arXiv subjects

Tomislav Suligoj

Publications and source records attributed to Tomislav Suligoj.

4 recordsLinked to original sources

arXiv2026

First results of a Monolithic Active Pixel Sensor with Internal Signal Gain Fully Integrated in a 180 nm CMOS Technology

Dense tracking environments in experiments at CERN's High-Luminosity LHC and future FCC experiments call for an increased use of timing information in addition to the position measurement of pixel detectors. This adds one dimension to the information available, and is essential for pile-up mitigation at high luminosity. The CASSIA sensor project (CMOS Active SenSor with Internal Amplification) focuses on the development of pixel matrices with internal charge multiplication based on monolithic CMOS sensor technologies suitable for application as charged particle tracking and timing detectors. CMOS sensors with in-pixel internal amplification would result in higher signal amplitudes having an improved signal-to-noise ratio, better time resolution and increased sensitivity, making them attractive for high-radiation environments. Their monolithic integration in small pixels reduces the input capacitance of a front-end amplifier and power dissipation making it suitable for fine-pitch low-power detectors. Fast signal rise time due to internal charge amplification improves the response time and timing resolution, all of which makes such a technology attractive for future 4D tracking applications in HEP experiments. This paper presents the first results of the CASSIA sensor, a novel MAPS which uses gain layers fully integrated in a 180nm imaging process to achieve internal signal amplification. In the first measurements presented here we demonstrate the gain behaviour of different pixel implant designs and show that the sensor can be operated with low gain proportional mode as LGAD sensor at lower voltages and as SPAD sensor at higher voltages.

physics.ins-det↗

arXiv2023

Radiation Hardness of MALTA2 Monolithic CMOS Sensors on Czochralski Substrates

MALTA2 is the latest full-scale prototype of the MALTA family of Depleted Monolithic Active Pixel Sensors (DMAPS) produced in Tower Semiconductor 180 nm CMOS technology. In order to comply with the requirements of High Energy Physics (HEP) experiments, various process modifications and front-end changes have been implemented to achieve low power consumption, reduce Random Telegraph Signal (RTS) noise, and optimise the charge collection geometry. Compared to its predecessors, MALTA2 targets the use of a high-resistivity, thick Czochralski (Cz) substrates in order to demonstrate radiation hardness in terms of detection efficiency and timing resolution up to 3E15 1 MeV neq/cm2 with backside metallisation to achieve good propagation of the bias voltage. This manuscript shows the results that were obtained with non-irradiated and irradiated MALTA2 samples on Cz substrates from the CERN SPS test beam campaign from 2021-2023 using the MALTA telescope.

physics.ins-det↗

arXiv2023

Performance of the MALTA Telescope

MALTA is part of the Depleted Monolithic Active Pixel sensors designed in Tower 180nm CMOS imaging technology. A custom telescope with six MALTA planes has been developed for test beam campaigns at SPS, CERN, with the ability to host several devices under test. The telescope system has a dedicated custom readout, online monitoring integrated into DAQ with realtime hit map, time distribution and event hit multiplicity. It hosts a dedicated fully configurable trigger system enabling to trigger on coincidence between telescope planes and timing reference from a scintillator. The excellent time resolution performance allows for fast track reconstruction, due to the possibility to retain a low hit multiplicity per event which reduces the combinatorics. This paper reviews the architecture of the system and its performance during the 2021 and 2022 test beam campaign at the SPS North Area.

hep-ex↗

arXiv2022

Recent results with radiation-tolerant TowerJazz 180 nm MALTA Sensors

To achieve the physics goals of future colliders, it is necessary to develop novel, radiation-hard silicon sensors for their tracking detectors. We target the replacement of hybrid pixel detectors with Depleted Monolithic Active Pixel Sensors (DMAPS) that are radiation-hard, monolithic CMOS sensors. We have designed, manufactured and tested the MALTA series of sensors, which are DMAPS in the 180 nm TowerJazz CMOS imaging technology. MALTA have a pixel pitch well below current hybrid pixel detectors, high time resolution (< 2 ns) and excellent charge collection efficiency across pixel geometries. These sensors have a total silicon thickness of between 50-300 $μ$m, implying reduced material budgets and multiple scattering rates for future detectors which utilize such technology. Furthermore, their monolithic design bypasses the costly stage of bump-bonding in hybrid sensors and can substantially reduce detector costs. This contribution presents the latest results from characterization studies of the MALTA2 sensors, including results demonstrating the radiation tolerance of these sensors.

physics.ins-det↗