arXiv subjects

Tzu-Chiao Chien

Publications and source records attributed to Tzu-Chiao Chien.

7 recordsLinked to original sources

arXiv2026

20 Second Parity Lifetime in an InAs--Pb Tetron Device

A central promise of topological quantum computing is that increasing the excitation gap improves device performance significantly. Here, we experimentally validate this principle in an InAs--Pb tetron device via interferometric single-shot parity measurements. By replacing aluminum with the higher-gap superconductor lead in our superconductor-semiconductor hybrid devices, we have improved the robustness of our topological phase. In addition, to enable fast and precise bring-up at scale, we have developed an rf measurement technique that resolves low-energy wire-end states and directly measures their energy splitting with $μ\text{eV}$ precision. We employ this technique to bring up a device in a multi-tetron array and perform parity measurements of one of the tetron's hybrid nanowires (NWs). By controllably switching the wire parity, we observe $h/2e$-periodic bimodal shifts in the quantum capacitance of a quantum dot coupled to the hybrid nanowire in an interference loop. Further time-resolved measurements reveal a characteristic parity switching time of $\sim 20$ s with some instances reaching minute-scale. Such extremely long parity lifetimes are orders of magnitude longer than typical qubit operation times, which are on the order of $μ\text{s}$. Finally, we discuss potential implications for the fidelity of Pauli measurements.

cond-mat.mes-hall↗

arXiv2025

Distinct Lifetimes for $X$ and $Z$ Loop Measurements in a Majorana Tetron Device

We present a hardware realization and measurements of a tetron qubit device in a superconductor-semiconductor heterostructure. The device architecture contains two parallel superconducting nanowires, which support four Majorana zero modes (MZMs) when tuned into the topological phase, and a trivial superconducting backbone. Two distinct readout interferometers are formed by connecting the superconducting structure to a series of quantum dots. We perform single-shot interferometric measurements of the fermion parity for the two loops, designed to implement Pauli-$X$ and $Z$ measurements of the tetron. Performing repeated single-shot measurements yields two widely separated time scales $τ_X = 14.5\pm 0.3 \, \mathrm{μs}$ and $τ_Z = 12.4\pm 0.4\, \mathrm{ms}$ for parity switches observed in the $X$ and $Z$ measurement loops, which we attribute to intra-wire parity switches and external quasiparticle poisoning, respectively. We estimate assignment errors of $\mathrm{err}^X_a=16\%$ and $\mathrm{err}^Z_a=0.5\%$ for $X$ and $Z$ measurement-based operations, respectively.

cond-mat.mes-hall↗

arXiv2025

Bias-preserving and error-detectable entangling operations in a superconducting dual-rail system

For useful quantum computation, error-corrected machines are required that can dramatically reduce the inevitable errors experienced by physical qubits. While significant progress has been made in approaching and exceeding the surface-code threshold in superconducting platforms, large gains in the logical error rate with increasing system size remain out of reach. This is due both to the large number of required physical qubits and the need to operate far below threshold. Importantly, by exploiting the biases and structure of the physical errors, this threshold can be raised. Erasure qubits achieve this by detecting certain errors at the hardware level. Dual-rail qubits encoded in superconducting cavities are a promising erasure qubit wherein the dominant error, photon loss, can be detected and converted to an erasure. In these approaches, the complete set of operations, including two qubit gates, must be high performance and preserve as much of the desirable hierarchy or bias in the errors as possible. Here, we design and realize a novel two-qubit gate for dual-rail erasure qubits based on superconducting microwave cavities. The gate is high-speed ($\sim$500 ns duration), and yields a residual gate infidelity after error detection below 0.1%. Moreover, we experimentally demonstrate that this gate largely preserves the favorable error structure of idling dual-rail qubits, making it ideal for error correction. We measure low erasure rates of $\sim$0.5% per gate, as well as low and asymmetric dephasing errors that occur at least three times more frequently on control qubits compared to target qubits. Bit-flip errors are practically nonexistent, bounded at the few parts per million level. This error asymmetry has not been well explored but is extremely useful in quantum error correction and flag-qubit contexts, where it can create a faster path to effective error-corrected systems.

quant-ph↗

arXiv2023

Demonstrating a superconducting dual-rail cavity qubit with erasure-detected logical measurements

A critical challenge in developing scalable error-corrected quantum systems is the accumulation of errors while performing operations and measurements. One promising approach is to design a system where errors can be detected and converted into erasures. Such a system utilizing erasure qubits are known to have relaxed requirements for quantum error correction. A recent proposal aims to do this using a dual-rail encoding with superconducting cavities. However, experimental characterization and demonstration of a dual-rail cavity qubit has not yet been realized. In this work, we implement such a dual-rail cavity qubit; we demonstrate a projective logical measurement with integrated erasure detection and use it to measure dual-rail qubit idling errors. We measure logical state preparation and measurement errors at the $0.01\%$-level and detect over $99\%$ of cavity decay events as erasures. We use the precision of this new measurement protocol to distinguish different types of errors in this system, finding that while decay errors occur with probability $\sim 0.2\%$ per microsecond, phase errors occur 6 times less frequently and bit flips occur at least 140 times less frequently. These findings represent the first confirmation of the expected error hierarchy necessary to concatenate dual-rail erasure qubits into a highly efficient erasure code.

quant-ph↗

arXiv2023

Realizing all-to-all couplings among detachable quantum modules using a microwave quantum state router

One of the primary challenges in realizing large-scale quantum processors is the realization of qubit couplings that balance interaction strength, connectivity, and mode confinement. Moreover, it is very desirable for the device elements to be detachable, allowing components to be built, tested, and replaced independently. In this work, we present a microwave quantum state router, centered on parametrically driven, Josephson-junction based three-wave mixing, that realizes all-to-all couplings among four detachable quantum modules. We demonstrate coherent exchange among all four communication modes, with an average full-iSWAP time of 764ns and average inferred inter-module exchange fidelity of 0.969, limited by mode coherence. We also demonstrate photon transfer and pairwise entanglement between module qubits, and parallel operation of simultaneous iSWAP exchange across the router. Our router-module architecture serves as a prototype of modular quantum computer that has great potential for enabling flexible, demountable, large-scale quantum networks of superconducting qubits and cavities.

quant-ph↗

arXiv2021

Nearly quantum-limited Josephson-junction Frequency Comb synthesizer

While coherently-driven Kerr microcavities have rapidly matured as a platform for frequency comb formation, such microresonators generally possess weak Kerr coefficients; consequently, triggering comb generation requires millions of photons to be circulating inside the cavity. This suppresses the role of quantum fluctuations in the comb's dynamics. In this paper, we realize a minimal version of coherently-driven Kerr-mediated microwave frequency combs in the circuit QED architecture, where the quantum vacuum's fluctuations are the primary limitation on comb coherence. We achieve a comb phase coherence of up to 35~$μ$s, approaching the theoretical device quantum limit of 55~$μ$s, and vastly longer than the modes' inherent lifetimes of 13~ns. The ability within cQED to engineer stronger nonlinearities than optical microresonators, together with operation at cryogenic temperatures, and excellent agreement of comb dynamics with quantum theory indicates a promising platform for the study of complex dynamics of quantum nonlinear systems

quant-ph↗

arXiv2020

Optimizing Josephson-Ring-Modulator-based Josephson Parametric Amplifiers via full Hamiltonian control

Josephson Parametric Amplifiers (JPA) are nonlinear devices that are used for quantum sensing and qubit readout in the microwave regime. While JPAs regularly operate in the quantum limit, their gain saturates for very small (few photons) input power. In a previous work, we showed that the saturation power of JPAs is not limited by pump depletion, but instead by the high-order nonlinearity of Josephson junctions, the nonlinear circuit elements that enable amplification in JPAs. Here, we present a systematic study of the nonlinearities in JPAs, we show which nonlinearities limit the saturation power, and present a strategy for optimizing the circuit parameters for achieving the best possible JPA. For concreteness, we focus on JPAs that are constructed around a Josephson Ring Modulator (JRM). We show that by tuning the external and shunt inductors, we should be able to take the best experimentally available JPAs and improve their saturation power by $\sim 15$ dB. Finally, we argue that our methods and qualitative results are applicable to a broad range of cavity based JPAs.

quant-ph↗