SearcharxivSearch

arXiv subjects

Tomohiro Hakamata

Publications and source records attributed to Tomohiro Hakamata.

9 recordsLinked to original sources

The line modulations of H-like Fe, Ca, Ar, and S observed with $XRISM$/Resolve in Cyg X-3

Cygnus X-3, hosting a Wolf-Rayet (WR) star whose dense wind produces various spectral lines due to photoionization by X-rays from a compact object, provides an ideal laboratory for studying wind dynamics and density structure. We measured the orbital modulations of the Fe, Ca, Ar, and S Ly$α$ lines observed with the X-ray microcalorimeter (Resolve) onboard the $XRISM$, taking account of both emission and absorption lines of the Ly$α$ complexes. The modulations of Doppler shifts of the Fe, Ca, Ar, and S Ly$α$ lines showed amplitudes of 500 km s$^{-1}$ and phase offsets of 0.04, 0.09, 0.11, and 0.17, respectively, in units of an orbital period (4.8 hours) relative to the orbital motion of the compact object. This result indicated that H-like Fe most closely follows the compact object's motion. The line widths ranged from 400 to 1000 km s$^{-1}$. The intensities of both emission and absorption lines reached their minima around orbital phase 0.0 and their maxima around phase 0.5. The absorption peaks, however, did not align exactly with phase 0.5, suggesting the inhomogeneous structures such as an accretion wake and/or a bow shock. We compared the observed modulations with calculations based on a stellar wind model, accelerated by ultraviolet radiation from the WR star. One of the calculations qualitatively reproduced the observed trend that H-like Fe ions were concentrated near the compact object, whereas H-like S was distributed across the binary system, with H-like Ca and Ar showing intermediate spatial distributions. From this comparison, we estimated that a mass-loss rate of the stellar wind was approximately $5 \times 10^{-6}$-$1 \times 10^{-5}\ M_{\odot}\ {\rm yr}^{-1}$.

astro-ph.HE

Refined Constraints on the Hard X-ray Polarization of the Crab Pulsar and Nebula Derived from an Extended XL-Calibur Dataset

We present updated hard X-ray polarization measurements of the Crab pulsar and nebula obtained with the balloon-borne polarimeter XL-Calibur in the ~19-64 keV energy range. During the flight, intermittent GPS-failure resulted in poorly constrained timing for ~38% of the Crab dataset. By implementing a new phase-recovery method that reconstructs timing during extended GPS-off intervals, phase tag data is recovered for ~95% of the GPS-off dataset, increasing the precision of the phase-resolved analysis. Phase-information for the data is recovered by using the Crab pulsar, with its 33 ms period, as an external timing source. Using a Markov-Chain Monte-Carlo framework to jointly fit phase offsets and frequency derivatives, sufficient phase accuracy is achieved, across multiple periods without GPS for a phase-resolved analysis. This enables inclusion of nearly the full dataset in the polarization study. The polarization degree of the nebular emission is found to be (27.7${\pm}$4.9)% at a polarization angle of 127.2°${\pm}$5.1° confirming previous XL-Calibur results and remaining aligned with the Crab's spin axis, consistent with synchrotron emission from the inner nebula. Phase-resolved measurements show that the off-pulse and bridge intervals exhibit a strong polarization, while the pulsar peaks, although weakly constrained, remain in agreement with the softer-energy trends of IXPE. These findings reinforce a scenario in which hard X-ray emission arises primarily in the nebular torus and wind regions. The successful recovery of precise phase tagging from GPS-off data demonstrates the capacity to use the pulsar as an external clock even in the case of sparsely populated data.

astro-ph.HE

XL-Calibur measurements of polarised hard X-ray emission from the Crab

We report measurements of the linear polarisation degree (PD) and angle (PA) for hard X-ray emission from the Crab pulsar and wind nebula. Measurements were made with the XL-Calibur ($\sim$15-80 keV) balloon-borne Compton-scattering polarimeter in July 2024. The polarisation parameters are determined using a Bayesian analysis of Stokes parameters obtained from X-ray scattering angles. Well-constrained ($\sim$8.5$σ$) results are obtained for the polarisation of the $\sim$19-64 keV signal integrated over all pulsar phases: PD=(25.1$\pm$2.9)% and PA=(129.8$\pm$3.2)$^\circ$. In the off-pulse (nebula-dominated) phase range, the PD is constrained at $\sim$4.5$σ$ and is compatible with the phase-integrated result. The PA of the nebular hard X-ray emission aligns with that measured by IXPE in the 2-8 keV band for the toroidal inner region of the pulsar wind nebula, where the hard X-rays predominantly originate. For the main pulsar peak, PD=(32.8$^{+18.2}_{-28.5}$)% and PA=(156.0 $\pm$ 21.7)$^\circ$, while for the second peak (inter-pulse), PD=(0.0$^{+33.6}_{-0.0}$)% and PA=(154.5 $\pm$ 34.5)$^\circ$. A low level of polarisation in the pulsar peaks likely does not favour emission originating from the inner regions of the pulsar magnetosphere. Discriminating between Crab pulsar emission models will require deeper observations, e.g. with a satellite-borne hard X-ray polarimeter.

astro-ph.HE

XL-Calibur Polarimetry of Cyg X-1 Further Constrains the Origin of its Hard-state X-ray Emission

The balloon-borne hard X-ray polarimetry mission XL-Calibur observed the Black Hole X-ray Binary (BHXRB) Cygnus X-1 (Cyg X-1) during its nearly six-day Long Duration Balloon (LDB) flight from Sweden to Canada in July 2024. The XL-Calibur observations allowed us to derive the most precise constraints to date of the Polarization Degree (PD) and Polarization Angle (PA) of the hard X-ray emission from a BHXRB. XL-Calibur observed Cyg X-1 in the hard state and measured a $\sim$19-64 keV PD of ($5.0^{+2.7}_{-3.0}$)% at a PA of $-28^{\circ}\pm 17^{\circ}$, with an 8.7% chance probability of detecting larger PDs than the one observed, given an unpolarized signal. The XL-Calibur results are thus comparable to the 2-8 keV PD and PA found by IXPE, with a similar agreement between the hard X-ray PA and the radio jet direction. We also discuss the implications of our polarization measurements in the context of models describing the origin of the broadband X-ray and $γ$-ray emission, to which XL-Calibur provides independent constraints on any proposed emission modeling.

astro-ph.HE

XRISM spectroscopy on orbital modulation of Fe Ly$α$ lines in Cygnus X-3

To understand physical processes such as mass transfer and binary evolution in X-ray binaries, the orbital parameters of the system are fundamental and crucial information. Cygnus X-3 is a high-mass X-ray binary composed of a compact object of unknown nature and a Wolf-Rayet star, which is of great interest in the context of wind-fed mass accretion and binary evolution. Here we present XRISM/Resolve high-resolution spectroscopy focusing on the Fe Ly$α$ lines in its hypersoft state. We perform an orbital phase-resolved spectral analysis of the lines to study the orbital modulation of the emission and absorption lines. It is found that the emission lines reflect the orbital motion of the compact object whose estimated velocity amplitude is $430^{~~+150}_{~~-140}~~\mathrm{km\,s^{~-1}}$, while the absorption lines show a variation that can be interpreted as originating from the stellar wind. We discuss possible mass ranges for the binary components using the mass function with the estimated value of the velocity amplitude in this work, combined with the relation between the mass loss rate and the orbital period derivative and the empirical mass and mass loss rate relation for Galactic Wolf-Rayet stars. They are constrained to be $(1.3\text{-}5.1)\,M_\odot$ and $(9.3\text{-}12)\,M_\odot$ for the assumed inclination angle of $i = 25$ deg, which becomes more relaxed to $(1.3\text{-}24)\,M_\odot$ and $(9.3\text{-}16)\,M_\odot$ for $i = 35$ deg, respectively. Thus, it remains unclear whether the system harbors a black hole or a neutron star.

astro-ph.HE

NuSTAR detection of a hot stellar superflare with a temperature of 95 MK in hard X-rays

A search of the hard X-ray archive data of NuSTAR found a transient source, NuSTAR J230059+5857.4, during an observation of 1E 2259+586 on 2013 April 25. A multi-wavelength analysis using X-ray, optical, and IR data, mostly taken in its quiescent phase, was conducted to identify the origin of NuSTAR J230059+5857.4 and elucidate the phenomena associated with the flare activity. The results indicated that NuSTAR J230059+5857.4 was a stellar flare that occurred on a single M-dwarf, M-dwarf binary, or pre-main-sequence star. NuSTAR J230059+5857.4 exhibited the higher emission measure and higher temperature, 8.60+2.15/-1.73x10^54 cm^-3 and 8.21+2.71/-1.86 keV, respectively, on average than the nominal values of stellar flares reported in the past. The flare loop size estimated on the basis of the model to balance the plasma and magnetic pressures was larger than the stellar radius by a factor of several. Since based on solar flare loops, this flare loop scale is excessively large, we conjecture that the observed large emission measure is possible to be attributed to the observation of mutually-associated multiple flares simultaneously occurring on the stellar surface, known as sympathetic flares. Thanks to the large effective area of NuSTAR in the hard X-ray band, we can conduct detailed discussion about a temperature variation associated with the flare. Investigation of the temperature variation during the flare revealed that the temperature remained significantly higher than during the quiescent phase even after the count rate dropped to around 5% of the peak. The sustained high temperature over the long duration is consistent with the idea of sympathetic flares. We found that it is essential to use theoretical models to evaluate loops and assess temporal changes in temperature as done in this study to determine whether there are multiple flares or not when analyzing flare observation data.

astro-ph.SR

Multi-image x-ray interferometer module: II. Demonstration of high-resolution x-ray imaging with regular-interval coded apertures

We have been developing an x-ray imaging system, Multi-Image X-ray Interferometer Module (MIXIM), to achieve a high angular resolution with a compact system size. MIXIM is comprised of a mask with equally-spaced apertures and an x-ray detector. The aperture size and mask-detector distance determine the system's angular resolution. Although a smaller aperture gives a better resolution, the degree of improvement is limited by a diffraction effect. MIXIM circumvents this problem by utilizing the Talbot effect. Our experiment with the previous model equipped with a multi-pinhole mask obtained an angular resolution of 0.5" with a mask-detector distance of 92 cm. A major downside of the multi-pinhole mask is, however, that it has a very low opening fraction, which results in a very low effective area. Here, we newly adopt to MIXIM a multiple coded aperture (MCA) mask, an array of coded aperture patterns. Our proof-of-concept experiment demonstrates that the Talbot effect works even for the MCA mask with a high opening fraction of ~50% at 12.4 keV. Consequently, the new MIXIM realizes about 25 times as large an effective area as that of the previous model, while maintaining a high angular resolution of 0.2" and a compact size of ~1.5 m.

astro-ph.IM

Status of Xtend telescope onboard X-Ray Imaging and Spectroscopy Mission (XRISM)

Xtend is one of the two telescopes onboard the X-ray imaging and spectroscopy mission (XRISM), which was launched on September 7th, 2023. Xtend comprises the Soft X-ray Imager (SXI), an X-ray CCD camera, and the X-ray Mirror Assembly (XMA), a thin-foil-nested conically approximated Wolter-I optics. A large field of view of $38^{\prime}\times38^{\prime}$ over the energy range from 0.4 to 13 keV is realized by the combination of the SXI and XMA with a focal length of 5.6 m. The SXI employs four P-channel, back-illuminated type CCDs with a thick depletion layer of 200 $μ$m. The four CCD chips are arranged in a 2$\times$2 grid and cooled down to $-110$ $^{\circ}$C with a single-stage Stirling cooler. Before the launch of XRISM, we conducted a month-long spacecraft thermal vacuum test. The performance verification of the SXI was successfully carried out in a course of multiple thermal cycles of the spacecraft. About a month after the launch of XRISM, the SXI was carefully activated and the soundness of its functionality was checked by a step-by-step process. Commissioning observations followed the initial operation. We here present pre- and post-launch results verifying the Xtend performance. All the in-orbit performances are consistent with those measured on ground and satisfy the mission requirement. Extensive calibration studies are ongoing.

astro-ph.IM

Xtend, the Soft X-ray Imaging Telescope for the X-ray Imaging and Spectroscopy Mission (XRISM)

Xtend is a soft X-ray imaging telescope developed for the X-Ray Imaging and Spectroscopy Mission (XRISM). XRISM is scheduled to be launched in the Japanese fiscal year 2022. Xtend consists of the Soft X-ray Imager (SXI), an X-ray CCD camera, and the X-ray Mirror Assembly (XMA), a thin-foil-nested conically approximated Wolter-I optics. The SXI uses the P-channel, back-illuminated type CCD with an imaging area size of 31 mm on a side. The four CCD chips are arranged in a 2$\times$2 grid and can be cooled down to $-120$ $^{\circ}$C with a single-stage Stirling cooler. The XMA nests thin aluminum foils coated with gold in a confocal way with an outer diameter of 45~cm. A pre-collimator is installed in front of the X-ray mirror for the reduction of the stray light. Combining the SXI and XMA with a focal length of 5.6m, a field of view of $38^{\prime}\times38^{\prime}$ over the energy range from 0.4 to 13 keV is realized. We have completed the fabrication of the flight model of both SXI and XMA. The performance verification has been successfully conducted in a series of sub-system level tests. We also carried out on-ground calibration measurements and the data analysis is ongoing.

astro-ph.IM