arXiv subjects

Triana Czermak

Publications and source records attributed to Triana Czermak.

3 recordsLinked to original sources

arXiv2026

Adamantane plasma polymers: fluorine-free vacuum-processable triboelectric thin films for all-triboelectric nanogenerator configurations

Triboelectric nanogenerators (TENGs) are major drivers in on-site power generation for smart devices, enable self-powered sensors, and introduce novel catalytic processes. Here, we present the advantages of adamantane plasma layers as bivalently triboelectric surfaces capable of exhibiting both tribopositive and tribonegative character through simple modification of the synthesis conditions without the need for additives or functionalization. Fabrication facing or backfacing the plasma yields thin film polymers with different dielectric constants, Young's moduli, and secondary electron emission. The conformality, stability, and processability of the polymers enable direct implementation across solid-solid, solid-liquid, and hybrid piezo-triboelectric configurations. Additional texturization by buckling is shown to provide voltage and current outputs as high as 90 V cm2 and 0.6 uA for a 2.8 um (tribonegative) vs. 400 nm (tribopositive) combination. A maximum power density of 2.1 uW cm-2 is generated from salty droplets in a switch-electrode drop-TENG configuration employing a 500 nm-thick tribopositive adamantane polymer as the triboelectric surface. These layers have demonstrated outstanding durability, enabling more than 10^5 cycles in solid-solid nanogenerators and 10^4 droplet impacts in solid-liquid configurations. The synthetic method is environmentally friendly and industrially scalable, making the adamantane plasma polymer a reliable and competitive solution for thin film triboelectric materials.

cond-mat.mtrl-sci↗

arXiv2025

Low-Temperature Remote Plasma Synthesis of Highly Porous TiO$_2$ as Electron Transport Layers in Perovskite Solar Cells

Halide perovskite solar cells (PSCs) offer high efficiency and low costs, making them key for future photovoltaics. Optimizing charge transport layers is crucial, with porous TiO$_2$ widely used as electron transport layers (ETL) due to its energy alignment, transparency, and abundance. However, its efficiency relies on crystallinity requiring high-temperature processing (>450$^\circ$C), increasing costs and limiting flexible substrates. Low-temperature wet-chemical methods face scalability issues due to material waste and hazardous solvents. In this context, plasma-based technologies are emerging as a more efficient and sustainable alternative to oxide-based ETLs. This study presents the synthesis of TiO$_2$ layers using an advanced plasma method combining remote plasma-assisted vacuum deposition (RPAVD) and soft plasma etching (SPE) at mild temperatures (<200$^\circ$C), allowing control of microstructure and porosity. The resulting nanocolumnar film, decorated with a highly porous aerogel-like layer, enhances optical and electronic properties. These plasma-synthesized TiO$_2$ layers are antireflective and improve the efficiency in porous n-i-p PSCs, matching the performance of high-temperature reference cells. These PSCs achieve a champion PCE of 14.6%, a high value compared to reference devices synthesized at 450°C. Impedance spectroscopy confirms high recombination resistance and stable capacitance, linked to improved perovskite crystallinity. Our results highlight the potential of the RPAVD+SPE approach for producing low-temperature efficient ETLs, providing a feasible, industrially scalable, and eco-friendly alternative for manufacturing flexible, high-performance photovoltaic devices.

cond-mat.mtrl-sci↗

arXiv2023

Conformal TiO$_2$ aerogel-like films by plasma deposition: from omniphobic antireflective coatings to perovskite solar cells photoelectrodes

The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by spin-coating-based wet chemical methods. Besides, special techniques such as supercritical drying are required to replace the pore liquid with air while maintaining the porous network. In this study, we propose a new method for the fabrication of ultra-porous titanium dioxide thin films at room or mild temperatures (T lower or equal to 120 degrees Celsius) by the sequential process involving plasma deposition and etching. These films are conformal to the substrate topography even for high-aspect-ratio substrates and show percolated porosity values above 85 percent that are comparable to advanced aerogels. The films deposited at room temperature are amorphous. However, they become partly crystalline at slightly higher temperatures presenting a distribution of anatase clusters embedded in the sponge-like structure. Surprisingly, the porous structure remains after annealing the films at 450 degrees Celsius in air, which increases the fraction of the embedded anatase nanocrystals. The films are antireflective, omniphobic, and photoactive becoming super-hydrophilic subjected to UV light irradiation The supported percolated nanoporous structure can be used as an electron-conducting electrode in perovskite solar cells. The properties of the cells depend on the aerogel film thickness reaching efficiencies close to those of commercial mesoporous anatase electrodes. This generic solvent-free synthesis is scalable and is applicable to ultra-high porous conformal oxides of different compositions with potential applications in photonics, optoelectronics, energy storage, and controlled wetting.

physics.app-ph↗