arXiv subjects

Uffe G. Jørgensen

Publications and source records attributed to Uffe G. Jørgensen.

18 recordsLinked to original sources

arXiv2025

Shape and spin state model of contact binary (388188) 2006 DP14 using combined radar and optical observations

Contact binaries are found throughout the solar system. The recent discovery of Selam, the satellite of MBA (152830) Dinkinesh, by the NASA LUCY mission has made it clear that the term `contact binary' covers a variety of different types of bi-modal mass distributions and formation mechanisms. Only by modelling more contact binaries can this population be properly understood. We determined a spin state and shape model for the Apollo group contact binary asteroid (388188) 2006 DP14 using ground-based optical and radar observations collected between 2014 and 2023. Radar delay-Doppler images and continuous wave spectra were collected over two days in February 2014, while 16 lightcurves in the Cousins R and SDSS-r filters were collected in 2014, 2022 and 2023. We modelled the spin state using convex inversion before using the SHAPE modelling software to include the radar observations in modelling concavities and the distinctive neck structure connecting the two lobes. We find a spin state with a period of $(5.7860\pm0.0001)$ hours and pole solution of $λ= (180\pm121)^\circ$ and $β= (-80\pm7)^\circ$ with morphology indicating a 520 m long bi-lobed shape. The model's asymmetrical bi-modal mass distribution resembles other small NEA contact binaries such as (85990) 1999 JV6 or (8567) 1996 HW1, which also feature a smaller `head' attached to a larger `body'. The final model features a crater on the larger lobe, similar to several other modelled contact binaries. The model's resolution is 25 m, comparable to that of the radar images used.

astro-ph.EP↗

arXiv2025

The $\texttt{MSG}$ model for cloudy substellar atmospheres: A grid of self-consistent substellar atmosphere models with microphysical cloud formation

State-of-the-art JWST observations are unveiling unprecedented views into the atmospheres of substellar objects in the infrared, further highlighting the importance of clouds. Current forward models struggle to fit the silicate clouds absorption feature at ~$10\,μ$m observed in substellar atmospheres. In the MSG model, we aim to couple the MARCS 1D radiative-convective equilibrium atmosphere model with the 1D kinetic, stationary, non-equilibrium, cloud formation model DRIFT, to create a new grid of self-consistent cloudy substellar atmosphere models with microphysical cloud formation. We aim to test if this new grid is able to reproduce the silicate cloud absorption feature at ~$10\,μ$m. We model substellar atmospheres with effective temperatures in the range 1200-2500 K and with $\log(g)=4.0$. We compute atmospheric structures that self-consistently account for condensate cloud opacities based on microphysical properties. We present an algorithm based on control theory to help converge such self-consistent models. Synthetic atmosphere spectra are computed for each model to explore the observable impact of the cloud microphysics. We additionally explore the impact of choosing different nucleation species (TiO$_2$ or SiO) and the effect of less efficient atmospheric mixing on these spectra. The new MSG cloudy grid using TiO$_2$ nucleation shows spectra which are redder in the near-infrared compared to the currently known population of substellar atmospheres. We find the models with SiO nucleation, and models with reduced mixing efficiency are less red in the near-infrared. The grid is unable to reproduce the silicate features similar to those found in recent JWST observations and Spitzer archival data. We thoroughly discuss further work that may better approximate the impact of convection in cloud-forming regions and steps that may help resolve the silicate cloud feature.

astro-ph.EP↗

arXiv2024

Under the magnifying glass: A combined 3D model applied to cloudy warm Saturn type exoplanets around M-dwarfs

Warm Saturn type exoplanets orbiting M-dwarfs are particularly suitable for in-depth cloud characterisation through transmission spectroscopy due to their favourable stellar to planetary radius contrast. However, modelling cloud formation consistently within the 3D atmosphere remains computationally challenging. The aim is to explore the combined atmospheric and micro-physical cloud structure, and the kinetic gas-phase chemistry for the warm Saturn HATS0-6b orbiting an M-dwarf. A combined 3D cloudy atmosphere model is constructed by iteratively executing the 3D General Circulation Model (GCM) expeRT/MITgcm and a kinetic cloud formation model, each in its full complexity. Resulting cloud particle number densities, sizes, and compositions are used to derive the local cloud opacity which is then utilised in the next GCM iteration. The disequilibrium H/C/O/N gas-phase chemistry is calculated for each iteration to assess the resulting transmission spectrum in post-processing. The cloud opacity feedback causes a temperature inversion at the sub-stellar point and at the evening terminator at gas pressures higher than 0.01 bar. Furthermore, clouds cool the atmosphere between 0.01 bar and 10 bar, and narrow the equatorial wind jet. The transmission spectrum shows muted gas-phase absorption and a cloud particle silicate feature at approximately 10 micron. The combined atmosphere-cloud model retains the full physical complexity of each component and therefore enables a detailed physical interpretation with JWST NIRSpec and MIRI LRS observational accuracy. The model shows that warm Saturn type exoplanets around M-dwarfs are ideal candidates to search for limb asymmetries in clouds and chemistry, identify cloud particle composition by observing their spectral features, and identify the cloud-induced strong thermal inversion that arises on these planets specifically.

astro-ph.EP↗

arXiv2024

A grid of self-consistent MSG (MARCS-StaticWeather-GGchem) cool stellar, sub-stellar, and exoplanetary model atmospheres

Computation of a grid of self consistent 1D model atmospheres of cool stars, sub-stellar objects and exoplanets in the effective temperature range 300K to 3000K, including cloud formation, chemical non-equilibrium effects, and stellar irradiation. The models are called MSG, because they are based on an iterative coupling between three well tested codes, the MARCS stellar atmosphere code, the StaticWeather cloud formation code and the GGchem chemical equilibrium code. It includes up-to-date molecular and atomic opacities, cloud formation and advanced chemical equilibrium calculations, and involves new numerical methods at low temperatures to allow robust convergence. The coupling between the MARCS radiative transfer and GGchem chemical equilibrium computations has made it possibly effectively to reach convergence based on electron pressure for the warmer models and gas pressure for the cooler models, enabling self-consistent modelling of stellar, sub-stellar and exoplanetary objects in a very wide range of effective temperatures. Here we describe the basic details of the models, with illustrative examples of cloudy and irradiated models as well as models based on non-equilibrium chemistry. The qualitative changes in the relative abundances of TiO, H2O, CH4, NH3, and other molecules in our models follow the observationally defined M, L, T (and Y) sequences, but reveal more complex and depth dependent abundance changes, and therefore a spectral classification depending on more parameters. The self consistent coupling to Static-Weather cloud computations, allows detailed comparison between nucleation and observed relative dimming of different spectral bands, with advanced applications for new identification methods of potential exoplanetary biology.

astro-ph.EP↗

arXiv2024

Aggregation and charging of mineral cloud particles under high-energy irradiation

It is known from Earth that ionizing high-energy radiation can lead to ion-induced nucleation of cloud condensation nuclei in the atmosphere. Since the amount of high-energy radiation can vary greatly based on the radiative environment of a host star, understanding the effect of high-energy radiation on cloud particles is critical to understand exoplanet atmospheres. This study aims to explore how high-energy radiation affects the aggregation and charging of mineral cloud particles. We present experiments conducted in an atmosphere chamber on mineral SiO$_2$ particles with diameters of 50 nm. The particles were exposed to gamma radiation in either low-humidity (RH $\approx$ 20%) or high-humidity (RH $>$ 50%) environments. The aggregation and charging state of the particles were studied with a Scanning Mobility Particle Sizer. We find that the single SiO$_2$ particles (N1) cluster to form larger aggregates (N2 - N4), and that this aggregation is inhibited by gamma radiation. We find that gamma radiation shifts the charging of the particles to become more negative, by increasing the charging state of negatively charged particles. Through an independent T-test we find that this increase is statistically significant within a 5% significance level for all aggregates in the high-humidity environment, and for all except the N1 particles in the low-humidity environment. For the positively charged particles the changes in charging state are not within the 5% significance level. We suggest that the overall effect of gamma radiation could favor the formation of a high number of small particles over a lower number of larger particles.

astro-ph.EP↗

arXiv2023

Optical monitoring of the Didymos-Dimorphos asteroid system with the Danish telescope around the DART mission impact

The NASA's Double-Asteroid Redirection Test (DART) was a unique planetary defence and technology test mission, the first of its kind. The main spacecraft of the DART mission impacted the target asteroid Dimorphos, a small moon orbiting asteroid (65803) Didymos, on 2022 September 26. The impact brought up a mass of ejecta which, together with the direct momentum transfer from the collision, caused an orbital period change of 33 +/- 1 minutes, as measured by ground-based observations. We report here the outcome of the optical monitoring campaign of the Didymos system from the Danish 1.54 m telescope at La Silla around the time of impact. The observations contributed to the determination of the changes in the orbital parameters of the Didymos-Dimorphos system, as reported by arXiv:2303.02077, but in this paper we focus on the ejecta produced by the DART impact. We present photometric measurements from which we remove the contribution from the Didymos-Dimorphos system using a H-G photometric model. Using two photometric apertures we determine the fading rate of the ejecta to be 0.115 +/- 0.003 mag/d (in a 2" aperture) and 0.086 +/- 0.003 mag/d (5") over the first week post-impact. After about 8 days post-impact we note the fading slows down to 0.057 +/- 0.003 mag/d (2" aperture) and 0.068 +/- 0.002 mag/d (5"). We include deep-stacked images of the system to illustrate the ejecta evolution during the first 18 days, noting the emergence of dust tails formed from ejecta pushed in the anti-solar direction, and measuring the extent of the particles ejected sunward to be at least 4000 km.

astro-ph.EP↗

arXiv2023

OGLE-2019-BLG-0825: Constraints on the Source System and Effect on Binary-lens Parameters arising from a Five Day Xallarap Effect in a Candidate Planetary Microlensing Event

We present an analysis of microlensing event OGLE-2019-BLG-0825. This event was identified as a planetary candidate by preliminary modeling. We find that significant residuals from the best-fit static binary-lens model exist and a xallarap effect can fit the residuals very well and significantly improves $χ^2$ values. On the other hand, by including the xallarap effect in our models, we find that binary-lens parameters like mass-ratio, $q$, and separation, $s$, cannot be constrained well. However, we also find that the parameters for the source system like the orbital period and semi major axis are consistent between all the models we analyzed. We therefore constrain the properties of the source system better than the properties of the lens system. The source system comprises a G-type main-sequence star orbited by a brown dwarf with a period of $P\sim5$ days. This analysis is the first to demonstrate that the xallarap effect does affect binary-lens parameters in planetary events. It would not be common for the presence or absence of the xallarap effect to affect lens parameters in events with long orbital periods of the source system or events with transits to caustics, but in other cases, such as this event, the xallarap effect can affect binary-lens parameters.

astro-ph.EP↗

arXiv2023

Orbital Period Change of Dimorphos Due to the DART Kinetic Impact

The Double Asteroid Redirection Test (DART) spacecraft successfully performed the first test of a kinetic impactor for asteroid deflection by impacting Dimorphos, the secondary of near-Earth binary asteroid (65803) Didymos, and changing the orbital period of Dimorphos. A change in orbital period of approximately 7 minutes was expected if the incident momentum from the DART spacecraft was directly transferred to the asteroid target in a perfectly inelastic collision, but studies of the probable impact conditions and asteroid properties indicated that a considerable momentum enhancement ($β$) was possible. In the years prior to impact, we used lightcurve observations to accurately determine the pre-impact orbit parameters of Dimorphos with respect to Didymos. Here we report the change in the orbital period of Dimorphos as a result of the DART kinetic impact to be -33.0 +/- 1.0 (3$σ$) minutes. Using new Earth-based lightcurve and radar observations, two independent approaches determined identical values for the change in the orbital period. This large orbit period change suggests that ejecta contributed a significant amount of momentum to the asteroid beyond what the DART spacecraft carried.

astro-ph.EP↗

arXiv2022

Physical properties of near-Earth asteroid (2102) Tantalus from multi-wavelength observations

Between 2010 and 2017 we have collected new optical and radar observations of the potentially hazardous asteroid (2102)~Tantalus from the ESO NTT and Danish telescopes at the La Silla Observatory and from the Arecibo planetary radar. The object appears to be nearly spherical, showing a low amplitude light-curve variation and limited large-scale features in the radar images. The spin-state is difficult to constrain with the available data; including a certain light-curve subset significantly changes the spin-state estimates, and the uncertainties on period determination are significant. Constraining any change in rotation rate was not possible, despite decades of observations. The convex lightcurve-inversion model, with rotational pole at $λ=210{\pm}41$° and $β=-30{\pm}35$°, is more flattened than the two models reconstructed by including radar observations: with prograde ($λ=36{\pm}23$°, $β=30{\pm}15$°), and with retrograde rotation mode ($λ=180{\pm}24$°, $β=-30{\pm}16$°). Using data from WISE we were able to determine that the prograde model produces the best agreement in size determination between radar and thermophysical modelling. Radar measurements indicate possible variation in surface properties, suggesting one side might have lower radar albedo and be rougher at centimetre-to-decimetre scale than the other. However, further observations are needed to confirm this. Thermophysical analysis indicates a surface covered in fine-grained regolith, consistent with radar albedo and polarisation ratio measurements. Finally, geophysical investigation of the spin-stability of Tantalus shows that it could be exceeding its critical spin-rate via cohesive forces.

astro-ph.EP↗

arXiv2019

OGLE-2017-BLG-1186: first application of asteroseismology and Gaussian processes to microlensing

We present the analysis of the event OGLE-2017-BLG-1186 from the 2017 Spitzer microlensing campaign. This is a remarkable microlensing event because its source is photometrically bright and variable, which makes it possible to perform an asteroseismic analysis using ground-based data. We find that the source star is an oscillating red giant with average timescale of $\sim 9$ d. The asteroseismic analysis also provides us source properties including the source angular size ($\sim 27~μ{\rm as}$) and distance ($\sim 11.5$ kpc), which are essential for inferring the properties of the lens. When fitting the light curve, we test the feasibility of Gaussian Processes (GPs) in handling the correlated noise caused by the variable source. We find that the parameters from the GP model are generally more loosely constrained than those from the traditional $χ^2$ minimization method. We note that this event is the first microlensing system for which asteroseismology and GPs have been used to account for the variable source. With both finite-source effect and microlens parallax measured, we find that the lens is likely a $\sim 0.045~M_{\odot}$ brown dwarf at distance $\sim 9.0$ kpc, or a $\sim 0.073~M_{\odot}$ ultracool dwarf at distance $\sim 9.8$ kpc. Combining the estimated lens properties with a Bayesian analysis using a Galactic model, we find a $\sim 35$ per cent probability for the lens to be a bulge object and $\sim 65$ per cent to be a background disc object.

astro-ph.SR↗

arXiv2019

Spitzer Microlensing parallax reveals two isolated stars in the Galactic bulge

We report the mass and distance measurements of two single-lens events from the 2017 Spitzer microlensing campaign. The ground-based observations yield the detection of finite-source effects, and the microlens parallaxes are derived from the joint analysis of ground-based observations and Spitzer observations. We find that the lens of OGLE-2017-BLG-1254 is a $0.60 \pm 0.03 M_{\odot}$ star with $D_{\rm LS} = 0.53 \pm 0.11~\text{kpc}$, where $D_{\rm LS}$ is the distance between the lens and the source. The second event, OGLE-2017-BLG-1161, is subject to the known satellite parallax degeneracy, and thus is either a $0.51^{+0.12}_{-0.10} M_{\odot}$ star with $D_{\rm LS} = 0.40 \pm 0.12~\text{kpc}$ or a $0.38^{+0.13}_{-0.12} M_{\odot}$ star with $D_{\rm LS} = 0.53 \pm 0.19~\text{kpc}$. Both of the lenses are therefore isolated stars in the Galactic bulge. By comparing the mass and distance distributions of the eight published Spitzer finite-source events with the expectations from a Galactic model, we find that the Spitzer sample is in agreement with the probability of finite-source effects occurrence in single lens events.

astro-ph.SR↗

arXiv2019

Asteroseismology of the Hyades red giant and planet host epsilon Tauri

Asteroseismic analysis of solar-like stars allows us to determine physical parameters such as stellar mass, with a higher precision compared to most other methods. Even in a well-studied cluster such as the Hyades, the masses of the red giant stars are not well known, and previous mass estimates are based on model calculations (isochrones). The four known red giants in the Hyades are assumed to be clump (core-helium-burning) stars based on their positions in colour-magnitude diagrams, however asteroseismology offers an opportunity to test this assumption. Using asteroseismic techniques combined with other methods, we aim to derive physical parameters and the evolutionary stage for the planet hosting star epsilon Tau, which is one of the four red giants located in the Hyades. We analysed time-series data from both ground and space to perform the asteroseismic analysis. By combining high signal-to-noise (S/N) radial-velocity data from the ground-based SONG network with continuous space-based data from the revised Kepler mission K2, we derive and characterize 27 individual oscillation modes for epsilon Tau, along with global oscillation parameters such as the large frequency separation and the ratio between the amplitude of the oscillations measured in radial velocity and intensity as a function of frequency. The latter has been measured previously for only two stars, the Sun and Procyon. Combining the seismic analysis with interferometric and spectroscopic measurements, we derive physical parameters for epsilon Tau, and discuss its evolutionary status.

astro-ph.SR↗

arXiv2019

$Spitzer$ Microlensing Parallax for OGLE-2017-BLG-0896 Reveals a Counter-Rotating Low-Mass Brown Dwarf

The kinematics of isolated brown dwarfs in the Galaxy, beyond the solar neighborhood, is virtually unknown. Microlensing has the potential to probe this hidden population, as it can measure both the mass and five of the six phase-space coordinates (all except the radial velocity) even of a dark isolated lens. However, the measurements of both the microlens parallax and finite-source effects are needed in order to recover the full information. Here, we combine $Spitzer$ satellite parallax measurement with the ground-based light curve, which exhibits strong finite-source effects, of event OGLE-2017-BLG-0896. We find two degenerate solutions for the lens (due to the known satellite-parallax degeneracy), which are consistent with each other except for their proper motion. The lens is an isolated brown dwarf with a mass of either $18\pm1M_J$ or $20\pm1M_J$. This is the lowest isolated-object mass measurement to date, only $\sim$45\% more massive than the theoretical deuterium-fusion boundary at solar metallicity, which is the common definition of a free-floating planet. The brown dwarf is located at either $3.9\pm0.1$ kpc or $4.1\pm0.1$ kpc toward the Galactic bulge, but with proper motion in the opposite direction of disk stars, with one solution suggesting it is moving within the Galactic plane. While it is possibly a halo brown dwarf, it might also represent a different, unknown population.

astro-ph.SR↗

arXiv2017

Self-consistent atmosphere modeling with cloud formation for low-mass stars and exoplanets

Context: Low-mass stars and extrasolar planets have ultra-cool atmospheres where a rich chemistry occurs and clouds form. The increasing amount of spectroscopic observations for extrasolar planets requires self-consistent model atmosphere simulations to consistently include the formation processes that determine cloud formation and their feedback onto the atmosphere. Aims: Complement the MARCS model atmosphere suit with simulations applicable to low-mass stars and exoplanets in preparation of E-ELT, JWST, PLATO and other upcoming facilities. Methods: The MARCS code calculates stellar atmosphere models, providing self-consistent solutions of the radiative transfer and the atmospheric structure and chemistry. We combine MARCS with DRIFT, a kinetic model that describes cloud formation in ultra-cool atmospheres (seed formation, growth/ evaporation, gravitational settling, convective mixing, element depletion). Results: We present a small grid of self-consistently calculated atmosphere models for $T_ \text{eff} = 2000 - 3000$ K with solar initial abundances and $\log(g) = 4.5$. Cloud formation in stellar and sub-stellar atmospheres appears for $T_\text{eff} < 2700$ K and has a significant effect on the structure and the spectrum of the atmosphere for $T_\text{eff} < 2400$ K. We have compared the synthetic spectra of our models with observed spectra and found that they fit the spectra of mid to late type M-dwarfs and early type L-dwarfs well. We also test DRIFT-MARCS for an example exoplanet and demonstrate that our simulations reproduce the Spitzer observations for WASP-19b rather well for $T_{\rm eff}=2600$ K, $\log(g)=3.2$ and solar abundances. Our model points at an exoplanet with a deep cloud-free atmosphere with a substantial day-night energy transport and no temperature inversion.

astro-ph.SR↗

arXiv2016

Partition functions 1: Improved partition functions and thermodynamic quantities for normal, equilibrium, and ortho and para molecular hydrogen

Aims. In this work we rigorously show the shortcomings of various simplifications that are used to calculate the total internal partition function. These shortcomings can lead to errors of up to 40 percent or more in the estimated partition function. These errors carry on to calculations of thermodynamic quantities. Therefore a more complicated approach has to be taken. Methods. Seven possible simplifications of various complexity are described, together with advantages and disadvantages of direct summation of experimental values. These were compared to what we consider the most accurate and most complete treatment (case 8). Dunham coefficients were determined from experimental and theoretical energy levels of a number of electronically excited states of H$_2$ . Both equilibrium and normal hydrogen was taken into consideration. Results. Various shortcomings in existing calculations are demonstrated, and the reasons for them are explained. New partition functions for equilibrium, normal, and ortho and para hydrogen are calculated and thermodynamic quantities are reported for the temperature range 1 - 20000 K. Our results are compared to previous estimates in the literature. The calculations are not limited to the ground electronic state, but include all bound and quasi-bound levels of excited electronic states. Dunham coefficients of these states of H$_2$ are also reported. Conclusions. For most of the relevant astrophysical cases it is strongly advised to avoid using simplifications, such as a harmonic oscillator and rigid rotor or ad hoc summation limits of the eigenstates to estimate accurate partition functions and to be particularly careful when using polynomial fits to the computed values. Reported internal partition functions and thermodynamic quantities in the present work are shown to be more accurate than previously available data.

physics.chem-ph↗

arXiv2012

High Frame-rate Imaging Based Photometry, Photometric Reduction of Data from Electron-multiplying Charge Coupled Devices (EMCCDs)

The EMCCD is a type of CCD that delivers fast readout times and negligible readout noise, making it an ideal detector for high frame rate applications which improve resolution, like lucky imaging or shift-and-add. This improvement in resolution can potentially improve the photometry of faint stars in extremely crowded fields significantly by alleviating crowding. Alleviating crowding is a prerequisite for observing gravitational microlensing in main sequence stars towards the galactic bulge. However, the photometric stability of this device has not been assessed. The EMCCD has sources of noise not found in conventional CCDs, and new methods for handling these must be developed. We aim to investigate how the normal photometric reduction steps from conventional CCDs should be adjusted to be applicable to EMCCD data. One complication is that a bias frame cannot be obtained conventionally, as the output from an EMCCD is not normally distributed. Also, the readout process generates spurious charges in any CCD, but in EMCCD data, these charges are visible as opposed to the conventional CCD. Furthermore we aim to eliminate the photon waste associated with lucky imaging by combining this method with shift-and-add. A simple probabilistic model for the dark output of an EMCCD is developed. Fitting this model with the expectation-maximization algorithm allows us to estimate the bias, readout noise, amplification, and spurious charge rate per pixel and thus correct for these phenomena. To investigate the stability of the photometry, corrected frames of a crowded field are reduced with a PSF fitting photometry package, where a lucky image is used as a reference. We find that it is possible to develop an algorithm that elegantly reduces EMCCD data and produces stable photometry at the 1% level in an extremely crowded field.

astro-ph.IM↗

arXiv2009

The properties of the host galaxy and the immediate environment of GRB 980425 / SN 1998bw from the multi-wavelength spectral energy distribution

We present an analysis of the spectral energy distribution (SED) of the galaxy ESO 184-G82, the host of the closest known long gamma-ray burst (GRB) 980425 and its associated supernova (SN) 1998bw. We use our observations obtained at the Australia Telescope Compact Array (the third >3 sigma radio detection of a GRB host) as well as archival infrared and ultraviolet (UV) observations to estimate its star formation state. We find that ESO 184-G82 has a UV star formation rate (SFR) and stellar mass consistent with the population of cosmological GRB hosts and of local dwarf galaxies. However, it has a higher specific SFR (per unit stellar mass) than luminous spiral galaxies. The mass of ESO 184-G82 is dominated by an older stellar population in contrast to the majority of GRB hosts. The Wolf-Rayet region ~800 pc from the SN site experienced a starburst episode during which the majority of its stellar population was built up. Unlike that of the entire galaxy, its SED is similar to those of cosmological submillimeter/radio-bright GRB hosts with hot dust content. These findings add to the picture that in general, the environments of GRBs on 1-3 kpc scales are associated with high specific SFR and hot dust.

astro-ph↗

arXiv2005

The optical afterglow of the short gamma-ray burst GRB 050709

It has long been known that there are two classes of gamma-ray bursts (GRBs), mainly distinguished by their durations. The breakthrough in our understanding of long-duration GRBs (those lasting more than ~2 s), which ultimately linked them with energetic Type Ic supernovae, came from the discovery of their long-lived X-ray and optical afterglows, when precise and rapid localizations of the sources could finally be obtained. X-ray localizations have recently become available for short (duration <2 s) GRBs, which have evaded optical detection for more than 30 years. Here we report the first discovery of transient optical emission (R-band magnitude ~23) associated with a short burst; GRB 050709. The optical afterglow was localized with subarcsecond accuracy, and lies in the outskirts of a blue dwarf galaxy. The optical and X-ray afterglow properties 34 h after the GRB are reminiscent of the afterglows of long GRBs, which are attributable to synchrotron emission from ultrarelativistic ejecta. We did not, however, detect a supernova, as found in most nearby long GRB afterglows, which suggests a different origin for the short GRBs.

astro-ph↗