Searcharxiv⌕ Search

arXiv subjects

U. V. Waghmare

Publications and source records attributed to U. V. Waghmare.

30 records · Page 2Linked to original sources

Thermodynamics of hydrogen vacancies in MgH2 from first-principles calculations and grand-canonical statistical mechanics

Ab initio calculations and statistical mechanics are combined to elucidate the thermodynamics of H vacancies in MgH2. A general method based on a grand-canonical ensemble of defect configurations is introduced to model the exchange of hydrogen between crystalline MgH2 and gas-phase H2. We find that, at temperatures and hydrogen partial pressures of practical interest, MgH2 is capable of accommodating only very small concentrations of hydrogen vacancies, which consist mainly of isolated defects rather than vacancy clusters, contrary to what is expected from a simple energetic analysis.

cond-mat.mtrl-sci↗

Synthesis, Structure and Properties of Boron and Nitrogen Doped Graphene

Two-dimensional graphene exhibits many fascinating properties such as ballistic electronic conduction and quantum Hall effect at room temperature.1-4 Graphene doped electrochemically or through charge-transfer with electron-donor and -acceptor molecules,5-7 shows marked changes in electronic structure, with characteristic signatures in the Raman spectra.5-10 Substitutional doping, universally used in tuning properties of semiconductors, could be a powerful tool to control the electronic properties of graphene. Here, we present the structure and properties of boron and nitrogen doped graphenes, obtained by more than one method involving arc discharge in appropriate gaseous atmosphere, by using modified graphite electrode or by the transformation of nano-diamond. Using a combination of experiment and firstprinciples theory, we demonstrate systematic changes in the carrier-concentration and electronic structure of graphenes with B/N-doping, accompanied by stiffening of the Gband and intensification of the defect related D-band in the Raman spectra. Such n/p - type graphenes obtained without external fields or chemical agents should find device applications.

cond-mat.mtrl-sci↗

Electrochemically Top Gated Graphene: Monitoring Dopants by Raman Scattering

We demonstrate electrochemical top gating of graphene by using a solid polymer electrolyte. This allows to reach much higher electron and hole doping than standard back gating. In-situ Raman measurements monitor the doping. The G peak stiffens and sharpens for both electron and hole doping, while the 2D peak shows a different response to holes and electrons. Its position increases for hole doping, while it softens for high electron doping. The variation of G peak position is a signature of the non-adiabatic Kohn anomaly at $Γ$. On the other hand, for visible excitation, the variation of the 2D peak position is ruled by charge transfer. The intensity ratio of G and 2D peaks shows a strong dependence on doping, making it a sensitive parameter to monitor charges.

cond-mat.mtrl-sci↗

Frequency shift of optical phonons in doped graphene layers

We use first-principles density-functional calculations to determine the frequency shift of the A$'_1$-${\bf K}$ phonon (Raman D band) in monolayer graphene, as a function of the charge doping. A detailed DFT study on the electron-phonon coupling and the phonon line width of E$_{2g}$-${\bm Γ}$ and A$'_1$-${\bf K}$ phonons are also performed for graphene multi-layers. Furthermore, we explain the experimentally observed '1/(Number of Layers)' behaviour of the Raman G band position after including the dynamic response treated within time dependent perturbation theory.

cond-mat.mtrl-sci↗

First-principles study of spontaneous polarization in multiferroic BiFeO$_3$

The ground-state structural and electronic properties of ferroelectric BiFeO$_3$ are calculated using density functional theory within the local spin-density approximation and the LSDA+U method. The crystal structure is computed to be rhombohedral with space group $R3c$, and the electronic structure is found to be insulating and antiferromagnetic, both in excellent agreement with available experiments. A large ferroelectric polarization of 90-100 $μ$C/cm$^2$ is predicted, consistent with the large atomic displacements in the ferroelectric phase and with recent experimental reports, but differing by an order of magnitude from early experiments. One possible explanation is that the latter may have suffered from large leakage currents. However both past and contemporary measurements are shown to be consistent with the modern theory of polarization, suggesting that the range of reported polarizations may instead correspond to distinct switching paths in structural space. Modern measurements on well-characterized bulk samples are required to confirm this interpretation.

cond-mat.mtrl-sci↗

Diffusive phase transitions in ferroelectrics and antiferroelectrics

In this paper, we present a microscopic model for heterogeneous ferroelectric and an order parameter for relaxor phase. We write a Landau theory based on this model and its application to ferroelectric PbFe$_{1/2}$Ta$_{1/2}$O$_3$ (PFT) and antiferroelectric NaNbO$_3$:Gd. We later discuss the coupling between soft mode and domain walls, soft mode and quasi-local vibration and resulting susceptibility function.

cond-mat.mtrl-sci↗

HARES: an efficient method for first-principles electronic structure calculations of complex systems

We discuss our new implementation of the Real-space Electronic Structure method for studying the atomic and electronic structure of infinite periodic as well as finite systems, based on density functional theory. This improved version which we call HARES (for High-performance-fortran Adaptive grid Real-space Electronic Structure) aims at making the method widely applicable and efficient, using high performance Fortran on parallel architectures. The scaling of various parts of a HARES calculation is analyzed and compared to that of plane-wave based methods. The new developments that lead to enhanced performance, and their parallel implementation, are presented in detail. We illustrate the application of HARES to the study of elemental crystalline solids, molecules and complex crystalline materials, such as blue bronze and zeolites.

cond-mat.mtrl-sci↗

Lattice dynamics of BaTiO3, PbTiO3 and PbZrO3: a comparative first-principles study

The full phonon dispersion relations of lead titanate and lead zirconate in the cubic perovskite structure are computed using first-principles variational density-functional perturbation theory, with ab initio pseudopotentials and a plane-wave basis set. Comparison with the results previously obtained for barium titanate shows that the change of a single constituent (Ba to Pb, Ti to Zr) has profound effects on the character and dispersion of unstable modes, with significant implications for the nature of the phase transitions and the dielectric and piezoelectric responses of the compounds. Examination of the interatomic force constants in real space, obtained by a transformation which correctly treats the long-range dipolar contribution, shows that most are strikingly similar, while it is the differences in a few key interactions which produce the observed changes in the phonon dispersions. These trends suggest the possibility of the transferability of force constants to predict the lattice dynamics of perovskite solid solutions.

cond-mat.mtrl-sci↗

Dynamic Local Distortions in Ferroelectrics

Molecular-dynamics simulations of KNbO$_3$ reveal preformed dynamic chain-like structures, present even in the paraelectric phase, that are related to the softening of phonon branches over large regions of the Brillouin zone. The phase sequence of ferroelectric transitions is correctly reproduced, showing that the first-principles effective Hamiltonian used in the simulations captures the essential behavior of the microscopic fluctuations driving the transitions. Real space chains provide a framework for understanding both the displacive and order-disorder characteristics of these phase transitions.

cond-mat.mtrl-sci↗

Ab initio statistical mechanics of the ferroelectric phase transition in PbTiO3

An effective Hamiltonian for the ferroelectric transition in PbTiO3 is constructed from first-principles density-functional-theory total-energy and linear-response calculations through the use of a localized, symmetrized basis set of ``lattice Wannier functions.'' Explicit parametrization of the polar lattice Wannier functions is used for subspace projection, addressing the issues of LO-TO splitting and coupling to the complementary subspace. In contrast with ferroelectric BaTiO3 and KNbO3, we find significant involvement of the Pb atom in the lattice instability. Monte Carlo simulations for this Hamiltonian show a first-order cubic-tetragonal transition at 660 K. Resulting temperature dependence of spontaneous polarization, c/a ratio and unit-cell volume near the transition are in good agreement with experiment. Comparison of Monte Carlo results with mean field theory analysis shows that both strain and fluctuations are necessary to produce the first order character of this transition.

mtrl-th↗

Localized Basis for Effective Lattice Hamiltonians: Lattice Wannier Functions

A systematic method is presented for constructing effective Hamiltonians for general phonon-related structural transitions. The key feature is the application of group theoretical methods to identify the subspace in which the effective Hamiltonian acts and construct for it localized basis vectors, which are the analogue of electronic Wannier functions. The results of the symmetry analysis for the perovskite, rocksalt, fluorite and A15 structures and the forms of effective Hamiltonians for the ferroelectric transition in $PbTiO_3$ and $BaTiO_3$, the oxygen-octahedron rotation transition in $SrTiO_3$, the Jahn-Teller instability in $La_{1-x}(Ca,Sr,Ba)_xMnO_3$ and the antiferroelectric transition in $PbZrO_3$ are discussed. For the oxygen- octahedron rotation transition in $SrTiO_3$, this method provides an alternative to the rotational variable approach which is well behaved throughout the Brillouin zone. The parameters appearing in the Wannier basis vectors and in the effective Hamiltonian, given by the corresponding invariant energy expansion, can be obtained for individual materials using first- principles density-functional-theory total energy and linear response techniques, or any technique that can reliably calculate force constants and distortion energies. A practical approach to the determination of these parameters is presented and the application to ferroelectric $PbTiO_3$ discussed.

mtrl-th↗

Ferroelectric Phase Transitions from First Principles

An effective Hamiltonian for the ferroelectric transition in $PbTiO_3$ is constructed from first-principles density-functional-theory total-energy and linear-response calculations through the use of a localized, symmetrized basis set of ``lattice Wannier functions.'' Preliminary results of Monte Carlo simulations for this system show a first-order cubic-tetragonal transition at 660 K. The involvement of the Pb atom in the lattice instability and the coupling of local distortions to strain are found to be particularly important in producing the behavior characteristic of the $PbTiO_3$ transition. A tentative explanation for the presence of local distortions experimentally observed above $T_c$ is suggested. Further applications of this method to a variety of systems and structures are proposed for first-principles study of finite-temperature structural properties in individual materials.

mtrl-th↗