arXiv subjects

Usman A. Javid

Publications and source records attributed to Usman A. Javid.

16 recordsLinked to original sources

arXiv2024

Terahertz Voltage-controlled Oscillator from a Kerr-Induced Synchronized Soliton Microcomb

The generation of controlled and arbitrarily tunable terahertz radiation, essential for many applications, has proven challenging due to the complexity of experimental setups and fabrication techniques. We introduce a new strategy involving control over a terahertz repetition rate integrated frequency comb, using Kerr-induced synchronization, that results in a terahertz-voltage-controlled oscillator. By modulating the reference laser, we can transfer any microwave waveform onto the microcomb repetition rate via a linear transfer function based on optical frequency division. The resulting frequency comb with a terahertz carrier can be created using integrated components, with a bandwidth constrained only by the synchronization bandwidth and high coherence resulting from the low-noise soliton microcomb in the Kerr-induced synchronized state.

physics.optics↗

arXiv2024

AC-Josephson Effect and Sub-Comb Mode-Locking in a Kerr-Induced Synchronized Cavity Soliton

Kerr-induced synchronization (KIS) [1] involves the capture of a dissipative Kerr soliton (DKS) microcomb [2] tooth by a reference laser injected into the DKS resonator. This phase-locking behavior is described by an Adler equation whose analogous form describes numerous other physical systems [3], such as Josephson junctions [4]. We present an AC version of KIS whose behavior is similar to microwave-driven Josephson junctions, where periodic synchronization occurs as so-called Shapiro steps. We demonstrate consistent results in the AC-KIS dynamics predicted by the Adler model, Lugiato-Lefever equation, and experimental data from a chip-integrated microresonator system. The (integer) Shapiro steps in KIS can simply be explained as the sideband created through the reference laser phase modulation triggering the synchronization. Notably, our optical system allows for easy tuning of the Adler damping parameter, enabling the further observation of fractional-Shapiro steps, where the synchronization happens at a fraction of the driving microwave frequency. Here, we show that the comb tooth is indirectly captured thanks to a four-wave mixing Bragg-scattering process, leading to sub-comb mode-locking, and we demonstrate this experimentally through noise considerations. Our work opens the door to the study of synchronization phenomena in the context of microresonator frequency combs, synthesis of condensed-matter state analogues with DKSs, and the use of the fractional Shapiro steps for flexible and tunable access to the KIS regime.

physics.optics↗

arXiv2023

Kerr-Induced Synchronization of a Cavity Soliton to an Optical Reference

The phase-coherent frequency division of a stabilized optical reference laser to the microwave domain is made possible by optical frequency combs (OFCs). Fundamentally, OFC-based clockworks rely on the ability to lock one comb tooth to this reference laser, which probes a stable atomic transition. The active feedback process associated with locking the comb tooth to the reference laser introduces complexity, bandwidth, and power requirements that, in the context of chip-scale technologies, complicate the push to fully integrate OFC photonics and electronics for fieldable clock applications. Here, we demonstrate passive, electronics-free synchronization of a microresonator-based dissipative Kerr soliton (DKS) OFC to a reference laser. We show that the Kerr nonlinearity within the same resonator in which the DKS is generated enables phase locking of the DKS to the externally injected reference. We present a theoretical model to explain this Kerr-induced synchronization (KIS), and find that its predictions for the conditions under which synchronization occur closely match experiments based on a chip-integrated, silicon nitride microring resonator. Once synchronized, the reference laser is effectively an OFC tooth, which we show, theoretically and experimentally, enables through its frequency tuning the direct external control of the OFC repetition rate. Finally, we examine the short- and long-term stability of the DKS repetition rate and show that the repetition rate stability is consistent with the frequency division of the expected optical clockwork system.

physics.optics↗

arXiv2023

Multi-mode microcavity frequency engineering through a shifted grating in a photonic crystal ring

Frequency engineering of whispering-gallery resonances is essential in microcavity nonlinear optics. The key is to control the frequencies of the cavity modes involved in the underlying nonlinear optical process to satisfy its energy conservation criterion. Compared to the conventional method that tailors dispersion by the cross-sectional geometry, thereby impacting all cavity mode frequencies, grating-assisted microring cavities, often termed as photonic crystal microrings, provide more enabling capabilities through mode-selective frequency control. For example, a simple single period grating added to a microring has been used for single-frequency engineering in Kerr optical parametric oscillation (OPO) and frequency combs. Recently, this approach has been extended to multi-frequency engineering by using multi-period grating functions, but at the cost of increasingly complex grating profiles that require challenging fabrication. Here, we demonstrate a simple approach, which we term as shifted grating multiple mode splitting (SGMMS), where spatial displacement of a single period grating imprinted on the inner boundary of the microring creates a rotational asymmetry that frequency splits multiple adjacent cavity modes. This approach is easy to implement and presents no additional fabrication challenges than an un-shifted grating, and yet is very powerful in providing multi-frequency engineering functionality for nonlinear optics. We showcase an example where SGMMS enables OPO generation across a wide range of pump wavelengths in a normal-dispersion device that otherwise would not support OPO.

physics.optics↗

arXiv2023

Electrically empowered microcomb laser

Optical frequency comb underpins a wide range of applications from communication, metrology, to sensing. Its development on a chip-scale platform -- so called soliton microcomb -- provides a promising path towards system miniaturization and functionality integration via photonic integrated circuit (PIC) technology. Although extensively explored in recent years, challenges remain in key aspects of microcomb such as complex soliton initialization, high threshold, low power efficiency, and limited comb reconfigurability. Here we present an on-chip laser that directly outputs microcomb and resolves all these challenges, with a distinctive mechanism created from synergetic interaction among resonant electro-optic effect, optical Kerr effect, and optical gain inside the laser cavity. Realized with integration between a III-V gain chip and a thin-film lithium niobate (TFLN) PIC, the laser is able to directly emit mode-locked microcomb on demand with robust turnkey operation inherently built in, with individual comb linewidth down to 600 Hz, whole-comb frequency tuning rate exceeding $\rm 2.4\times10^{17}$ Hz/s, and 100% utilization of optical power fully contributing to comb generation. The demonstrated approach unifies architecture and operation simplicity, high-speed reconfigurability, and multifunctional capability enabled by TFLN PIC, opening up a great avenue towards on-demand generation of mode-locked microcomb that is expected to have profound impact on broad applications.

physics.optics↗

arXiv2022

Chip-scale Simulations in a Quantum-correlated Synthetic Space

An efficient simulator for quantum systems is one of the original goals for the efforts to develop a quantum computer [1]. In recent years, synthetic dimension in photonics [2] have emerged as a potentially powerful approach for simulation that is free from the constraint of geometric dimensionality. Here we demonstrate a quantum-correlated synthetic crystal, based upon a coherently-controlled broadband quantum frequency comb produced in a chip-scale dynamically modulated lithium niobate microresonator. The time-frequency entanglement inherent with the comb modes significantly extends the dimensionality of the synthetic space, creating a massive nearly 400 x 400 synthetic lattice with electrically-controlled tunability. With such a system, we are able to utilize the evolution of quantum correlations between entangled photons to perform a series of simulations, demonstrating quantum random walks, Bloch oscillations, and multi-level Rabi oscillations in the time and frequency correlation space. The device combines the simplicity of monolithic nanophotonic architecture, high dimensionality of a quantum-correlated synthetic space, and on-chip coherent control, which opens up an avenue towards chip-scale implementation of large-scale analog quantum simulation and computation [1,3,4] in the time-frequency domain.

physics.optics↗

arXiv2022

High-speed tunable microwave-rate soliton microcomb

Microwave signal generation with fast frequency tuning underlies many applications including sensing, imaging, ranging, time keeping, wireless communication, and high-speed electronics. Soliton microcombs are a promising new approach for photonic-based microwave signal synthesis. To date, however, tuning rate has been limited in microcombs (and in frequency combs generally). Here, we demonstrate the first microwave-rate soliton microcomb whose repetition rate can be tuned at a high speed. By integrating an electro-optic tuning/modulation element into a lithium niobate comb microresonator, a modulation bandwidth up to 75 MHz and a continuous frequency modulation rate up to 5.0 * 10^14 Hz/s are achieved, several orders-of-magnitude faster than existing microcomb technology. These features are especially useful for disciplining an optical VCO to a long-term reference such as an optical clock or for tight phase lock in dual-microcomb clocks or synthesizers. Moreover, the microwave signal rate can be set to any X - W band rate. Besides its positive impact on microwave photonics, fast repetition rate control is generally important in all applications of frequency combs.

physics.optics↗

arXiv2022

Self-injection-locked second-harmonic integrated source

High coherence visible and near-visible laser sources are centrally important to the operation of advanced position/navigation/timing systems as well as classical/quantum sensing systems. However, the complexity and size of these bench-top lasers is an impediment to their transitioning beyond the laboratory. Here, a system-on-a-chip that emits high-coherence visible and near-visible lightwaves is demonstrated. The devices rely upon a new approach wherein wavelength conversion and coherence increase by self-injection-locking are combined within in a single nonlinear resonator. This simplified approach is demonstrated in a hybridly-integrated device and provides a short-term linewidth around 10-30 kHz. On-chip, converted optical power over 2 mW is also obtained. Moreover, measurements show that heterogeneous integration can result in conversion efficiency higher than 25% with output power over 11 mW. Because the approach uses mature III-V pump lasers in combination with thin-film lithium niobate, it can be scaled for low-cost manufacturing of high-coherence visible emitters. Also, the coherence generation process can be transferred to other frequency conversion processes including optical parametric oscillation, sum/difference frequency generation, and third-harmonic generation.

physics.optics↗

arXiv2022

Integrated Pockels Laser

The development of integrated semiconductor lasers has miniaturized traditional bulky laser systems, enabling a wide range of photonic applications. A progression from pure III-V based lasers to III-V/external cavity structures has harnessed low-loss waveguides in different material systems, leading to significant improvements in laser coherence and stability. Despite these successes, however, key functions remain absent. In this work, we address a critical missing function by integrating the Pockels effect into a semiconductor laser. Using a hybrid integrated III-V/Lithium Niobate structure, we demonstrate several essential capabilities that have not existed in previous integrated lasers. These include a record-high frequency modulation speed of 2 exahertz/s (2.0$\times$10$^{18}$ Hz/s) and fast switching at 50 MHz, both of which are made possible by integration of the electro-optic effect. Moreover, the device co-lases at infrared and visible frequencies via the second-harmonic frequency conversion process, the first such integrated multi-color laser. Combined with its narrow linewidth and wide tunability, this new type of integrated laser holds promise for many applications including LiDAR, microwave photonics, atomic physics, and AR/VR.

physics.optics↗

arXiv2021

Nonreciprocity in Photon Pair Correlations

Nonreciprocal optical systems have found many applications altering the linear transmission of light as a function of its propagation direction. Here we consider a new class of nonreciprocity which appears in photon pair correlations and not in linear transmission. We experimentally demonstrate and theoretically verify this nonreciprocity in the second-order coherence functions of photon pairs produced by spontaneous four-wave mixing in a silicon microdisk. Reversal of the pump propagation direction can result in substantial extinction of the coherence functions without altering pump transmission.

physics.optics↗

arXiv2021

Cavity optomechanical sensing in the nonlinear saturation limit

Photonic sensors based upon high-quality optical microcavities have found a wide variety of applications ranging from inertial sensing, electro- and magnetometry to chemical and biological sensing. These sensors have a dynamic range limited by the linewidth of the cavity mode transducing the input. This dynamic range not only determines the range of the signal strength that can be detected, but also affects the resilience of the sensor to large deteriorating external perturbations and shocks in a practical environment. Unfortunately, there is a general trade-off between the detection sensitivity and the dynamic range, which undermines the performance of all microcavity-based sensors. Here we propose an approach to extend the dynamic range significantly beyond the cavity linewidth limit, in the nonlinear modulation regime, without degrading the detection sensitivity for weak signals. With a cavity optomechanical system, we experimentally demonstrate a dynamic range six times larger than the cavity linewidth, far beyond the conventional linear region of operation for such a sensor. The approach demonstrated here will help design microcavity-based sensors to achieve high detection sensitivity and a large dynamic range at the same time, a crucial property for their use in a practical environment.

physics.optics↗

arXiv2021

Ultra-broadband Entangled Photons on a Nanophotonic Chip

Nanophotonic entangled-photon sources are a critical building block of chip-scale quantum photonic architecture and have seen significant development over the past two decades. These sources generate photon pairs that typically span over a narrow frequency bandwidth. Generating entanglement over a wide spectral region has proven to be useful in a wide variety of applications including quantum metrology, spectroscopy and sensing, and optical communication. However, generation of broadband photon pairs with temporal coherence approaching an optical cycle on a chip is yet to be seen. Here we demonstrate generation of ultra-broadband entangled photons using spontaneous parametric down-conversion in a periodically-poled lithium niobate nanophotonic waveguide. We employ dispersion engineering to achieve a bandwidth of 100 THz (1.2 - 2 $μ$m), at a high efficiency of 13 GHz/mW. The photons show strong temporal correlations and purity with the coincidence-to-accidental ratio exceeding $10^5$ and $>$ 98\% two-photon interference visibility. These properties together with the piezo-electric and electro-optic control and reconfigurability, make thin-film lithium niobate an excellent platform for a controllable entanglement source for quantum communication and computing, and open a path towards femtosecond metrology and spectroscopy with non-classical light on a nanophotonic chip.

physics.optics↗

arXiv2020

Lithium niobate photonic-crystal electro-optic modulator

Modern advanced photonic integrated circuits require dense integration of high-speed electro-optic functional elements on a compact chip that consumes only moderate power. Energy efficiency, operation speed, and device dimension are thus crucial metrics underlying almost all current developments of photonic signal processing units. Recently, thin-film lithium niobate (LN) emerges as a promising platform for photonic integrated circuits. Here we make an important step towards miniaturizing functional components on this platform, reporting probably the smallest high-speed LN electro-optic modulators, based upon photonic crystal nanobeam resonators. The devices exhibit a significant tuning efficiency up to 1.98 GHz/V, a broad modulation bandwidth of 17.5 GHz, while with a tiny electro-optic modal volume of only 0.58 $μ{\rm m}^3$. The modulators enable efficient electro-optic driving of high-Q photonic cavity modes in both adiabatic and non-adiabatic regimes, and allow us to achieve electro-optic switching at 11 Gb/s with a bit-switching energy as low as 22 fJ. The demonstration of energy efficient and high-speed electro-optic modulation at the wavelength scale paves a crucial foundation for realizing large-scale LN photonic integrated circuits that are of immense importance for broad applications in data communication, microwave photonics, and quantum photonics.

physics.app-ph↗

arXiv2019

Quantum correlations from dynamically modulated optical nonlinear interactions

We investigate optical nonlinear interactions in a dynamic environment by studying generation of photons in spontaneous parametric down conversion inside a nonlinear cavity where the optical path length is periodically modulated in time. We show that the temporal dynamics of the cavity modify the nonlinear interaction and the generated continuous variable time-frequency entangled bi-photon state evolves into a tunable discrete higher dimensional state in the non-adiabatic modulation regime where the modulation time scales are much faster than the photon lifetime. In this regime, the system mimics effects of a quantum random walk in a photonic lattice with many associated effects including localized and delocalized wavefunctions of the generated photons. We also propose generation of time-frequency hyper-entangled states in the adiabatic limit. Our analysis shows that the proposed system is promising for applications in quantum simulation and information processing in the time-frequency domain.

physics.optics↗

arXiv2019

Temporally Asymmetric Bi-photon States in Cavity Enhanced Optical Parametric Processes

Generation and control of quantum states of light on an integrated platform has become an essential tool for scalable quantum technologies. Chip scale sources such as nonlinear optical microcavities have been demonstrated to efficiently generate entangled bi-photon states. However these systems have little control over the continuous variable time-energy entanglement of the photons. We demonstrate such control by preparing bi-photon states with asymmetric temporal wavefunctions by selectively modifying the density of states of the cavity modes taking part in the interaction using Rayleigh scattering-induced strong coupling of optical modes of a resonator. These states reveal exotic coherence properties and show a path forward for continuous variable quantum state engineering on a chip.

physics.optics↗

arXiv2018

Coherent quantum dynamics of systems with coupling-induced creation pathways

Many technologies emerging from quantum information science heavily rely upon the generation and manipulation of entangled quantum states. Here, we propose and demonstrate a new class of quantum interference phenomena that arise when states are created in and coherently converted between the propagating modes of an optical microcavity. The modal coupling introduces several new creation pathways to a nonlinear optical process within the device, which quantum mechanically interfere to drive the system between states in the time domain. The coherent conversion entangles the generated biphoton states between propagation pathways, leading to cyclically evolving path-entanglement and the manifestation of coherent oscillations in second-order temporal correlations. Furthermore, the rich device physics is harnessed to tune properties of the quantum states. In particular, we show that the strength of interference between pathways can be coherently controlled, allowing for manipulation of the degree of entanglement, which can even be entirely quenched. The states can likewise be made to flip-flop between exhibiting initially correlated or uncorrelated behavior. Based upon these observations, a proposal for extending beyond a single device to create exotic multi-photon states is also discussed.

quant-ph↗