arXiv subjects

V. Andretta

Publications and source records attributed to V. Andretta.

At least 19 recordsLinked to original sources

arXiv2026

A view of the evolution of a CME and the associated wave-trains at high spatial and temporal resolution

Context. Studying the kinematic and dynamic evolution of fast eruptive events from the middle to high solar corona is a primary objective of the Metis coronagraph on Solar Orbiter. During perihelion, Metis acquires visible light images at a 20s cadence, reaching a spatial resolution of around 2000 km at 0.28 au. This enables capturing coronal mass ejections (CMEs) and transient structures with unprecedented spatial and temporal resolution. Aims. On October 8-9, 2022, an extensive CME was observed by Metis at 0.3 au (resolution: 4.4 $10^{3}$ km/pixel). We aim to exploit this high resolution to resolve multiple substructures within the CME front, revealing plasma elements with distinct trajectories and speeds to provide a detailed kinematic characterization of the eruption. Methods. A normalization-based running difference algorithm was applied to enhance the complex morphology. Height-time diagrams were used to estimate propagation speeds and frequency variations. A 3D flux rope reconstruction, combined with multi-spacecraft coronagraphs and disk imagers, enabled tracking the CME from its initiation in the lower corona to approximately 5 solar radii. Joint observations with Solar Orbiter EUI-FSI provided insights into the eruption's onset, while Metis captured its development into the middle corona. Results. Metis observations resolve the CME's fine structure and internal plasma motions. The detection of circular, fast-propagating wavefronts (500 km/s, 3 minute period) at the western flank suggests wave excitation and magnetic reconfiguration processes. Multiple interpretations are proposed for these coronal wave trains, including quasi periodic propagating fast modes, offering new insights into wave generation and energy transport in the solar corona.

astro-ph.SR↗

arXiv2025

Velocity field of an Active Region filament from GRIS IR He I and IRIS UV observations

Plasma flow measurements in solar active region filaments are rare, particularly in the infrared and ultraviolet ranges that probe the chromosphere and transition region. In addition, previous studies generally focused on prominences and filaments near the solar limb. This study presents a multi-wavelength, multi-instrument analysis of an active region filament observed on the solar disk on November 9 and 10, 2020. Our goal is to characterize the plasma flows in the filament using spectroscopic measurements in both the infrared and ultraviolet spectral ranges. This is important for understanding the mechanisms for filament support, mass loading, and energy balance. Furthermore, this also offers observational benchmarks for filament modeling and simulations. Spectra from the IRIS satellite, including the Mg II k, C II and Si IV lines were analyzed alongside ground-based observations from the GREGOR Infrared Spectrograph and High-resolution Fast Imager instruments whose observed spectral ranges include the chromospheric He I and H{\alpha} lines. Persistent blueshifts were measured within the filament structure in both spectral ranges. These can be interpreted as upflow velocities ranging from 0.5 to 15 km s^-1, with the Si IV showing the highest values. Red shifted emission in the He I and Mg II k3 at the footpoints of a newly formed dark bundle suggest chromospheric downflows, likely due to spatial overlap between an arch filament system close to the filament footpoints. The weak redshifted signal in the Si IV emission may suggest confinement to lower atmospheric layers. The observed velocity patterns provide, for the first time, a comprehensive and coherent view of the plasma dynamics from the chromosphere to the transition region, illustrating that the filament emission is consistently blueshifted in all the spectral windows, and thus in different temperature regimes.

astro-ph.SR↗

arXiv2025

First detection of acoustic-like flux in the middle solar corona

Waves are thought to play a significant role in the heating of the solar atmosphere and the acceleration of the wind. Among the many types of waves observed in the Sun, the so-called p-modes with a 3 mHz frequency peak dominate the lower atmosphere. In the presence of magnetic fields, these waves can be converted into magnetohydrodynamic modes, which then leak into the corona through magnetic conduits. High-resolution off-limb observations have indeed revealed signatures of ubiquitous and global 3 mHz oscillations in the corona, although limited to low heights and to incompressible modes. We present high-cadence, high-resolution observations of the corona in the range 1.7 - 3.6 solar radii taken in broad-band 580-640 nm visible light by the Metis coronagraph aboard Solar Orbiter. These observations were designed to investigate density fluctuations in the middle corona. The data were acquired over several days in March 2022, October 2022, and for two days in April 2023. We selected representative regions of the corona on three sample dates. Analysis of the data in those regions revealed the presence of periodic density fluctuations. By examining several time-distance diagrams, we determined the main properties (apparent propagation speed, amplitude) of those fluctuations. We also show power spectra in selected locations in order to determine the dominant frequencies. We found wave-like, compressible fluctuations of low amplitude - of the order of 0.1 % of the background - in several large-scale regions in the corona at least up to 2.5 solar radii. We also found that the apparent propagation speeds of these perturbations typically fall in the range 150 - 450 km/s. A power spectrum analysis of time series revealed an excess power in the range 2-7 mHz, often with peaks at 3 or 5 mHz, i.e. in a range consistent with p-mode frequencies of the lower solar atmosphere.

astro-ph.SR↗

arXiv2025

Metis Observations of Alfv\'{e}nic Outflows Driven by Interchange Reconnection in a Pseudostreamer

This study presents observations of a large pseudostreamer solar eruption and, in particular, the post-eruption relaxation phase, as captured by Metis onboard the Solar Orbiter on October 12, 2022, during its perihelion passage. Utilizing total brightness data, we observe the outward propagation of helical features up to 3 solar radii along a radial column that appears to correspond to the stalk of the pseudostreamer. The helical structures persisted for more than 3 hours following a jet-like coronal mass ejection associated with a polar crown prominence eruption. A notable trend is revealed: the inclination of these features decreases as their polar angle and height increase. Additionally, we measured their helix pitch. Despite a 2-minute time cadence limiting direct correspondence among filamentary structures in consecutive frames, we find that the Metis helical structure may be interpreted as a consequence of twist (nonlinear torsional Alfv\'{e}n waves) and plasma liberated by interchange reconnection. A comparison was performed of the helix parameters as outlined by fine-scale outflow features with those obtained from synthetic white-light images derived from the high-resolution magnetohydrodynamics simulation of interchange reconnection in a pseudostreamer topology by Wyper et al. (2022). A remarkable similarity between the simulation-derived images and the observations was found. We conjecture that these Metis observations may represent the upper end in spatial and energy scale of the interchange reconnection process that has been proposed recently as the origin of the Alfv\'{e}nic solar wind.

astro-ph.SR↗

arXiv2023

Eruptive events with exceptionally bright emission in HI Ly-alpha observed by the Metis coronagraph

Metis, the coronagraph on board Solar Orbiter, provides for the first time coronagraphic imaging in the ultraviolet HI Ly-alpha line and, simultaneously, in polarized visible light, thus providing a host of information on the properties of CMEs and solar eruptions like their overall dynamics, time evolution, mass content, and outflow propagation velocity in the expanding corona. We analyzed in this work six CMEs observed by Metis between April and October 2021, which are characterized by a very strong HI Ly-alpha emission. We studied in particular the morphology, kinematics, and the temporal and radial evolution of the emission of such events, focusing on the brightest UV features. The kinematics of the eruptive events under consideration were studied by determining the height-time profiles of the brightest parts on the Metis plane of the sky. Furthermore, the 3D position in the heliosphere of the CMEs were determined by employing co-temporal images from two other coronagraphs: LASCO/C2 onboard SOHO, and COR2 onboard STEREO-A. Finally, the radiometrically calibrated Metis images of the bright UV features were analyzed to provide estimates of their volume and density. From the kinematics and radiometric analyses, we obtained indications of the temperatures of the bright UV cores of these events. The analysis of these strong UV-emitting features associated with coronal mass ejections demonstrates the capabilities of the current constellation of space coronagraphs, Metis, LASCO/C2, and COR2, in providing a complete characterization of the structure and dynamics of eruptive events in their propagation phase from their inception up to several solar radii. Furthermore, we show how the unique capabilities of the Metis instrument to observe these events in both HI Ly-alpha line and polarized VL radiation allow plasma diagnostics on the thermal state of these events.

astro-ph.SR↗

arXiv2023

Slow wind belt in the quiet solar corona

The slow solar wind belt in the quiet corona, observed with the Metis coronagraph on board Solar Orbiter on May 15, 2020, during the activity minimum of the cycle 24, in a field of view extending from 3.8 $R_\odot$ to 7.0 $R_\odot$, is formed by a slow and dense wind stream running along the coronal current sheet, accelerating in the radial direction and reaching at 6.8 $R_\odot$ a speed within 150 km s$^{-1}$ and 190 km s$^{-1}$, depending on the assumptions on the velocity distribution of the neutral hydrogen atoms in the coronal plasma. The slow stream is separated by thin regions of high velocity shear from faster streams, almost symmetric relative to the current sheet, with peak velocity within 175 km s$^{-1}$ and 230 km s$^{-1}$ at the same coronal level. The density-velocity structure of the slow wind zone is discussed in terms of the expansion factor of the open magnetic field lines that is known to be related to the speed of the quasi-steady solar wind, and in relation to the presence of a web of quasi separatrix layers, S-web, the potential sites of reconnection that release coronal plasma into the wind. The parameters characterizing the coronal magnetic field lines are derived from 3D MHD model calculations. The S-web is found to coincide with the latitudinal region where the slow wind is observed in the outer corona and is surrounded by thin layers of open field lines expanding in a non-monotonic way.

astro-ph.SR↗

arXiv2023

In-flight validation of Metis Visible-light Polarimeter Coronagraph on board Solar Orbiter

Context. The Metis coronagraph is one of the remote-sensing instruments of the ESA/NASA Solar Orbiter mission. Metis is aimed at the study of the solar atmosphere and solar wind by simultaneously acquiring images of the solar corona at two different wavelengths; visible-light (VL) within a band ranging from 580 nm to 640 nm, and in the HI Ly-alpha 121.6 +/- 10 nm ultraviolet (UV) light. The visible-light channel includes a polarimeter with electro-optically modulating Liquid Crystal Variable Retarders (LCVRs) to measure the linearly polarized brightness of the K-corona to derive the electron density. Aims. In this paper, we present the first in-flight validation results of the Metis polarimetric channel together with a comparison to the on-ground calibrations. It is the validation of the first use in deep space (with hard radiation environment) of an electro-optical device: a liquid crystal-based polarimeter. Methods. We used the orientation of the K-corona's linear polarization vector during the spacecraft roll maneuvers for the in-flight calibration. Results. The first in-flight validation of the Metis coronagraph on-board Solar Orbiter shows a good agreement with the on-ground measurements. It confirms the expected visible-light channel polarimetric performance. A final comparison between the first pB obtained by Metis with the polarized brightness (pB) obtained by the space-based coronagraph LASCO and the ground-based coronagraph KCor shows the consistency of the Metis calibrated results.

astro-ph.SR↗

arXiv2022

Gaia Data Release 3. Stellar chromospheric activity and mass accretion from Ca II IRT observed by the Radial Velocity Spectrometer

The Gaia Radial Velocity Spectrometer provides the unique opportunity of a spectroscopic analysis of millions of stars at medium-resolution in the near-infrared. This wavelength range includes the Ca II infrared triplet (IRT), which is a good diagnostics of magnetic activity in the chromosphere of late-type stars. Here we present the method devised for inferring the Gaia stellar activity index together with its scientific validation. A sample of well studied PMS stars is considered to identify the regime in which the Gaia stellar activity index may be affected by mass accretion. The position of these stars in the colour-magnitude diagram and the correlation with the amplitude of the photometric rotational modulation is also scrutinised. Three regimes of the chromospheric stellar activity are identified, confirming suggestions made by previous authors on much smaller $R'_{\rm HK}$ datasets. The highest stellar activity regime is associated with PMS stars and RS CVn systems, in which activity is enhanced by tidal interaction. Some evidence of a bimodal distribution in MS stars with $T_{\rm eff}\ge$ 5000 K is also found, which defines the two other regimes, without a clear gap in between. Stars with 3500 K$\le T_{\rm eff} \le$ 5000 K are found to be either very active PMS stars or active MS stars with a unimodal distribution in chromospheric activity. A dramatic change in the activity distribution is found for $T_{\rm eff}\le$3500 K, with a dominance of low activity stars close to the transition between partially- and fully-convective stars and a rise in activity down into the fully-convective regime.

astro-ph.SR↗

arXiv2022

Prominence eruption observed in He II 304 {\AA} up to $>6 R_\sun$ by EUI/FSI aboard Solar Orbiter

We report observations of a unique, large prominence eruption that was observed in the He II 304 {\AA} passband of the the Extreme Ultraviolet Imager/Full Sun Imager telescope aboard Solar Orbiter on 15-16 February 2022. Observations from several vantage points (Solar Orbiter, the Solar-Terrestrial Relations Observatory, the Solar and Heliospheric Observatory, and Earth-orbiting satellites) were used to measure the kinematics of the erupting prominence and the associated coronal mass ejection. Three-dimensional reconstruction was used to calculate the deprojected positions and speeds of different parts of the prominence. Observations in several passbands allowed us to analyse the radiative properties of the erupting prominence. The leading parts of the erupting prominence and the leading edge of the corresponding coronal mass ejection propagate at speeds of around 1700 km/s and 2200 km/s, respectively, while the trailing parts of the prominence are significantly slower (around 500 km/s). Parts of the prominence are tracked up to heights of over $6 R_\sun$. The He II emission is probably produced via collisional excitation rather than scattering. Surprisingly, the brightness of a trailing feature increases with height. The reported prominence is the first observed in He II 304 {\AA} emission at such a great height (above 6 $R_\sun$).

astro-ph.SR↗

arXiv2022

A Coronal Mass Ejection followed by a prominence eruption and a plasma blob as observed by Solar Orbiter

On February 12, 2021 two subsequent eruptions occurred above the West limb, as seen along the Sun-Earth line. The first event was a typical slow Coronal Mass Ejection (CME), followed $\sim 7$ hours later by a smaller and collimated prominence eruption, originating Southward with respect to the CME, followed by a plasma blob. These events were observed not only by SOHO and STEREO-A missions, but also by the suite of remote sensing instruments on-board Solar Orbiter (SolO). This work shows how data acquired by the Full Sun Imager (FSI), Metis coronagraph, and Heliospheric Imager (SoloHI) from the SolO perspective can be combined to study the eruptions and the different source regions. Moreover, we show how Metis data can be analyzed to provide new information about solar eruptions. Different 3D reconstruction methods were applied to the data acquired by different spacecraft including remote sensing instruments on-board SolO. Images acquired by both Metis channels in the Visible Light (VL) and H I Lyman$-\alpha$ line (UV) were combined to derive physical information on the expanding plasma. The polarization ratio technique was also applied for the first time to the Metis images acquired in the VL channel. The two eruptions were followed in 3D from their source region to their expansion in the intermediate corona. Thanks to the combination of VL and UV Metis data, the formation of a post-CME Current Sheet (CS) was followed for the first time in the intermediate corona. The plasma temperature gradient across a post-CME blob propagating along the CS was also measured for the first time. Application of the polarization ratio technique to Metis data shows that, thanks to the combination of four different polarization measurements, the errors are reduced by $\sim 5-7$\%, thus better constraining the 3D distribution of plasma.

astro-ph.SR↗

arXiv2021

Effects of the chromospheric Ly{\alpha} line profile shape on the determination of the solar wind HI outflow velocity using the Doppler dimming technique

The determination of solar wind outflow velocity is fundamental in order to probe the mechanisms of wind acceleration in the corona. We aim to study, via the Doppler dimming technique, the effects that the chromospheric Ly{\alpha} line profile shape causes on the determination of the outflow speed of coronal HI atoms. The Doppler dimming technique takes into account the decrease of coronal Ly{\alpha} radiation in regions where HI atoms flow out in the solar wind. Starting from UV observations (UVCS/SOHO) of the coronal Ly{\alpha} line and simultaneous measurements of pB (LASCO/SOHO and Mk3/MLSO), we studied the effect of the pumping chromospheric Ly{\alpha} line profile through measurements from SOHO/SUMER, UVSP/SMM and LPSP/OSO-8, taken from representative on-disk regions and as a function of time during the solar activity cycle. In particular, we considered the effect of four chromospheric line parameters: line width, depth of the central reversal, asymmetry and distance of the peaks. We find that the range of variability of these parameters is of about 50% for the width, 69% for the depth of the central reversal, 35% for the asymmetry, and 50% for the distance of the peaks. Then, we find that the variability of the pumping Ly{\alpha} profile affects the estimates of the coronal HI velocity by about 9-12%. Therefore, this uncertainty is smaller than other physical quantities uncertainties, and a constant in time and unique shape of the Ly{\alpha} profile over the solar disk can be adopted in order to estimate the solar wind outflow velocity.

astro-ph.SR↗

arXiv2021

First light observations of the solar wind in the outer corona with the Metis coronagraph

The investigation of the wind in the solar corona initiated with the observations of the resonantly scattered UV emission of the coronal plasma obtained with UVCS-SOHO, designed to measure the wind outflow speed by applying the Doppler dimming diagnostics. Metis on Solar Orbiter complements the UVCS spectroscopic observations, performed during solar activity cycle 23, by simultaneously imaging the polarized visible light and the HI Ly-alpha corona in order to obtain high-spatial and temporal resolution maps of the outward velocity of the continuously expanding solar atmosphere. The Metis observations, on May 15, 2020, provide the first HI Ly-alpha images of the extended corona and the first instantaneous map of the speed of the coronal plasma outflows during the minimum of solar activity and allow us to identify the layer where the slow wind flow is observed. The polarized visible light (580-640 nm), and the UV HI Ly-alpha (121.6 nm) coronal emissions, obtained with the two Metis channels, are combined in order to measure the dimming of the UV emission relative to a static corona. This effect is caused by the outward motion of the coronal plasma along the direction of incidence of the chromospheric photons on the coronal neutral hydrogen. The plasma outflow velocity is then derived as a function of the measured Doppler dimming. The static corona UV emission is simulated on the basis of the plasma electron density inferred from the polarized visible light. This study leads to the identification, in the velocity maps of the solar corona, of the high-density layer about +/-10 deg wide, centered on the extension of a quiet equatorial streamer present at the East limb where the slowest wind flows at about (160 +/- 18) km/s from 4 Rs to 6 Rs. Beyond the boundaries of the high-density layer, the wind velocity rapidly increases, marking the transition between slow and fast wind in the corona.

astro-ph.SR↗

arXiv2021

Cosmic-ray flux predictions and observations for and with Metis on board Solar Orbiter

The Metis coronagraph is one of the remote sensing instruments hosted on board the ESA/NASA Solar Orbiter mission. Metis is devoted to carry out the first simultaneous imaging of the solar corona in both visible light (VL) and ultraviolet (UV). High-energy particles penetrate spacecraft materials and may limit the performance of on-board instruments. A study of galactic cosmic-ray (GCR) tracks observed in the first VL images gathered by Metis during the commissioning phase for a total of 60 seconds of exposure time is presented here. A similar analysis is planned for the UV channel. A prediction of the GCR flux up to hundreds of GeV is made here for the first part of the Solar Orbiter mission to study the Metis coronagraph performance. GCR model predictions are compared to observations gathered on board Solar Orbiter by the EPD/HET experiment in the range 10 MeV-100 MeV in the summer 2020 and with previous measurements. Estimated cosmic-ray fluxes above 70 MeV n$^{-1}$ have been also parameterized and used for Monte Carlo simulations aiming at reproducing the cosmic-ray track observations in the Metis coronagraph VL images. The same parameterizations can also be used to study the performance of other detectors. By comparing observations of cosmic-ray tracks in the Metis VL images with FLUKA Monte Carlo simulations of cosmic-ray interactions in the VL detector, it is found that cosmic rays fire a fraction of the order of 10$^{-4}$ of the whole image pixel sample. Therefore, cosmic rays do not affect sensibly the quality of Metis VL images. It is also found that the overall efficiency for cosmic-ray identification in the Metis VL images is approximately equal to the contribution of Z$>$2 particles. As a result, the Metis coronagraph may play the role of a proton monitor for long-term GCR variations during the overall mission duration.

astro-ph.IM↗

arXiv2021

High resolution soft X-ray spectroscopy and the quest for the hot (5-10 MK) plasma in solar active regions

We discuss the diagnostics available to study the 5-10 MK plasma in the solar corona, which is key to understanding the heating in the cores of solar active regions. We present several simulated spectra, and show that excellent diagnostics are available in the soft X-rays, around 100 Angstroms, as six ionisation stages of Fe can simultaneously be observed, and electron densities derived, within a narrow spectral region. As this spectral range is almost unexplored, we present an analysis of available and simulated spectra, to compare the hot emission with the cooler component. We adopt recently designed multilayers to present estimates of count rates in the hot lines, with a baseline spectrometer design. Excellent count rates are found, opening up the exciting opportunity to obtain high-resolution spectroscopy of hot plasma.

astro-ph.SR↗

arXiv2021

Magnetic Imaging of the Outer Solar Atmosphere (MImOSA): Unlocking the driver of the dynamics in the upper solar atmosphere

The magnetic activity of the Sun directly impacts the Earth and human life. Likewise, other stars will have an impact on the habitability of planets orbiting these host stars. The lack of information on the magnetic field in the higher atmospheric layers hampers our progress in understanding solar magnetic activity. Overcoming this limitation would allow us to address four paramount long-standing questions: (1) How does the magnetic field couple the different layers of the atmosphere, and how does it transport energy? (2) How does the magnetic field structure, drive and interact with the plasma in the chromosphere and upper atmosphere? (3) How does the magnetic field destabilise the outer solar atmosphere and thus affect the interplanetary environment? (4) How do magnetic processes accelerate particles to high energies? New ground-breaking observations are needed to address these science questions. We suggest a suite of three instruments that far exceed current capabilities in terms of spatial resolution, light-gathering power, and polarimetric performance: (a) A large-aperture UV-to-IR telescope of the 1-3 m class aimed mainly to measure the magnetic field in the chromosphere by combining high spatial resolution and high sensitivity. (b) An extreme-UV-to-IR coronagraph that is designed to measure the large-scale magnetic field in the corona with an aperture of about 40 cm. (c) An extreme-UV imaging polarimeter based on a 30 cm telescope that combines high throughput in the extreme UV with polarimetry to connect the magnetic measurements of the other two instruments. This mission to measure the magnetic field will unlock the driver of the dynamics in the outer solar atmosphere and thereby greatly advance our understanding of the Sun and the heliosphere.

astro-ph.SR↗

arXiv2020

The Solar Orbiter Science Activity Plan: translating solar and heliospheric physics questions into action

Solar Orbiter is the first space mission observing the solar plasma both in situ and remotely, from a close distance, in and out of the ecliptic. The ultimate goal is to understand how the Sun produces and controls the heliosphere, filling the Solar System and driving the planetary environments. With six remote-sensing and four in-situ instrument suites, the coordination and planning of the operations are essential to address the following four top-level science questions: (1) What drives the solar wind and where does the coronal magnetic field originate? (2) How do solar transients drive heliospheric variability? (3) How do solar eruptions produce energetic particle radiation that fills the heliosphere? (4) How does the solar dynamo work and drive connections between the Sun and the heliosphere? Maximising the mission's science return requires considering the characteristics of each orbit, including the relative position of the spacecraft to Earth (affecting downlink rates), trajectory events (such as gravitational assist manoeuvres), and the phase of the solar activity cycle. Furthermore, since each orbit's science telemetry will be downloaded over the course of the following orbit, science operations must be planned at mission level, rather than at the level of individual orbits. It is important to explore the way in which those science questions are translated into an actual plan of observations that fits into the mission, thus ensuring that no opportunities are missed. First, the overarching goals are broken down into specific, answerable questions along with the required observations and the so-called Science Activity Plan (SAP) is developed to achieve this. The SAP groups objectives that require similar observations into Solar Orbiter Observing Plans (SOOPs), resulting in a strategic, top-level view of the optimal opportunities for science observations during the mission lifetime.

astro-ph.SR↗

arXiv2020

Helium line emissivities in the solar corona

We present new collisional-radiative models (CRMs) for helium in the quiescent solar corona, and predict the emissivities of the He and He$^+$ lines to be observed by DKIST, Solar Orbiter, and Proba-3. We discuss in detail the rates we selected for these models, highlighting several shortcomings we have found in previous work. As no previous complete and self-consistent coronal CRM for helium existed, we have benchmarked our largest model at a density of 10$^{6}$ cm$^{-3}$ and temperature of 20,000 K against recent CRMs developed for photoionised nebulae. We then present results for the outer solar corona, using new dielectronic recombination rates we have calculated, which increase the abundance of neutral helium by about a factor of two. We also find that all the optical triplet He I lines, and in particular the well known He I 10830 and 5876 A lines are strongly affected by both photo-excitation and photo-ionisation from the disk radiation, and that extensive CRM models are required to obtain correct estimates. Close to the Sun, at an electron density of 10$^{8}$ cm$^{-3}$ and temperature of 1 MK, we predict the emissivity of the He I 10830 A to be comparable to that of the strong Fe XIII coronal line at 10798 A. However, we expect the He I emissivity to sharply fall in the outer corona, with respect to Fe XIII. We confirm that the He$^+$ Lyman $\alpha$ at 304 A is also significantly affected by photo-excitation and is expected to be detectable as a strong coronal line up to several solar radii.

physics.atom-ph↗

arXiv2020

The GAPS programme at TNG XXII. The GIARPS view of the extended helium atmosphere of HD189733 b accounting for stellar activity

Exoplanets orbiting very close to their host star are strongly irradiated. This can lead the upper atmospheric layers to expand and evaporate into space. The metastable helium (HeI) triplet at 1083.3nm has recently been shown to be a powerful diagnostic to probe extended and escaping exoplanetary atmosphere. We perform high-resolution transmission spectroscopy of the transiting hot Jupiter HD189733b with the GIARPS (GIANO-B + HARPS-N) observing mode of the Telescopio Nazionale Galileo, taking advantage of the simultaneous optical+near infrared spectral coverage to detect HeI in the planet's extended atmosphere and to gauge the impact of stellar magnetic activity on the planetary absorption signal. Observations were performed during five transit events of HD189733b. By comparison of the in- and out-of-transit GIANO-B observations we compute high-resolution transmission spectra, on which we perform equivalent width measurements and light-curves analyses to gauge the excess in-transit absorption in the HeI triplet. We detect an absorption signal during all five transits. The mean in-transit absorption depth amounts to 0.75+/-0.03%. We detect night-to-night variations in the HeI absorption signal likely due to the transit events occurring in presence of stellar surface inhomogeneities. We evaluate the impact of stellar-activity pseudo-signals on the true planetary absorption using a comparative analysis of the HeI and the H$\alpha$ lines. We interpret the time-series of the HeI absorption lines in the three nights not affected by stellar contamination -exhibiting a mean in-transit absorption depth of 0.77+/-0.04%- using a 3-d atmospheric code. Our simulations suggest that the helium layers only fill part of the Roche lobe. Observations can be explained with a thermosphere heated to $\sim$12000 K, expanding up to $\sim$1.2 planetary radii, and losing $\sim$1 g/s of metastable helium.

astro-ph.EP↗