arXiv subjects

Ulf Zastrau

Publications and source records attributed to Ulf Zastrau.

At least 19 recordsLinked to original sources

arXiv2026

Direct High-Magnetic-Field Coupling to Stripe Order in a Cuprate Superconductor

Superconductivity in cuprates emerges out of a complex normal state that hosts density waves, pseudogap physics, and strange metal properties. Here, we access this normal state by synchronizing free-electron laser x-rays with high-magnetic-field pulses up to 44 T. We observe a linear increase in charge order amplitude and correlation length that persists far above the vortex melting transition. This behavior is incompatible with standard phase competition between charge order and superconductivity. By means of conventional hard x-ray diffraction and magnetostriction, we show that applied fields also enhance monoclinic lattice distortions. However, this magnetoelastic response is weaker and an epiphenomenon of the stripe order enhancement. Combined with recent observations of field-linear spin freezing, our results point to a direct coupling between magnetic field and the spin component of stripe order in the high-field normal state -- a mechanism independent of superconductivity suppression that has so far remained hidden from scattering probes.

cond-mat.str-el↗

arXiv2026

A Momentum-Resolved X-ray Thomson Scattering Benchmark of Electronic-Response Models in Warm Dense Aluminium

The robust diagnosis of conditions generated in warm dense matter (WDM) experiments remains a persistent challenge. Here we describe the measurement of shock-compressed aluminium at 50 GPa with angle-resolved femtosecond x-ray Thomson scattering (XRTS) over a wide range of scattering wavevectors at the European XFEL. The measured plasmon dispersion and line shape show that the de facto standard approach for analysing XRTS spectra, based on uniform-electron-gas models, systematically overestimates the resonance energy by up to 8 eV. We present an ab initio approach that agrees within the experimental uncertainty and demonstrates that accounting for shock-induced disorder is critical for interpreting shock-compressed systems, providing evidence that ab initio treatments are required for reliable XRTS inference in warm dense aluminium.

physics.plasm-ph↗

arXiv2026

Probing ultrafast heating and ionization dynamics in solid density plasmas with time-resolved resonant X-ray absorption and emission

Heating and ionization are among the most fundamental processes in relativistic laser--solid interactions; however, their spatiotemporal evolution remains challenging to capture experimentally. Here we present detailed diagnosis of high-intensity laser interactions with wire targets, leveraging the extreme spectral brightness of an X-ray free-electron laser in sub-picosecond time-resolved resonant X-ray emission spectroscopy and absorption imaging. Experimental results are compared with comprehensive simulations using atomic collisional--radiative models, particle-in-cell, and magnetohydrodynamics codes to elucidate the underlying physics. These multi-scale simulations reveal extreme sensitivity of basic plasma parameters with widely used models, such as temperature and ionization depth, which are able to be constrained by incorporating a detailed accounting of laser spatial profiles, pre-plasma conditions, and collisional processes. These results provide new insights into heating and ionization dynamics in the high-energy-density regime relevant to inertial fusion energy research, both as an experimental platform for accessing theoretically challenging conditions and as a benchmark for improving models of high-power laser--plasma interactions.

physics.plasm-ph↗

arXiv2026

Roadmap for warm dense matter physics

This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the warm dense matter physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technology, diagnostic capabilities, and computer simulation techniques. Only in the last decade has it become possible to perform accurate enough simulations \& experiments to truly verify theoretical results as well as to reliably design experiments based on predictions. Consequently, this roadmap discusses recent developments and contemporary challenges that are faced by theoretical methods, and experimental techniques needed to create and diagnose warm dense matter. A large part of this roadmap is dedicated to specific warm dense matter systems and applications in astrophysics, inertial confinement fusion and novel material synthesis.

physics.plasm-ph↗

arXiv2026

XFEL Imaging Techniques for High Energy Density and Inertial Fusion Energy Research at HED-HiBEF

The imaging platform developed at the High Energy Density - Helmholtz International Beamline for Extreme Fields (HED-HiBEF) instrument at the European XFEL and its applications to high energy density and fusion related research are presented. The platform combines the XFEL beam with the high-intensity short-pulse laser ReLaX and the high-energy nanosecond-pulse laser DiPOLE-100X. The spatial resolution is better than 500 nm and the temporal resolution of the order of 50 fs. We show examples of blast waves and converging cylindrical shocks in aluminium, resonant absorption measurements of specific charged states in copper with ReLaX and planar shocks in polystyrene material generated by DiPOLE-100X. We also discuss the possibilities introduced by combining this imaging platform with a kJ-class laser.

physics.plasm-ph↗

arXiv2025

Orientational Effects in the Low Pair Continuum of Aluminium

We compare the predictions of the dynamic structure factor (DSF) of ambient polycrystalline aluminium from time-dependent density functional theory (TDDFT) in the pair continuum regime to recent ultrahigh resolution x-ray Thomson scattering measurements, collected at the European XFEL. TDDFT predicts strong anisotropy in the DSF at the wavenumber examined here, even with $q$-blurring accounted for. The experimental spectrum has more than sufficient resolution and signal-to-noise levels to resolve these orientation dependencies, and therefore the orientational averaging of the polycrystalline sample is observed rigorously. Once the orientation averaging is accounted for, TDDFT is able to reproduce the experimental spectrum adequately. Finally, comparisons of predicted DSFs from jellium to experiment demonstrates the importance of accounting for lattice effects in modelling the spectrum from a polycrystal.

cond-mat.mtrl-sci↗

arXiv2025

High-Quality Ultra-Fast Total Scattering and Pair Distribution Function Data using an X-ray Free Electron Laser

High-quality total scattering data, a key tool for understanding atomic-scale structure in disordered materials, require stable instrumentation and access to high momentum transfers. This is now routine at dedicated synchrotron instrumentation using high-energy X-ray beams, but it is very challenging to measure a total scattering dataset in less than a few microseconds. This limits their effectiveness for capturing structural changes that occur at the much faster timescales of atomic motion. Current X-ray free-electron lasers (XFELs) provide femtosecond-pulsed X-ray beams with maximum energies of approximately 24 keV, giving the potential to measure total scattering and the attendant pair distribution functions (PDFs) on femtosecond timescales. Here, we show that this potential has been realised using the HED scientific instrument at the European XFEL and present normalised total scattering data for 0.35 Å-1 < Q < 16.6 Å-1 and their PDFs from a broad spectrum of materials, including crystalline, nanocrystalline and amorphous solids, liquids, and clusters in solution. We analyse the data using a variety of methods, including Rietveld refinement, small-box PDF refinement, joint reciprocal-real space refinement, cluster refinement, and Debye scattering analysis. The resolution function of the setup is also characterised. We conclusively show that high-quality data can be obtained from a single approximately 30 fs XFEL pulse. Our efforts not only significantly increase the existing maximum reported Q-range for an S(Q) measured at an XFEL but also mean that XFELs are now a viable X-ray source for the broad community of people using reciprocal space total scattering and PDF methods in their research.

cond-mat.mtrl-sci↗

arXiv2025

Observation of Body-Centered Cubic Iron above 200 Gigapascals

The crystallographic structure of iron under extreme conditions is a key benchmark for cutting-edge experimental and numerical methods. Moreover, it plays a crucial role in understanding planetary cores, as it significantly influences the interpretation of observational data and, consequently, insights into their internal structure and dynamics. However, even the structure of pure solid iron under the Earth's core conditions remains uncertain, with the commonly expected hexagonal close-packed structure energetically competitive with various cubic lattices. In this study, iron was compressed in a diamond anvil cell to above 200 GPa, and dynamically probed near the melting point using MHz frequency X-ray pulses from the European X-ray Free Electron Laser. The emergence of an additional diffraction line at high temperatures suggests the formation of an entropically stabilized bcc structure. Rapid heating and cooling cycles captured intermediate phases, offering new insights into iron's phase transformation paths. The appearance of the bcc phase near melting at extreme pressures challenges current understanding of the iron phase diagram under Earth's core conditions.

cond-mat.mtrl-sci↗

arXiv2025

Demonstration of full-scale spatio-temporal diagnostics of solid-density plasmas driven by an ultra-short relativistic laser pulse using an X-ray free-electron laser

Understanding the complex plasma dynamics in ultra-intense relativistic laser-solid interactions is of fundamental importance to the applications of laser plasma-based particle accelerators, creation of high energy-density matter, understanding of planetary science and laser-driven fusion energy. However, experimental efforts in this regime have been limited by the accessibility of over-critical density and spatio-temporal resolution of conventional diagnostics. Over the last decade, the advent of femtosecond brilliant hard X-ray free electron lasers (XFELs) is opening new horizons to break these limitations. Here, for the first time we present full-scale spatio-temporal measurements of solid-density plasma dynamics, including preplasma generation with tens of nanometer-scale length driven by the leading edge of a relativistic laser pulse, ultrafast heating and ionization at the main pulse arrival, laser-driven blast shock waves and transient surface return current-induced compression dynamics up to hundreds of picoseconds after interaction. These observations are enabled by utilizing a novel combination of advanced X-ray diagnostics such as small-angle X-ray scattering (SAXS), resonant X-ray emission spectroscopy (RXES), and propagation-based X-ray phase-contrast imaging (XPCI) simultaneously at the European XFEL-HED beamline station.

physics.plasm-ph↗

arXiv2025

Bounds on heavy axions with an X-ray free electron laser

We present new exclusion bounds obtained at the European X-ray Free Electron Laser facility (EuXFEL) on axion-like particles (ALPs) in the mass range 10^{-3} eV < m_a < 10^4 eV. Our experiment exploits the Primakoff effect via which photons can, in the presence of a strong external electric field, decay into axions, which then convert back into photons after passing through an opaque wall. While similar searches have been performed previously at a 3^rd generation synchrotron, our work demonstrates improved sensitivity, exploiting the higher brightness of X-rays at EuXFEL.

hep-ph↗

arXiv2025

Strong geometry dependence of the X-ray Thomson Scattering Spectrum in single crystal silicon

We report on results from an experiment at the European XFEL where we measured the x-ray Thomson scattering (XRTS) spectrum of single crystal silicon with ultrahigh resolution. Compared to similar previous experiments, we consider a more complex scattering setup, in which the scattering vector changes orientation through the crystal lattice. In doing so, we are able to observe strong geometric dependencies in the inelastic scattering spectrum of silicon at low scattering angles. Furthermore, the high quality of the experimental data allows us to benchmark state-of-the-art TDDFT calculations, and demonstrate TDDFT's ability to accurately predict these geometric dependencies. Finally, we note that this experimental data was collected at a much faster rate than another recently reported dataset using the same setup, demonstrating that ultrahigh resolution XRTS data can be collected in more general experimental scenarios.

cond-mat.mtrl-sci↗

arXiv2024

X-ray induced grain boundary formation and grain rotation in Bi2Se3

Optimizing grain boundary characteristics in polycrystalline materials can improve their properties. Many processing methods have been developed for grain boundary manipulation, including the use of intense radiation in certain applications. In this work, we used X-ray free electron laser pulses to irradiate single-crystalline bismuth selenide (Bi2Se3) and observed grain boundary formation and subsequent grain rotation in response to the X-ray radiation. Our observations with simultaneous transmission X-ray microscopy and X-ray diffraction demonstrate how intense X- ray radiation can rapidly change size and texture of grains.

cond-mat.mtrl-sci↗

arXiv2024

Formation of high-aspect-ratio nanocavity in LiF crystal using a femtosecond of x-ray FEL pulse

Sub-picosecond optical laser processing of metals is actively utilized for modification of a heated surface layer. But for deeper modification of different materials a laser in the hard x-ray range is required. Here, we demonstrate that a single 9-keV x-ray pulse from a free-electron laser can form a um-diameter cylindrical cavity with length of ~1 mm in LiF surrounded by shock-transformed material. The plasma-generated shock wave with TPa-level pressure results in damage, melting and polymorphic transformations of any material, including transparent and non-transparent to conventional optical lasers. Moreover, cylindrical shocks can be utilized to obtain a considerable amount of exotic high-pressure polymorphs. Pressure wave propagation in LiF, radial material flow, formation of cracks and voids are analyzed via continuum and atomistic simulations revealing a sequence of processes leading to the final structure with the long cavity. Similar results can be produced with semiconductors and ceramics, which opens a new pathway for development of laser material processing with hard x-ray pulses.

physics.plasm-ph↗

arXiv2024

Effects of Mosaic Crystal Instrument Functions on X-ray Thomson Scattering Diagnostics

Mosaic crystals, with their high integrated reflectivities, are widely-employed in spectrometers used to diagnose high energy density systems. X-ray Thomson scattering (XRTS) has emerged as a powerful diagnostic tool of these systems, providing in principle direct access to important properties such as the temperature via detailed balance. However, the measured XRTS spectrum is broadened by the spectrometer instrument function (IF), and without careful consideration of the IF one risks misdiagnosing system conditions. Here, we consider in detail the IF of 40 $μ$m and 100 $μ$m mosaic HAPG crystals, and how the broadening varies across the spectrometer in an energy range of 6.7-8.6 keV. Notably, we find a strong asymmetry in the shape of the IF towards higher energies. As an example, we consider the effect of the asymmetry in the IF on the temperature inferred via XRTS for simulated 80 eV CH plasmas, and find that the temperature can be overestimated if an approximate symmetric IF is used. We therefore expect a detailed consideration of the full IF will have an important impact on system properties inferred via XRTS in both forward modelling and model-free approaches.

physics.plasm-ph↗

arXiv2024

Ultrahigh Resolution X-ray Thomson Scattering Measurements at the European XFEL

Using a novel ultrahigh resolution ($ΔE \sim 0.1\,$eV) setup to measure electronic features in x-ray Thomson scattering (XRTS) experiments at the European XFEL in Germany, we have studied the collective plasmon excitation in aluminium at ambient conditions, which we can measure very accurately even at low momentum transfers. As a result, we can resolve previously reported discrepancies between ab initio time-dependent density functional theory simulations and experimental observations. The demonstrated capability for high-resolution XRTS measurements will be a game changer for the diagnosis of experiments with matter under extreme densities, temperatures, and pressures, and unlock the full potential of state-of-the-art x-ray free electron laser (XFEL) facilities to study planetary interior conditions, to understand inertial confinement fusion applications, and for material science and discovery.

physics.plasm-ph↗

arXiv2024

Speed of sound in methane under conditions of planetary interiors

We present direct observations of acoustic waves in warm dense matter. We analyze wave-number- and energy-resolved x-ray spectra taken from warm dense methane created by laser heating a cryogenic liquid jet. X-ray diffraction and inelastic free-electron scattering yield sample conditions of 0.3$\pm$0.1 eV and 0.8$\pm$0.1 g/cm$^3$, corresponding to a pressure of $\sim$13 GPa. Inelastic x-ray scattering was used to observe the collective oscillations of the ions. With a highly improved energy resolution of $\sim$50 meV, we could clearly distinguish the Brillouin peaks from the quasielastic Rayleigh feature. Data at different wave numbers were utilized to derive a sound speed of 5.9$\pm$0.5 km/s, marking a high-temperature data point for methane and demonstrating consistency with Birch's law in this parameter regime.

physics.plasm-ph↗

arXiv2024

Cylindrical compression of thin wires by irradiation with a Joule-class short pulse laser

Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition rate of the lasers. Here, we show that by the irradiation of a thin wire with single beam Joule-class short-pulse laser, a converging cylindrical shock is generated compressing the wire material to conditions relevant for the above applications. The shockwave was observed using Phase Contrast Imaging employing a hard X-ray Free Electron Laser with unprecedented temporal and spatial sensitivity. The data collected for Cu wires is in agreement with hydrodynamic simulations of an ablative shock launched by a highly-impulsive and transient resistive heating of the wire surface. The subsequent cylindrical shockwave travels towards the wire axis and is predicted to reach a compression factor of 9 and pressures above 800 Mbar. Simulations for astrophysical relevant materials underline the potential of this compression technique as a new tool for high energy density studies at high repetition rates.

physics.plasm-ph↗

arXiv2023

Ultra-fast yttrium hydride chemistry at high pressures via non-equilibrium states induced by x-ray free electron laser

Controlling the formation and stoichiometric content of desired phases of materials has become a central interest for the study of a variety of fields, notably high temperature superconductivity under extreme pressures. The further possibility of accessing metastable states by initiating reactions by x-ray triggered mechanisms over ultra-short timescales is enabled with the development of x-ray free electron lasers (XFEL). Utilizing the exceptionally high brilliance x-ray pulses from the EuXFEL, we report the synthesis of a previously unobserved yttrium hydride under high pressure, along with non-stoichiometric changes in hydrogen content as probed at a repetition rate of 4.5\,MHz using time-resolved x-ray diffraction. Exploiting non-equilibrium pathways we synthesize and characterize a hydride with yttrium cations in an \textit{A}15 structure type at 125\,GPa, predicted using crystal structure searches, with a hydrogen content between 4.0--5.75 hydrogens per cation, that is enthalpically metastable on the convex hull. We demonstrate a tailored approach to changing hydrogen content using changes in x-ray fluence that is not accessible using conventional synthesis methods, and reveals a new paradigm in metastable chemical physics.

cond-mat.mtrl-sci↗