Searcharxiv⌕ Search

arXiv subjects

Truell Hyde

Publications and source records attributed to Truell Hyde.

28 records · Page 2Linked to original sources

A Simple Method to Measure the Interaction Potential of Dielectric Grains in a Dusty Plasma

A simple minimally perturbative method is introduced which provides the ability to experimentally measure both the radial confining potential and the interaction potential between two individual dust particles, levitated in the sheath of a radio-frequency (RF) argon discharge. In this technique, a single dust particle is dropped into the plasma sheath to interact with a second individual dust particle already situated at the system's equilibrium point, without introducing any external perturbation. The resulting data is analyzed using a method employing a polynomial fit to the particle displacement(s), X(t), to reduce uncertainty in calculation. Employing this technique, the horizontal confinement is shown to be parabolic over a wide range of pressures and displacements from the equilibrium point. The interaction potential is also measured and shown to be well-described by a screened Coulomb potential and to decrease with increasing pressure. Finally, the charge on the particle and the effective dust screening distance are calculated. It is shown for the first time experimentally that the charge on a particle in the sheath of an RF plasma decreases with increasing pressure, in agreement with theoretical predictions. The screening distance also decreases with increasing pressure as expected. This technique can be used for rapid determination of particle parameters in dusty plasma.

physics.plasm-ph↗

Dipole-Dipole Interactions of Charged Magnetic Grains

The interaction between dust grains is an important process in fields as diverse as planetesimal formation or the plasma processing of silicon wafers into computer chips. This interaction depends in large part on the material properties of the grains, for example whether the grains are conducting, non-conducting, ferrous or non-ferrous. This work considers the effects that electrostatic and magnetic forces, alone or in combination, can have on the coagulation of dust in various environments. A numerical model is used to simulate the coagulation of charged, charged-magnetic and magnetic dust aggregates formed from ferrous material and the results are compared to each other as well as to those from uncharged, non-magnetic material. The interactions between extended dust aggregates are also examined, specifically looking at how the arrangement of charge over the aggregate surface or the inclusion of magnetic material produces dipole-dipole interactions. It will be shown that these dipole-dipole interactions can affect the orientation and structural formation of aggregates as they collide and stick. Analysis of the resulting dust populations will also demonstrate the impact that grain composition and/or charge can have on the structure of the aggregate as characterized by the resulting fractal dimension.

physics.plasm-ph↗

Probing the sheath electric field using thermophoresis in dusty plasma. Part I: Numerical analysis

By combining the results from a self-consistent 2D dusty plasma fluid model and a 3D N-body code, the equilibrium position and crystal structure were determined for dust particles levitated in the sheath in a modified Gaseous Electronics Conference (GEC) reference cell, in which the lower electrode was heated or cooled. The Debye length, charge and electric field were reconstructed on a sub-millimeter scale by applying a previously developed, independent method. However, this method seems to overestimate the charge, and hence underestimate the electric field. Even corrected for this fact, the results show that the dust is levitated on the plasma side of the Bohm point. The ion drag, which is not fully taken into.

physics.plasm-ph↗

Probing the sheat electric field using thermophoresis in dusty plasma. Part II: Experimental measurements

A two-dimensional dust crystal levitated in the sheath of a modified Gaseous Electronics Conference (GEC) reference cell is manipulated by heating or cooling the lower electrode. The dust charge is obtained from top-view pictures of the crystal using a previously developed analytical model. By assuming a simple force balance, and measuring the radial confining force, the vertical electric field profile in the sheath is reconstructed. The dust crystal is shown to levitate on the plasma side of the Bohm point. Finally, it is shown that the ion drag plays an important role in the vertical force balance, even for large dust grains.

physics.plasm-ph↗

Dipole-Dipole Interactions of Charged-Magnetic Grains

The interaction between dust grains is an important process in fields as diverse as planetesimal formation or the plasma processing of silicon wafers into computer chips. This interaction depends in large part on the material properties of the grains, for example whether the grains are conducting, non-conducting, ferrous or non-ferrous. This work considers the effects that electrostatic and magnetic forces, alone or in combination, can have on the coagulation of dust in various environments. A numerical model is used to simulate the coagulation of charged, charged-magnetic and magnetic dust aggregates formed from ferrous material and the results are compared to each other as well as to those from uncharged, non-magnetic material. The interactions between extended dust aggregates are also examined, specifically looking at how the arrangement of charge over the aggregate surface or the inclusion of magnetic material produces dipole-dipole interactions. It will be shown that these dipole-dipole interactions can affect the orientation and structural formation of aggregates as they collide and stick. Analysis of the resulting dust populations will also demonstrate the impact that grain composition and/or charge can have on the structure of the aggregate as characterized by the resulting fractal dimension.

physics.plasm-ph↗

Experimental and computational characterization of a modified GEC cell for dusty plasma experiments

A self-consistent fluid model developed for simulations of micro- gravity dusty plasma experiments has for the first time been used to model asymmetric dusty plasma experiments in a modified GEC reference cell with gravity. The numerical results are directly compared with experimental data and the experimentally determined dependence of global discharge parameters on the applied driving potential and neutral gas pressure is found to be well matched by the model. The local profiles important for dust particle transport are studied and compared with experimentally determined profiles. The radial forces in the midplane are presented for the different discharge settings. The differences between the results obtained in the modified GEC cell and the results first reported for the original GEC reference cell are pointed out.

physics.plasm-ph↗

Structural Phase Transitions and Vertical Mode Spectra in 2D Finite Plasma Crystals

A numerical simulation utilizing a box_tree code is used to investigate the structure and vertical mode spectrum of finite two-dimensional (2D) plasma crystals. The overall structural symmetry of the system is examined for various Debye lengths and a transition from a predominantly hexagonal structure to a structure having concentric rings along the outer edge and hexagonal lattice symmetry in the interior is shown to develop as the Debye length increases. Both the vertical and horizontal oscillation modes for this type of system are investigated where the horizontal mode spectra is shown to agree with published results while the vertical mode spectra obtained is shown to agree with an independent analytical method. The fundamental frequency for the vertical modes decreases as the mode number l decreases and is shown to have a maximum corresponding to that which would exist if the system acted in toto as a solid plane. For low frequency vertical modes, the largest amplitude particle motion is concentrated within a few inner rings with the outer rings remaining almost motionless. Both of these are in direct contrast to the data obtained for the horizontal modes where it is shown that at high frequencies the largest amplitude particle motion is concentrated within the inner rings.

physics.plasm-ph↗

Vertical Dust Particle Chains-Mass and Charge Measurements

Dusty plasmas have generated a large amount of interest since the discovery of ordered structure (crystal) formation in experimentally generated complex plasmas in 1994. Dust particles within the plasma sheath generated in these complex plasmas can form vertical chains due to the streaming ion wakefield. For the simplest of these configurations (a two particle chain), the particle closest to the lower electrode will generally remain in the shadow of the particle farthest from the lower electrode. These results in the two particles feeling differing ion drag forces: the top particle is acted on by the ion drag force directed from the plasma to the lower electrode, while the bottom particle is acted upon by the resulting wakefield produced by the interaction of the upper particle with the ion drag force. This dynamic situation currently provides the best known experimental environment for examining the physics behind the ion drag force and its interaction with the plasma sheath. An experimental method for investigating the interaction between pair-particle chains based on modulating the bias on the lower electrode employing a DC bias modulation technique will be presented.

astro-ph↗

Relationship between the DC Bias and Debye Length in a Complex Plasma

The levitation height of a dust particle layer within a RF discharge plasma sheath is known to be related to the DC bias, the background pressure, and the Debye length. In this paper, a new experimental technique for measurement of the Debye length is introduced. This technique is based on the relationship between an externally applied DC bias and the particle levitation height and shows that under appropriate conditions, the addition of an externally applied DC bias provides a mechanism for evaluation of the Debye length. When compared with existing techniques, this new method appears to be simpler to implement in some cases.

astro-ph↗

Impact Studies Using a One Stage Light Gas Gun

The Center for Astrophysics,Space Physics, and Engineering Research (CASPER) has completed construction and calibration of a Light Gas Gun (LGG), which is used for low velocity impact studies. At geosynchronous orbit, space debris can impact commercial satellites at velocities of 500 m/s [1] reducing their useful lifetime. Additionally, there is an ever-increasing population of abandoned nonoperational satellites and related debris in these orbits [2]. Therefore, it is important to clearly understand the physics behind how such collisions can cause structural damage. This is most easily determined by measuring the damage incurred on representative material exposed to test collisions in the laboratory. Data collected in this manner will not only help illuminate the shock physics involved but can also aid in providing methods for designing advanced shielding for satellites.

physics.gen-ph↗