arXiv subjects

Tommaso Confalone

Publications and source records attributed to Tommaso Confalone.

12 recordsLinked to original sources

arXiv2026

Resolving unconventional gap structure in kagome superconductors with hybrid microwave circuits

Unconventional superconductivity is a hallmark of exotic quantum matter, where determining the pairing symmetry is essential for uncovering its microscopic origin. Kagome superconductors provide a fertile landscape for emergent phenomena arising from strong electronic correlations and nontrivial band topology, yet their superconducting pairing symmetry remains elusive. The superconducting gap structure is commonly probed via electrodynamic response, but such measurements are inapplicable to thin flakes due to their small volume and delicate nature. Superconducting microwave resonators offer a coherent and highly sensitive platform for probing electrodynamic responses, with versatile designs that enable incorporation of diverse materials and geometries. Here, we integrate flakes into microwave circuits, enabling noninvasive access to the superfluid response through contactless coupling that preserves structural integrity. By engineering the device geometry to suppress parasitic two-level-system losses that dominate dissipation in microwave circuits, we isolate the intrinsic material response. Remarkably, the temperature-dependent superfluid density exhibits linear behavior at low temperatures, consistent with a nodal gap structure. Our approach establishes a noninvasive platform for probing electrodynamic response of fragile superconducting flakes while advancing hybrid microwave architectures for quantum technologies.

cond-mat.supr-con↗

arXiv2026

Simplified Silicon Nitride Nanomembrane Circuits for van der Waals Integration

Two-dimensional (2D) materials and van der Waals (vdW) heterostructures provide an exceptional platform for engineering quantum devices, yet realizing their potential requires electrical integration without compromising the pristine properties of atomically thin crystals through conventional nanofabrication. Transferable circuitry addresses this challenge by decoupling circuit fabrication from device assembly, enabling electrical contacting without directly processing the active material. Here, we introduce SiN$_x$ nanomembrane (NMB) circuits realized through a simplified top-down strategy that reduces fabrication complexity, processing steps and specialized tools required by our previous bottom-up approach. As a stringent benchmark of material preservation, we electrically integrate a four-unit-cell-thick, optimally doped Bi$_2$Sr$_{2-x}$La$_x$CuO$_{6+\delta}$ (Bi2201) flake and observe a superconducting transition at T$_c^{inf}$~32K, close to the T$_c^{onset}$~34K measured by susceptibility in the parent crystals. The preservation of superconductivity demonstrates electrical integration of fragile layered materials without direct exposure to conventional cleanroom procedures, providing a versatile platform for integrating increasingly complicated vdW heterostructures, moir\'e materials, and hybrid quantum architectures.

cond-mat.supr-con↗

arXiv2026

Dynamics of Charge-Density-Wave puddles in 2$H$-NbSe$_2$

Electronic phases in quantum materials are often governed by nanoscale inhomogeneity, where local order develops within spatially confined regions or puddles. A prominent example is an incommensurate charge-density-wave (I-CDW) that comprises locally commensurate domains. In 2$H$-NbSe$_2$, such an I-CDW state persists alongside lattice anharmonicity and superconductivity, raising fundamental questions about the dynamical stabilization of CDW order in puddles. Here, we probe the puddle-dynamics in 2$H$-NbSe$_2$. Raman scattering reveals a strong Fano-coupling between the interlayer shear vibration and the CDW amplitude mode. Time-resolved reflectivity measurement shows a low-frequency ~0.15 THz coherent overdamped oscillation onsetting within the CDW regime at ~17 K, pointing towards a so far unexplored transition. This we identify as a Fano-coupled phonon-CDW hybrid emerging from the collective dynamics of CDW puddles. We establish a framework for capturing intertwinned glassy dynamics with an overdamped oscillatory model. Such dynamics in 2H-NbSe2 highlight how lattice pinning and electronic correlations in layered materials affect the CDW order, which is crucial for the design of novel Van der Waals devices.

cond-mat.str-el↗

arXiv2025

Quantifying Twist Angles in Cuprate Heterostructures with Anisotropic Raman Signatures

Artificially engineered twisted van der Waals (vdW) heterostructures have unlocked new pathways for exploring emergent quantum phenomena and strongly correlated electronic states. Many of these phenomena are highly sensitive to the twist angle, which can be deliberately tuned to tailor the interlayer interactions. This makes the twist angle a critical tunable parameter, emphasizing the need for precise control and accurate characterization during device fabrication. In particular, twisted cuprate heterostructures based on Bi2Sr2CaCu2O8+x have demonstrated angle-dependent superconducting properties, positioning the twist angle as a key tunable parameter. However, the twisted interface is highly unstable under ambient conditions and vulnerable to damage from conventional characterization tools such as electron microscopy or scanning probe techniques. In this work, we introduce a fully non-invasive, polarization-resolved Raman spectroscopy approach for determining twist angles in artificially stacked BSCCO heterostructures. By analyzing twist-dependent anisotropic vibrational Raman modes, particularly utilizing the out-of-plane A1g vibrational mode of Bi/Sr at 116 cm-1, we identify clear optical fingerprints of the rotational misalignment between cuprate layers. Our high-resolution confocal Raman setup, equipped with polarization control and RayShield filtering down to 10 cm-1, allows for reliable and reproducible measurements without compromising the material's structural integrity.

cond-mat.supr-con↗

arXiv2025

Preserving the Josephson Coupling of Twisted Cuprate Junctions via Tailored Silicon Nitride Circuits Boards

Controlled fabrication of twisted van der Waals heterostructures is essential to unlock the full potential of moire materials. However, achieving reproducibility remains a major challenge, particularly for air-sensitive materials such as $Bi_{2}Sr_{2}CaCu_{2}O_{8+\delta}$ (BSCCO), where it is crucial to preserve the intrinsic and delicate superconducting properties of the interface throughout the entire fabrication process. Here, we present a dry, inert and cryogenic assembly method that combines silicon nitride nanomembranes (NMBs) with pre-patterned electrodes and the cryogenic stacking technique (CST) to fabricate high-quality twisted BSCCO Josephson junctions (JJs). This protocol prevents thermal and chemical degradation during both interface formation and electrical contact integration. We also find that asymmetric membrane designs, such as a double cantilever, effectively suppress vibration-induced disorder due to wire bonding, resulting in sharp and hysteretic current-voltage characteristics. The junctions exhibit a twist-angle-dependent Josephson coupling with magnitudes comparable to the highest-performing devices reported to date, but achieved through a straightforward and versatile contact method, offering a scalable and adaptable platform for future applications. These findings highlight the importance of both interface and contact engineering in addressing reproducibility in superconducting van der Waals heterostructures.

cond-mat.supr-con↗

arXiv2025

Cuprate Twistronics for Quantum Hardware

Recent advances in the manipulation of complex oxide layers, particularly the fabrication of atomically thin cuprate superconducting films via molecular beam epitaxy, have revealed new ways in which nanoscale engineering can govern superconductivity and its interwoven electronic orders. In parallel, the creation of twisted cuprate heterostructures through cryogenic stacking techniques marks a pivotal step forward, exploiting cuprate superconductors to deepen our understanding of exotic quantum states and propel next-generation quantum technologies. This review explores over three decades of research in the emerging field of cuprate twistronics, examining both experimental breakthroughs and theoretical progress. It also highlights the methodologies poised to surmount the outstanding challenges in leveraging these complex quantum materials, underscoring their potential to expand the frontiers of quantum science and technology.

cond-mat.supr-con↗

arXiv2024

Evolution of dissipative regimes in atomically thin $\text{Bi}_{2}\text{Sr}_{2}\text{CaCu}_{2}\text{O}_{8+x}$ superconductor

Thermoelectric transport has been widely used to study Abrikosov vortex dynamics in unconventional superconductors. However, only a few thermoelectric studies have been conducted near the dimensional crossover that occurs when the vortex-vortex interaction length scale becomes comparable to the sample size. Here we report the effects of finite size on the dissipation mechanisms of the Nernst effect in the optimally doped $\text{Bi}_{2}\text{Sr}_{2}\text{CaCu}_{2}\text{O}_{8+x}$ high-temperature superconductor, down to the atomic length limit. To access this regime, we develop a new generation of thermoelectric chips based on silicon nitride microprinted circuit boards. These chips ensure optimized signals while preventing sample deterioration. Our results demonstrate that lateral confinement at the nanoscale can effectively reduce vortex dissipation. Investigating vortex dissipation at the micro- and nano-scale is essential for creating stable, miniaturized superconducting circuits.

cond-mat.supr-con↗

arXiv2024

Exploring van der Waals cuprate superconductors using a hybrid microwave circuit

The advent of two-dimensional van der Waals materials is a frontier of condensed matter physics and quantum devices. However, characterizing such materials remains challenging due to the limitations of bulk material techniques, necessitating the development of specialized methods. In this study, we investigate the superconducting properties of Bi2Sr2CaCu2O8+x flakes by integrating them with a hybrid superconducting microwave resonator. The hybrid resonator is significantly modified by the interaction with the flake while maintaining a high quality factor. We also observe a significant upshift of the resonator frequency with increasing temperature, as well as a positive nonlinearity. These effects originate from a presently unknown microscopic mechanism within the flake, and can be modeled as a two-level system bath interacting with the resonant mode. Our findings open a path for high quality hybrid circuits with van der Waals flakes for exploring novel materials and developing new devices for quantum technology.

cond-mat.supr-con↗

arXiv2023

Hall-effect in the MnBi_2Te_4 crystal using silicon nitride nanomembrane via contacts

Utilizing an interplay between band topology and intrinsic magnetism, the two-dimensional van der Waals (vdW) system MnBi_2Te_4 provides an ideal platform for realizing exotic quantum phenomena and offers great opportunities in the emerging field of antiferromagnetic spintronic technology. Yet, the fabrication of MnBi_2Te_4-based nanodevices is hindered by the high sensitivity of this material, which quickly degrades when exposed to air or to elevated temperatures. Here, we demonstrate an alternative route of fabricating vdW-MnBi_2Te_4-based electronic devices using the cryogenic dry transfer of a printable circuit embedded in an inorganic silicon nitride membrane. The electrical connections between the thin crystal and the top surface of the membrane are established through via contacts. Our magnetotransport study reveals that this innovative via contact approach enables exploring the MnBi_2Te_4-like sensitive 2D materials and engineering synthetic heterostructures as well as complex circuits based on the two-dimensional vdW systems.

cond-mat.mtrl-sci↗

arXiv2023

2D high temperature superconductor integration in contact printed circuit boards

Inherent properties of superconducting Bi2Sr2CaCu2O8+x films, such as the high superconducting transition temperature Tc, efficient Josephson coupling between neighboring CuO layers, and fast quasiparticle relaxation dynamics, make them a promising platform for advances in quantum computing and communication technologies. However, preserving two-dimensional superconductivity during device fabrication is an outstanding experimental challenge because of the fast degradation of the superconducting properties of two-dimensional flakes when they are exposed to moisture, organic sol vents, and heat. Here, to realize superconducting devices utilizing two-dimensional superconducting films, we develop a novel fabrication technique relying on the cryogenic dry transfer of printable circuits embedded into a silicon nitride membrane. This approach separates the circuit fabrication stage requiring chemically reactive substances and ionizing physical processes from the creation of the thin superconducting structures. Apart from providing electrical contacts in a single transfer step, the membrane encapsulates the surface of the crystal shielding it from the environment. The fabricated atomically thin Bi2Sr2CaCu2O8+x-based devices show high superconducting transition temperature Tc ~ 91 K close to that of the bulk crystal and demonstrate stable super conducting properties

cond-mat.supr-con↗

arXiv2023

Twisted cuprate van der Waals heterostructures with controlled Josephson coupling

Twisted van der Waals (vdW) heterostructures offer a unique platform for engineering the efficient Josephson coupling between cuprate thin crystals harboring the nodal superconducting order parameter. Preparing vdW heterostructures-based Josephson junction comprising stacked cuprates requires maintaining an ordered interface with preserved surface superconductivity. Here, we report the preparation of the Josephson junction out of the stacked Bi2Sr2CuCa2O8+d crystals using the cryogenic dry transfer technique and encapsulating the junction with an insulating layer, that protects the interface during the electrical contacts evaporation at the 10-6 mbar base pressure. We find that the Josephson critical current Ic has a maximum at low twist angles, comparable to that of the bulk intrinsic Josephson junctions, and is reduced by two orders of magnitude at twist angles close to 45{\deg}. The reduction of Ic occurs due to a mismatch between superconducting d-wave order parameters, which suppresses the direct Cooper pair tunneling.

cond-mat.supr-con↗

arXiv2023

Encapsulating high-temperature superconducting twisted van der Waals heterostructures blocks detrimental effects of disorder

High-temperature cuprate superconductors-based van der Waals (vdW) heterostructures hold high technological promise. One of the obstacles hindering progress is the detrimental effect of disorder on the properties of Josephson junctions (JJ) realized by the vdW devices. Here we report the new method of fabricating twisted vdW heterostructures made of Bi2Sr2CuCa2O8+d, crucially improving the JJ characteristics, pushing them up to those of the intrinsic JJs in bulk samples. The method combines a cryogenic stacking using a solvent-free stencil mask technique and covering interface by the insulating hexagonal boron nitride crystals. Despite the high-vacuum condition down to 10-6 mbar in the evaporation chamber, the interface appears to be protected from water molecules during the in-situ metal deposition only when fully encapsulated. Comparing the current-voltage curves of encapsulated and unencapsulated interfaces, we reveal that the encapsulated interfaces' characteristics are crucially improved so that the corresponding JJs demonstrate high critical currents and sharpness of the superconducting transition comparable to those of the intrinsic JJs. Finally, we show that the encapsulated heterostructures are more stable in time.

cond-mat.supr-con↗