arXiv subjects

V. D. Nguyen

Publications and source records attributed to V. D. Nguyen.

5 recordsLinked to original sources

arXiv2026

Impact of gate voltage on switching field of perpendicular magnetic tunnel junctions with a synthetic antiferromagnetic free layer

We present micromagnetic simulations and experiments on voltage-assisted field switching in perpendicular magnetic tunnel junctions (MTJs) with a synthetic antiferromagnetic (SAF) free layer, where the magnetic state of one sublayer is detected via tunneling magnetoresistance (TMR). Simulations reveal that local modulation of perpendicular magnetic anisotropy (PMA) in one SAF sublayer leads to distinct switching characteristics. The switching field varies linearly with the anisotropy field, indicating voltage-controlled magnetic anisotropy (VCMA)-dominated dynamics similar to single free-layer devices. We then experimentally study the magnetic switching field of MTJ devices with SAF free layers under applied gate voltage. By varying the MgO tunnel barrier thickness to systematically modulate the resistance-area (RA) product, we enable quantitative separation of spin-transfer torque (STT), VCMA, and Joule heating contributions. Our findings indicate that VCMA dominates in devices with a high RA product, while low-RA devices exhibit nonlinear switching behavior due to enhanced contributions from STT and Joule heating. Furthermore, the effective fields derived from STT, VCMA, and Joule heating contributions under various gate voltages show minimal dependence on device critical dimensions, indicating favorable scaling behavior. This work presents a unified framework analyzing the roles of STT, VCMA, and Joule heating in SAF-based voltage-gated spin-orbit torque (SOT) MRAM, offering key insights for the optimization of performance, energy efficiency, and scalability in SOT-MRAM technologies.

cond-mat.mes-hall↗

arXiv2023

Perspectives and Challenges of Scaled Boolean Spintronic Circuits Based on Magnetic Tunnel Junction Transducers

This paper addresses the question: Can spintronic circuits based on Magnetic Tunnel Junction (MTJ) transducers outperform their state-of-the-art CMOS counterparts? To this end, we use the EPFL combinational benchmark sets, synthesize them in 7 nm CMOS and in MTJ-based spintronic technologies, and compare the two implementation methods in terms of Energy-Delay-Product (EDP). To fully utilize the technologies potential, CMOS and spintronic implementations are built upon standard Boolean and Majority Gates, respectively. For the spintronic circuits, we assumed that domain conversion (electric/magnetic to magnetic/electric) is performed by means of MTJs and the computation is accomplished by domain wall based majority gates, and considered two EDP estimation scenarios: (i) Uniform Benchmarking, which ignores the circuit's internal structure and only includes domain transducers power and delay contributions into the calculations, and (ii) Majority-Inverter-Graph Benchmarking, which also embeds the circuit structure, the associated critical path delay and energy consumption by DW propagation. Our results indicate that for the uniform case, the spintronic route is better suited for the implementation of complex circuits with few inputs and outputs. On the other hand, when the circuit structure is also considered via majority and inverter synthesis, our analysis clearly indicates that in order to match and eventually outperform CMOS performance, MTJ efficiency has to be improved by 3-4 orders of magnitude. While it is clear that for the time being the MTJ-based-spintronic way cannot compete with CMOS, further transducer developments may tip the balance, which, when combined with information non-volatility, may make spintronic implementation for certain applications that require a large number of calculations and have a rather limited amount of interaction with the environment.

physics.app-ph↗

arXiv2020

Back-hopping in Spin-Transfer-Torque switching of perpendicularly magnetized tunnel junctions

We analyse the phenomenon of back-hopping in spin-torque induced switching of the magnetization in perpendicularly magnetized tunnel junctions. The analysis is based on single-shot time-resolved conductance measurements of the pulse-induced back-hopping. Studying several material variants reveals that the back-hopping is a feature of the nominally fixed system of the tunnel junction. The back-hopping is found to proceed by two sequential switching events that lead to a final state P' of conductance close to --but distinct from-- that of the conventional parallel state. The P' state does not exist at remanence. It generally relaxes to the conventional antiparallel state if the current is removed. The P' state involves a switching of the sole spin-polarizing part of the fixed layers. The analysis of literature indicates that back-hopping occurs only when the spin-polarizing layer is too weakly coupled to the rest of the fixed system, which justifies a posteriori the mitigation strategies of back-hopping that were implemented empirically in spin-transfer-torque magnetic random access memories.

cond-mat.mtrl-sci↗

arXiv2018

Kerr non-linearity in a superconducting Josephson metamaterial

We present a detailed experimental and theoretical analysis of the dispersion and non-linear Kerr frequency shifts of plasma modes in a one-dimensional Josephson junction chain containing 500 SQUIDs in the regime of weak nonlinearity. The measured low-power dispersion curve agrees perfectly with the theoretical model if we take into account the Kerr renormalisation of the bare frequencies and the long-range nature of the island charge screening by a remote ground plane. We measured the self- and cross-Kerr shifts for the frequencies of the eight lowest modes in the chain. We compare the measured Kerr coefficients with theory and find good agreement.

cond-mat.supr-con↗

arXiv2015

Third type of domain wall in soft magnetic nanostrips

Magnetic domain walls (DWs) in nanostructures are low-dimensional objects that separate regions with uniform magnetisation. Since they can have different shapes and widths, DWs are an exciting playground for fundamental research, and became in the past years the subject of intense works, mainly focused on controlling, manipulating, and moving their internal magnetic configuration. In nanostrips with in-plane magnetisation, two DWs have been identified: in thin and narrow strips, transverse walls are energetically favored, while in thicker and wider strips vortex walls have lower energy. The associated phase diagram is now well established and often used to predict the low-energy magnetic configuration in a given magnetic nanostructure. However, besides the transverse and vortex walls, we find numerically that another type of wall exists in permalloy nanostrips. This third type of DW is characterised by a three-dimensional, flux closure micromagnetic structure with an unusual length and three internal degrees of freedom. Magnetic imaging on lithographically-patterned permalloy nanostrips confirms these predictions and shows that these DWs can be moved with an external magnetic field of about 1mT. An extended phase diagram describing the regions of stability of all known types of DWs in permalloy nanostrips is provided.

cond-mat.mes-hall↗