arXiv subjects

V. Bonvin

Publications and source records attributed to V. Bonvin.

At least 19 recordsLinked to original sources

arXiv2023

Hot Exoplanet Atmospheres Resolved with Transit Spectroscopy (HEARTS) VIII. Nondetection of sodium in the atmosphere of the aligned planet KELT-10b

We searched for potential atmospheric species in KELT-10b, focusing on sodium doublet lines (Na i; 589 nm) and the Balmer alpha line (H $\alpha$; 656 nm) in the transmission spectrum. Furthermore, we measured the planet-orbital alignment with the spin of its host star. We used the Rossiter-McLaughlin Revolutions technique to analyze the local stellar lines occulted by the planet during its transit. We used the standard transmission spectroscopy method to probe the planetary atmosphere, including the correction for telluric lines and the Rossiter-McLaughlin effect on the spectra. We analyzed two new light curves jointly with the public photometry observations. We do not detect signals in the Na i and H $\alpha$ lines within the uncertainty of our measurements. We derive the 3-sigma upper limit of excess absorption due to the planetary atmosphere corresponding to equivalent height Rp to 1.8Rp (Na i) and 1.9Rp (H $\alpha$). The analysis of the Rossiter-McLaughlin effect yields the sky-projected spin-orbit angle of the system $\lambda$ = -5.2 $\pm$ 3.4 and the stellar projected equatorial velocity $v_{eq} \sin{i_\star}$ = 2.58 $\pm$ 0.12 km/s. Photometry results are compatible within 1 -sigma with previous studies. We found no evidence of Na i and H $\alpha$, within the precision of our data, in the atmosphere of KELT-10b. Our detection limits allow us to rule out the presence of neutral sodium or excited hydrogen in an escaping extended atmosphere around KELT-10b. We cannot confirm the previous detection of Na i at lower altitudes with VLT/UVES. We note, however, that the Rossiter-McLaughlin effect impacts the transmission spectrum on a smaller scale than the previous detection with UVES. Analysis of the planet-occulted stellar lines shows the sky-projected alignment of the system, which is likely truly aligned due to tidal interactions of the planet with its cool (Teff < 6250 K) host star.

astro-ph.EP↗

arXiv2021

Constraining quasar structure using high-frequency microlensing variations and continuum reverberation

Gravitational microlensing is a powerful tool to probe the inner structure of strongly lensed quasars and to constrain parameters of the stellar mass function of lens galaxies. This is done by analysing microlensing light curves between the multiple images of strongly lensed quasars, under the influence of three main variable components: 1- the continuum flux of the source, 2- microlensing by stars in the lens galaxy and 3- reverberation of the continuum by the Broad Line Region (BLR). The latter, ignored by state-of-the-art microlensing techniques, can introduce high-frequency variations which we show carry information on the BLR size. We present a new method which includes all these components simultaneously and fits the power spectrum of the data in the Fourier space, rather than the observed light curve itself. In this new framework, we analyse COSMOGRAIL light curves of the two-image system QJ0158-4325 known to display high-frequency variations. Using exclusively the low frequency part of the power spectrum our constraint on the accretion disk radius agrees with the thin disk model estimate and previous work that fit the microlensing light curves in real space. However, if we also take into account the high-frequency variations, the data favour significantly smaller disk sizes than previous microlensing measurements. In this case, our results are in agreement with the thin disk model prediction only if we assume very low mean masses for the microlens population, i.e. = 0.01 $M_\odot$. Eventually, including the differentially microlensed continuum reverberation by the BLR successfully explains the high frequencies without requiring such low mass microlenses. This allows us to measure, for the first time, the size of the BLR using single-band photometric monitoring, $R_{BLR}$ = $1.6^{+1.5}_{-0.8}\times 10^{17}$cm, in agreement with estimates using the BLR size-luminosity relation.

astro-ph.GA↗

arXiv2021

HOLISMOKES -- VII. Time-delay measurement of strongly lensed Type Ia supernovae using machine learning

The Hubble constant ($H_0$) is one of the fundamental parameters in cosmology, but there is a heated debate around the $>$4$\sigma$ tension between the local Cepheid distance ladder and the early Universe measurements. Strongly lensed Type Ia supernovae (LSNe Ia) are an independent and direct way to measure $H_0$, where a time-delay measurement between the multiple supernova (SN) images is required. In this work, we present two machine learning approaches for measuring time delays in LSNe Ia, namely, a fully connected neural network (FCNN) and a random forest (RF). For the training of the FCNN and the RF, we simulate mock LSNe Ia from theoretical SN Ia models that include observational noise and microlensing. We test the generalizability of the machine learning models by using a final test set based on empirical LSN Ia light curves not used in the training process, and we find that only the RF provides a low enough bias to achieve precision cosmology; as such, RF is therefore preferred over our FCNN approach for applications to real systems. For the RF with single-band photometry in the $i$ band, we obtain an accuracy better than 1\% in all investigated cases for time delays longer than 15 days, assuming follow-up observations with a 5$\sigma$ point-source depth of 24.7, a two day cadence with a few random gaps, and a detection of the LSNe Ia 8 to 10 days before peak in the observer frame. In terms of precision, we can achieve an approximately 1.5-day uncertainty for a typical source redshift of $\sim$0.8 on the $i$ band under the same assumptions. To improve the measurement, we find that using three bands, where we train a RF for each band separately and combine them afterward, helps to reduce the uncertainty to $\sim$1.0 day. We have publicly released the microlensed spectra and light curves used in this work.

astro-ph.CO↗

arXiv2020

HOLISMOKES -- I. Highly Optimised Lensing Investigations of Supernovae, Microlensing Objects, and Kinematics of Ellipticals and Spirals

We present the HOLISMOKES programme on strong gravitational lensing of supernovae as a probe of supernova (SN) physics and cosmology. We investigate the effects of microlensing on early-phase SN Ia spectra using four different SN explosion models, and find that within 10 rest-frame days after SN explosion, distortions of SN Ia spectra due to microlensing are typically negligible ($<$1% distortion within the 1$σ$ spread, and $\lesssim$10% distortion within the 2$σ$ spread). This shows great prospects of using lensed SNe Ia to obtain intrinsic early-phase SN spectra for deciphering SN Ia progenitors. As a demonstration of the usefulness of lensed SNe Ia for cosmology, we simulate a sample of mock lensed SN Ia systems that are expected to have accurate and precise time-delay measurements in the era of the Rubin Observatory Legacy Survey of Space and Time (LSST). Adopting realistic yet conservative uncertainties on their time-delay distances and lens angular diameter distances (of 6.6% and 5%, respectively), we find that a sample of 20 lensed SNe Ia would allow a constraint on the Hubble constant ($H_0$) with 1.3% uncertainty in the flat $Λ$CDM cosmology. We find a similar constraint on $H_0$ in an open $Λ$CDM cosmology, while the constraint degrades to $3\%$ in a flat $w$CDM cosmology. We anticipate lensed SNe to be an independent and powerful probe of SN physics and cosmology in the upcoming LSST era.

astro-ph.CO↗

arXiv2020

TDCOSMO II: 6 new time delays in lensed quasars from high-cadence monitoring at the MPIA 2.2m telescope

We present six new time-delay measurements obtained from $R_c$-band monitoring data acquired at the Max Planck Institute for Astrophysics (MPIA) 2.2 m telescope at La Silla observatory between October 2016 and February 2020. The lensed quasars HE 0047-1756, WG 0214-2105, DES 0407-5006, 2M 1134-2103, PSJ 1606-2333 and DES 2325-5229 were observed almost daily at high signal-to-noise ratio to obtain high-quality light curves where we can record fast and small-amplitude variations of the quasars. We measured time delays between all pairs of multiple images with only one or two seasons of monitoring with the exception of the time delays relative to image D of PSJ 1606-2333. The most precise estimate was obtained for the delay between image A and image B of DES 0407-5006, where $τ_{AB} = -128.4^{+3.5}_{-3.8}$ d (2.8% precision) including systematics due to extrinsic variability in the light curves. For HE 0047-1756, we combined our high-cadence data with measurements from decade-long light curves from previous COSMOGRAIL campaigns, and reach a precision of 0.9 d on the final measurement. The present work demonstrates the feasibility of measuring time delays in lensed quasars in only one or two seasons, provided high signal-to-noise ratio data are obtained at a cadence close to daily.

astro-ph.CO↗

arXiv2020

COSMOGRAIL XIX: Time delays in 18 strongly lensed quasars from 15 years of optical monitoring

We present the results of 15 years of monitoring lensed quasars, which was conducted by the COSMOGRAIL programme at the Leonhard Euler 1.2m Swiss Telescope. The decade-long light curves of 23 lensed systems are presented for the first time. We complement our data set with other monitoring data available in the literature to measure the time delays in 18 systems, among which nine reach a relative precision better than 15% for at least one time delay. To achieve this, we developed an automated version of the curve-shifting toolbox PyCS to ensure robust estimation of the time delay in the presence of microlensing, while accounting for the errors due to the imperfect representation of microlensing. We also re-analysed the previously published time delays of RX J1131$-$1231 and HE 0435$-$1223, by adding six and two new seasons of monitoring, respectively, and confirming the previous time-delay measurements. When the time delay measurement is possible, we corrected the light curves of the lensed images from their time delay and present the difference curves to highlight the microlensing signal contained in the data. To date, this is the largest sample of decade-long lens monitoring data, which is useful to measure $H_0$ and the size of quasar accretion discs with microlensing as well as to study quasar variability.

astro-ph.CO↗

arXiv2020

Measuring accretion disk sizes of lensed quasars with microlensing time delay in multi-band light curves

Time-delay cosmography in strongly lensed quasars offer an independent way of measuring the Hubble constant, $H_0$. However, it has been proposed that the combination of microlensing and source-size effects, also known as microlensing time delay can potentially increase the uncertainty in time-delay measurements as well as lead to a biased time delay. In this work, we first investigate how microlensing time delay changes with assumptions on the initial mass function (IMF) and find that the more massive microlenses produce the sharper distributions of microlensing time delays. We also find that the IMF has modest effect on the the magnification probability distributions. Second, we present a new method to measure the color-dependent source size in lensed quasars using the microlensing time delays inferred from multi-band light curves. In practice the relevant observable is the differential microlensing time delays between different bands. We show from simulation using the facility as Vera C. Rubin Observatory that if this differential time delay between bands can be measured with a precision of $0.1$ days in any given lensed image, the disk size can be recovered to within a factor of $2$. If four lensed images are used, our method is able to achieve an unbiased source measurement within error of the order of $20\%$, which is comparable with other techniques.

astro-ph.GA↗

arXiv2020

Time Delay Lens Modelling Challenge

In recent years, breakthroughs in methods and data have enabled gravitational time delays to emerge as a very powerful tool to measure the Hubble constant $H_0$. However, published state-of-the-art analyses require of order 1 year of expert investigator time and up to a million hours of computing time per system. Furthermore, as precision improves, it is crucial to identify and mitigate systematic uncertainties. With this time delay lens modelling challenge we aim to assess the level of precision and accuracy of the modelling techniques that are currently fast enough to handle of order 50 lenses, via the blind analysis of simulated datasets. The results in Rung 1 and Rung 2 show that methods that use only the point source positions tend to have lower precision ($10 - 20\%$) while remaining accurate. In Rung 2, the methods that exploit the full information of the imaging and kinematic datasets can recover $H_0$ within the target accuracy ($ |A| < 2\%$) and precision ($< 6\%$ per system), even in the presence of poorly known point spread function and complex source morphology. A post-unblinding analysis of Rung 3 showed the numerical precision of the ray-traced cosmological simulations to be insufficient to test lens modelling methodology at the percent level, making the results difficult to interpret. A new challenge with improved simulations is needed to make further progress in the investigation of systematic uncertainties. For completeness, we present the Rung 3 results in an appendix, and use them to discuss various approaches to mitigating against similar subtle data generation effects in future blind challenges.

astro-ph.CO↗

arXiv2020

H0LiCOW XI. A weak lensing measurement of the external convergence in the field of the lensed quasar B1608+656 using HST and Subaru deep imaging

We investigate the environment and line of sight of the H0LiCOW lens B1608+656 using Subaru Suprime-Cam and the Hubble Space Telescope (HST) to perform a weak lensing analysis. We compare three different methods to reconstruct the mass map of the field, i.e. the standard Kaiser-Squires inversion coupled with inpainting and Gaussian or wavelet filtering, and $\tt{Glimpse}$ a method based on sparse regularization of the shear field. We find no substantial difference between the 2D mass reconstructions, but we find that the ground-based data is less sensitive to small-scale structures than the space-based observations. Marginalising over the results obtained with all the reconstruction techniques applied to the two available HST filters F606W and F814W, we estimate the external convergence, $κ_{\rm ext}$ at the position of B1608+656 is $κ_{\rm ext} = 0.11^{+0.06}_{-0.04}$, where the error bars corresponds respectively to the 16th and 84th quartiles. This result is compatible with previous estimates using the number-counts technique, suggesting that B1608+656 resides in an over-dense line of sight, but with a completely different technique. Using our mass reconstructions, we also compare the convergence at the position of several groups of galaxies in the field of B1608+656 with the mass measurements using various analytical mass profiles, and find that the weak lensing results favor truncated halo models.

astro-ph.GA↗

arXiv2020

STRIDES: a 3.9 per cent measurement of the Hubble constant from the strong lens system DES J0408-5354

We present a blind time-delay cosmographic analysis for the lens system DES J0408$-$5354. This system is extraordinary for the presence of two sets of multiple images at different redshifts, which provide the opportunity to obtain more information at the cost of increased modelling complexity with respect to previously analyzed systems. We perform detailed modelling of the mass distribution for this lens system using three band Hubble Space Telescope imaging. We combine the measured time delays, line-of-sight central velocity dispersion of the deflector, and statistically constrained external convergence with our lens models to estimate two cosmological distances. We measure the "effective" time-delay distance corresponding to the redshifts of the deflector and the lensed quasar $D_{Δt}^{\rm eff}=3382^{+146}_{-115}$ Mpc and the angular diameter distance to the deflector $D_{\rm d}=1711^{+376}_{-280}$ Mpc, with covariance between the two distances. From these constraints on the cosmological distances, we infer the Hubble constant $H_0 = 74.2^{+2.7}_{-3.0}$ km s$^{-1}$ Mpc$^{-1}$ assuming a flat $Λ$CDM cosmology and a uniform prior for $Ω_{\rm m}$ as $Ω_{\rm m} \sim \mathcal{U}(0.05, 0.5)$. This measurement gives the most precise constraint on $H_0$ to date from a single lens. Our measurement is consistent with that obtained from the previous sample of six lenses analyzed by the $H_0$ Lenses in COSMOGRAIL's Wellspring (H0LiCOW) collaboration. It is also consistent with measurements of $H_0$ based on the local distance ladder, reinforcing the tension with the inference from early Universe probes, for example, with 2.2$σ$ discrepancy from the cosmic microwave background measurement.

astro-ph.CO↗

arXiv2019

Twisted quasar light curves: implications for continuum reverberation mapping of accretion disks

With the advent of high-cadence and multi-band photometric monitoring facilities, continuum reverberation mapping is becoming of increasing importance to measure the physical size of quasar accretion disks. The method is based on the measurement of the time it takes for a signal to propagate from the center to the outer parts of the central engine, assuming the continuum light curve at a given wavelength has a time shift of the order of a few days with respect to light curves obtained at shorter wavelengths. We show that with high-quality light curves, this assumption is not valid anymore and that light curves at different wavelengths are not only shifted in time but also distorted: in the context of the lamp-post model and thin-disk geometry, the multi-band light curves are in fact convolved by a transfer function whose size increase with wavelength. We illustrate the effect with simulated light curves in the LSST ugrizy bands and examine the impact on the delay measurements when using three different methods, namely JAVELIN, CREAM, and PyCS. We find that current accretion disk sizes estimated from JAVELIN and PyCS are underestimated by $\sim30\%$ and that unbiased measurement are only obtained with methods that properly take the skewed transfer functions into account, as the CREAM code does. With the LSST-like light curves, we expect to achieve measurement errors below $5\%$ with typical 2-day photometric cadence.

astro-ph.GA↗

arXiv2019

Strongly lensed SNe Ia in the era of LSST: observing cadence for lens discoveries and time-delay measurements

The upcoming Large Synoptic Survey Telescope (LSST) will detect many strongly lensed Type Ia supernovae (LSNe Ia) for time-delay cosmography. This will provide an independent and direct way for measuring the Hubble constant $H_0$, which is necessary to address the current $4.4 σ$ tension in $H_0$ between the local distance ladder and the early Universe measurements. We present a detailed analysis of different observing strategies for the LSST, and quantify their impact on time-delay measurement between multiple images of LSNe Ia. For this, we produced microlensed mock-LSST light curves for which we estimated the time delay between different images. We find that using only LSST data for time-delay cosmography is not ideal. Instead, we advocate using LSST as a discovery machine for LSNe Ia, enabling time delay measurements from follow-up observations from other instruments in order to increase the number of systems by a factor of 2 to 16 depending on the observing strategy. Furthermore, we find that LSST observing strategies, which provide a good sampling frequency (the mean inter-night gap is around two days) and high cumulative season length (ten seasons with a season length of around 170 days per season), are favored. Rolling cadences subdivide the survey and focus on different parts in different years; these observing strategies trade the number of seasons for better sampling frequency. In our investigation, this leads to half the number of systems in comparison to the best observing strategy. Therefore rolling cadences are disfavored because the gain from the increased sampling frequency cannot compensate for the shortened cumulative season length. We anticipate that the sample of lensed SNe Ia from our preferred LSST cadence strategies with rapid follow-up observations would yield an independent percent-level constraint on $H_0$.

astro-ph.IM↗

arXiv2019

H0LiCOW X: Spectroscopic/imaging survey and galaxy-group identification around the strong gravitational lens system WFI2033-4723

Galaxies and galaxy groups located along the line of sight towards gravitationally lensed quasars produce high-order perturbations of the gravitational potential at the lens position. When these perturbation are too large, they can induce a systematic error on $H_0$ of a few-percent if the lens system is used for cosmological inference and the perturbers are not explicitly accounted for in the lens model. In this work, we present a detailed characterization of the environment of the lens system WFI2033-4723 ($z_{\rm src} = 1.662$, $z_{\rm lens}$ = 0.6575), one of the core targets of the H0LICOW project for which we present cosmological inferences in a companion paper (Rusu et al. 2019). We use the Gemini and ESO-Very Large telescopes to measure the spectroscopic redshifts of the brightest galaxies towards the lens, and use the ESO-MUSE integral field spectrograph to measure the velocity-dispersion of the lens ($σ_{\rm {los}}= 250^{+15}_{-21}$ km/s) and of several nearby galaxies. In addition, we measure photometric redshifts and stellar masses of all galaxies down to $i < 23$ mag, mainly based on Dark Energy Survey imaging (DR1). Our new catalog, complemented with literature data, more than doubles the number of known galaxy spectroscopic redshifts in the direct vicinity of the lens, expanding to 116 (64) the number of spectroscopic redshifts for galaxies separated by less than 3 arcmin (2 arcmin) from the lens. Using the flexion-shift as a measure of the amplitude of the gravitational perturbation, we identify 2 galaxy groups and 3 galaxies that require specific attention in the lens models. The ESO MUSE data enable us to measure the velocity-dispersions of three of these galaxies. These results are essential for the cosmological inference analysis presented in Rusu et al. (2019).

astro-ph.GA↗

arXiv2019

The Hubble Constant determined through an inverse distance ladder including quasar time delays and Type Ia supernovae

Context. The precise determination of the present-day expansion rate of the Universe, expressed through the Hubble constant $H_0$, is one of the most pressing challenges in modern cosmology. Assuming flat $Λ$CDM, $H_0$ inference at high redshift using cosmic-microwave-background data from Planck disagrees at the 4.4$σ$ level with measurements based on the local distance ladder made up of parallaxes, Cepheids and Type Ia supernovae (SNe Ia), often referred to as "Hubble tension". Independent, cosmological-model-insensitive ways to infer $H_0$ are of critical importance. Aims. We apply an inverse-distance-ladder approach, combining strong-lensing time-delay-distance measurements with SN Ia data. By themselves, SNe Ia are merely good relative distance indicators, but by anchoring them to strong gravitational lenses one can obtain an $H_0$ measurement that is relatively insensitive to other cosmological parameters. Methods. A cosmological parameter estimate is performed for different cosmological background models, both for strong-lensing data alone and for the combined lensing + SNe Ia data sets. Results. The cosmological-model dependence of strong-lensing $H_0$ measurements is significantly mitigated through the inverse distance ladder. In combination with SN Ia data, the inferred $H_0$ consistently lies around 73-74 km s$^{-1}$ Mpc$^{-1}$, regardless of the assumed cosmological background model. Our results agree nicely with those from the local distance ladder, but there is a >2$σ$ tension with Planck results, and a ~1.5$σ$ discrepancy with results from an inverse distance ladder including Planck, Baryon Acoustic Oscillations and SNe Ia. Future strong-lensing distance measurements will reduce the uncertainties in $H_0$ from our inverse distance ladder.

astro-ph.CO↗

arXiv2019

H0LiCOW - IX. Cosmographic analysis of the doubly imaged quasar SDSS 1206+4332 and a new measurement of the Hubble constant

We present a blind time-delay strong lensing (TDSL) cosmographic analysis of the doubly imaged quasar SDSS 1206+4332. We combine the relative time delay between the quasar images, Hubble Space Telescope imaging, the Keck stellar velocity dispersion of the lensing galaxy, and wide-field photometric and spectroscopic data of the field to constrain two angular diameter distance relations. The combined analysis is performed by forward modelling the individual data sets through a Bayesian hierarchical framework, and it is kept blind until the very end to prevent experimenter bias. After unblinding, the inferred distances imply a Hubble constant $H_0 = 68.8^{+5.4}_{-5.1}$ kms$^{-1}$Mpc$^{-1}$, assuming a flat Lambda cold dark matter cosmology with uniform prior on $Ω_{\rm m}$ in [0.05, 0.5]. The precision of our cosmographic measurement with the doubly imaged quasar SDSS 1206+4332 is comparable with those of quadruply imaged quasars and opens the path to perform on selected doubles the same analysis as anticipated for quads. Our analysis is based on a completely independent lensing code than our previous three H0LiCOW systems and the new measurement is fully consistent with those. We provide the analysis scripts paired with the publicly available software to facilitate independent analysis. The consistency between blind measurements with independent codes provides an important sanity check on lens modelling systematics. By combining the likelihoods of the four systems under the same prior, we obtain $H_0 = 72.5^{+2.1}_{-2.3}$kms$^{-1}$Mpc$^{-1}$. This measurement is independent of the distance ladder and other cosmological probes.

astro-ph.CO↗

arXiv2019

COSMOGRAIL XVIII: time delays of the quadruply lensed quasar WFI2033-4723

We present new measurements of the time delays of WFI2033-4723. The data sets used in this work include 14 years of data taken at the 1.2m Leonhard Euler Swiss telescope, 13 years of data from the SMARTS 1.3m telescope at Las Campanas Observatory and a single year of high-cadence and high-precision monitoring at the MPIA 2.2m telescope. The time delays measured from these different data sets, all taken in the R-band, are in good agreement with each other and with previous measurements from the literature. Combining all the time-delay estimates from our data sets results in Dt_AB = 36.2-0.8+0.7 days (2.1% precision), Dt_AC = -23.3-1.4+1.2 days (5.6%) and Dt_BC = -59.4-1.3+1.3 days (2.2%). In addition, the close image pair A1-A2 of the lensed quasars can be resolved in the MPIA 2.2m data. We measure a time delay consistent with zero in this pair of images. We also explore the prior distributions of microlensing time-delay potentially affecting the cosmological time-delay measurements of WFI2033-4723. There is however no strong indication in our measurements that microlensing time delay is neither present nor absent. This work is part of a H0LiCOW series focusing on measuring the Hubble constant from WFI2033-4723.

astro-ph.CO↗

arXiv2019

The CORALIE survey for southern extrasolar planets XVIII. Three new massive planets and two low mass brown dwarfs at separation larger than 5 AU

Context. Since 1998, a planet-search around main sequence stars within 50~pc in the southern hemisphere has been carried out with the CORALIE spectrograph at La Silla Observatory. Aims. With an observing time span of more than 20 years, the CORALIE survey is able to detect long term trends in data with masses and separations large enough to select ideal targets for direct imaging. Detecting these giant companion candidates will allow us to start bridging the gap between radial velocity detected exoplanets and directly imaged planets and brown dwarfs. Methods. Long-term precise Doppler measurements with the CORALIE spectrograph reveal radial velocity signatures of massive planetary companions and brown dwarfs on long-period orbits. Results. In this paper we report the discovery of new companions orbiting HD~181234, HD~13724, HD~25015, HD~92987 and HD~50499. We also report updated orbital parameters for HD~50499b, HD~92788b and HD~98649b. In addition, we confirm the recent detection of HD~92788c. The newly reported companions span a period range of 15.6 to 40.4 years and a mass domain of 2.93 to 26.77 $M_{\mathrm{Jup}}$, the latter of which straddles the nominal boundary between planets and brown dwarfs. Conclusion. We have reported the detection of five new companions and updated parameters of four known extrasolar planets. We identify at least some of these companions to be promising candidates for imaging and further characterisation.

astro-ph.EP↗

arXiv2019

Impact of the 3D source geometry on time-delay measurements of lensed type-Ia Supernovae

It has recently been proposed that gravitationally lensed type-Ia supernovae can provide microlensing-free time-delay measurements provided that the measurement is taken during the achromatic expansion phase of the explosion and that color light curves are used rather than single-band light curves. If verified, this would provide both precise and accurate time-delay measurements, making lensed type-Ia supernovae a new golden standard for time-delay cosmography. However, the 3D geometry of the expanding shell can introduce an additional bias that has not yet been fully explored. In this work, we present and discuss the impact of this effect on time-delay cosmography with lensed supernovae and find that on average it leads to a bias of a few tenths of a day for individual lensed systems. This is negligible in view of the cosmological time delays predicted for typical lensed type-Ia supernovae but not for the specific case of the recently discovered type-Ia supernova iPTF16geu, whose time delays are expected to be smaller than a day.

astro-ph.CO↗