arXiv subjects

Tracee Jamison-Hooks

Publications and source records attributed to Tracee Jamison-Hooks.

5 recordsLinked to original sources

arXiv2026

An Open Source RFSoC-based Readout Electronics System for Arrays of Kinetic Inductance Detectors and Superconducting Resonators

We present a novel readout electronics system for large arrays of superconducting electromagnetic resonators, such as kinetic inductance detectors (KIDs), based on a Radio Frequency System on Chip (RFSoC) architecture. Each channel in the readout system is designed for frequency division multiplexing of up to 1024 high quality factor resonances placed on a single microwave transmission line at unique frequencies within a 512 MHz bandwidth. We describe the design of the digital and analog signal processing chains for the implementation of a two-channel 2048-resonator system on the Xilinx ZCU111 RFSoC evaluation board in combination with a custom intermediate frequency (IF) system to convert the RFSoC band to higher frequencies up to 4 GHz. We also detail an associated software interface that provides a range of tools commonly utilized for characterizing KID resonators and for operating them as part of a photometric millimeter-wave imager. We additionally provide noise characterizations of the individual readout components, along with the complete readout system in isolation and in operation to readout KID resonators.

physics.ins-det↗

arXiv2025

Spaceflight KID Readout Electronics for PRIMA

We present the design and testing of a prototype multiplexing kinetic inductance detector (KID) readout electronics for the PRobe far-Infrared Mission for Astrophysics (PRIMA) space mission. PRIMA is a Probe-class astrophysics mission concept that will answer fundamental questions about the formation of planetary systems, the co-evolution of stars and supermassive black holes in galaxies, and the rise of heavy elements and dust over cosmic time. The readout electronics for PRIMA must be compatible with operation at Earth-Sun L2 and capable of multiplexing more than 1000 detectors over 2.5 GHz bandwidth while consuming around 30 W per readout chain. The electronics must also be capable of switching between the two instruments, which have different readout bands: the hyperspectral imager (PRIMAger, 2.6-4.9 GHz) and the spectrometer (FIRESS, 0.4-2.4 GHz). The PRIMA readout electronics use high-heritage SpaceCube digital electronics with a build-to-print SpaceCube Mini v3.0 board using a radiation-tolerant Kintex KU060 field programmable gate array (FPGA) and a custom high-speed digitizer board, along with RF electronics that provide filtering and power conditioning. We present the driving requirements for the system, as well as the hardware, firmware, software, and system-level design that meets those requirements.

astro-ph.IM↗

arXiv2025

KID Detector Readout Electronics Development for Habitable Worlds Observatory

We present the status and goals of the readout electronics system we are developing to support the detector arrays in the coronagraph instrument on the NASA Habitable Worlds Observatory (HWO) mission currently in development. HWO aims to revolutionize exoplanet exploration by performing direct imaging and spectroscopy of 25 or more habitable exoplanets, and to resolve a broad range of astrophysics science questions as well. Since exoplanet yield depends critically on the detector dark count rate, as we show in this paper, the ambitious goals of HWO require arrays of single-photon energy-resolving detectors. We argue that Kinetic Inductance Detectors (KIDs) are best suited to meet these requirements. To support the detectors required for HWO and future far-IR missions, at the required power consumption and detector count, we are developing a radiation-tolerant reconfigurable readout system for both imaging and energy-resolving single photon KID detector arrays. We leverage an existing RFSoC-based system we built for NASA balloons that has a power consumption of 30 Watts and reads out 2000-4000 detectors (i.e. 7-15 mW/pixel), and move to a radiation tolerant Kintex Ultrascale FPGA chip to bring low-power wide bandwidth readout to a space-qualified platform for the first time. This improves significantly over previous spaceflight systems, and delivers what is required for NASA's future needs: ~100,000 pixels with less than 1 kW total power consumption. Overall, the system we are developing is a significant step forward in capability, and retires many key risks for the Habitable Worlds Observatory mission.

astro-ph.IM↗

arXiv2025

Development of Space Qualified Signal Processing Readout Electronics for HabWorlds and Origins Space Telescope Detector and Arrays

The Habitable Worlds Observatory (HWO) -- a flagship ultraviolet/optical/infrared space telescope recommended by the National Academies' Pathways to Discovery in Astronomy and Astrophysics -- will require detector technologies capable of supporting significantly larger pixel-count arrays than previous missions. Microwave Kinetic Inductance Detectors (MKIDs), naturally suited to microwave multiplexing readout, are already in use across several balloon-borne missions with FPGA based systems. To transition this capability to space, we are developing a radiation-hardened detector readout system that builds directly on the technical and environmental requirements defined by the PRIMA mission. PRIMA serves as a critical pathfinder, informing the radiation tolerance, resource constraints, and on-board processing capabilities needed for HWO. In this work, we present our current results on algorithm implementation, hardware architecture, and firmware development using the radiation-hardened AMD Kintex Ultrascale FPGA, aligning with PRIMA's stringent specifications to ensure compatibility with future space-based observatories like HWO.

astro-ph.IM↗

arXiv2024

Frequency-domain multiplexing of SNSPDs with tunable superconducting resonators

This work culminates in a demonstration of an alternative Frequency Domain Multiplexing (FDM) scheme for Superconducting Nanowire Single-Photon Detectors (SNSPDs) using the Kinetic inductance Parametric UP-converter (KPUP) made out of NbTiN. There are multiple multiplexing architectures for SNSPDs that are already in use, but FDM could prove superior in applications where the operational bias currents are very low, especially for mid- and far-infrared SNSPDs. Previous FDM schemes integrated the SNSPD within the resonator, while in this work we use an external resonator, which gives more flexibility to optimize the SNSPD architecture. The KPUP is a DC-biased superconducting resonator in which a nanowire is used as its inductive element to enable sensitivity to current perturbations. When coupled to an SNSPD, the KPUP can be used to read out current pulses on the few $μ$A scale. The KPUP is made out of NbTiN, which has high non-linear kinetic inductance for increased sensitivity at higher current bias and high operating temperature. Meanwhile, the SNSPD is made from WSi, which is a popular material for broadband SNSPDs. To read out the KPUP and SNSPD array, a software-defined radio platform and a graphics processing unit are used. Frequency Domain Multiplexed SNSPDs have applications in astronomy, remote sensing, exoplanet science, dark matter detection, and quantum sensing.

physics.ins-det↗