and speed limit is realistic during forest operations.

cs.RO↗

arXiv2020

AutoSOS: Towards Multi-UAV Systems Supporting Maritime Search and Rescue with Lightweight AI and Edge Computing

Rescue vessels are the main actors in maritime safety and rescue operations. At the same time, aerial drones bring a significant advantage into this scenario. This paper presents the research directions of the AutoSOS project, where we work in the development of an autonomous multi-robot search and rescue assistance platform capable of sensor fusion and object detection in embedded devices using novel lightweight AI models. The platform is meant to perform reconnaissance missions for initial assessment of the environment using novel adaptive deep learning algorithms that efficiently use the available sensors and computational resources on drones and rescue vessel. When drones find potential objects, they will send their sensor data to the vessel to verity the findings with increased accuracy. The actual rescue and treatment operation are left as the responsibility of the rescue personnel. The drones will autonomously reconfigure their spatial distribution to enable multi-hop communication, when a direct connection between a drone transmitting information and the vessel is unavailable.

cs.RO↗

arXiv2020

End-to-End Design for Self-Reconfigurable Heterogeneous Robotic Swarms

More widespread adoption requires swarms of robots to be more flexible for real-world applications. Multiple challenges remain in complex scenarios where a large amount of data needs to be processed in real-time and high degrees of situational awareness are required. The options in this direction are limited in existing robotic swarms, mostly homogeneous robots with limited operational and reconfiguration flexibility. We address this by bringing elastic computing techniques and dynamic resource management from the edge-cloud computing domain to the swarm robotics domain. This enables the dynamic provisioning of collective capabilities in the swarm for different applications. Therefore, we transform a swarm into a distributed sensing and computing platform capable of complex data processing tasks, which can then be offered as a service. In particular, we discuss how this can be applied to adaptive resource management in a heterogeneous swarm of drones, and how we are implementing the dynamic deployment of distributed data processing algorithms. With an elastic drone swarm built on reconfigurable hardware and containerized services, it will be possible to raise the self-awareness, degree of intelligence, and level of autonomy of heterogeneous swarms of robots. We describe novel directions for collaborative perception, and new ways of interacting with a robotic swarm.

cs.RO↗

arXiv2020

UWB-Based Localization for Multi-UAV Systems and Collaborative Heterogeneous Multi-Robot Systems: a Survey

Ultra-wideband technology has emerged in recent years as a robust solution for localization in GNSS denied environments. In particular, its high accuracy when compared to other wireless localization solutions is enabling a wider range of collaborative and multi-robot application scenarios, being able to replace more complex and expensive motion-capture areas for use cases where accuracy in the order of tens of centimeters is sufficient. We present the first survey of UWB-based localization focused on multi-UAV systems and heterogeneous multi-robot systems. We have found that previous literature reviews do not consider in-depth the challenges in both aerial navigation and navigation with multiple robots, but also in terms of heterogeneous multi-robot systems. In particular, this is, to the best of our knowledge, the first survey to review recent advances in UWB-based (i) methods that enable ad-hoc and dynamic deployments; (ii) collaborative localization techniques; and (iii) cooperative sensing and cooperative maneuvers such as UAV docking on mobile platforms. Finally, we also review existing datasets and discuss the potential of this technology for both localization in GNSS-denied environments and collaboration in multi-robot systems.

eess.SP↗

arXiv2020

Multi-Scale Supervised 3D U-Net for Kidneys and Kidney Tumor Segmentation

Accurate segmentation of kidneys and kidney tumors is an essential step for radiomic analysis as well as developing advanced surgical planning techniques. In clinical analysis, the segmentation is currently performed by clinicians from the visual inspection images gathered through a computed tomography (CT) scan. This process is laborious and its success significantly depends on previous experience. Moreover, the uncertainty in the tumor location and heterogeneity of scans across patients increases the error rate. To tackle this issue, computer-aided segmentation based on deep learning techniques have become increasingly popular. We present a multi-scale supervised 3D U-Net, MSS U-Net, to automatically segment kidneys and kidney tumors from CT images. Our architecture combines deep supervision with exponential logarithmic loss to increase the 3D U-Net training efficiency. Furthermore, we introduce a connected-component based post processing method to enhance the performance of the overall process. This architecture shows superior performance compared to state-of-the-art works using data from KiTS19 public dataset, with the Dice coefficient of kidney and tumor up to 0.969 and 0.805 respectively. The segmentation techniques introduced in this paper have been tested in the KiTS19 challenge with its corresponding dataset.

eess.IV↗

arXiv2020

Autocalibration of a Mobile UWB Localization System for Ad-Hoc Multi-Robot Deployments in GNSS-Denied Environments

Ultra-wideband (UWB) wireless technology has seen an increased penetration in the robotics field as a robust localization method in recent years. UWB enables high accuracy distance estimation from time-of-flight measurements of wireless signals, even in non-line-of-sight measurements. UWB-based localization systems have been utilized in various types of GNSS-denied environments for ground or aerial autonomous robots. However, most of the existing solutions rely on a fixed and well-calibrated set of UWB nodes, or anchors, to estimate accurately the position of other mobile nodes, or tags, through multilateration. This limits the applicability of such systems for dynamic and ad-hoc deployments, such as post-disaster scenarios where the UWB anchors could be mounted on mobile robots to aid the navigation of UAVs or other robots. We introduce a collaborative algorithm for online autocalibration of anchor positions, enabling not only ad-hoc deployments but also movable anchors, based on Decawave's DWM1001 UWB module. Compared to the built-in autocalibration process from Decawave, we drastically reduce the amount of calibration time and increase the accuracy at the same time. We provide both experimental measurements and simulation results to demonstrate the usability of this algorithm.

cs.RO↗

arXiv2019

Particle Telescope aboard FORESAIL-1: simulated performance

The Particle Telescope (PATE) of FORESAIL-1 mission is described. FORESAIL-1 is a CubeSat mission to polar Low Earth Orbit. Its scientific objectives are to characterize electron precipitation from the radiation belts and to observe energetic neutral atoms (ENAs) originating from the Sun during the strongest solar flares. For that purpose, the 3-unit CubeSat carries a particle telescope that measures energetic electrons in the nominal energy range of 80--800 keV in seven energy channels and energetic protons at 0.3--10 MeV in ten channels. In addition, particles penetrating the whole telescope at higher energies will be measured in three channels: one $>$800 keV electron channel, two integral proton channels at $>$10 MeV energies. The instrument contains two telescopes at right angles to each other, one measuring along the spin axis of the spacecraft and one perpendicular to it. During a spin period (nominally 15 s), the rotating telescope will, thus, deliver angular distributions of protons and electrons, at 11.25-degree clock-angle resolution, which enables one to accurately determine the pitch-angle distribution and separate the trapped and precipitating particles. During the last part of the mission, the rotation axis will be accurately pointed toward the Sun, enabling the measurement of the energetic hydrogen from that direction. Using the geomagnetic field as a filter and comparing the rates observed by the two telescopes, the instrument can observe the solar ENA flux for events similar to the only one so far observed in December 2006. We present the Geant4-simulated energy and angular response functions of the telescope and assess its sensitivity showing that they are adequate to address the scientific objectives of the mission.

astro-ph.IM↗