arXiv subjects

Tuomo Tikkanen

Publications and source records attributed to Tuomo Tikkanen.

7 recordsLinked to original sources

arXiv2024

A NIRCam-dark galaxy detected with the MIRI/F1000W filter in the MIDIS/JADES Hubble Ultra Deep Field

We report the discovery of Cerberus, an extremely red object detected with the MIRI Deep Imaging Survey (MIDIS) observations in the F1000W filter of the Hubble Ultra Deep Field. The object is detected at $S/N\sim6$, with $\mathrm{F1000W}\sim27$ mag, and undetected in the NIRCam data gathered by the JWST Advanced Deep Extragalactic Survey, JADES, fainter than the 30.0-30.5 mag $5σ$ detection limits in individual bands, as well as in the MIDIS F560W ultra-deep data ($\sim$29 mag, $5σ$). Analyzing the spectral energy distribution built with low-$S/N$ ($<5$) measurements in individual optical-to-mid-infrared filters and higher $S/N$ ($\gtrsim5$) in stacked NIRCam data, we discuss the possible nature of this red NIRCam-dark source using a battery of codes. We discard the possibility of Cerberus being a Solar System body based on the $<0.016$" proper motion in the 1-year apart JADES and MIDIS observations. A sub-stellar Galactic nature is deemed unlikely, given that the Cerberus' relatively flat NIRCam-to-NIRCam and very red NIRCam-to-MIRI flux ratios are not consistent with any brown dwarf model. The extragalactic nature of Cerberus offers 3 possibilities: (1) A $z\sim0.4$ galaxy with strong emission from polycyclic aromatic hydrocarbons; the very low inferred stellar mass, $\mathrm{M}_\star=10^{5-6}$ M$_\odot$, makes this possibility highly improbable. (2) A dusty galaxy at $z\sim4$ with an inferred stellar mass $\mathrm{M}_\star\sim10^{8}$ M$_\odot$. (3) A galaxy with observational properties similar to those of the reddest little red dots discovered around $z\sim7$, but Cerberus lying at $z\sim15$, with the rest-frame optical dominated by emission from a dusty torus or a dusty starburst.

astro-ph.GA↗

arXiv2023

Life beyond 30: probing the -20<M_UV<-17 luminosity function at 8<z<13 with the NIRCam parallel field of the MIRI Deep Survey

We present the ultraviolet luminosity function and an estimate of the cosmic star formation rate density at $8 8$ galaxy candidates based on their dropout nature in the F115W and/or F150W filters, a high probability for their photometric redshifts, estimated with three different codes, being at $z>8$, good fits based on $χ^2$ calculations, and predominant solutions compared to $z<8$ alternatives. We find mild evolution in the luminosity function from $z\sim13$ to $z\sim8$, i.e., only a small increase in the average number density of $\sim$0.2 dex, while the faint-end slope and absolute magnitude of the knee remain approximately constant, with values $α=-2.2\pm0.1$ and $M^*=-20.8\pm0.2$ mag. Comparing our results with the predictions of state-of-the-art galaxy evolution models, we find two main results: (1) a slower increase with time in the cosmic star formation rate density compared to a steeper rise predicted by models; (2) nearly a factor of 10 higher star formation activity concentrated in scales around 2 kpc in galaxies with stellar masses $\sim10^8$ M$_\odot$ during the first 350 Myr of the Universe, $z\sim12$, with models matching better the luminosity density observational estimations $\sim$150 Myr later, by $z\sim9$.

astro-ph.GA↗

arXiv2015

The Mid-Infrared Instrument for JWST, II: Design and Build

The Mid-InfraRed Instrument (MIRI) on the James Webb Space Telescope (JWST) provides measurements over the wavelength range 5 to 28.5 microns. MIRI has, within a single 'package', four key scientific functions: photometric imaging, coronagraphy, single-source low-spectral resolving power (R ~ 100) spectroscopy, and medium-resolving power (R ~ 1500 to 3500) integral field spectroscopy. An associated cooler system maintains MIRI at its operating temperature of < 6.7 K. This paper describes the driving principles behind the design of MIRI, the primary design parameters, and their realization in terms of the 'as-built' instrument. It also describes the test program that led to delivery of the tested and calibrated Flight Model to NASA in 2012, and the confirmation after delivery of the key interface requirements.

astro-ph.IM↗

arXiv2009

Comparison of Measurements of Charge Transfer Inefficiencies in a CCD with High-Speed Column Parallel Readout

Charge Coupled Devices (CCDs) have been successfully used in several high energy physics experiments over the past two decades. Their high spatial resolution and thin sensitive layers make them an excellent tool for studying short-lived particles. The Linear Collider Flavour Identification (LCFI) Collaboration has been developing Column-Parallel CCDs for the vertex detector of a future Linear Collider which can be read out many times faster than standard CCDs. The most recent studies are of devices designed to reduce both the CCD's intergate capacitance and the clock voltages necessary to drive it. A comparative study of measured Charge Transfer Inefficiency values between our previous and new results for a range of operating temperatures is presented.

physics.ins-det↗

arXiv2009

The LCFIVertex package: vertexing, flavour tagging and vertex charge reconstruction with an ILC vertex detector

The precision measurements envisaged at the International Linear Collider (ILC) depend on excellent instrumentation and reconstruction software. The correct identification of heavy flavour jets, placing unprecedented requirements on the quality of the vertex detector, will be central for the ILC programme. This paper describes the LCFIVertex software, which provides tools for vertex finding and for identification of the flavour and charge of the leading hadron in heavy flavour jets. These tools are essential for the ongoing optimisation of the vertex detector design for linear colliders such as the ILC. The paper describes the algorithms implemented in the LCFIVertex package, as well as the scope of the code and its performance for a typical vertex detector design.

physics.ins-det↗

arXiv2008

Modeling of Charge Transfer Inefficiency in a CCD with High Speed Column Parallel Readout

Charge Coupled Devices (CCDs) have been successfully used in several high energy physics experiments over the past two decades. Their high spatial resolution and thin sensitive layers make them an excellent tool for studying short-lived particles. The Linear Collider Flavour Identification (LCFI) collaboration is developing Column-Parallel CCDs (CPCCDs) for the vertex detector of a future Linear Collider. The CPCCDs can be read out many times faster than standard CCDs, significantly increasing their operating speed. An Analytic Model has been developed for the determination of the charge transfer inefficiency (CTI) of a CPCCD. The CTI values determined with the Analytic Model agree largely with those from a full TCAD simulation. The Analytic Model allows efficient study of the variation of the CTI on parameters like readout frequency, operating temperature and occupancy.

physics.ins-det↗

arXiv2008

Measurements of Charge Transfer Inefficiency in a CCD with High-Speed Column Parallel Readout

Charge Coupled Devices (CCDs) have been successfully used in several high energy physics experiments over the past two decades. Their high spatial resolution and thin sensitive layers make them an excellent tool for studying short-lived particles. The Linear Collider Flavour Identification (LCFI) collaboration is developing Column-Parallel CCDs (CPCCDs) for the vertex detector of a future Linear Collider. The CPCCDs can be read out many times faster than standard CCDs, significantly increasing their operating speed. A test stand for measuring the charge transfer inefficiency (CTI) of a prototype CPCCD has been set up. Studies of the CTI have been performed at a range of readout frequencies and operating temperatures.

physics.ins-det↗