arXiv subjects

Trevor P. Almeida

Publications and source records attributed to Trevor P. Almeida.

10 recordsLinked to original sources

arXiv2026

Compositional and Magnetic Characterisation of Oblique Co and Fe Nanowire Structures Fabricated Using Focused Electron Beam Induced Deposition

Focused electron beam induced deposition (FEBID) is an additive manufacturing technique uniquely suited for fabricating nanoscale 3D prototypes for a range of applications, including spintronic devices. However, the variation of growth dynamics associated with electron beam translation and sample interaction volumes results in structures with non-uniform composition when fabricating intricate 3D geometries. Herein, we measure changes in atomic composition and corresponding changes in magnetic induction in 3D ferromagnetic nanostructures with overhanging elements, e.g. bridges or arches. To investigate the effects of electron beam translation, we fabricated 41 Co and Fe nanowire (NW) structures with growth angle relative to the optic axis varying from 0° to 90°. The (scanning) transmission electron microscopy techniques of electron energy loss spectroscopy and off-axis electron holography were performed to map the NW elemental composition and magnetic induction as a function of NW growth angle. Comparison of the results reveals a reduction in metal content with increased oblique growth angle in FEBID NWs. The magnitude of metal content reduction can be tuned by controlling electron beam parameters, and ferromagnetic NWs with approximately equal metal content at growth angles from 0° to 60° were fabricated by using the lowest viable electron beam voltage and the highest viable beam current to reduce the interaction volume and increase the metal content, respectively.

cond-mat.mes-hall↗

arXiv2025

Identifying grain boundary and intragranular pinning centres in Sm2(Co,Fe,Cu,Zr)17 permanent magnets to guide performance optimisation

Permanent magnets draw their properties from a complex interplay of chemical composition and phase, each with their associated intrinsic magnetic properties. Gaining an understanding of these interactions is the key to deciphering the origins of a permanent magnets' magnetic performance and facilitate the engineering of much improved-performing magnets. Here, we use advanced multiscale microscopy and microanalysis on a bulk Sm2(Co,Fe,Cu,Zr)17 pinning-type high-performance magnet with outstanding thermal and chemical stability. Comparison of the microstructure in regions of different composition, we demonstrate that the pinning of magnetic domains, imaged by nanoscale magnetic induction mapping, is controlled by the composition and atomic arrangement of copper. This is confirmed by micromagnetic simulations. Contrary to the belief that grain boundaries are "weak links" in magnetic materials, we demonstrate grain boundaries undergo magnetization reversal at relatively low fields (0.1-0.3 T), but this remains confined to these regions and does not significantly impact the magnet's coercivity. Our results showcase that it is the optimal microstructure within the grain itself that is crucial for achieving the desired magnetic properties.

cond-mat.mtrl-sci↗

arXiv2025

The Role of Dwell Time on Advancing 3D Nano-printing of Complex Iron Nanostructure Geometries using Focused Electron Beam Induced Deposition

The shift from two- to three-dimensional structures is not only a prominent trend in nanomagnetism but also reflects a broader movement across nanotechnology as a whole. Fields such as nanoelectronics, nanophotonics, data storage are poised to benefit from a new generation of greener, more versatile and multifunctional technologies enabled by this transition to 3D structures. While significant challenges remain, recent progress in bottom-up lithography, advanced microscopy, and computational techniques has made the future realization of these advancements increasingly feasible. Focused electron beam-induced deposition, is a cutting-edge direct-write nanofabrication technique used to manipulate matter at the nanoscale, combined with the unique magnetic properties of nanomaterials. It has gained significant attention in recent decades due to its potential applications in magnetic memories, such as racetrack memory. Consequently, substantial efforts have been directed toward developing nanofabrication techniques and characterizing magnetic nanoelements of various metal depositions. In our work, Fe-based nanostructures have been fabricated precisely using iron pentacarbonyl as a precursor. These structures include nanowires, 5-um bridges, rings, tetrapods, spirals and flower-like nanostructures. The deposition parameters, including electron beam dwell time, beam current, and precursor flux, have been further refined, have been further refined, enabling the precise fabrication of complex geometries.

cond-mat.mes-hall↗

arXiv2025

Model-Based Iterative Reconstruction of Three-Dimensional Magnetisation in a Nanowire Structure Using Electron Holographic Vector Field Tomography

Methods for characterisation of 3D magnetic spin structures are necessary to advance the performance of 3D magnetic nanoscale technologies. However, as the component dimensions approach the nanometre range, it becomes more challenging to analyse 3D magnetic configurations with the appropriate spatial resolution. In this paper, we present a method based on Lorentz transmission electron microscopy in which model-based iterative reconstruction (MBIR) is used to reconstruct the most probable magnetisation in an exemplar nanostructure. This method is based on relating electron phase measurements to the magnetic configuration of the nanostructure, and therefore, the method is subject to certain limitations. In this proof-of-concept experiment, MBIR was tested on an L-shaped ferromagnetic cobalt nanowire, fabricated using focused electron beam induced deposition. Off-axis electron holography was used to acquire a tomographic tilt series of electron holograms, which were analysed to measure magnetic electron phase shift over two tilt arcs with up to $ \pm 60$ degree tilt range. Then, a 3D magnetisation vector field consistent with the tomographic phase measurements was reconstructed, revealing multiple magnetic domains within the nanowire. The reconstructed magnetisation is accurate for magnetic domains larger than 50 nm, and higher resolution can be achieved by the continued development of tomographic reconstruction algorithms.

cond-mat.mes-hall↗

arXiv2024

Phase Coexistence and Transitions between Antiferromagnetic and Ferromagnetic States in a Synthetic Antiferromagnet

In synthetic antiferromagnets (SAFs) the combination of antiferromagnetic order and synthesis using conventional sputtering techniques is combined to produce systems that are advantageous for spintronics applications. Here we present the preparation and study of SAF multilayers possessing both perpendicular magnetic anisotropy and the Dzyaloshinskii-Moriya interaction. The multilayers have an antiferromagnetically (AF) aligned ground state but can be forced into a full ferromagnetic (FM) alignment by applying an out-of-plane field $\sim 100$~mT. We study the spin textures in these multilayers in their ground state as well as around the transition point between the AF and FM states, at fields $\sim 40$~mT, by imaging the spin textures using complementary methods: photo-emission electron, magnetic force, and Lorentz transmission electron microscopies. The transformation into a FM state by field proceeds by a nucleation and growth process, where first skyrmionic nuclei form, which broaden into regions containing a FM-aligned labyrinth pattern that eventually occupies the whole film. This process remarkably occurs without any significant change in the net magnetic moment of the multilayer. The mix of AF- and FM-aligned regions on the micron scale in the middle of this transition is reminiscent of a first-order phase transition that exhibits phase coexistence. These results are important for guiding the design of spintronic devices using chiral magnetic textures made from SAFs.

cond-mat.mes-hall↗

arXiv2022

Off-axis electron holography for the direct visualization of perpendicular shape anisotropy in nano-scale 3D magnetic random-access-memory devices

Perpendicular shape anisotropy (PSA) and double magnetic tunnel junctions (DMTJ) offer practical solutions to downscale spin-transfer-torque Magnetic Random-Access Memory (STT-MRAM) beyond 20 nm technology nodes, whilst retaining their thermal stability and reducing critical currents applied. However, as these modern devices become smaller and three-dimensionally (3D) complex, our understanding of their functional magnetic behavior is often indirect, relying on magnetoresistance measurements and micromagnetic modelling. In this paper, we review recent work that was performed on these structures using a range of advanced electron microscopy techniques, focusing on aspects specific to the 3D and nanoscale nature of such elements. We present the methodology for the systematic transfer of individual SST-MRAM nano-pillars from large-scale arrays to image their magnetic configurations directly using off-axis electron holography. We show that improved phase sensitivity through stacking of electron holograms can be used to image subtle variations in DMTJs and the thermal stability of < 20 nm PSA-STT-MRAM nano-pillars during in-situ heating. The experimental practicalities, benefits and limits of using electron holography for analysis of MRAM devices are discussed, unlocking practical pathways for direct imaging of the functional magnetic performance of these systems with high spatial resolution and sensitivity.

cond-mat.mes-hall↗

arXiv2022

Direct observation of the perpendicular shape anisotropy and thermal stability of p-STT-MRAM nano-pillars

Perpendicular shape anisotropy (PSA) offers a practical solution to downscale spin-transfer torque Magnetic Random-Access Memory (STT-MRAM) beyond the sub-20 nm technology node whilst retaining thermal stability of the storage layer magnetization. However, our understanding of the thermomagnetic behavior of PSA-STT-MRAM is often indirect, relying on magnetoresistance measurements and micromagnetic modelling. Here, the magnetism of a FeCoB / NiFe PSA-STT-MRAM nano-pillar is investigated using off-axis electron holography, providing spatially resolved magnetic information as a function of temperature, which has been previously inaccessible. Magnetic induction maps reveal the micromagnetic configuration of the NiFe storage layer (60 nm high, 20 nm diameter), confirming the PSA induced by its 3:1 aspect ratio. In-situ heating demonstrates that the PSA of the FeCoB / NiFe composite storage layer is maintained up to at least 250 degrees centigrade, and direct quantitative measurements reveal the very moderate decrease of magnetic induction with temperature. Hence, this study shows explicitly that PSA provides significant stability in STT-MRAM applications that require reliable performance over a range of operating temperatures.

cond-mat.mtrl-sci↗

arXiv2020

Phase domain boundary motion and memristance in gradient-doped FeRh nanopillars induced by spin injection

The B2-ordered alloy FeRh shows a metamagnetic phase transition, transforming from antiferromagnetic (AF) to ferromagnetic (FM) order at a temperature $T_\mathrm{t} \sim 380 $~K in bulk. As well as temperature, the phase transition can be triggered by many means such as strain, chemical doping, or magnetic or electric fields. Its first-order nature means that phase coexistence is possible. Here we show that a phase boundary in a 300~nm diameter nanopillar, controlled by a doping gradient during film growth, is moved by an electrical current in the direction of electron flow. We attribute this to spin injection from one magnetically ordered phase region into the other driving the phase transition in a region just next to the phase boundary. The associated change in resistance of the nanopillar shows memristive properties, suggesting potential applications as memory cells or artificial synapses in neuromorphic computing schemes.

cond-mat.mtrl-sci↗

arXiv2020

Asymmetric Magnetic Relaxation behavior of Domains and Domain Walls Observed Through the FeRh First-Order Metamagnetic Phase Transition

The phase coexistence present through a first-order phase transition means there will be finite regions between the two phases where the structure of the system will vary from one phase to the other, known as a phase boundary wall. This region is said to play an important but unknown role in the dynamics of the first-order phase transitions. Here, by using both x-ray photon correlation spectroscopy and magnetometry techniques to measure the temporal isothermal development at various points through the thermally activated first-order metamagnetic phase transition present in the near-equiatomic FeRh alloy, we are able to isolate the dynamic behavior of the domain walls in this system. These investigations reveal that relaxation behavior of the domain walls changes when phase coexistence is introduced into the system and that the domain wall dynamics is different to the macroscale behavior. We attribute this to the effect of the exchange coupling between regions of either magnetic phase changing the dynamic properties of domain walls relative to bulk regions of either phase. We also believe this behavior comes from the influence of the phase boundary wall on other magnetic objects in the system.

cond-mat.mes-hall↗

arXiv2019

Direct visualization of the magnetostructural phase transition in nano-scale FeRh thin films using differential phase contrast imaging

To advance the use of thermally-activated magnetic materials in device applications it is necessary to examine their behaviour on the localised scale in operando conditions. Equi-atomic FeRh undergoes a magnetostructural transition from an antiferromagnetic (AF) to a ferromagnetic (FM) phase above room temperature (~ 75 to 105 °C) and hence is considered a very desirable material for the next generation of novel nanomagnetic or spintronic devices. For this to be realised, we must fully understand the intricate details of AF to FM transition and associated FM domain growth on the scale of their operation. Here we combine in-situ heating with a comprehensive suite of advanced transmission electron microscopy techniques to investigate directly the magnetostructural transition in nano-scale FeRh thin films. Differential phase contrast imaging visualizes the stages of FM domain growth in both cross-sectional and planar FeRh thin films as a function of temperature. Small surface FM signals are also detected due to interfacial strain with the MgO substrate and Fe deficiency after HF etching of the substrate, providing a directional bias for FM domain growth. Our work provides high resolution imaging and quantitative measurements throughout the transition, which were previously inaccessible, and offers new fundamental insight into their potential use in magnetic devices.

cond-mat.mtrl-sci↗