arXiv subjects

Tongyao Zhang

Publications and source records attributed to Tongyao Zhang.

6 recordsLinked to original sources

arXiv2026

A substrate booster for P-type 2D ferromagnetic semiconductor

Spin transistors with its both charge and spin properties tuned via electrostatic gating are believed capable for widespread use, which however have proven challenging due to the extreme rareness of their physical base -- magnetic semiconductors. The latter are limited within very few systems including diluted magnetic semiconductors (DMS) and two-dimensional ferromagnetic semiconductors (2D-FMS), and known to suffer from inadequate gate-tunability of their electric and/or magnetic properties. Here, we show a substrate engineering paradigm by interfacing few-layered Cr$_{2}$Ge$_{2}$Te$_{6}$ (FL-CGT) with an antiferromagnetic insulator CrOCl. Owing to the subtle interfacial charge transfer couplings, CGT can be drastically turned from an ambipolar semiconductor into a high performance P-type semiconductor. When cooled below the Curie temperature, the ON-OFF ratio in such substrate-boosted FMS field-effect transistor (FET) reaches 10$^{5}$ with its coercive field $H_{c}$ of magnetic hysteresis loop tunable by a factor of more than 200$\%$, enabling {gate-assisted magnetic switching in the prototype semiconducting spin transistor architecture}. A crossover from critical power-law scaling to a dual power-law behaviour under heavy hole doping was further observed. Our findings {signify} an efficient interfacial charge transfer and electrically modulated magnetic anisotropy energy supported by calculations. This high performance P-type FMS-FET system suggests that active substrate-boosting paradigm might be a powerful path for the investigation of future gate-tunable spintronic devices.

cond-mat.mes-hall↗

arXiv2026

An AI-driven robotic system for two-dimensional hetero-assemblies

Nanomaterials stacked on-demand, such as rotationally assembled two-dimensional (2D) van der Waals (vdW) layered compounds, provides a versatile platform for quantum simulation and the exploration of exotic electronic phases. Currently, however, such nanoassemblies remain largely confined to inefficiency, manually operated process, limiting their potential for probing emergent physical phenomena. There is a pressing need in the field for high-precision, automated assembling techniques, especially for the scalable fabrication of 2D twistronic heterostructures. Here, we present an intelligent automation system dedicated to the fabrication of van der Waals stacks, following the state-of-the-art protocol for dry transfer of exfoliated 2D materials. The system further employs metadata generated from each automated stacking procedure to perform reinforcement learning, thereby continuously bettering its performances. As a concrete demonstration, we fabricate twisted bilayer graphene (TBLG) -- known for its challenging preparation -- and exhibit its unconventional superconductivity near the magic angle. Our work may pave the way for high-throughput fabrication of low-dimensional nanomaterials including twistronic heterostructures, where integrating data mining and artificial intelligence can accelerate the discovery of novel physical phenomena.

cond-mat.mes-hall↗

arXiv2026

Batch-Fabricated PDMS Templates for the Robotic Transfer of 2D Materials

Robotic stacking of van der Waals heterostructures has been at the verge thanks to the convergence between artificial intelligence (AI) and two-dimensional (2D) materials research. Key ingredients to fulfill this pursuit often include algorithms to identify layer compounds on chips, hard-wares to realize sophisticated operations of motion and/or rotation in a microscale, and, as importantly, highly-standardized and uniform transfer stamps that are often used in picking up layered materials under a microscope. Here, we report a hot-casted-droplet batch fabrication method for polydimethylsiloxane (PDMS) templates tailored for dry transfer of 2D materials. Controlled precursor formulation, degassing, and motorized-syringe dispensing produce dome-shaped PDMS templates with ultra-smooth surfaces (root-mean-square roughness about 0.3 nm at relatively low curing temperatures). By tuning the curing temperature, the reproducible and controllable apex curvature allows precisely defined contact area between the organic adhesive film and substrate, via thermal expansion. Our results further reveals thermalmechanical behaviors with different casting parameters of such PDMS domes. This scalable and parameterized fabrication protocol gives rise to uniform transfer-stamps with ultra-smooth surface, which may be beneficial for future AI-driven robotic assembly of 2D material heterostructures.

cond-mat.mtrl-sci↗

arXiv2023

Probing the fractional quantum Hall phases in valley-layer locked bilayer MoS$_{2}$

Semiconducting transition-metal dichalcogenides (TMDs) exhibit high mobility, strong spin-orbit coupling, and large effective masses, which simultaneously leads to a rich wealth of Landau quantizations and inherently strong electronic interactions. However, in spite of their extensively explored Landau levels (LL) structure, probing electron correlations in the fractionally filled LL regime has not been possible due to the difficulty of reaching the quantum limit. Here, we report evidence for fractional quantum Hall (FQH) states at filling fractions 4/5 and 2/5 in the lowest LL of bilayer MoS$_{2}$, manifested in fractionally quantized transverse conductance plateaus accompanied by longitudinal resistance minima. We further show that the observed FQH states sensitively depend on the dielectric and gate screening of the Coulomb interactions. Our findings establish a new FQH experimental platform which are a scarce resource: an intrinsic semiconducting high mobility electron gas, whose electronic interactions in the FQH regime are in principle tunable by Coulomb-screening engineering, and as such, could be the missing link between atomically thin graphene and semiconducting quantum wells.

cond-mat.mes-hall↗

arXiv2021

Realization of graphene logics in an exciton-enhanced insulating phase

For two decades, two-dimensional carbon species, including graphene, have been the core of research in pursuing next-generation logic applications beyond the silicon technology. Yet the opening of a gap in a controllable range of doping, whilst keeping high conductance outside of this gapped state, has remained a grand challenge in them thus far. Here we show that, by bringing Bernal-stacked bilayer graphene in contact with an anti-ferromagnetic insulator CrOCl, a strong insulating behavior is observed in a wide range of positive total electron doping $n_\mathrm{tot}$ and effective displacement field $D_\mathrm{eff}$ at low temperatures. Transport measurements further prove that such an insulating phase can be well described by the picture of an inter-layer excitonic state in bilayer graphene owing to electron-hole interactions. The consequential over 1 $\mathrm{GΩ}$ excitonic insulator can be readily killed by tuning $D_\mathrm{eff}$ and/or $n_\mathrm{tot}$, and the system recovers to a high mobility graphene with a sheet resistance of less than 100 $\mathrmΩ$. It thus yields transistors with "ON-OFF" ratios reaching 10$^{7}$, and a CMOS-like graphene logic inverter is demonstrated. Our findings of the robust insulating phase in bilayer graphene may be a leap forward to fertilize the future carbon computing.

cond-mat.mes-hall↗

arXiv2019

Room temperature 2D ferromagnetism in few-layered 1$T$-CrTe$_{2}$

Spin-related electronics using two dimensional (2D) van der Waals (vdW) materials as a platform are believed to hold great promise for revolutionizing the next generation spintronics. Although many emerging new phenomena have been unravelled in 2D electronic systems with spin long-range orderings, the scarcely reported room temperature magnetic vdW material has thus far hindered the related applications. Here, we show that intrinsic ferromagnetically aligned spin polarization can hold up to 316 K in a metallic phase of 1$T$-CrTe$_{2}$ in the few-layer limit. This room temperature 2D long range spin interaction may be beneficial from an itinerant enhancement. Spin transport measurements indicate an in-plane room temperature negative anisotropic magnetoresistance (AMR) in few-layered CrTe$_{2}$, but a sign change in the AMR at lower temperature, with -0.6$\%$ at 300 K and +5$\%$ at 10 K, respectively. This behavior may originate from the specific spin polarized band structure of CrTe$_{2}$. Our findings provide insights into magnetism in few-layered CrTe$_{2}$, suggesting potential for future room temperature spintronic applications of such 2D vdW magnets.

cond-mat.mes-hall↗