SearcharxivSearch

arXiv subjects

Ute Drechsler

Publications and source records attributed to Ute Drechsler.

9 recordsLinked to original sources

Observation of ring states in a delicate topological insulator

Topological insulators are typically characterized by particularly stable properties, such as global invariants, and can be identified by probing their robust surface states. A recently discovered novel form of band topology, delicate topology, challenges this paradigm: its defining property, multicellularity, can be removed by introducing a coupling to local orbitals anywhere in the spectrum, even far above the relevant band gap. This makes it hard to diagnose delicate topology with conventional probes that access only low-energy degrees of freedom. Here, we introduce strong local impurities as a spectroscopic probe of a delicate topological insulator which we realize in a phononic metamaterial. By tuning the impurity strength and performing orbital-resolved readout, we observe recently proposed indicators of topology: ring states, in-gap bound states whose frequencies remain pinned in the strong-impurity limit while their real-space profiles form a pronounced ring around the impurity site. We find that these ring states persist even when the multicellularity in our system is removed by a weakly hybridizing additional orbital. Our results establish impurity-induced ring states as probes of complex multiband physics, including delicate topological phases.

cond-mat.mes-hall

Microscale architected materials for elastic wave guiding: Fabrication and dynamic characterization across length and time scales

We present an experimental protocol for the fabrication and characterization of scalable microarchitected elastic waveguides. Using silicon microfabrication techniques, we develop free-standing 2D truss-based architected waveguides with a maximum diameter of 80 mm, unit cells size of 100 micrometer, and minimum beam width of 5 micrometer, thus achieving scale separation. To characterize elastic wave propagation, we introduce a custom-built scanning optical pump-probe experiment that enables contactless excitation of elastic wave modes and full spatio-temporal reconstruction of wave propagation across hundreds of unit cells with sub-unit cell resolution. Results on periodic architectures show excellent agreement with finite element simulations and equivalent experimental data at larger length scales. Motivated by scalable computational inverse design, we fabricate a specific example of a spatially graded waveguide and demonstrate its ability to guide elastic waves along an arbitrary pre-designed path.

physics.app-ph

Advanced SQUID-on-lever scanning probe for high-sensitivity magnetic microscopy with sub-100-nm spatial resolution

Superconducting quantum interference devices (SQUIDs) are exceptionally sensitive magnetometers capable of detecting weak magnetic fields. Miniaturizing these devices and integrating them onto scanning probes enables high-resolution imaging at low-temperature. Here, we fabricate nanometer-scale niobium SQUIDs with inner-loop sizes down to 10 nm at the apex of individual planar silicon cantilevers via a combination of wafer-scale optical lithography and focused-ion-beam (FIB) milling. These robust SQUID-on-lever probes overcome many of the limitations of existing devices, achieving spatial resolution better than 100 nm, magnetic flux sensitivity of $0.3~μΦ_0/\sqrt{\rm{Hz}}$, and operation in magnetic fields up to about 0.5 T at 4.2 K. Nanopatterning via Ne- or He-FIB allows for the incorporation of a modulation line for coupling magnetic flux into the SQUID or a third Josephson junction for shifting its phase. Such advanced functionality, combined with high spatial resolution, large magnetic field range, and the ease of use of a cantilever-based scanning probe, extends the applicability of scanning SQUID microscopy to a wide range of magnetic, normal conducting, superconducting, and quantum Hall systems. We demonstrate magnetic imaging of skyrmions at the surface of bulk Cu$_2$OSeO$_3$. Analysis of the point spread function determined from imaging a single skyrmion yields a full-width-half-maximum of 87 nm. Moreover, we image modulated magnetization patterns with a period of 65 nm.

cond-mat.supr-con

Graded phononic metamaterials: Scalable design meets scalable microfabrication

Metamaterials are a new generation of advanced materials, exhibiting engineered microstructures that enable customized material properties not found in nature. The dynamics of metamaterials are particularly fascinating, promising the capability to guide, attenuate, and focus waves at will. Phononic metamaterials aim to manipulate mechanical waves with broad applications in acoustics, elastodynamics, and structural vibrations. A key bottleneck in the advancement of phononic metamaterials is scalability -- in design, simulation, and especially fabrication (e.g., beyond tens of unit cells per spatial dimension). We present a framework for scalable inverse design of spatially graded metamaterials for elastic wave guiding, together with a scalable microfabrication method. This framework enables the design and realization of complex waveguides including hundreds of thousands of unit cells, with the potential to extend to millions with no change in protocol. Scalable design is achieved via optimization with a ray tracing model for waves in spatially graded beam lattices. Designs are fabricated by photolithography and etching of silicon wafers to create free-standing microarchitected films. Wave guiding is demonstrated experimentally, using pulsed laser excitation and an interferometer for displacement measurements. Broadband wave guiding is demonstrated, indicating the promise of our scalable design and fabrication methods for on-chip elastic wave manipulation.

physics.app-ph

Bidirectional microwave-optical conversion with an integrated soft-ferroelectric barium titanate transducer

Efficient, low-noise, and high-bandwidth transduction between optical and microwave photons is key to long-range quantum communication between distant superconducting quantum processors. Recent demonstrations of microwave-optical transduction using the broadband direct electro-optic (Pockels) effect in optical thin films made of AlN or LiNbO$_3$ have shown promise. To improve efficiency and added noise, materials with larger Pockels coefficients, such as the soft ferroelectrics BaTiO$_3$ or SrTiO$_3$, are required. However, these materials require adapted designs and fabrication approaches due to their nonlinear and, in some cases, hysteretic electro-optic response. Here, we engineer an on-chip, triply resonant transducer comprising low-loss BaTiO$_3$-on-SiO$_2$ waveguides monolithically integrated with a superconducting microwave resonator made of Nb. We demonstrate bidirectional microwave-optical transduction and reach total off-chip efficiencies of $1\times10^{-6}$ using pulsed pumping. Our novel device concept permits in-situ poling of the ferroelectric material without introducing excess microwave loss, using a fully subtractive fabrication process with superconducting air bridges. In addition, we investigate optically induced heating, revealing fast thermalization and quasiparticle resilience of the microwave resonator. Our transducer concept and fabrication process are applicable to other materials with a large bias-induced Pockels effect and pave the way for efficient, low-power quantum interconnects.

physics.optics

Gate Electrodes Enable Tunable Nanofluidic Particle Traps

The ability to control the location of nanoscale objects in liquids is essential for fundamental and applied research from nanofluidics to molecular biology. To overcome their random Brownian motion, the electrostatic fluidic trap creates local minima in potential energy by shaping electrostatic interactions with a tailored wall topography. However, this strategy is inherently static -- once fabricated the potential wells cannot be modulated. Here, we propose and experimentally demonstrate that such a trap can be controlled through a buried gate electrode.We measure changes in the average escape times of nanoparticles from the traps to quantify the induced modulations of $0.7k_\rm{B}T$ in potential energy and 50 mV in surface potential. Finally, we summarize the mechanism in a parameter-free predictive model, including surface chemistry and electrostatic fringing, that reproduces the experimental results. Our findings open a route towards real-time controllable nanoparticle traps.

cond-mat.soft

Ultrafast tunable lasers using lithium niobate integrated photonics

Recent advances in the processing of thin-film LNOI have enabled low-loss photonic integrated circuits, modulators with improved half-wave voltage, electro-optic frequency combs and novel on-chip electro-optic devices, with applications ranging from 5G telecommunication and microwave photonics to microwave-to-optical quantum interfaces. Lithium niobate integrated photonic circuits could equally be the basis of integrated narrow-linewidth frequency-agile lasers. Pioneering work on polished lithium niobate crystal resonators has led to the development of electrically tunable narrow-linewidth lasers. Here we report low-noise frequency-agile lasers based on lithium niobate integrated photonics and demonstrate their use for coherent laser ranging. This is achieved through heterogeneous integration of ultra-low-loss silicon nitride photonic circuits with thin-film lithium niobate via direct wafer bonding. This platform features low propagation loss of 8.5 dB/m enabling narrow-linewidth lasing (intrinsic linewidth of 3 kHz) by self-injection locking to a III-V semiconductor laser diode. The hybrid mode of the resonator allows electro-optical laser frequency tuning at a speed of 12 PHz/s with high linearity, low hysteresis and while retaining narrow linewidth. Using this hybrid integrated laser, we perform a proof-of-concept FMCW LiDAR ranging experiment, with a resolution of 15 cm. By fully leveraging the high electro-optic coefficient of lithium niobate, with further improvements in photonic integrated circuits design, these devices can operate with CMOS-compatible voltages, or achieve mm-scale distance resolution. Endowing low loss silicon nitride integrated photonics with lithium niobate, gives a platform with wide transparency window, that can be used to realize ultrafast tunable lasers from the visible to the mid-infrared, with applications from OCT and LiDAR to environmental sensing.

physics.optics

Quantized thermal conductance in metallic heterojunctions

To develop next-generation electronics and high efficiency energy-harvesting devices, it is crucial to understand how charge and heat are transported at the nanoscale. Metallic atomic-size contacts are ideal systems to probe the quantum limits of transport. The thermal and electrical conductance of gold atomic contacts has been recently proven to be quantized at room temperature. However, a big experimental challenge in such measurements is represented by the fast breaking dynamics of metallic junctions at room temperature, which can exceed the typical response time of the thermal measurement. Here we use a break-junction setup that combines Scanning Tunneling Microscopy with suspended micro electro-mechanical systems with a gold-covered membrane and an integrated heater acting also as thermometer. By using other metals as tip materials, namely Pt, PtIr and W, we show heat transport measurements through single gold atomic contacts. The dependence of the thermal conductance is analysed as function of contact size and material used. We find that by using Pt and Pt-Ir tips we can maximize the mechanical stability and probability of forming single Au atomic contacts. We then show the quantization of the electrical and thermal conductance with the verification of the Wiedemann-Franz law at the atomic scale. We expect these findings to increase the flexibility of experimental techniques probing heat transport in metallic quantum point contacts and to enable the investigation of thermal properties of molecular junctions.

cond-mat.mes-hall

Heat transport through atomic contacts

Metallic atomic junctions pose the ultimate limit to the scaling of electrical contacts. They serve as model systems to probe electrical and thermal transport down to the atomic level as well as quantum effects occurring in one-dimensional systems. Charge transport in atomic junctions has been studied intensively in the last two decades. However, heat transport remains poorly characterized because of significant experimental challenges. Specifically the combination of high sensitivity to small heat fluxes and the formation of stable atomic contacts has been a major hurdle for the development of this field. Here we report on the realization of heat transfer measurements through atomic junctions and analyze the thermal conductance of single atomic gold contacts at room temperature. Simultaneous measurements of charge and heat transport reveal the proportionality of electrical and thermal conductance, quantized with the respective conductance quanta. This constitutes an atomic scale verification of the well-known Wiedemann-Franz law. We anticipate that our findings will be a major advance in enabling the investigation of heat transport properties in molecular junctions, with meaningful implications towards the manipulation of heat at the nanoscale

cond-mat.mes-hall