arXiv subjects

Tutian Tang

Publications and source records attributed to Tutian Tang.

16 recordsLinked to original sources

arXiv2026

Towards Human-Like Manipulation through RL-Augmented Teleoperation and Mixture-of-Dexterous-Experts VLA

While Vision-Language-Action (VLA) models have demonstrated remarkable success in robotic manipulation, their application has largely been confined to low-degree-of-freedom end-effectors performing simple, vision-guided pick-and-place tasks. Extending these models to human-like, bimanual dexterous manipulation-specifically contact-rich in-hand operations-introduces critical challenges in high-fidelity data acquisition, multi-skill learning, and multimodal sensory fusion. In this paper, we propose an integrated framework to address these bottlenecks, built upon two components. First, we introduce IMCopilot (In-hand Manipulation Copilot), a suite of reinforcement learning-trained atomic skills that plays a dual role: it acts as a shared-autonomy assistant to simplify teleoperation data collection, and it serves as a callable low-level execution primitive for the VLA. Second, we present MoDE-VLA (Mixture-of-Dexterous-Experts VLA), an architecture that seamlessly integrates heterogeneous force and tactile modalities into a pretrained VLA backbone. By utilizing a residual injection mechanism, MoDE-VLA enables contact-aware refinement without degrading the model's pretrained knowledge. We validate our approach on four tasks of escalating complexity, demonstrating doubled success rate improvement over the baseline in dexterous contact-rich tasks.

cs.RO↗

arXiv2026

Stereo-Inertial Poser: Towards Metric-Accurate Shape-Aware Motion Capture Using Sparse IMUs and a Single Stereo Camera

Recent advancements in visual-inertial motion capture systems have demonstrated the potential of combining monocular cameras with sparse inertial measurement units (IMUs) as cost-effective solutions, which effectively mitigate occlusion and drift issues inherent in single-modality systems. However, they are still limited by metric inaccuracies in global translations stemming from monocular depth ambiguity, and shape-agnostic local motion estimations that ignore anthropometric variations. We present Stereo-Inertial Poser, a real-time motion capture system that leverages a single stereo camera and six IMUs to estimate metric-accurate and shape-aware 3D human motion. By replacing the monocular RGB with stereo vision, our system resolves depth ambiguity through calibrated baseline geometry, enabling direct 3D keypoint extraction and body shape parameter estimation. IMU data and visual cues are fused for predicting drift-compensated joint positions and root movements, while a novel shape-aware fusion module dynamically harmonizes anthropometry variations with global translations. Our end-to-end pipeline achieves over 200 FPS without optimization-based post-processing, enabling real-time deployment. Quantitative evaluations across various datasets demonstrate state-of-the-art performance. Qualitative results show our method produces drift-free global translation under a long recording time and reduces foot-skating effects.

cs.CV↗

arXiv2025

FSGlove: An Inertial-Based Hand Tracking System with Shape-Aware Calibration

Accurate hand motion capture (MoCap) is vital for applications in robotics, virtual reality, and biomechanics, yet existing systems face limitations in capturing high-degree-of-freedom (DoF) joint kinematics and personalized hand shape. Commercial gloves offer up to 21 DoFs, which are insufficient for complex manipulations while neglecting shape variations that are critical for contact-rich tasks. We present FSGlove, an inertial-based system that simultaneously tracks up to 48 DoFs and reconstructs personalized hand shapes via DiffHCal, a novel calibration method. Each finger joint and the dorsum are equipped with IMUs, enabling high-resolution motion sensing. DiffHCal integrates with the parametric MANO model through differentiable optimization, resolving joint kinematics, shape parameters, and sensor misalignment during a single streamlined calibration. The system achieves state-of-the-art accuracy, with joint angle errors of less than 2.7 degree, and outperforms commercial alternatives in shape reconstruction and contact fidelity. FSGlove's open-source hardware and software design ensures compatibility with current VR and robotics ecosystems, while its ability to capture subtle motions (e.g., fingertip rubbing) bridges the gap between human dexterity and robotic imitation. Evaluated against Nokov optical MoCap, FSGlove advances hand tracking by unifying the kinematic and contact fidelity. Hardware design, software, and more results are available at: https://sites.google.com/view/fsglove.

cs.RO↗

arXiv2025

FBI: Learning Dexterous In-hand Manipulation with Dynamic Visuotactile Shortcut Policy

Dexterous in-hand manipulation is a long-standing challenge in robotics due to complex contact dynamics and partial observability. While humans synergize vision and touch for such tasks, robotic approaches often prioritize one modality, therefore limiting adaptability. This paper introduces Flow Before Imitation (FBI), a visuotactile imitation learning framework that dynamically fuses tactile interactions with visual observations through motion dynamics. Unlike prior static fusion methods, FBI establishes a causal link between tactile signals and object motion via a dynamics-aware latent model. FBI employs a transformer-based interaction module to fuse flow-derived tactile features with visual inputs, training a one-step diffusion policy for real-time execution. Extensive experiments demonstrate that the proposed method outperforms the baseline methods in both simulation and the real world on two customized in-hand manipulation tasks and three standard dexterous manipulation tasks. Code, models, and more results are available in the website https://sites.google.com/view/dex-fbi.

cs.RO↗

arXiv2025

DexTOG: Learning Task-Oriented Dexterous Grasp with Language

This study introduces a novel language-guided diffusion-based learning framework, DexTOG, aimed at advancing the field of task-oriented grasping (TOG) with dexterous hands. Unlike existing methods that mainly focus on 2-finger grippers, this research addresses the complexities of dexterous manipulation, where the system must identify non-unique optimal grasp poses under specific task constraints, cater to multiple valid grasps, and search in a high degree-of-freedom configuration space in grasp planning. The proposed DexTOG includes a diffusion-based grasp pose generation model, DexDiffu, and a data engine to support the DexDiffu. By leveraging DexTOG, we also proposed a new dataset, DexTOG-80K, which was developed using a shadow robot hand to perform various tasks on 80 objects from 5 categories, showcasing the dexterity and multi-tasking capabilities of the robotic hand. This research not only presents a significant leap in dexterous TOG but also provides a comprehensive dataset and simulation validation, setting a new benchmark in robotic manipulation research.

cs.RO↗

arXiv2024

Kalib: Easy Hand-Eye Calibration with Reference Point Tracking

Hand-eye calibration aims to estimate the transformation between a camera and a robot. Traditional methods rely on fiducial markers, which require considerable manual effort and precise setup. Recent advances in deep learning have introduced markerless techniques but come with more prerequisites, such as retraining networks for each robot, and accessing accurate mesh models for data generation. In this paper, we propose Kalib, an automatic and easy-to-setup hand-eye calibration method that leverages the generalizability of visual foundation models to overcome these challenges. It features only two basic prerequisites, the robot's kinematic chain and a predefined reference point on the robot. During calibration, the reference point is tracked in the camera space. Its corresponding 3D coordinates in the robot coordinate can be inferred by forward kinematics. Then, a PnP solver directly estimates the transformation between the camera and the robot without training new networks or accessing mesh models. Evaluations in simulated and real-world benchmarks show that Kalib achieves good accuracy with a lower manual workload compared with recent baseline methods. We also demonstrate its application in multiple real-world settings with various robot arms and grippers. Kalib's user-friendly design and minimal setup requirements make it a possible solution for continuous operation in unstructured environments.

cs.RO↗

arXiv2024

DiPGrasp: Parallel Local Searching for Efficient Differentiable Grasp Planning

Grasp planning is an important task for robotic manipulation. Though it is a richly studied area, a standalone, fast, and differentiable grasp planner that can work with robot grippers of different DOFs has not been reported. In this work, we present DiPGrasp, a grasp planner that satisfies all these goals. DiPGrasp takes a force-closure geometric surface matching grasp quality metric. It adopts a gradient-based optimization scheme on the metric, which also considers parallel sampling and collision handling. This not only drastically accelerates the grasp search process over the object surface but also makes it differentiable. We apply DiPGrasp to three applications, namely grasp dataset construction, mask-conditioned planning, and pose refinement. For dataset generation, as a standalone planner, DiPGrasp has clear advantages over speed and quality compared with several classic planners. For mask-conditioned planning, it can turn a 3D perception model into a 3D grasp detection model instantly. As a pose refiner, it can optimize the coarse grasp prediction from the neural network, as well as the neural network parameters. Finally, we conduct real-world experiments with the Barrett hand and Schunk SVH 5-finger hand. Video and supplementary materials can be viewed on our website: \url{https://dipgrasp.robotflow.ai}.

cs.RO↗

arXiv2024

MS-MANO: Enabling Hand Pose Tracking with Biomechanical Constraints

This work proposes a novel learning framework for visual hand dynamics analysis that takes into account the physiological aspects of hand motion. The existing models, which are simplified joint-actuated systems, often produce unnatural motions. To address this, we integrate a musculoskeletal system with a learnable parametric hand model, MANO, to create a new model, MS-MANO. This model emulates the dynamics of muscles and tendons to drive the skeletal system, imposing physiologically realistic constraints on the resulting torque trajectories. We further propose a simulation-in-the-loop pose refinement framework, BioPR, that refines the initial estimated pose through a multi-layer perceptron (MLP) network. Our evaluation of the accuracy of MS-MANO and the efficacy of the BioPR is conducted in two separate parts. The accuracy of MS-MANO is compared with MyoSuite, while the efficacy of BioPR is benchmarked against two large-scale public datasets and two recent state-of-the-art methods. The results demonstrate that our approach consistently improves the baseline methods both quantitatively and qualitatively.

cs.CV↗

arXiv2023

RFTrans: Leveraging Refractive Flow of Transparent Objects for Surface Normal Estimation and Manipulation

Transparent objects are widely used in our daily lives, making it important to teach robots to interact with them. However, it's not easy because the reflective and refractive effects can make depth cameras fail to give accurate geometry measurements. To solve this problem, this paper introduces RFTrans, an RGB-D-based method for surface normal estimation and manipulation of transparent objects. By leveraging refractive flow as an intermediate representation, the proposed method circumvents the drawbacks of directly predicting the geometry (e.g. surface normal) from images and helps bridge the sim-to-real gap. It integrates the RFNet, which predicts refractive flow, object mask, and boundaries, followed by the F2Net, which estimates surface normal from the refractive flow. To make manipulation possible, a global optimization module will take in the predictions, refine the raw depth, and construct the point cloud with normal. An off-the-shelf analytical grasp planning algorithm is followed to generate the grasp poses. We build a synthetic dataset with physically plausible ray-tracing rendering techniques to train the networks. Results show that the proposed method trained on the synthetic dataset can consistently outperform the baseline method in both synthetic and real-world benchmarks by a large margin. Finally, a real-world robot grasping task witnesses an 83% success rate, proving that refractive flow can help enable direct sim-to-real transfer. The code, data, and supplementary materials are available at https://rftrans.robotflow.ai.

cs.CV↗

arXiv2023

Precise Robotic Needle-Threading with Tactile Perception and Reinforcement Learning

This work presents a novel tactile perception-based method, named T-NT, for performing the needle-threading task, an application of deformable linear object (DLO) manipulation. This task is divided into two main stages: Tail-end Finding and Tail-end Insertion. In the first stage, the agent traces the contour of the thread twice using vision-based tactile sensors mounted on the gripper fingers. The two-run tracing is to locate the tail-end of the thread. In the second stage, it employs a tactile-guided reinforcement learning (RL) model to drive the robot to insert the thread into the target needle eyelet. The RL model is trained in a Unity-based simulated environment. The simulation environment supports tactile rendering which can produce realistic tactile images and thread modeling. During insertion, the position of the poke point and the center of the eyelet are obtained through a pre-trained segmentation model, Grounded-SAM, which predicts the masks for both the needle eye and thread imprints. These positions are then fed into the reinforcement learning model, aiding in a smoother transition to real-world applications. Extensive experiments on real robots are conducted to demonstrate the efficacy of our method. More experiments and videos can be found in the supplementary materials and on the website: https://sites.google.com/view/tac-needlethreading.

cs.RO↗

arXiv2023

GarmentTracking: Category-Level Garment Pose Tracking

Garments are important to humans. A visual system that can estimate and track the complete garment pose can be useful for many downstream tasks and real-world applications. In this work, we present a complete package to address the category-level garment pose tracking task: (1) A recording system VR-Garment, with which users can manipulate virtual garment models in simulation through a VR interface. (2) A large-scale dataset VR-Folding, with complex garment pose configurations in manipulation like flattening and folding. (3) An end-to-end online tracking framework GarmentTracking, which predicts complete garment pose both in canonical space and task space given a point cloud sequence. Extensive experiments demonstrate that the proposed GarmentTracking achieves great performance even when the garment has large non-rigid deformation. It outperforms the baseline approach on both speed and accuracy. We hope our proposed solution can serve as a platform for future research. Codes and datasets are available in https://garment-tracking.robotflow.ai.

cs.CV↗

arXiv2022

Level 2 Autonomous Driving on a Single Device: Diving into the Devils of Openpilot

Equipped with a wide span of sensors, predominant autonomous driving solutions are becoming more modular-oriented for safe system design. Though these sensors have laid a solid foundation, most massive-production solutions up to date still fall into L2 phase. Among these, Comma.ai comes to our sight, claiming one $999 aftermarket device mounted with a single camera and board inside owns the ability to handle L2 scenarios. Together with open-sourced software of the entire system released by Comma.ai, the project is named Openpilot. Is it possible? If so, how is it made possible? With curiosity in mind, we deep-dive into Openpilot and conclude that its key to success is the end-to-end system design instead of a conventional modular framework. The model is briefed as Supercombo, and it can predict the ego vehicle's future trajectory and other road semantics on the fly from monocular input. Unfortunately, the training process and massive amount of data to make all these work are not publicly available. To achieve an intensive investigation, we try to reimplement the training details and test the pipeline on public benchmarks. The refactored network proposed in this work is referred to as OP-Deepdive. For a fair comparison of our version to the original Supercombo, we introduce a dual-model deployment scheme to test the driving performance in the real world. Experimental results on nuScenes, Comma2k19, CARLA, and in-house realistic scenarios verify that a low-cost device can indeed achieve most L2 functionalities and be on par with the original Supercombo model. In this report, we would like to share our latest findings, shed some light on the new perspective of end-to-end autonomous driving from an industrial product-level side, and potentially inspire the community to continue improving the performance. Our code, benchmarks are at https://github.com/OpenPerceptionX/Openpilot-Deepdive.

cs.CV↗

arXiv2022

RFUniverse: A Multiphysics Simulation Platform for Embodied AI

Multiphysics phenomena, the coupling effects involving different aspects of physics laws, are pervasive in the real world and can often be encountered when performing everyday household tasks. Intelligent agents which seek to assist or replace human laborers will need to learn to cope with such phenomena in household task settings. To equip the agents with such kind of abilities, the research community needs a simulation environment, which will have the capability to serve as the testbed for the training process of these intelligent agents, to have the ability to support multiphysics coupling effects. Though many mature simulation software for multiphysics simulation have been adopted in industrial production, such techniques have not been applied to robot learning or embodied AI research. To bridge the gap, we propose a novel simulation environment named RFUniverse. This simulator can not only compute rigid and multi-body dynamics, but also multiphysics coupling effects commonly observed in daily life, such as air-solid interaction, fluid-solid interaction, and heat transfer. Because of the unique multiphysics capacities of this simulator, we can benchmark tasks that involve complex dynamics due to multiphysics coupling effects in a simulation environment before deploying to the real world. RFUniverse provides multiple interfaces to let the users interact with the virtual world in various ways, which is helpful and essential for learning, planning, and control. We benchmark three tasks with reinforcement learning, including food cutting, water pushing, and towel catching. We also evaluate butter pushing with a classic planning-control paradigm. This simulator offers an enhancement of physics simulation in terms of the computation of multiphysics coupling effects.

cs.RO↗

arXiv2021

ContourRender: Detecting Arbitrary Contour Shape For Instance Segmentation In One Pass

Direct contour regression for instance segmentation is a challenging task. Previous works usually achieve it by learning to progressively refine the contour prediction or adopting a shape representation with limited expressiveness. In this work, we argue that the difficulty in regressing the contour points in one pass is mainly due to the ambiguity when discretizing a smooth contour into a polygon. To address the ambiguity, we propose a novel differentiable rendering-based approach named \textbf{ContourRender}. During training, it first predicts a contour generated by an invertible shape signature, and then optimizes the contour with the more stable silhouette by converting it to a contour mesh and rendering the mesh to a 2D map. This method significantly improves the quality of contour without iterations or cascaded refinements. Moreover, as optimization is not needed during inference, the inference speed will not be influenced. Experiments show the proposed ContourRender outperforms all the contour-based instance segmentation approaches on COCO, while stays competitive with the iteration-based state-of-the-art on Cityscapes. In addition, we specifically select a subset from COCO val2017 named COCO ContourHard-val to further demonstrate the contour quality improvements. Codes, models, and dataset split will be released.

cs.CV↗

arXiv2021

H2O: A Benchmark for Visual Human-human Object Handover Analysis

Object handover is a common human collaboration behavior that attracts attention from researchers in Robotics and Cognitive Science. Though visual perception plays an important role in the object handover task, the whole handover process has been specifically explored. In this work, we propose a novel rich-annotated dataset, H2O, for visual analysis of human-human object handovers. The H2O, which contains 18K video clips involving 15 people who hand over 30 objects to each other, is a multi-purpose benchmark. It can support several vision-based tasks, from which, we specifically provide a baseline method, RGPNet, for a less-explored task named Receiver Grasp Prediction. Extensive experiments show that the RGPNet can produce plausible grasps based on the giver's hand-object states in the pre-handover phase. Besides, we also report the hand and object pose errors with existing baselines and show that the dataset can serve as the video demonstrations for robot imitation learning on the handover task. Dataset, model and code will be made public.

cs.CV↗

arXiv2020

Learning Universal Shape Dictionary for Realtime Instance Segmentation

We present a novel explicit shape representation for instance segmentation. Based on how to model the object shape, current instance segmentation systems can be divided into two categories, implicit and explicit models. The implicit methods, which represent the object mask/contour by intractable network parameters, and produce it through pixel-wise classification, are predominant. However, the explicit methods, which parameterize the shape with simple and explainable models, are less explored. Since the operations to generate the final shape are light-weighted, the explicit methods have a clear speed advantage over implicit methods, which is crucial for real-world applications. The proposed USD-Seg adopts a linear model, sparse coding with dictionary, for object shapes. First, it learns a dictionary from a large collection of shape datasets, making any shape being able to be decomposed into a linear combination through the dictionary. Hence the name "Universal Shape Dictionary". Then it adds a simple shape vector regression head to ordinary object detector, giving the detector segmentation ability with minimal overhead. For quantitative evaluation, we use both average precision (AP) and the proposed Efficiency of AP (AP$_E$) metric, which intends to also measure the computational consumption of the framework to cater to the requirements of real-world applications. We report experimental results on the challenging COCO dataset, in which our single model on a single Titan Xp GPU achieves 35.8 AP and 27.8 AP$_E$ at 65 fps with YOLOv4 as base detector, 34.1 AP and 28.6 AP$_E$ at 12 fps with FCOS as base detector.

cs.CV↗