arXiv subjects

V. -M. Pelkonen

Publications and source records attributed to V. -M. Pelkonen.

28 records · Page 2Linked to original sources

arXiv2014

Dust properties inside molecular clouds from coreshine modeling and observations

Context. Using observations to deduce dust properties, grain size distribution, and physical conditions in molecular clouds is a highly degenerate problem. Aims. The coreshine phenomenon, a scattering process at 3.6 and 4.5 $μ$m that dominates absorption, has revealed its ability to explore the densest parts of clouds. We want to use this effect to constrain the dust parameters. The goal is to investigate to what extent grain growth (at constant dust mass) inside molecular clouds is able to explain the coreshine observations. We aim to find dust models that can explain a sample of Spitzer coreshine data. We also look at the consistency with near-infrared data we obtained for a few clouds. Methods. We selected four regions with a very high occurrence of coreshine cases: Taurus-Perseus, Cepheus, Chameleon and L183/L134. We built a grid of dust models and investigated the key parameters to reproduce the general trend of surface bright- nesses and intensity ratios of both coreshine and near-infrared observations with the help of a 3D Monte-Carlo radiative transfer code. The grid parameters allow to investigate the effect of coagulation upon spherical grains up to 5 $μ$m in size derived from the DustEm diffuse interstellar medium grains. Fluffiness (porosity or fractal degree), ices, and a handful of classical grain size distributions were also tested. We used the near- and mostly mid-infrared intensity ratios as strong discriminants between dust models. Results. The determination of the background field intensity at each wavelength is a key issue. In particular, an especially strong background field explains why we do not see coreshine in the Galactic plane at 3.6 and 4.5 $μ$m. For starless cores, where detected, the observed 4.5 $μ$m / 3.6 $μ$m coreshine intensity ratio is always lower than $\sim$0.5 which is also what we find in the models for the Taurus-Perseus and L183 directions. Embedded sources can lead to higher fluxes (up to four times greater than the strongest starless core fluxes) and higher coreshine ratios (from 0.5 to 1.1 in our selected sample). Normal interstellar radiation field conditions are sufficient to find suitable grain models at all wavelengths for starless cores. The standard interstellar grains are not able to reproduce observations and, due to the multi-wavelength approach, only a few grain types meet the criteria set by the data. Porosity does not affect the flux ratios while the fractal dimension helps to explain coreshine ratios but does not seem able to reproduce near-infrared observations without a mix of other grain types. Conclusions. Combined near- and mid-infrared wavelengths confirm the potential to reveal the nature and size distribution of dust grains. Careful assessment of the environmental parameters (interstellar and background fields, embedded or nearby reddened sources) is required to validate this new diagnostic.

astro-ph.GA↗

arXiv2014

Mapping of interstellar clouds with infrared light scattered from dust: TMC-1N

Mapping of near-infrared (NIR) scattered light is a recent method for the study of interstellar clouds, complementing other, more commonly used methods, like dust emission and extinction. Our goal is to study the usability of this method on larger scale, and compare the properties of a filament using NIR scattering and other methods. We also study the radiation field and differences in grain emissivity between diffuse and dense areas. We have used scattered J, H, and K band surface brightness WFCAM-observations to map filament TMC-1N in Taurus, covering an area of 1dx1d corresponding to ~(2.44 pc)^2. We have converted the data into optical depth and compared the results with NIR extinction and Herschel observations of submm dust emission. We see the filament in scattered light in all three NIR bands. We note that our WFCAM observations in TMC-1N show notably lower intensity than previous results in Corona Australis using the same method. We show that 3D radiative transfer simulations predict similar scattered surface brightness levels as seen in the observations. However, changing the assumptions about the background can change the results of simulations notably. We derive emissivity by using optical depth in the J band as an independent tracer of column density. We obtain opacity sigma(250um) values 1.7-2.4x10^-25 cm^2/H, depending on assumptions of the extinction curve, which can change the results by over 40%. These values are twice as high as obtained for diffuse areas, at the lower limit of earlier results for denser areas. We show that NIR scattering can be a valuable tool in making high resolution maps. We conclude, however, that NIR scattering observations can be complicated, as the data can show relatively low-level artefacts. This suggests caution when planning and interpreting the observations.

astro-ph.GA↗

arXiv2014

Multiwavelength study of the high-latitude cloud L1642: chain of star formation

L1642 is one of the two high galactic latitude (|b| > 30deg) clouds confirmed to have active star formation. We examine the properties of this cloud, especially the large-scale structure, dust properties, and compact sources in different stages of star formation. We present high-resolution far-infrared and submm observations with the Herschel and AKARI satellites and mm observations with the AzTEC/ASTE telescope, which we combined with archive data from near- and mid-infrared (2MASS, WISE) to mm observations (Planck). The Herschel observations, combined with other data, show a sequence of objects from a cold clump to young stellar objects at different evolutionary stages. Source B-3 (2MASS J04351455-1414468) appears to be a YSO forming inside the L1642 cloud, instead of a foreground brown dwarf, as previously classified. Herschel data reveal striation in the diffuse dust emission around L1642. The western region shows striation towards NE and has a steeper column density gradient on its southern side. The densest central region has a bow-shock like structure showing compression from the west and a filamentary tail extending towards east. The differences suggest that these may be spatially distinct structures, aligned only in projection. We derive values of the dust emission cross-section per H nucleon for different regions of the cloud. Modified black-body fits to the spectral energy distribution of Herschel and Planck data give emissivity spectral index beta values 1.8-2.0 for the different regions. The compact sources have lower beta values and show an anticorrelation between T and beta. Markov chain Monte Carlo calculations demonstrate the strong anticorrelation between beta and T errors and the importance of mm Planck data in constraining the estimates. L1642 reveals a more complex structure and sequence of star formation than previously known.

astro-ph.GA↗

arXiv2012

A Corona Australis cloud filament seen in NIR scattered light. III. Modelling and comparison with Herschel sub-millimetre data

With recent Herschel observations, the northern filament of the Corona Australis cloud has now been mapped in a number of bands from 1.2um to 870um. The data set provides a good starting point for the study of the cloud over several orders of magnitude in density. We wish to examine the differences of the column density distributions derived from dust extinction, scattering, and emission, and to determine to what extent the observations are consistent with the standard dust models. From Herschel data, we calculate the column density distribution that is compared to the corresponding data derived in the near-infrared regime from the reddening of the background stars, and from the surface brightness attributed to light scattering. We construct three-dimensional radiative transfer models to describe the emission and the scattering. The scattered light traces low column densities of A_V~1mag better than the dust emission, remaining useful to A_V ~ 10-15 mag. Based on the models, the extinction and the level of dust emission are surprisingly consistent with a sub-millimetre dust emissivity typical of diffuse medium. However, the intensity of the scattered light is very low at the centre of the densest clump and this cannot be explained without a very low grain albedo. Both the scattered light and dust emission indicate an anisotropic radiation field. The modelling of the dust emission suggests that the radiation field intensity is at least three times the value of the normal interstellar radiation field. The inter-comparison between the extinction, light scattering, and dust emission provides very stringent constraints on the cloud structure, the illuminating radiation field, and the grain properties.

astro-ph.GA↗

arXiv2012

Galactic cold cores III. General cloud properties

We examine the cloud structure around the Planck detections in 71 fields observed with the Herschel SPIRE instrument. We wish to determine the general physical characteristics of the fields and to examine the morphology of the clouds where the cold high column density clumps are found. We derive colour temperature and column density maps of the fields. We examine the infrared spectral energy distributions of the main clumps. The clouds are categorised according to their large scale morphology. With the help of recently released WISE satellite data, we look for signs of enhanced mid-infrared scattering (coreshine), an indication of growth of the dust grains, and examine the star formation activity associated with the cold clumps. The mapped clouds have distances ranging from ~100pc to several kiloparsecs and cover a range of sizes and masses from cores of less than 10 solar masses to clouds with masses in excess of 10000 solar mass. Most fields contain some filamentary structures and in about half of the cases a filament or a few filaments dominate the morphology. In one case out of ten, the clouds show a cometary shape or have sharp boundaries indicative of compression by an external force. The width of the filaments is typically ~0.2-0.3pc. However, there is significant variation from 0.1pc to 1pc and the estimates are sensitive to the methods used and the very definition of a filament. Enhanced mid-infrared scattering, coreshine, was detected in four clouds with six additional tentative detections. The cloud LDN183 is included in our sample and remains the best example of this phenomenon. About half of the fields are associated with active star formation as indicated by the presence of mid-infrared point sources. The mid-infrared sources often coincide with structures whose sub-millimetre spectra are still dominated by the cold dust.

astro-ph.GA↗

arXiv2011

Galactic cold cores II. Herschel study of the extended dust emission around the first Planck detections

Within the project Galactic Cold Cores we are carrying out Herschel photometric observations of cold interstellar clouds detected with the Planck satellite. The three fields observed as part of the Herschel science demonstration phase (SDP) provided the first glimpse into the nature of these sources. We examine the properties of the dust emission within the fields. We determine the dust sub-millimetre opacity, look for signs of spatial variations in the dust spectral index, and estimate how the apparent variations of the parameters could be affected by different sources of uncertainty. We use the Herschel observations where the zero point of the surface brightness scale is set with the help of the Planck satellite data. We derive the colour temperature and column density maps of the regions and determine the dust opacity by a comparison with extinction measurements. By simultaneously fitting the colour temperature and the dust spectral index values we look for spatial variations in the apparent dust properties. With a simple radiative transfer model we estimate to what extent these can be explained by line-of-sight temperature variations, without changes in the dust grain properties. The analysis of the dust emission reveals cold and dense clouds that coincide with the Planck sources and confirm those detections. The derived dust opacity varies in the range kappa(250um) ~ 0.05-0.2 cm^2/g, higher values being observed preferentially in regions of high column density. The average dust spectral index beta is ~ 1.9-2.2. There are indications that beta increases towards the coldest regions. The spectral index decreases strongly near internal heating sources but, according to radiative transfer models, this can be explained by the line-of-sight temperature variations without a change in the dust properties.

astro-ph.GA↗

arXiv2009

Predictions of polarized dust emission from interstellar clouds: spatial variations in the efficiency of radiative torque alignment

Polarization carries information about the magnetic fields in interstellar clouds. The observations of polarized dust emission are used to study the role of magnetic fields in the evolution of molecular clouds and the initial phases of star-formation. We study the grain alignment with realistic simulations, assuming the radiative torques to be the main mechanism that spins the grains up. The aim is to study the efficiency of the grain alignment as a function of cloud position and to study the observable consequences of these spatial variations. Our results are based on the analysis of model clouds derived from MHD simulations. The continuum radiative transfer problem is solved with Monte Carlo methods to estimate the 3D distribution of dust emission and the radiation field strength affecting the grain alignment. We also examine the effect of grain growth in cores. We are able to reproduce the results of Cho & Lazarian using their assumptions. However, the anisotropy factor even in the 1D case is lower than their assumption of $γ= 0.7$, and thus we get less efficient radiative torques. Compared with our previous paper, the polarization degree vs. intensity relation is steeper because of less efficient grain alignment within dense cores. Without grain growth, the magnetic field of the cores is poorly recovered above a few $A_{\rm V}$. If grain size is doubled in the cores, the polarization of dust emission can trace the magnetic field lines possibly up to $A_{\rm V} \sim 10$ magnitudes. However, many of the prestellar cores may be too young for grain coagulation to play a major role. The inclusion of direction dependent radiative torque efficiency weakens the alignment. Even with doubled grain size, we would not expect to probe the magnetic field past a few magnitudes in $A_{\rm V}$.

astro-ph.GA↗

arXiv2008

A Corona Australis cloud filament seen in NIR scattered light I. Comparison with extinction of background stars

With current near-infrared (NIR) instruments the near-infrared light scattered from interstellar clouds can be mapped over large areas. The surface brightness carries information on the line-of-sight dust column density. Therefore, scattered light could provide an important tool to study mass distribution in quiescent interstellar clouds at a high, even sub-arcsecond resolution. We wish to confirm the assumption that light scattering dominates the surface brightness in all NIR bands. Furthermore, we want to show that scattered light can be used for an accurate estimation of dust column densities in clouds with Av in the range 1-15mag. We have obtained NIR images of a quiescent filament in the Corona Australis molecular cloud. The observations provide maps of diffuse surface brightness in J, H, and Ks bands. Using the assumption that signal is caused by scattered light we convert surface brightness data into a map of dust column density. The same observations provide colour excesses for a large number of background stars. These data are used to derive an extinction map of the cloud. The two, largely independent tracers of the cloud structure are compared. Results. In regions below Av=15m both diffuse surface brightness and background stars lead to similar column density estimates. The existing differences can be explained as a result of normal observational errors and bias in the sampling of extinctions provided by the background stars. There is no indication that thermal dust emission would have a significant contribution even in the Ks band. The results show that, below Av=15mag, scattered light does provide a reliable way to map cloud structure. Compared with the use of background stars it can also in practice provide a significantly higher spatial resolution.

astro-ph↗

arXiv2006

Simulations of polarized dust emission

Our aim is to study the polarization of thermal dust emission to see if the alignment of grain by radiative torques could explain the observed relation between the degree of polarization and the intensity in dense cores. Predictions are made for polarimetry observations with the Planck satellite. Our results are based on model clouds derived from MHD simulations of magnetized turbulent flows, while the continuum radiative transfer problem is solved with Monte Carlo methods in order to estimate the three-dimensional distribution of dust emission and the radiation field strength affecting the grain alignment. The influence of grain alignment efficiency is examined in the calculated polarization maps. We are able to reproduce the P/I-relation with the grain alignment by radiative torques. The decrease in intrinsic polarization and total emission means that sub-mm polarimetry carries only little information about the magnetic fields in dense cores with high visual extinction. The interpretation of the observations will be further complicated by the unknown magnetic field geometry and the fact that what is observed as individual cores may, in fact, be a superposition of several density enhancements. According to our calculations, Planck will be able to map dust polarization reliably when A_V > 2 mag at spatial resolution of 15'.

astro-ph↗

arXiv2006

High-resolution mapping of interstellar clouds with near-infrared scattered light

With current wide-field near-infrared (NIR) instruments the scattered light in the near-infrared can be mapped over large areas. Below A_V ~ 10 the surface brightness is directly proportional to the column density, and at slightly higher column densities the saturation of the intensity values can be corrected using the ratios of the intensity in different NIR bands. NIR scattered light provides a promising new method for the mapping of quiescent interstellar clouds. We develop a method to convert the observed near-infrared surface brightness into estimates of the column density. We study and quantify the effect that different error sources could have on the accuracy of such estimates. We also propose to reduce systematic errors by combining surface brightness data with extinction measurements derived from the near-infrared colour excess of background stars. Our study is based on a set of three-dimensional magnetohydrodynamic turbulence simulations. Maps of near-infrared scattered light are obtained with radiative transfer calculations, and the maps are converted back into column density estimates using the proposed method. The results are compared with the true column densities. Extinction measurements are simulated using the same turbulence simulations, and are used as a complementary column density tracer. We find that NIR intensities can be converted into a reliable estimate of the column density in regions with A_V up to almost 20mag.

astro-ph↗