arXiv subjects

Uwe Hübner

Publications and source records attributed to Uwe Hübner.

12 recordsLinked to original sources

arXiv2026

Two-Photon-Induced Direct 3D Printing of Freeform High-Index Phase-Change Sb2S3 Nanostructures

Chalcogenides have recently emerged as an important class of phase-change materials (PCMs) for nanophotonics, owing to their very high refractive index (RI) and low optical loss in the visible to near-infrared range. They exhibit an ultralarge RI change (> 0.7) upon phase transition, which can be triggered by multiple stimuli such as electrical bias, laser illumination or thermal heating. These properties make them highly appealing materials for flat optics and metasurface applications. Current nanophotonic implementations of chalcogenide PCMs mostly rely on two-dimensional (2D) or quasi three-dimensional (3D) thin film patterning based on the coating of chalcogenide materials from a solid-state target. This limits fast prototyping of 3D freeform micro- and nanostructures, thus restricting geometric design freedom and device functionality. Here, we demonstrate a solution-phase direct printing of chalcogenide PCMs into functional structures. The method is based on dip in two photon-induced solidification (DITPS) of a specially synthesized antimony trisulfide (Sb2S3) precursor solution. Direct printing with DITPS is simple, maskless, fast and cost effective, enabling true freeform 3D printing of photonic devices with sub micron resolution. We show direct writing of Sb2S3 helices with different wire cross section profiles on gold and ITO substrates, as well as functional planar Fresnel zone plates (FZPs) and computer generated hologram metasurfaces (CGHMs) in a single printing step. This freeform DITPS approach thus enables rapid 3D prototyping of high index metasurfaces and opens a route to integrating high-index PCMs into existing photonic architectures and device platforms.

physics.optics↗

arXiv2026

Measuring coherent dynamics of a superconducting qubit in an open waveguide

We measured the relaxation and decoherence rates of a superconducting transmon qubit in a resonator-free setting. In our experiments, the qubit is coupled to an open coplanar waveguide such that the transmission of microwaves through this line depends on the qubit's state. To determine the occupation of the first excited qubit energy level, we introduced a two-pulse technique. The first applied pulse, at a frequency close to the eigenfrequency of the qubit, serves to excite the qubit. A second pulse is then used for probing the transition between the first and second excited energy levels. Utilizing this measurement technique allowed for the reconstruction of the relaxation dynamics and Rabi oscillations. Furthermore, we demonstrate the consistency between the extracted parameters and the corresponding estimations from frequency-domain measurements.

quant-ph↗

arXiv2026

Effect of hybrid field coupling in nanostructured surfaces on anisotropic signal detection in nanoscale infrared spectroscopic imaging methods

Anisotropic intensity distributions on nanostructured surfaces and polarization-sensitive spectra have been observed in a number of nanoscale infrared spectroscopic imaging methods, including nano-FTIR [Bakir et al., Molecules, 2020, 25, 4295], photothermal induced resonance (PTIR) [Waeytens et al., Analyst, 2021, 146], tapping AFM-IR [Hondl et al., ACS Meas. Sci. Au, 2025, 5, 469; Luo et al., APL, 2022, 121, 23330], infrared photoinduced force microscopy (PiF-IR) [Anindo et al., JPCC, 2025, 129, 4517; Shcherbakov et al., Rev Methods Primers, 2025, 5, 1; Ali et al., Anal. Chem., 2025, 97, 23914] and peak force infrared microscopy (PFIR) [Xie et al., JPCC, 2022, 126, 8393; Anindo, JPCC, 2025]. A recent work combining modeling and experiment demonstrated that the hybrid field coupling of the IR illumination E0 with a polymer nanosphere and a metallic AFM probe is nearly as strong as the plasmonic coupling in case of a gold nanosphere [Anindo, JPCC, 2025]. For p-polarized illumination, this results in enhanced IR absorption on the surface perpendicular to the propagation of E0 which can explain the observed anisotropic intensity distribution. An additional anisotropy may be introduced by aligned surface molecules with oriented vibrational transition moments [Bakir et al., Molecules, 2020, 25, 4295; Luo, APL, 2022]. PiF-IR is strongly surface sensitive combining an unprecedented spatial resolution < 5 nm with high spectral resolution [Shcherbakov, Rev Methods Primers, 2025; Ali, Anal. Chem., 2025], which allows, for example, to visualize nanoscale chemical variation on the surface of bacteria cells affected by antimicrobial interaction [Ali, Anal. Chem., 2025]. We compare PiF-IR hyperspectra of aligned perylene Langmuir Blodgett monolayers on nanostructured and planar gold substrates and use quantum chemical calculations of the oriented vibrational oscillators to interpret the observations.

cond-mat.mes-hall↗

arXiv2025

Microscopy X-ray Imaging enriched with Small Angle X-ray Scattering for few nanometer resolution reveals shock waves and compression in intense short pulse laser irradiation of solids

Understanding how laser pulses compress solids into high-energy-density states requires diagnostics that simultaneously resolve macroscopic geometry and nanometer-scale structure. Here we present a combined X-ray imaging (XRM) and small-angle X-ray scattering (SAXS) approach that bridges this diagnostic gap. Using the Matter in Extreme Conditions end station at LCLS, we irradiated 25-micrometer copper wires with 45-fs, 0.9-J, 800-nm pulses at 3.5e19 W/cm2 while probing with 8.2-keV XFEL pulses. XRM visualizes the evolution of ablation, compression, and inward-propagating fronts with about 200-nm resolution, while SAXS quantifies their nanometer-scale sharpness through the time-resolved evolution of scattering streaks. The joint analysis reveals that an initially smooth compression steepens into a nanometer-sharp shock front after roughly 18 ps, consistent with an analytical steepening model and hydrodynamic simulations. The front reaches a velocity of about 25 km/s and a lateral width of several tens of micrometers, demonstrating for the first time the direct observation of shock formation and decay at solid density with few-nanometer precision. This integrated XRM-SAXS method establishes a quantitative, multiscale diagnostic of laser-driven shocks in dense plasmas relevant to inertial confinement fusion, warm dense matter, and planetary physics.

physics.plasm-ph↗

arXiv2025

Positive-tone Nanolithography of Antimony Trisulfide with Femtosecond Laser Wet-etching

Antimony trisulfide ($Sb_{2}S_{3}$), as an emerging material for integrated photonic devices, has attracted significant attention due to its high index, low loss, and phase-changing property in the optical regime. However, conventional lithography-based fabrication methods involve complex, time-consuming, multistep processes, rendering the photonic application of $Sb_{2}S_{3}$ challenging. Here, we demonstrate that positive-tone fabrication of $Sb_{2}S_{3}$ nanostructures using wet-etch femtosecond laser processing, a straightforward technique for the engraving of micro- and nanoscale structures, can address major fabrication challenges. The patterning mechanism and factors influencing resolution of $Sb_{2}S_{3}$ thin film structures deposited on quartz (transmissive) and gold (reflective) substrates are experimentally investigated and supported by theoretical modelling. Using this approach, the smallest linewidth fabricated is measured at 178 nm. Consequently, multiple test patterns are demonstrated showing versatile functionalities. Functional Fresnel Zone Plates (FZPs) with varying focal length are fabricated and characterized. This study provides a significantly simplified approach for realizing $Sb_{2}S_{3}$ based integrated photonic devices.

physics.optics↗

arXiv2025

Soft X-ray imaging with coherence tomography in the water window spectral range using high-harmonic generation

High-harmonic generation (HHG) is used as a source for various imaging applications in the extreme ultraviolet spectral range. It offers spatially coherent radiation and unique elemental contrast with the potential for attosecond time resolution. The unfavorable efficiency scaling to higher photon energies prevented the imaging application in the soft X-ray range so far. In this work we demonstrate the feasibility of using harmonics for imaging in the water window spectral region (284$\,$eV to 532$\,$eV). We achieve nondestructive depth profile imaging in a heterostructure by utilizing a broadband and noise-resistant technique called soft X-ray Coherence Tomography (SXCT) at a high-flux lab-scale HHG source. SXCT is derived from Optical Coherence Tomography, a Fourier based technique, that can use the full bandwidth of the source to reach an axial resolution of 12$\,$nm in this demonstration. The employed source covers the entire water window, with a photon flux exceeding 10$^\text{6}\,$photons/eV/s at a photon energy of 500$\,$eV. We show local cross sections of a sample consisting of Aluminium oxide and Platinum layers of varying thickness on a Zinc oxide substrate. We validate the findings with scanning and transmission electron microscopy after preparation with focused ion beam milling.

physics.optics↗

arXiv2024

Grayscale Electron Beam Lithography Direct Patterned Antimony Sulfide

The rise of micro/nanooptics and lab-on-chip devices demands the fabrication of three-dimensional structures with decent resolution. Here, we demonstrate the combination of grayscale electron beam lithography and direct forming methodology to fabricate antimony sulfide structures with free form for the first time. The refractive index of the electron beam patterned structure was calculated based on an optimization algorithm that is combined with genetic algorithm and transfer matrix method. By adopting electron irradiation with variable doses, 4-level Fresnel Zone Plates and metalens were produced and characterized. This method can be used for the fabrication of three-dimensional diffractive optical elements and metasurfaces in a single step manner.

physics.optics↗

arXiv2022

Better than a lens -- Increasing the signal-to-noise ratio through pupil splitting

Lenses are designed to fulfill Fermats principle such that all light interferes constructively in its focus, guaranteeing its maximum concentration. It can be shown that imaging via an unmodified full pupil yields the maximum transfer strength for all spatial frequencies transferable by the system. Seemingly also the signal-to-noise ratio (SNR) is optimal. The achievable SNR at a given photon budget is critical especially if that budget is strictly limited as in the case of fluorescence microscopy. In this work we propose a general method which achieves a better SNR for high spatial frequency information of an optical imaging system, without the need to capture more photons. This is achieved by splitting the pupil of an incoherent imaging system such that two (or more) sub-images are simultaneously acquired and computationally recombined. We compare the theoretical performance of split pupil imaging to the non-split scenario and implement the splitting using a tilted elliptical mirror placed at the back-focal-plane (BFP) of a fluorescence widefield microscope.

physics.optics↗

arXiv2020

Probing ultrafast laser plasma processes inside solids with resonant small-angle X-ray scattering

Extreme states of matter exist throughout the universe e.g. inside planetary cores, stars or astrophysical jets. Such conditions are generated in the laboratory in the interaction of powerful lasers with solids, and their evolution can be probed with femtosecond precision using ultra-short X-ray pulses to study laboratory astrophysics, laser-fusion research or compact particle acceleration. X-ray scattering (SAXS) patterns and their asymmetries occurring at X-ray energies of atomic bound-bound transitions contain information on the volumetric nanoscopic distribution of density, ionization and temperature. Buried heavy ion structures in high intensity laser irradiated solids expand on the nanometer scale following heat diffusion, and are heated to more than 2 million Kelvin. These experiments demonstrate resonant SAXS with the aim to better characterize dynamic processes in extreme laboratory plasmas.

physics.plasm-ph↗

arXiv2018

Lateral heterostructures of two-dimensional materials by electron-beam induced stitching

We present a novel methodology to synthesize two-dimensional (2D) lateral heterostructures of graphene and MoS2 sheets with molecular carbon nanomembranes (CNMs), which is based on electron beam induced stitching. Monolayers of graphene and MoS2 were grown by chemical vapor deposition (CVD) on copper and SiO2 substrates, respectively, transferred onto gold/mica substrates and patterned by electron beam lithography or photolithography. Self-assembled monolayers (SAMs) of aromatic thiols were grown on the gold film in the areas where the 2D materials were not present. An irradiation with a low energy electron beam was employed to convert the SAMs into CNMs and simultaneously stitching the CNM edges to the edges of graphene and MoS2, therewith forming a heterogeneous but continuous film composed of two different materials. The formed lateral heterostructures possess a high mechanical stability, enabling their transfer from the gold substrate onto target substrates and even the preparation as freestanding sheets. We characterized the individual steps of this synthesis and the structure of the final heterostructures by complementary analytical techniques including optical microscopy, Raman spectroscopy, atomic force microscopy (AFM), helium ion microscopy (HIM), X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM) and find that they possess nearly atomically sharp boundaries.

cond-mat.mes-hall↗

arXiv2018

Observation of ultrafast solid-density plasma dynamics using femtosecond X-ray pulses from a free-electron laser

The complex physics of the interaction between short pulse high intensity lasers and solids is so far hardly accessible by experiments. As a result of missing experimental capabilities to probe the complex electron dynamics and competing instabilities, this impedes the development of compact laser-based next generation secondary radiation sources, e.g. for tumor therapy [Bulanov2002,ledingham2007], laboratory-astrophysics [Remington1999,Bulanov2015], and fusion [Tabak2014]. At present, the fundamental plasma dynamics that occur at the nanometer and femtosecond scales during the laser-solid interaction can only be elucidated by simulations. Here we show experimentally that small angle X-ray scattering of femtosecond X-ray free-electron laser pulses facilitates new capabilities for direct in-situ characterization of intense short-pulse laser plasma interaction at solid density that allows simultaneous nanometer spatial and femtosecond temporal resolution, directly verifying numerical simulations of the electron density dynamics during the short pulse high intensity laser irradiation of a solid density target. For laser-driven grating targets, we measure the solid density plasma expansion and observe the generation of a transient grating structure in front of the pre-inscribed grating, due to plasma expansion, which is an hitherto unknown effect. We expect that our results will pave the way for novel time-resolved studies, guiding the development of future laser-driven particle and photon sources from solid targets.

physics.plasm-ph↗

arXiv2012

Frequency Division Multiplexing Readout and Simultaneous Manipulation of an Array of Flux Qubits

An important desired ingredient of superconducting quantum circuits is a readout scheme whose complexity does not increase with the number of qubits involved in the measurement. Here, we present a readout scheme employing a single microwave line, which enables simultaneous readout of multiple qubits. Consequently, scaling up superconducting qubit circuits is no longer limited by the readout apparatus. Parallel readout of 6 flux qubits using a frequency division multiplexing technique is demonstrated, as well as simultaneous manipulation and time resolved measurement of 3 qubits. We discuss how this technique can be scaled up to read out hundreds of qubits on a chip.

quant-ph↗