Searcharxiv⌕ Search

arXiv subjects

Ulrike Diebold

Publications and source records attributed to Ulrike Diebold.

At least 55 records · Page 3Linked to original sources

Real-space investigation of polarons in hematite Fe2O3

In polarizable materials, electronic charge carriers interact with the surrounding ions, leading to quasiparticle behaviour. The resulting polarons play a central role in many materials properties including electrical transport, optical properties, surface reactivity and magnetoresistance, and polaron properties are typically investigated indirectly through such macroscopic characteristics. Here, noncontact atomic force microscopy (nc-AFM) is used to directly image polarons in Fe2O3 at the single quasiparticle limit. A combination of Kelvin probe force microscopy (KPFM) and kinetic Monte Carlo (KMC) simulations shows that Ti doping dramatically enhances the mobility of electron polarons, and density functional theory (DFT) calculations indicate that a metallic transition state is responsible for the enhancement. In contrast, hole polarons are significantly less mobile and their hopping is hampered further by the introduction of trapping centres.

cond-mat.mtrl-sci↗

Hematite $α-Fe_{2}O_{3}(0001)$ in top and side view: resolving long-standing controversies about its surface structure

Hematite $α-Fe_{2}O_{3}(0001)$ is the most-investigated iron oxide model system in photo and electrocatalytic research. The rich chemistry of Fe and O allows for many bulk and surface transformations, but their control is challenging. This has led to controversies regarding the structure of the topmost layers. This comprehensive study combines surface methods (nc-AFM, STM, LEED, and XPS) complemented by structural and chemical analysis of the near-surface bulk (HRTEM and EELS). The results show that a compact 2D layer constitutes the topmost surface of $α-Fe_{2}O_{3}(0001)$; it is locally corrugated due to the mismatch with the bulk. Assessing the influence of naturally-occurring impurities shows that these can force the formation of surface phases that are not stable on pure samples. Impurities can also cause the formation of ill-defined inclusions in the subsurface and modify the oxidation phase diagram of hematite. The results provide a significant step forward in determining the hematite surface structure that is crucial for accurately modeling catalytic reactions. Combining surface and cross-sectional imaging provided the full view that is essential for understanding the evolution of the near-surface region of oxide surfaces under oxidative conditions.

cond-mat.mtrl-sci↗

Single Rh adatoms stabilized on α-Fe2O3(1-102) by co-adsorbed water

Oxide-supported single-atom catalysts are commonly modelled as a metal atom substituting surface cation sites in a low-index surface. Adatoms with dangling bonds will inevitably coordinate molecules from the gas phase, and adsorbates such as water can affect both stability and catalytic activity. Here, we use scanning tunneling microscopy (STM), noncontact atomic force microscopy (ncAFM), and x-ray photoelectron spectroscopy (XPS) to show that high densities of single Rh adatoms are stabilized on alpha-Fe2O3(1-102) in the presence of 2x10^(-8) mbar of water at room temperature, in marked contrast to the rapid sintering observed under UHV conditions. Annealing to 50 °C in UHV desorbs all water from the substrate leaving only the OH groups coordinated to Rh, and high-resolution ncAFM images provide a direct view into the internal structure. We provide direct evidence of the importance of OH ligands in the stability of single atoms, and argue that their presence should be assumed when modelling SAC systems.

cond-mat.mtrl-sci↗

Rapid oxygen exchange between hematite and water vapor

Oxygen exchange at oxide/liquid and oxide/gas interfaces is important in technology and environmental studies, as it is closely linked to both catalytic activity and material degradation. The atomic-scale details are mostly unknown, however, and are often ascribed to poorly defined defects in the crystal lattice. Here we show that even thermodynamically stable, well-ordered surfaces can be surprisingly reactive. Specifically, we show that all the 3-fold coordinated lattice oxygen atoms on a defect-free single-crystalline r-cut (1-102) surface of hematite (α-Fe2O3) are exchanged with oxygen from surrounding water vapor within minutes at temperatures below 70 °C, while the atomic-scale surface structure is unperturbed by the process. A similar behavior is observed after liquid water exposure, but the experimental data clearly show most of the exchange happens during desorption of the final monolayer, not during immersion. Density functional theory computations show that the exchange can happen during on-surface diffusion, where the cost of the lattice oxygen extraction is compensated by the stability of an HO-HOH-OH complex. Such insights into lattice oxygen stability are highly relevant for many research fields ranging from catalysis and hydrogen production to geochemistry and paleoclimatology.

cond-mat.mtrl-sci↗

CO oxidation by Pt2/Fe3O4: metastable dimer and support configurations facilitate lattice oxygen extraction

Heterogeneous catalysts based on sub-nanometer metal clusters often exhibit strongly size-dependent properties, and the addition or removal of a single atom can make all the difference. Identifying the most active species and deciphering the reaction mechanism is extremely difficult, however, because it is often not clear how the catalyst evolves in operando. Here, we utilize a combination of atomically resolved scanning probe microscopies, spectroscopic techniques, and density functional theory (DFT)-based calculations to study CO oxidation by a model Pt/Fe3O4(001) single-atom catalyst. We demonstrate that (PtCO)2 dimers, formed dynamically through the agglomeration of mobile Pt-carbonyl species, catalyse a reaction involving the oxide support to form CO2. Pt2 dimers produce one CO2 molecule before falling apart into two adatoms, releasing the second CO. Interestingly, Olattice extraction only becomes facile when both the Pt-dimer and the Fe3O4 support can access metastable configurations, suggesting that substantial, concerted rearrangements of both cluster and support must be considered for reactions occurring at elevated temperature.

cond-mat.mtrl-sci↗

Automated Real-Space Lattice Extraction for Atomic Force Microscopy Images

Analyzing atomically resolved images is a time-consuming process requiring solid experience and substantial human intervention. In addition, the acquired images contain a large amount of information such as crystal structure, presence and distribution of defects, and formation of domains, which need to be resolved to understand a material's surface structure. Therefore, machine learning techniques have been applied in scanning probe and electron microscopies during the last years, aiming for automatized and efficient image analysis. This work introduces a free and open source tool (AiSurf: Automated Identification of Surface Images) developed to inspect atomically resolved images via Scale-Invariant Feature Transform (SIFT) and Clustering Algorithms (CA). AiSurf extracts primitive lattice vectors, unit cells, and structural distortions from the original image, with no pre-assumption on the lattice and minimal user intervention. The method is applied to various atomically resolved non-contact atomic force microscopy (AFM) images of selected surfaces with different levels of complexity: anatase TiO2(101), oxygen deficient rutile TiO2(110) with and without CO adsorbates, SrTiO3(001) with Sr vacancies and graphene with C vacancies. The code delivers excellent results and has proved to be robust against atom misclassification and noise, thereby facilitating the interpretation scanning probe microscopy images.

cond-mat.mtrl-sci↗

Competing electronic states emerging on polar surfaces

Excess charge on polar surfaces of ionic compounds is commonly described by the two-dimensional electron gas (2DEG) model, a homogeneous distribution of charge, spatially-confined in a few atomic layers. Here, by combining scanning probe microscopy with density functional theory calculations, we show that excess charge on the polar TaO$_2$ termination of KTaO$_3$(001) forms more complex electronic states with different degrees of spatial and electronic localization: charge density waves (CDW) coexist with strongly-localized electron polarons and bipolarons. These surface electronic reconstructions, originating from the combined action of electron-lattice interaction and electronic correlation, are energetically more favorable than the 2DEG solution. They exhibit distinct spectroscopy signals and impact on the surface properties, as manifested by a local suppression of ferroelectric distortions. Controlling the degree of charge ordering and the transition from ferroelectric to paraelectric states could be of great benefit for the generation and transport of carriers in electronic applications.

cond-mat.mtrl-sci↗

Machine Learning for Exploring Small Polaron Configurational Space

Polaron defects are ubiquitous in materials and play an important role in many processes involving carrier mobility, charge transfer and surface reactivity. Determining the spatial distribution of small polarons is essential to understand materials properties and functionalities. This requires an exploration of the configurational space, which is computationally demanding when using standard first principles methods, and technically prohibitive for many-polaron systems. Here, we propose a machine-learning (ML) accelerated search that compares the energy stability of different polaron patterns and determines the ground state configuration. The kernel-regression based ML model is trained on databases generated by density functional theory (DFT) calculations on a minimal set of initial polaron patterns, obtained by using either molecular dynamics simulations or a random sampling approach. To establish an efficient mapping between training data and configuration stability we designed simple descriptors that model the interactions among polarons and charged point defects. The proposed DFT+ML protocol is used here to explore millions of polaron configurations for two different systems, oxygen defective rutile TiO$_2$(110) and Nb-doped SrTiO$_3$(001). Our data shows that the ML-aided search correctly individuates the ground-state polaron patterns, proposes polaronic configurations not visited in the training and can be used to efficiently determine the optimal distribution of polarons at any charge concentration.

cond-mat.mtrl-sci↗

Surface Reduction State Determines Stabilization and Incorporation of Rh on α-Fe2O3(1-102)

Iron oxides (FeOx) are among the most common support materials utilized in single atom catalysis. The support is nominally Fe2O3, but strongly reductive treatments are usually applied to activate the as-synthesized catalyst prior to use. Here, we study Rh adsorption and incorporation on the (1-102) surface of hematite (α-Fe2O3), which switches from a stoichiometric (1x1) termination to a reduced (2x1) reconstruction in reducing conditions. Rh atoms form clusters at room temperature on both surface terminations, but Rh atoms incorporate into the support lattice as isolated atoms upon annealing above 400 °C. Under mildly oxidizing conditions, the incorporation process is so strongly favoured that even large Rh clusters containing hundreds of atoms dissolve into the surface. Based on a combination of low energy ion scattering and scanning tunnelling microscopy data, as well as density functional theory, we conclude that the Rh atoms are stabilized in the immediate subsurface, rather than the surface layer.

cond-mat.mtrl-sci↗

Atomic-scale studies of Fe3O4(001) and TiO2(110) surfaces following immersion in CO2-acidified water

Difficulties associated with the integration of liquids into a UHV environment make surface-science style studies of mineral dissolution particularly challenging. Recently, we developed a novel experimental setup for the UHV-compatible dosing of ultrapure liquid water, and studied its interaction with TiO2 and Fe3O4 surfaces. Here, we describe a simple approach to vary the pH through the partial pressure of CO2 (pCO2) in the surrounding vacuum chamber, and use this to study how these surfaces react to an acidic solution. The TiO2(110) surface is unaffected by the acidic solution, except for a small amount of carbonaceous contamination. The Fe3O4(001)-(rt2 x rt2)R45 surface begins to dissolve at a pH 4.0-3.9 (pCO2 = 0.8-1 bar) and, although it is significantly roughened, the atomic-scale structure of the Fe3O4(001) surface layer remains visible in scanning tunneling microscopy (STM) images. X-ray photoelectron spectroscopy (XPS) reveals that the surface is chemically reduced, and contains a significant accumulation of bicarbonate (HCO3-) species. These observations are consistent with Fe(II) being extracted by bicarbonate ions, leading to dissolved iron bicarbonate complexes (Fe(HCO3)2), which precipitate onto the surface when the water evaporates.

cond-mat.mtrl-sci↗

Ni modified Fe3O4(001) surface as a simple model system for understanding the Oxygen Evolution Reaction

Electrochemical water splitting is an environmentally friendly technology to store renewable energy in the form of chemical fuels. Among the earth-abundant first-row transition metal-based catalysts, mixed Ni-Fe oxides have shown promising performance for effective and low-cost catalysis of the oxygen evolution reaction (OER) in alkaline media, but the synergistic roles of Fe and Ni cations in the OER mechanism remain unclear. In this work, we report how addition of Ni changes the reactivity of a model iron oxide catalyst, based on Ni deposited on and incorporated in a magnetite Fe3O4 (001) single crystal, using a combination of surface science techniques in ultra-high-vacuum such as low energy electron diffraction (LEED), x-rays photoelectron spectroscopy (XPS), low energy ion scattering (LEIS), and scanning tunneling microscopy (STM), as well as atomic force microscopy (AFM) in air, and electrochemical methods such cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in alkaline media. A significant improvement in the OER activity is observed when the top surface presents an Fe:Ni composition ratio in the range 20-40%, which is in good agreement with what has been observed for powder catalysts. Furthermore, a decrease in the OER overpotential is observed following surface aging in electrolyte for three days. At higher Ni load, AFM shows the growth of a new phase attributed to an (oxy)-hydroxide phase which, according to CV measurements, does not seem to correlate with the surface activity towards OER. EIS suggests that the OER precursor species observed on the clean and Ni-modified surfaces are similar and Fe-centered, but form at lower overpotentials when the surface Fe:Ni ratio is optimized.

cond-mat.mtrl-sci↗

Unravelling CO adsorption on model single-atom catalysts

Understanding how the local environment of a single-atom catalyst affects stability and reactivity remains a significant challenge. We present an in-depth study of Cu1, Ag1, Au1, Ni1, Pd1, Pt1, Rh1, and Ir1 species on Fe3O4(001); a model support where all metals occupy the same 2-fold coordinated adsorption site upon deposition at room temperature. Surface science techniques revealed that CO adsorption strength at single metal sites differs from the respective metal surfaces and supported clusters. Charge transfer into the support modifies the d-states of the metal atom and the strength of the metal-CO bond. These effects could strengthen the bond (as for Ag1-CO) or weaken it (as for Ni1-CO), but CO-induced structural distortions reduce adsorption energies from those expected based on electronic structure alone. The extent of the relaxations depends on the local geometry and could be predicted by analogy to coordination chemistry.

cond-mat.mtrl-sci↗

An oxygen-rich, tetrahedral surface phase on high-temperature rutile VO$_2$(110)$_\text{T}$ single crystals

Vanadium dioxide undergoes a metal-insulator transition (MIT) from an insulating (monoclinic) to a metallic (tetragonal) phase close to room temperature, which makes it a promising functional material for many applications, e.g. as chemical sensors. Not much is known about its surface and interface properties, although these are critical in many of its applications. This work presents an atomic-scale investigation of the tetragonal rutile VO$_2$(110)$_\text{T}$ single-crystal surface and reports results obtained with scanning tunneling microscopy (STM), low-energy electron diffraction (LEED) and X-ray photoelectron spectroscopy (XPS), supported by density-functional theory-based (DFT) calculations. The surface reconstructs into an oxygen-rich (2$\times$2) superstructure that coexists with small patches of the underlying, unreconstructed (110)-(1$\times$1) surface. The best structural model for the (2$\times$2) surface termination, conceptually derived from a vanadium pentoxide (001) monolayer, consists of rings of corner-shared tetrahedra. Over a wide range of oxygen chemical potentials this reconstruction is more stable than the unreconstructed (110) surface as well as models proposed in the literature.

cond-mat.mtrl-sci↗

Does a pristine, unreconstructed SrTiO$_3$(001) surface exist?

The surfaces of perovskite oxides affect their functional properties, and while a bulk-truncated (1$\times$1) termination is generally assumed, its existence and stability is controversial. Here, such a surface is created by cleaving the prototypical SrTiO$_3$(001) in ultra-high vacuum, and its response to thermal annealing is observed. Atomically resolved nc-AFM shows that intrinsic point defects on the as-cleaved surface migrate at temperatures above 200\,$^\circ$C. At 400--500\,$^\circ$C, a disordered surface layer forms, albeit still with a (1$\times$1) pattern in LEED. Purely TiO$_2$-terminated surfaces, prepared by wet-chemical treatment, are also disordered despite their (1$\times$1) periodicity in LEED.

cond-mat.mtrl-sci↗

2D Surface Phase Diagram of a Multicomponent Perovskite Oxide: La$_{0.8}$Sr$_{0.2}$MnO$_3$(110)

The many surface reconstructions of (110)-oriented lanthanum--strontium manganite (La$_{0.8}$Sr$_{0.2}$MnO$_3$, LSMO) were followed as a function of the oxygen chemical potential ($μ_\text{O}$) and the surface cation composition. Decreasing $μ_\text{O}$ causes Mn to migrate across the surface, enforcing phase separation into A-site-rich areas and a variety of composition-related, structurally diverse B-site-rich reconstructions. The composition of these phase-separated structures was quantified with scanning tunneling microscopy (STM), and these results were used to build a 2D phase diagram of the LSMO(110) equilibrium surface structures.

cond-mat.mtrl-sci↗

IrO2 Surface Complexions Identified Through Machine Learning and Surface Investigations

A Gaussian Approximation Potential (GAP) was trained using density-functional theory data to enable a global geometry optimization of low-index rutile IrO2 facets through simulated annealing. Ab initio thermodynamics identifies (101) and (111) (1x1)-terminations competitive with (110) in reducing environments. Experiments on single crystals find that (101) facets dominate, and exhibit the theoretically predicted (1x1) periodicity and X-ray photoelectron spectroscopy (XPS) core level shifts. The obtained structures are analogous to the complexions discussed in the context of ceramic battery materials.

cond-mat.mtrl-sci↗

Fast low-noise transimpedance amplifier for scanning tunneling microscopy and beyond

A transimpedance amplifier has been designed for scanning tunneling microscopy (STM). The amplifier features low noise (limited by the Johnson noise of the 1 GΩ feedback resistor at low input current and low frequencies), sufficient bandwidth for most STM applications (50 kHz at 35 pF input capacitance), a large dynamic range (0.1 pA--50 nA without range switching), and a low input voltage offset. The amplifier is also suited for placing its first stage into the cryostat of a low-temperature STM, minimizing the input capacitance and reducing the Johnson noise of the feedback resistor. The amplifier may also find applications for specimen current imaging and electron-beam-induced current measurements in scanning electron microscopy and as a photodiode amplifier with a large dynamic range. This paper also discusses the sources of noise including the often neglected effect of non-balanced input impedance of operational amplifiers and describes how to accurately measure and adjust the frequency response of low-current transimpedance amplifiers.

physics.ins-det↗

Few-monolayer yttria-doped zirconia films: Segregation and phase stabilization

For most applications, zirconia (ZrO2) is doped with yttria. Doping leads to the stabilization of the tetragonal or cubic phase, and increased oxygen ion conductivity. Most previous surface studies of yttria-doped zirconia were plagued by impurities, however. We have studied doping of pure, 5-monolayer ZrO2 films on Rh(111) by x-ray photoelectron spectroscopy (XPS), scanning tunneling microscopy (STM), and low-energy electron diffraction (LEED). STM and LEED show that the tetragonal phase is stabilized by unexpectedly low dopant concentrations, 0.5 mol% Y2O3, even when the films are essentially fully oxidized (as evidenced by XPS core level shifts). XPS also shows Y segregation to the surface with an estimated segregation enthalpy of $-23 \pm 4$\,kJ/mol.

cond-mat.mtrl-sci↗