SearcharxivSearch

arXiv subjects

Ton Koonen

Publications and source records attributed to Ton Koonen.

14 recordsLinked to original sources

Real-time 10,000 km Straight-line Transmission using a Software-defined GPU-Based Receiver

Real-time 10,000 km transmission over a straight-line link is achieved using a software-defined multi-modulation format receiver implemented on a commercial off-the-shelf general-purpose graphics processing unit (GPU). Minimum phase 1 GBaud 4-ary quadrature amplitude modulation (QAM) signals are transmitted over 10,000 km and successfully received after detection with a Kramers-Kronig (KK) coherent receiver. 8-, 16-, 32-, and 64-QAM are successfully transmitted over 7600, 5600, 3600, and 1600 km, respectively.

eess.SP

Real-time Transmission of Geometrically-shaped Signals using a Software-defined GPU-based Optical Receiver

A software-defined optical receiver is implemented on an off-the-shelf commercial graphics processing unit (GPU). The receiver provides real-time signal processing functionality to process 1 GBaud minimum phase (MP) 4-, 8-, 16-, 32-, 64-, 128-ary quadrature amplitude modulation (QAM) as well as geometrically shaped (GS) 8- and 128-QAM signals using Kramers-Kronig (KK) coherent detection. Experimental validation of this receiver over a 91~km field-deployed optical fiber link between two Tokyo locations is shown with detailed optical signal-to-noise ratio (OSNR) investigations. A net data rate of 5 Gbps using 64-QAM is demonstrated.

eess.SP

Field Trial of a Flexible Real-time Software-defined GPU-based Optical Receiver

We introduce a flexible, software-defined real-time multi-modulation format receiver implemented on an off-the-shelf general-purpose graphics processing unit (GPU). The flexible receiver is able to process 2 GBaud 2-, 4-, 8-, and 16-ary pulse-amplitude modulation (PAM) signals as well as 1 GBaud 4-, 16- and 64-ary quadrature amplitude modulation (QAM) signals, with the latter detected using a Kramers-Kronig (KK) coherent receiver. Experimental performance evaluation is shown for back-to-back. In addition, by using the JGN high speed R&D network testbed, performance is evaluated after transmission over 91 km field-deployed optical fiber and reconfigurable optical add-drop multiplexers (ROADMs).

eess.SP

Threshold-Based Fast Successive-Cancellation Decoding of Polar Codes

Fast SC decoding overcomes the latency caused by the serial nature of the SC decoding by identifying new nodes in the upper levels of the SC decoding tree and implementing their fast parallel decoders. In this work, we first present a novel sequence repetition node corresponding to a particular class of bit sequences. Most existing special node types are special cases of the proposed sequence repetition node. Then, a fast parallel decoder is proposed for this class of node. To further speed up the decoding process of general nodes outside this class, a threshold-based hard-decision-aided scheme is introduced. The threshold value that guarantees a given error-correction performance in the proposed scheme is derived theoretically. Analysis and hardware implementation results on a polar code of length $1024$ with code rates $1/4$, $1/2$, and $3/4$ show that our proposed algorithm reduces the required clock cycles by up to $8\%$, and leads to a $10\%$ improvement in the maximum operating frequency compared to state-of-the-art decoders without tangibly altering the error-correction performance. In addition, using the proposed threshold-based hard-decision-aided scheme, the decoding latency can be further reduced by $57\%$ at $\mathrm{E_b}/\mathrm{N_0} = 5.0$~dB.

cs.IT

Real-time, Software-Defined, GPU-Based Receiver Field Trial

We demonstrate stable real-time operation of a software-defined, GPU-based receiver over a metropolitan network. Massive parallelization is exploited for implementing direct-detection and coherent Kramers-Kronig detection in real time at 2 and 1 GBaud, respectively.

eess.SP

Implementation of a High-Throughput Fast-SSC Polar Decoder with Sequence Repetition Node

Even though polar codes were adopted in the latest 5G cellular standard, they still have the fundamental problem of high decoding latency. Aiming at solving this problem, a fast simplified successive cancellation (Fast-SSC) decoder based on the new class of sequence repetition (SR) nodes has been proposed recently in \cite{sr2020} and has a lower required number of time steps than other existing Fast-SSC decoders in theory. This paper focuses on the hardware implementation of this SR node-based fast-SSC (SRFSC) decoder. The implementation results for a polar code with length 1024 and code rate 1/2 show that our implementation has a throughput of $505$ Mbps on an Altera Stratix IV FPGA, which is 17.9% higher with respect to the previous work.

cs.IT

Complexity-Adjustable SC Decoding of Polar Codes for Energy Consumption Reduction

This paper proposes an enhanced list-aided successive cancellation stack (ELSCS) decoding algorithm with adjustable decoding complexity. In addition, a logarithmic likelihood ratio (LLR)-threshold based path extension scheme is designed to further reduce the memory consumption of stack decoding. Numerical simulation results show that without affecting the error correction performance, the proposed ELSCS decoding algorithm provides a flexible tradeoff between time complexity and computational complexity, while reducing storage space up to $70\%$. Based on the fact that most mobile devices operate in environments with stringent energy budget to support diverse applications, the proposed scheme is a promising candidate for meeting requirements of different applications while maintaining a low computational complexity and computing resource utilization.

cs.IT

Revenue Maximization in an Optical Router Node Using Multiple Wavelengths

In this paper, an optical router node with multiple wavelengths is considered. We introduce revenue for successful transmission and study the ensuing revenue maximization problem. We present an efficient and accurate heuristic procedure for solving the NP-hard revenue maximization problem and investigate the advantage offered by having multiple wavelengths.

cs.NI

Revenue maximization in an optical router node - allocation of service windows

In this paper we study a revenue maximization problem for optical routing nodes. We model the routing node as a single server polling model with the aim to assign visit periods (service windows) to the different stations (ports) such that the mean profit per cycle is maximized. Under reasonable assumptions regarding retrial and dropping probabilities of packets the optimization problem becomes a separable concave resource allocation problem, which can be solved using existing algorithms.

math.OC