arXiv subjects

Tony X. Zhou

Publications and source records attributed to Tony X. Zhou.

17 recordsLinked to original sources

arXiv2026

Superconducting Flux Memory for Cryogenic Applications

We report the development of flux memory for use with superconducting circuits. This technology stores persistent currents in superconducting loops on-chip to be used to provide flux biasing for superconducting circuits, like qubits. We developed three types of flux memory and draw comparisons among them for circuit design. We demonstrate the utility of flux memory by using an in-situ flux detector and characterize each approach and further demonstrate that once flux is set in a memory cell, benchtop DC control sources can be powered off, leaving the on-chip flux bias in place. We propose that flux memory can be arranged in a two-dimensional configuration to multiplex control signals and reduce how line counts scale (N^2 devices -> 2N control lines), and our experimental results pave the path to the proposed scalability. We demonstrate the use of flux memory to flux bias a transmon qubit and show the tunability of the qubit state to a target frequency which remained stable on-chip for 20 hours.

quant-ph↗

arXiv2026

Transmon Phase Gates Controlled by Superconducting Soliton DAC

We introduce a superconducting digital-to-analog converter (DAC) that filters control noise, provides native multiplexing, performs quantum gates in nanoseconds, and can be controlled by CMOS. This is achieved by transducing a trapezoidal drive pulse into a superconducting soliton, which is then held in the DAC load loop, applying flux to a mutually-coupled superconducting qubit or gate coupler. The analog flux output by the DAC can be easily controlled by varying the soliton hold time, or with a DC-biased tunable DAC-qubit coupler, allowing the DAC to perform a fixed-time, high-fidelity gate that's robust to fabrication variance or flux offsets in the quantum circuit. Our initial demonstration shows that the DAC can successfully perform 5.6 ns S-gates on transmons. We measure the DAC-induced quantum state excitation probability per gate to be 0.05%, and find that the DAC-induced relaxation rate from the qubit 1 state is below the intrinsic T1 rate limit of the transmon. Quantum simulations show qualitative agreement with the measured data, and predict that the DAC excitation rate can be lowered 10 times further by overdamping the Josephson junction (JJ) in the DAC load loop. may be limited by a Interleaved Randomized Benchmarking (IRB) sequences on an observer qubit reveal that, when scaling to many qubits, the DAC's performance may be limited by a non-local, DAC-induced phase error of 1.6% per gate, appearing in ancilla qubits that are not directly coupled to any of the 30 DACs on the chip. We discuss strategies for future layouts of multi-DAC chips that focus on mitigating the source of these non-local, high-frequency electromagnetic interactions (EMI), and how to incorporate a DC-tunable coupler for phase correction.

quant-ph↗

arXiv2026

Tunable Resonator Integrated Magnetometry

The quantum-technology revolution is reshaping computing, sensing, and communication. In magnetometry, recent advances leverage precise control of spin qubits and color centers in solid-state crystals for mesoscopic-scale sensing. Yet at very low temperatures, superconducting sensing technology remains unrivaled because of its non-invasiveness and higher sensitivity. Here we describe a class of superconducting sensors that offers low loss and quantum non-demolition measurement characteristics. We designed and fabricated a superconducting flux-tunable resonator (tRes) in a superconducting chip foundry and matured it to a level that combines the speed of an inductor-capacitor circuit with the flux sensitivity of a superconducting quantum interference device (SQUID) to perform magnetometry at milli-kelvin temperature to investigate targets. We introduce its fundamental functionality readily at MHz magnetic sampling rate, showcase two measurement modalities, and investigate three circuits with gradually increasing complexity to extract target-specific information. The combination of high sensitivity and fast readout characteristics make tRes an attractive and versatile magnetometer.

cond-mat.mes-hall↗

arXiv2025

Photolithography-Compatible Three-Terminal Superconducting Switch for Driving CMOS Loads

Superconducting devices have enabled breakthrough performance in quantum sensing and ultra-low-power computing. Nevertheless, the need for a cryo-electronics platform that can interface superconductor electronics with Complementary Metal-Oxide-Semiconductor (CMOS) devices has become increasingly evident in many cutting-edge applications. In this work, we present a three-terminal micrometer-wide superconducting wire-based cryotron switch (wTron), fabricated using photolithography, that can directly interface with CMOS electronics. The wTron features an output impedance exceeding 1 k$Ω$ and exhibits reduced sensitivity to ambient magnetic noise, similar to its nanoscale predecessor, the nanocryotron. In addition, its micrometer-wide wires support switching currents in the mA range, making wTrons well-suited for driving current-hungry resistive loads and highly capacitive CMOS loads. We demonstrate this capability by using the wTron to drive room-temperature CMOS electronics, including an LED and a MOSFET with a gate capacitance of 500 pF. We then examine the optimal design parameters of wTrons to drive CMOS loads, such as MOSFETs, HEMTs, and electro-optic modulators. Furthermore, to demonstrate the foundry readiness of the wTron, we fabricated wTrons using MIT Lincoln Laboratory's SFQ5ee superconducting process and characterized their switching behavior. Our work shows that wTron will facilitate the interface between superconductor electronics and CMOS, thereby paving the way for the development of foundry-compatible cryo-electronic ecosystems to advance next-generation computing and quantum applications.

physics.app-ph↗

arXiv2025

Determination of Mid-Infrared Refractive Indices of Superconducting Thin Films Using Fourier Transform Infrared Spectroscopy

In this work, we present a technique to determine the mid-infrared refractive indices of thin superconducting films using Fourier transform infrared spectroscopy (FTIR). In particular, we performed FTIR transmission and reflection measurements on 10-nm-thick NbN and 15-nm-thick MoSi films in the wavelength range of 2.5 to 25 $μ$m, corresponding to frequencies of 12-120 THz or photon energies of 50-500 meV. To extract the mid-infrared refractive indices of these thin films, we used the Drude-Lorentz oscillator model to represent their dielectric functions and implemented an optimization algorithm to fit the oscillator parameters by minimizing the error between the measured and simulated FTIR spectra. We performed Monte Carlo simulations in the optimization routine to estimate error ranges in the extracted refractive indices resulting from multiple sources of measurement uncertainty. To evaluate the consistency of the extracted dielectric functions, we compared the refractive indices extrapolated from these dielectric functions in the UV to near-infrared wavelengths with the values separately measured using spectroscopic ellipsometry. We validated the applicability of the extracted mid-infrared refractive indices of NbN and MoSi at temperatures below their critical temperatures by comparing them with the Mattis-Bardeen model. This FTIR-based refractive index measurement approach can be extended to measure the refractive indices of thin films at wavelengths beyond 25 $μ$m, which will be useful for designing highly efficient photon detectors and photonic devices with enhanced optical absorption in the mid- and far-infrared wavelengths.

physics.optics↗

arXiv2024

Current Induced Hidden States in Josephson Junctions

Josephson junctions enable dissipation-less electrical current through metals and insulators below a critical current. Despite being central to quantum technology based on superconducting quantum bits and fundamental research into self-conjugate quasiparticles, the spatial distribution of super current flow at the junction and its predicted evolution with current bias and external magnetic field remain experimentally elusive. Revealing the hidden current flow, featureless in electrical resistance, helps understanding unconventional phenomena such as the nonreciprocal critical current, i.e., Josephson diode effect. Here we introduce a platform to visualize super current flow at the nanoscale. Utilizing a scanning magnetometer based on nitrogen vacancy centers in diamond, we uncover competing ground states electrically switchable within the zero-resistance regime. The competition results from the superconducting phase re-configuration induced by the Josephson current and kinetic inductance of thin-film superconductors. We further identify a new mechanism for the Josephson diode effect involving the Josephson current induced phase. The nanoscale super current flow emerges as a new experimental observable for elucidating unconventional superconductivity, and optimizing quantum computation and energy-efficient devices.

cond-mat.mes-hall↗

arXiv2024

Entanglement Distribution Delay Optimization in Quantum Networks with Distillation

Quantum networks (QNs) distribute entangled states to enable distributed quantum computing and sensing applications. However, in such QNs, quantum switches (QSs) have limited resources that are highly sensitive to noise and losses and must be carefully allocated to minimize entanglement distribution delay. In this paper, a QS resource allocation framework is proposed, which jointly optimizes the average entanglement distribution delay and entanglement distillation operations, to enhance the end-to-end (e2e) fidelity and satisfy minimum rate and fidelity requirements. The proposed framework considers realistic QN noise and includes the derivation of the analytical expressions for the average quantum memory decoherence noise parameter, and the resulting e2e fidelity after distillation. Finally, practical QN deployment aspects are considered, where QSs can control 1) nitrogen-vacancy (NV) center SPS types based on their isotopic decomposition, and 2) nuclear spin regions based on their distance and coupling strength with the electron spin of NV centers. A simulated annealing metaheuristic algorithm is proposed to solve the QS resource allocation optimization problem. Simulation results show that the proposed framework manages to satisfy all users rate and fidelity requirements, unlike existing distillation-agnostic (DA), minimal distillation (MD), and physics-agnostic (PA) frameworks which do not perform distillation, perform minimal distillation, and does not control the physics-based NV center characteristics, respectively. Furthermore, the proposed framework results in around 30% and 50% reductions in the average e2e entanglement distribution delay compared to existing PA and MD frameworks, respectively. Moreover, the proposed framework results in around 5%, 7%, and 11% reductions in the average e2e fidelity compared to existing DA, PA, and MD frameworks, respectively.

quant-ph↗

arXiv2022

Nanoscale Electric Field Imaging with an Ambient Scanning Quantum Sensor Microscope

Nitrogen-vacancy (NV) center in diamond is a promising quantum sensor with remarkably versatile sensing capabilities. While scanning NV magnetometry is well-established, NV electrometry has been so far limited to bulk diamonds. Here we demonstrate imaging external alternating (AC) and direct (DC) electric fields with a single NV at the apex of a diamond scanning tip under ambient conditions. A strong electric field screening effect is observed at low frequencies due to charge noise on the surface. We quantitatively measure its frequency dependence, and overcome this screening by mechanically oscillating the tip for imaging DC fields. Our scanning NV electrometry achieved an AC E-field sensitivity of 26 mV um^(-1) Hz^(-1/2), a DC E-field gradient sensitivity of 2 V um^(-2) Hz^(-1/2), and sub-100 nm resolution limited by the NV-sample distance. Our work represents an important step toward building a scanning-probe-based multimodal quantum sensing platform.

quant-ph↗

arXiv2022

Broadband solenoidal haloscope for terahertz axion detection

We introduce the Broadband Reflector Experiment for Axion Detection (BREAD) conceptual design and science program. This haloscope plans to search for bosonic dark matter across the [10$^{-3}$, 1] eV ([0.24, 240] THz) mass range. BREAD proposes a cylindrical metal barrel to convert dark matter into photons, which a novel parabolic reflector design focuses onto a photosensor. This unique geometry enables enclosure in standard cryostats and high-field solenoids, overcoming limitations of current dish antennas. A pilot 0.7 m$^{2}$ barrel experiment planned at Fermilab is projected to surpass existing dark photon coupling constraints by over a decade with one-day runtime. Axion sensitivity requires $<10^{-20}$ W/$\sqrt{\textrm{Hz}}$ sensor noise equivalent power with a 10 T solenoid and 10 m$^{2}$ barrel. We project BREAD sensitivity for various sensor technologies and discuss future prospects.

physics.ins-det↗

arXiv2021

Imaging phonon-mediated hydrodynamic flow in WTe2

In the presence of interactions, electrons in condensed-matter systems can behave hydrodynamically, exhibiting phenomena associated with classical fluids, such as vortices and Poiseuille flow. In most conductors, electron-electron interactions are minimized by screening effects, hindering the search for hydrodynamic materials; however, recently, a class of semimetals has been reported to exhibit prominent interactions. Here we study the current flow in the layered semimetal tungsten ditelluride by imaging the local magnetic field using a nitrogen-vacancy defect in a diamond. We image the spatial current profile within three-dimensional tungsten ditelluride and find that it exhibits non-uniform current density, indicating hydrodynamic flow. Our temperature-resolve current profile measurements reveal a non-monotonic temperature dependence, with the strongest hydrodynamic effects at approximately 20 K. We also report ab initio calculations showing that electron-electron interactions are not explained by the Coulomb interaction alone, but are predominantly mediated by phonons. This provides a promising avenue in the search for hydrodynamic flow and prominent electron interactions in high-carrier-density materials.

cond-mat.mes-hall↗

arXiv2021

Physical properties of amorphous molybdenum silicide films for single photon detectors

We systematically investigated the physical properties of amorphous Mo$_{\rm x}$Si$_{1-x}$ films deposited by the magnetron co-sputtering technique. The critical temperature $T_C$ of Mo$_{\rm x}$ Si$_{1-x}$ films increases gradually with the stoichiometry x, and the highest $T_C$=7.9 K was found in Mo$_{\rm 0.83}$ Si$_{0.17}$. Beyond $x$=0.83, preformed Cooper pairs and superconducting domains persist in the films, despite the superconducting state with perfect zero-resistivity is absent. The thick films of Mo$_{\rm 0.83}$ Si$_{0.17}$ show surprising degradation in which the onset of zero-resistivity is suppressed below 2 K. The thin Mo$_{\rm 0.83}$ Si$_{0.17}$ films, however, reveal robust superconductivity even with thickness d$\leq$1 nm. We also characterized wide microwires based on the 2 nm thin Mo$_{\rm 0.8}$ Si$_{0.2}$ films with widths 40 and 60 $μ$m, which show single-photon sensitivity at 780 nm and 1550 nm wavelength

cond-mat.supr-con↗

arXiv2020

Imaging viscous flow of the Dirac fluid in graphene

The electron-hole plasma in charge-neutral graphene is predicted to realize a quantum critical system whose transport features a universal hydrodynamic description, even at room temperature. This quantum critical "Dirac fluid" is expected to have a shear viscosity close to a minimum bound, with an inter-particle scattering rate saturating at the Planckian time $\hbar/(k_B T)$. While electrical transport measurements at finite carrier density are consistent with hydrodynamic electron flow in graphene, a "smoking gun" of viscous behavior remains elusive. In this work, we directly image viscous Dirac fluid flow in graphene at room temperature via measurement of the associated stray magnetic field. Nanoscale magnetic imaging is performed using quantum spin magnetometers realized with nitrogen vacancy (NV) centers in diamond. Scanning single-spin and wide-field magnetometry reveals a parabolic Poiseuille profile for electron flow in a graphene channel near the charge neutrality point, establishing the viscous transport of the Dirac fluid. This measurement is in contrast to the conventional uniform flow profile imaged in an Ohmic conductor. Via combined imaging-transport measurements, we obtain viscosity and scattering rates, and observe that these quantities are comparable to the universal values expected at quantum criticality. This finding establishes a nearly-ideal electron fluid in neutral graphene at room temperature. Our results pave the way to study hydrodynamic transport in quantum critical fluids relevant to strongly-correlated electrons in high-$T_c$ superconductors. This work also highlights the capability of quantum spin magnetometers to probe correlated-electronic phenomena at the nanoscale.

cond-mat.mes-hall↗

arXiv2020

A Magnon Scattering Platform

Scattering experiments have revolutionized our understanding of nature. Examples include the discovery of the nucleus, crystallography, and the discovery of the double helix structure of DNA. Scattering techniques differ by the type of the particles used, the interaction these particles have with target materials and the range of wavelengths used. Here, we demonstrate a new 2-dimensional table-top scattering platform for exploring magnetic properties of materials on mesoscopic length scales. Long lived, coherent magnonic excitations are generated in a thin film of YIG and scattered off a magnetic target deposited on its surface. The scattered waves are then recorded using a scanning NV center magnetometer that allows sub-wavelength imaging and operation under conditions ranging from cryogenic to ambient environment. While most scattering platforms measure only the intensity of the scattered waves, our imaging method allows for spatial determination of both amplitude and phase of the scattered waves thereby allowing for a systematic reconstruction of the target scattering potential. Our experimental results are consistent with theoretical predictions for such a geometry and reveal several unusual features of the magnetic response of the target, including suppression near the target edges and gradient in the direction perpendicular to the direction of surface wave propagation. Our results establish magnon scattering experiments as a new platform for studying correlated many-body systems.

cond-mat.mes-hall↗

arXiv2020

Crystallographic Orientation Dependent Reactive Ion Etch in Single Crystal Diamond

Sculpturing desired shapes in single crystal diamond is ever more crucial in the realization of complex devices for nanophotonics, quantum computing, and quantum optics. The crystallographic orientation dependent wet etch of single crystalline silicon in potassium hydroxide (KOH) allows a range of shapes formed and has significant impacts on MEMS (microelectromechanical systems), AFM (atomic force microscopy), and microfluidics. Here, a crystal direction dependent dry etching principle in an inductively-coupled plasma reactive ion etcher is presented, which allows to selectively reveal desired crystal planes in monocrystalline diamond by controlling the etching conditions. The principle is demonstrated when the kinetic energy of incident ions on diamond surfaces is reduced below a certain threshold leading to anisotropic etching and faceting along specific crystal planes. Using the principle, monolithic diamond nanopillars for magnetometry using nitrogen vacancy centers are fabricated. In these nanopillars, a half-tapering angle up to 21° is achieved, the highest angle reported, which leads to a high photon efficiency and high mechanical strength of the nanopillar. These results represent the first demonstration of crystallographic orientation dependent reactive ion etch principle, which opens a new window for shaping specific nanostructures which is at the heart of nanotechnology. It is believed that this principle will prove to be valuable for structuring and patterning of other single crystal materials as well.

physics.app-ph↗

arXiv2017

Scanning Diamond NV Center Probes Compatible with Conventional AFM Technology

Scanning probe microscopy using nitrogen vacancy (NV) centers in diamond has become a versatile tool with applications in physics, chemistry, life sciences and earth and planetary sciences. However, the fabrication of diamond scanning probes with high photon collection efficiency, NV centers with long coherence times and integrated radio frequency (RF) remains challenging due to the small physical dimensions of the probes and the complexity of the fabrication techniques. In this work, we present a simple and robust method to reliably fabricate probes that can be integrated with conventional quartz tuning fork based sensors as well as commercial silicon AFM cantilevers. For the first time, an integrated RF micro-antenna for NV center spin manipulation is directly fabricated onto the probe making the design versatile and compatible with virtually all AFM instruments. This integration marks a complete sensor package for NV center-based magnetometry, and opens up this newly developed scanning probe technique to the broader scientific community.

cond-mat.mes-hall↗

arXiv2017

Imaging the Spin Texture of a Skyrmion Under Ambient Conditions Using an Atomic-Sized Sensor

Magnetic skyrmions are two-dimensional non-collinear spin textures characterised by an integer topological number. They commonly crystallise at low temperatures in bulk noncentrosymmetric ferromagnets where the lack of inversion symmetry leads to an antisymmetric component of the exchange interaction. Recently, stable room-temperature skyrmions were reported in stacks of thin magnetic films where antisymmetric exchange results from broken symmetry at the interface. Determining the spin structure of these technologically-relevant skyrmions in the presence of external magnetic fields has remained a key experimental challenge. Here, we use the single electron spin of a Nitrogen-Vacancy (NV) centre in diamond to perform scanning magnetometry of skyrmions in Pt/Co/Ta multilayers under ambient conditions. We introduce a novel method to assess the manifold of spin textures compatible with the measured local magnetic fields and identify physically allowed configurations based on the topology of the resulting solution. We determine that the underlying magnetization pattern for the skyrmion is consistent with a cycloid (or Néel)-like spin texture, in agreement with theoretical predictions for interfacial antisymmetric exchange interaction. Our results open up wide-ranging possibilities in quantitative model-free imaging of two-dimensional spin structures using scanning NV magnetometry.

cond-mat.str-el↗

arXiv2016

Control and Local Measurement of the Spin Chemical Potential in a Magnetic Insulator

The spin chemical potential characterizes the tendency of spins to diffuse. Probing the spin chemical potential could provide insight into materials such as magnetic insulators and spin liquids and aid optimization of spintronic devices. Here, we introduce single-spin magnetometry as a generic platform for non-perturbative, nanoscale characterization of spin chemical potentials. We use this platform to investigate magnons in a magnetic insulator, surprisingly finding that the magnon chemical potential can be efficiently controlled by driving the system's ferromagnetic resonance. We introduce a symmetry-based two-fluid theory describing the underlying magnon processes, realize the first experimental determination of the local thermomagnonic torque, and illustrate the detection sensitivity using electrically controlled spin injection. Our results open the way for nanoscale control and imaging of spin transport in mesoscopic spin systems.

cond-mat.mes-hall↗