arXiv subjects

Tomoaki Matsumoto

Publications and source records attributed to Tomoaki Matsumoto.

At least 91 records · Page 5Linked to original sources

arXiv2007

Self-gravitational Magnetohydrodynamics with Adaptive Mesh Refinement for Protostellar Collapse

A new numerical code, called SFUMATO, for solving self-gravitational magnetohydrodynamics (MHD) problems using adaptive mesh refinement (AMR) is presented. A block-structured grid is adopted as the grid of the AMR hierarchy. The total variation diminishing (TVD) cell-centered scheme is adopted as the MHD solver, with hyperbolic cleaning of divergence error of the magnetic field also implemented. The self-gravity is solved by a multigrid method composed of (1) full multigrid (FMG)-cycle on the AMR hierarchical grids, (2) V-cycle on these grids, and (3) FMG-cycle on the base grid. The multigrid method exhibits spatial second-order accuracy, fast convergence, and scalability. The numerical fluxes are conserved by using a refluxing procedure in both the MHD solver and the multigrid method. The several tests are performed indicating that the solutions are consistent with previously published results.

astro-ph↗

arXiv2007

Formation Scenario for Wide and Close Binary Systems

Fragmentation and binary formation processes are studied using three-dimensional resistive MHD nested grid simulations. Starting with a Bonnor-Ebert isothermal cloud rotating in a uniform magnetic field, we calculate the cloud evolution from the molecular cloud core (n=10^4 cm^-3) to the stellar core (n \simeq 10^22 cm^-3). We calculated 147 models with different initial magnetic, rotational, and thermal energies, and the amplitudes of the non-axisymmetric perturbation. In a collapsing cloud, fragmentation is mainly controlled by the initial ratio of the rotational to the magnetic energy, regardless of the initial thermal energy and amplitude of the non-axisymmetric perturbation. When the clouds have large rotational energies in relation to magnetic energies, fragmentation occurs in the low-density evolution phase (10^12 cm^-3 < n < 10^15 cm^-3) with separations of 3-300 AU. Fragments that appeared in this phase are expected to evolve into wide binary systems. On the other hand, fragmentation does not occur in the low-density evolution phase, when initial clouds have large magnetic energies in relation to the rotational energies. In these clouds, fragmentation only occurs in the high-density evolution phase (n > 10^17 cm^-3) after the clouds experience significant reduction of the magnetic field owing to Ohmic dissipation in the period of 10^12 cm^-3 < n < 10^15 cm^-3. Fragments appearing in this phase have separations of < 0.3 AU, and are expected to evolve into close binary systems. As a result, we found two typical fragmentation epochs, which cause different stellar separations. Although these typical separations are disturbed in the subsequent gas accretion phase, we might be able to observe two peaks of binary separations in extremely young stellar groups.

astro-ph↗

arXiv2007

Magnetic Fields and Rotations of Protostars

The evolution of the magnetic field and angular momentum in the collapsing cloud core is studied using three-dimensional resistive MHD nested grid simulations. Starting with a Bonnor-Ebert isothermal cloud rotating in a uniform magnetic field, we calculate the cloud evolution from the molecular cloud core (n=10^4 cm^-3) to the stellar core (n \simeq 10^22 cm^-3). The magnetic field strengths at the center of the clouds converge to a certain value as the clouds collapse, when the clouds have the same angular momenta but different strengths of the magnetic fields at the initial state. For 10^12 cm^-3 < n < 10^16 cm^-3, Ohmic dissipation considerably removes the magnetic field from the collapsing cloud core, and the magnetic field lines, which are strongly twisted for n <10^12 cm^-3, is de-collimated. The magnetic field lines are twisted and amplified again for nc > 10^16 cm^-3, because the magnetic field is recoupled with the warm gas. Finally, protostars at their formation epoch have 0.1-1kG of the magnetic fields, which are comparable to observations. The magnetic field strength of protostar slightly depends on the angular momentum of the host cloud. The protostar formed from the slowly rotating cloud core has a stronger magnetic field. The evolution of the angular momentum is closely related to the evolution of the magnetic field. The angular momentum in the collapsing cloud is removed by the magnetic effect. The formed protostars have 0.1-2 days of the rotation period at their formation epoch, which are slightly shorter than the observation. This indicates that the further removal mechanism of the angular momentum such as interaction between the protostar and disk, wind gas or jet is important in further evolution of the protostar.

astro-ph↗

arXiv2007

Driving Mechanism of Jets and Outflows in Star Formation Process

The driving mechanism of jets and outflows in star formation process is studied using resistive MHD nested grid simulations. We calculated cloud evolution from the molecular cloud core to the stellar core. In the collapsing cloud core, we found two distinct flows: Low-velocity flows (sim 5 km/s) with a wide opening angle, driven from the adiabatic core, and high-velocity flows (sim 30 km/s) with good collimation, driven from the protostar. High-velocity flows are enclosed by low-velocity flows after protostar formation. The difference in the degree of collimation between the two flows is caused by the strength of the magnetic field and configuration of the magnetic field lines. The magnetic field around an adiabatic core is strong and has an hourglass configuration; therefore, flows from the adiabatic core are driven mainly by the magnetocentrifugal mechanism and guided by the hourglass-like field lines. In contrast, the magnetic field around the protostar is weak and has a straight configuration owing to Ohmic dissipation in the high-density gas region. Therefore, flows from the protostar are driven mainly by the magnetic pressure gradient force and guided by straight field lines. Differing depth of the gravitational potential between the adiabatic core and the protostar cause the difference of the flow speed. Low-velocity flows correspond to the observed molecular outflows, while high-velocity flows correspond to the observed optical jets. We suggest that the outflow and the jet are driven by different cores, rather than that the outflow being entrained by the jet.

astro-ph↗

arXiv2007

Near-Infrared Imaging Polarimetry of the NGC 2071 Star Forming Region with SIRPOL

We have conducted deep JHKs imaging polarimetry of a ~8' x 8' area of the NGC 2071 star forming region. Our polarization data have revealed various infrared reflection nebulae (IRNe) associated with the central IR young star cluster NGC2071IR and identified their illuminating sources. There are at least 4 IRNe in NGC2071IR and several additional IRNe are identified around nearby young stars in the same field-of-view. Each illuminating source coincides with a known near-IR source except for IRS3, which is only a part of IRN2 and is illuminated by the radio source 1c. Aperture polarimetry of each cluster source is used to detect unresolved circumstellar disk/outflow systems. Aperture polarimetry of the other point-like sources within the field is made in this region for the first time. The magnetic field structures (from ~1 pc down to \~0.1 pc) are derived using both aperture polarimetry of the point-like sources and imaging polarimetry of the shocked H2 emission that is seen as the dominant knotty nebulae in the Ks band image; they are both of dichroic origin and the derived field directions are consistent with each other. The magnetic field direction projected on the sky is also consistent with that inferred from the 850 micron thermal continuum emission polarimetry of the central 0.2 pc region, but running roughly perpendicular (~75 degrees) to the direction of the large scale outflow. We argue that the field strength is too weak to align the outflow in the large scale field direction via magnetic braking.

astro-ph↗

arXiv2006

Outflows driven by Giant Protoplanets

We investigate outflows driven by a giant protoplanet using three-dimensional MHD nested grid simulations. We consider a local region around the protoplanet in the protoplanetary disk, and calculate three models: (a) unmagnetized disk model, (b) magnetized disk model having magnetic field azimuthally parallel to the disk, and (c) magnetic field perpendicular to the disk. Outflows with velocities, at least, 10 km/s are driven by the protoplanets in both magnetized disk models, while outflow does not appear in unmagnetized disk model. Tube-like outflows along the azimuthal direction of the protoplanetary disk appear in model with magnetic field being parallel to the disk. In this model, the magnetically dominated regions (i.e., density gap) are clearly contrasted from other regions and spiral waves appear near the protoplanet. On the other hand, in model with magnetic field being perpendicular to the disk, outflows are driven by a protoplanet with cone-like structure just as seen in the outflow driven by a protostar. Magnetic field lines are strongly twisted near the protoplanet and the outflows have well-collimated structures in this model.These outflows can be landmarks for searching exo-protoplanets in their formation stages. Our results indicate that the accretion rate onto the protoplanet tend to have a larger value than that expected from previous hydrodynamical calculations, since a fraction of the angular momentum of circum-planetary disk is removed by outflows, enhanced non-axisymmetric patterns caused by magnetic field, and magnetic braking. Possible implications for observation are also briefly discussed.

astro-ph↗

arXiv2006

The First Jet in the Universe: Protostellar Jets from the First Stars

The protostellar jets driven by the formation of the first stars are studied by using MHD nested grid simulations. Starting from a slowly rotating spherical cloud of 5.1 times 10^4 Msun permeated by a uniform magnetic field, we follow the evolution from the central number density n = 10^3 cm^-3 to n simeq 10^23 cm^-3. We calculate four models that differ in initial magnetic field strengths and angular velocities. In all models, protostars of simeq 10^-3 Msun are formed at n simeq 10^22 cm^-3 in accordance with one-dimensional calculations. By this epoch, the magnetic flux density is amplified by 10 orders of magnitude from the initial value. Consequently, the formed protostar possesses the magnetic field of \sim 10^6 G that is much larger than the flux density of the present counterparts, reflecting the fact that the dissipation of a magnetic field is ineffective in primordial gas clouds. If the initial magnetic field B > 10^-9 (n/10^3 cm^-3)^2/3 G, the protostellar jet is launched and its velocities reaches \sim 70 km s^-1 by the time the protostellar mass becomes (4-6) times 10^-3 Msun, and a fraction (3-10%) of the accreting matter is blown off from the central region. Owing to the interaction of these ejecta with surrounding matter, expanding bow shocks are created at both heads of the jet. If this jet continues to sweep out the surrounding gas that otherwise accretes onto the central star or circumstellar disk, the final mass of the first star can be substantially reduced. In addition, dense post-shock regions behind the bow shocks are expected to promote the chemical reactions (formation of H_2 and HD), and this provides possible environments for subsequent low-mass star formation in the early universe.

astro-ph↗

arXiv2006

Second Core Formation and High Speed Jets: Resistive MHD Nested Grid Simulations

The stellar core formation and high speed jets driven by the formed core are studied by using three-dimensional resistive MHD nested grid simulations. Starting with a Bonnor-Ebert isothermal cloud rotating in a uniform magnetic field, we calculate the cloud evolution from the molecular cloud core (n = 10^6 cm^-3, r_c = 4.6 times 10^4 AU) to the stellar core (n \simeq 10^23 cm^-3, r_c \simeq 1 solar radius). We resolve cloud structure over 7 orders of magnitude in spatial extent and over 17 orders of magnitude in density contrast. For comparison, we calculate two models: resistive and ideal MHD models. Both models have the same initial condition, but the former includes dissipation process of magnetic field while the latter does not. The magnetic fluxes in resistive MHD model are extracted from the first core during 10^12 cm^-3 < n < 10^16 cm^-3 by Ohmic dissipation. Magnetic flux density of the formed stellar core (n \simeq 10^20 cm^-3) in resistive MHD model is two orders of magnitude smaller than that in ideal MHD model. Since magnetic braking is less effective in resistive MHD model, rapidly rotating stellar core (the second core) is formed. After stellar core formation, the magnetic field of the core is largely amplified both by magneto-rotational instability and the shearing motion between the stellar core and ambient medium. As a consequence, high speed (simeq 45 km,s^-1) jets are driven by the second core, which results in strong mass ejection. A cocoon-like structure around the second core also forms with clear bow shocks.

astro-ph↗

arXiv2006

Evolution of Rotating Molecular Cloud Core with Oblique Magnetic Field

We studied the collapse of rotating molecular cloud cores with inclined magnetic fields, based on three-dimensional numerical simulations.The numerical simulations start from a rotating Bonnor-Ebert isothermal cloud in a uniform magnetic field. The magnetic field is initially taken to be inclined from the rotation axis. As the cloud collapses, the magnetic field and rotation axis change their directions. When the rotation is slow and the magnetic field is relatively strong, the direction of the rotation axis changes to align with the magnetic field, as shown earlier by Matsumoto & Tomisaka. When the magnetic field is weak and the rotation is relatively fast, the magnetic field inclines to become perpendicular to the rotation axis. In other words, the evolution of the magnetic field and rotation axis depends on the relative strength of the rotation and magnetic field. Magnetic braking acts to align the rotation axis and magnetic field, while the rotation causes the magnetic field to incline through dynamo action. The latter effect dominates the former when the ratio of the angular velocity to the magnetic field is larger than a critical value Ω_0/ B_0 > 0.39 G^1/2 c_s^-1, where B_0, Ω_0, G, and c_s^-1 denote the initial magnetic field, initial angular velocity, gravitational constant, and sound speed, respectively. When the rotation is relatively strong, the collapsing cloud forms a disk perpendicular to the rotation axis and the magnetic field becomes nearly parallel to the disk surface in the high density region. A spiral structure appears due to the rotation and the wound-up magnetic field in the disk.

astro-ph↗

arXiv2005

Alignment of Outflows with Magnetic Fields in Cloud Cores

We estimate the polarized thermal dust emission from MHD simulations of protostellar collapse and outflow formation in order to investigate alignment of outflows with magnetic fields. The polarization maps indicate that alignment of an outflow with the magnetic field depends on the field strength inside the cloud core; the direction of the outflow, projected on the plane of the sky, is aligned preferentially with the mean polarization vector for a cloud core with a magnetic field strength of 80 microgauss, while it does not tend to be aligned for 50 microgauss as long as the 1000 AU scale is considered. The direction of the magnetic field at the cloud center is probed by the direction of the outflow. In addition, the magnetic field at the cloud center can be revealed by ALMA even when the source is embedded deeply in the envelope. The Chandrasekhar-Fermi formula is examined using the polarization maps, indicating that the field strength predicted by the formula should be corrected by a factor of 0.24 - 0.44. The correction factor has a tendency to be lower for a cloud core with a weaker magnetic field.

astro-ph↗

arXiv2005

Collapse and Fragmentation of Rotating Magnetized Clouds. I. Magnetic Flux - Spin Relation

We discuss evolution of the magnetic flux density and angular velocity in a molecular cloud core, on the basis of three-dimensional numerical simulations, in which a rotating magnetized cloud fragments and collapses to form a very dense optically thick core of > 5 times 10 ^10 cm^-3 . As the density increases towards the formation of the optically thick core, the magnetic flux density and angular velocity converge towards a single relationship between the two quantities. If the core is magnetically dominated its magnetic flux density approaches 1.5 (n/5 times 10^10 cm^-3)^1/2 mG, while if the core is rotationally dominated the angular velocity approaches 2.57 times 10^-3, (n/5 times 10^10 cm^-3)^1/2 yr^-1, where n is the density of the gas. We also find that the ratio of the angular velocity to the magnetic flux density remains nearly constant until the density exceeds 5 times 10^10 cm^-3. Fragmentation of the very dense core and emergence of outflows from fragments are shown in the subsequent paper.

astro-ph↗

arXiv2005

Collapse and Fragmentation of Rotating Magnetized Clouds. II. Binary Formation and Fragmentation of First Cores

Subsequent to Paper I, the evolution and fragmentation of a rotating magnetized cloud are studied with use of three-dimensional MHD nested-grid simulations. After the isothermal runaway collapse, an adiabatic gas forms a protostellar first core at the center of the cloud. When the isothermal gas is stable for fragmentation in a contracting disk, the adiabatic core often breaks into several fragments. Conditions for fragmentation and binary formation are studied. All the cores which show fragmentations are geometrically thin, as the diameter-to-thickness ratio is larger than 3. Two patterns of fragmentation are found. (1) When a thin disk is supported by centrifugal force, the disk fragments through a ring configuration (ring fragmentation). This is realized in a fast rotating adiabatic core as Omega >0.2 tau_ff^-1, where Omega and tau_ff represent the angular rotation speed and the free-fall time of the core, respectively. (2) On the other hand, the disk is deformed to an elongated bar in the isothermal stage for a strongly magnetized or rapidly rotating cloud. The bar breaks into 2 - 4 fragments (bar fragmentation). Even if a disk is thin, the disk dominated by the magnetic force or thermal pressure is stable and forms a single compact body. In either ring or bar fragmentation mode, the fragments contract and a pair of outflows are ejected from the vicinities of the compact cores. The orbital angular momentum is larger than the spin angular momentum in the ring fragmentation. On the other hand, fragments often quickly merge in the bar fragmentation, since the orbital angular momentum is smaller than the spin angular momentum in this case. Comparison with observations is also shown.

astro-ph↗

arXiv2004

Simulating Astro-E2 Observations of Galaxy Clusters: the Case of Turbulent Cores Affected by Tsunamis

This is the first attempt to construct detailed X-ray spectra of clusters of galaxies from the results of high-resolution hydrodynamic simulations and simulate X-ray observations in order to study velocity fields of the intracluster medium (ICM). The hydrodynamic simulations are based on the recently proposed tsunami model, in which cluster cores are affected by bulk motions of the ICM and turbulence is produced. We note that most other solutions of the cooling flow problem also involve the generation of turbulence in cluster cores. From the mock X-ray observations with Astro-E2 XRS, we find that turbulent motion of the ICM in cluster cores could be detected with the satellite. The Doppler shifts of the metal lines could be used to discriminate among turbulence models. The gas velocities measured through the mock observations are consistent with the line-emission weighted values inferred directly from hydrodynamic simulations.

astro-ph↗

arXiv2004

The Formation of Population III Binaries

We explore the possibility for the formation of Population III binaries. The collapse of a rotating cylinder is simulated with a three-dimensional, high-resolution nested grid, assuming the thermal history of primordial gas. The simulations are done with dimensionless units, and the results are applicable to low-mass as well as massive systems by scaling with the initial density. We find that if the initial angular momentum is as small as $β\approx 0.1$, where $β$ is the ratio of centrifugal force to pressure force, then the runaway collapse of the cloud stops to form a rotationally-supported disk. After the accretion of the envelope, the disk undergoes a ring instability, eventually fragmenting into a binary. If the initial angular momentum is relatively large, a bar-type instability arises, resulting in the collapse into a single star through rapid angular momentum transfer. The present results show that a significant fraction of Pop III stars are expected to form in binary systems, even if they are quite massive or less massive. The cosmological implications of Population III binaries are briefly discussed.

astro-ph↗

arXiv2004

Directions of Outflows, Disks, Magnetic Fields, and Rotation of YSOs in Collapsing Molecular Cloud Cores

The collapse of slowly rotating molecular cloud cores threaded by magnetic fields is investigated by high-resolution numerical simulation. Outflow formation in the collapsing cloud cores is also followed. In the models examined, the cloud core and parent cloud rotate rigidly and are initially threaded by a uniform magnetic field. The simulations show that the cloud core collapses along the magnetic field lines. The magnetic field in the dense region of the cloud core rotates faster than that of the parent cloud as a consequence of spin-up of the central region during the collapse. The cloud core exhibits significant precession of the rotation axis, magnetic field, and disk orientation, with precession highest in the models with low initial field strength ($\lesssim 20 μ{\rm G}$). Precession in models with initial fields of $\sim 40 μ{\rm G}$ is suppressed by strong magnetic braking. Magnetic braking transfers angular momentum form the central region and acts more strongly on the component of angular momentum oriented perpendicular to the magnetic field. After the formation of an adiabatic core, outflow is ejected along the local magnetic field lines. Strong magnetic braking associated with the outflow causes the direction of angular momentum to converge with that of the local magnetic field, resulting in the convergence of the local magnetic field, angular momentum, outflow, and disk orientation by the outflow formation phase. The magnetic field of a young star is inclined at an angle of no more than $30^\circ$ from that of the parent cloud at initial field strengths of $\sim 20 μ{\rm G}$, while at an initial field strength of $\sim 40 μ{\rm G}$, the magnetic field of the young star is well aligned with that of the parent cloud.

astro-ph↗

arXiv2004

Strong Turbulence in the Cool Cores of Galaxy Clusters: Can Tsunamis Solve the Cooling Flow Problem?

Based on high-resolution two-dimensional hydrodynamic simulations, we show that the bulk gas motions in a cluster of galaxies, which are naturally expected during the process of hierarchical structure formation of the universe, have a serous impact on the core. We found that the bulk gas motions represented by acoustic-gravity waves create local but strong turbulence, which reproduces the complicated X-ray structures recently observed in cluster cores. Moreover, if the wave amplitude is large enough, they can suppress the radiative cooling of the cores. Contrary to the previous studies, the heating is operated by the turbulence, not weak shocks. The turbulence could be detected in near-future space X-ray missions such as ASTRO-E2.

astro-ph↗

arXiv2003

First MHD Simulation of Collapse and Fragmentation of Magnetized Molecular Cloud Cores

This is the first paper about the fragmentation and mass outflow in the molecular cloud by using three-dimensional MHD nested-grid simulations. The binary star formation process is studied paying particular attention to the fragmentation of a rotating magnetized molecular cloud. We assume an isothermal rotating and magnetized cylindrical cloud in hydrostatic balance. Non-axisymmetric as well as axisymmetric perturbations are added to the initial state and the subsequent evolutions are studied. The evolution is characterized by three parameters: the amplitude of the non-axisymmetric perturbations, the rotation speed, and the magnetic field strength. As a result, it is found that non-axisymmetry hardly evolves in the early phase, but begins to grow after the gas contracts and forms a thin disk. Disk formation is strongly promoted by the rotation speed and the magnetic field strength. There are two types of fragmentation: fragmentation from a ring and that from a bar. Thin adiabatic cores fragment if a thickness is smaller than 1/4 of the radius. For the fragments to survive, they should be formed in a heavily elongated barred core or a flat round disk. In the models showing fragmentation, outflows from respective fragments are found as well as those driven by the rotating bar or the disk.

astro-ph↗

arXiv2003

Fragmentation of a Molecular Cloud Core versus Fragmentation of the Massive Protoplanetary Disk in the Main Accretion Phase

The fragmentation of molecular cloud cores a factor of 1.1 denser than the critical Bonnor-Ebert sphere is examined though three-dimensional numerical simulations. A nested grid is employed to resolve fine structure down to 1 AU while following the entire structure of the molecular cloud core of radius 0.14 pc. A total of 225 models are shown to survey the effects of initial rotation speed, rotation law, and amplitude of bar mode perturbation. The simulations show that the cloud fragments whenever the cloud rotates sufficiently slowly to allow collapse but fast enough to form a disk before first-core formation. The latter condition is equivalent to $Ω_0 t_{\rm ff} \gtrsim 0.05$, where $Ω_0$ and $t_{\rm ff}$ denote the initial central angular velocity and the freefall time measured from the central density, respectively. Fragmentation is classified into six types: disk-bar, ring-bar, satellite, bar, ring, and dumbbell types according to the morphology of collapse and fragmentation. When the outward decrease in initial angular velocity is more steep, the cloud deforms from spherical at an early stage. The cloud deforms into a ring only when the bar mode m = 2 perturbation is very minor. The ring fragments into two or three fragments via ring-bar type fragmentation and into at least three fragments via ring type fragmentation. When the bar mode is significant, the cloud fragments into two fragments via either bar or dumbbell type fragmentation. These fragments eventually merge due to their low angular momenta, after which several new fragments form around the merged fragment via satellite type fragmentation.

astro-ph↗