arXiv subjects

V. Gapienko

Publications and source records attributed to V. Gapienko.

34 records · Page 2Linked to original sources

arXiv2011

Cross-sections of large-angle hadron production in proton- and pion-nucleus interactions VII: tin nuclei and beam momenta from \pm3 GeV/c to \pm15 GeV/c

We report on double-differential inclusive cross-sections of the production of secondary protons, charged pions, and deuterons, in the interactions with a 5% nuclear interaction length thick stationary tin target, of proton and pion beams with momentum from \pm3 GeV/c to \pm15 GeV/c. Results are given for secondary particles with production angles between 20 and 125 degrees. Cross-sections on tin nuclei are compared with cross-sections on beryllium, carbon, copper, tantalum and lead nuclei.

hep-ex↗

arXiv2011

Inclusive Measurements of Inelastic Electron and Positron Scattering from Unpolarized Hydrogen and Deuterium Targets

Results of inclusive measurements of inelastic electron and positron scattering from unpolarized protons and deuterons at the HERMES experiment are presented. The structure functions $F_2^p$ and $F_2^d$ are determined using a parameterization of existing data for the longitudinal-to-transverse virtual-photon absorption cross-section ratio. The HERMES results provide data in the ranges $0.006\leq x\leq 0.9$ and 0.1 GeV$^2\leq Q^2\leq$ 20 GeV$^2$, covering the transition region between the perturbative and the non-perturbative regimes of QCD in a so-far largely unexplored kinematic region. They are in agreement with existing world data in the region of overlap. The measured cross sections are used, in combination with data from other experiments, to perform fits to the photon-nucleon cross section using the functional form of the ALLM model. The deuteron-to-proton cross-section ratio is also determined.

hep-ex↗

arXiv2011

Measurement of azimuthal asymmetries associated with deeply virtual Compton scattering on a longitudinally polarized deuterium target

Azimuthal asymmetries in exclusive electroproduction of a real photon from a longitudinally polarized deuterium target are measured with respect to target polarization alone and with respect to target polarization combined with beam helicity and/or beam charge. The asymmetries appear in the distribution of the real photons in the azimuthal angle $ϕ$ around the virtual photon direction, relative to the lepton scattering plane. The asymmetries arise from the deeply virtual Compton scattering process and its interference with the Bethe-Heitler process. The results for the beam-charge and beam-helicity asymmetries from a tensor polarized deuterium target with vanishing vector polarization are shown to be compatible with those from an unpolarized deuterium target, which is expected for incoherent scattering dominant at larger momentum transfer. Furthermore, the results for the single target-spin asymmetry and for the double-spin asymmetry are found to be compatible with the corresponding asymmetries previously measured on a hydrogen target. For coherent scattering on the deuteron at small momentum transfer to the target, these findings imply that the tensor contribution to the cross section is small. Furthermore, the tensor asymmetry is found to be compatible with zero.

hep-ex↗

arXiv2011

Ratios of Helicity Amplitudes for Exclusive rho-0 Electroproduction

Exclusive rho^0-meson electroproduction is studied in the HERMES experiment, using a 27.6 GeV longitudinally polarized electron/positron beam and unpolarized hydrogen and deuterium targets in the kinematic region 0.5 GeV^2 < Q^2 < 7.0 GeV^2, 3.0 GeV < W < 6.3 GeV, and -t' < 0.4 GeV^2. Real and imaginary parts of the ratios of the natural-parity-exchange helicity amplitudes T_{11} (γ^*_T --> ρ_T), T_{01} (γ^*_T --> ρ_L), T_{10} (γ^*_L --> ρ_T), and T_{1-1} (γ^*_{-T} -->ρ_T) to T_{00} (γ^*_L --> ρ_L) are extracted from the data. For the unnatural-parity-exchange amplitude U_{11}, the ratio |U_{11}/T_{00}| is obtained. The Q^2 and t' dependences of these ratios are presented and compared with perturbative QCD predictions.

hep-ex↗

arXiv2010

Cross-sections of large-angle hadron production in proton- and pion-nucleus interactions VI: carbon nuclei and beam momenta from \pm 3 GeV/c to \pm 15 GeV/c

We report on double-differential inclusive cross-sections of the production of secondary protons, charged pions, and deuterons, in the interactions with a 5% nuclear interaction length thick stationary carbon target, of proton and pion beams with momentum from \pm 3 GeV/c to \pm 15 GeV/c. Results are given for secondary particles with production angles between 20 and 125 degrees. Cross-sections on carbon nuclei are compared with cross-sections on beryllium, copper, tantalum and lead nuclei.

hep-ex↗

arXiv2010

Effects of transversity in deep-inelastic scattering by polarized protons

Single-spin asymmetries for pions and charged kaons are measured in semi-inclusive deep-inelastic scattering of positrons and electrons off a transversely nuclear-polarized hydrogen target. The dependence of the cross section on the azimuthal angles of the target polarization (phi_S)and the produced hadron (phi) is found to have a substantial sin(phi+phi_S) modulation for the production of pi+, pi- and K+. This Fourier component can be interpreted in terms of non-zero transversity distribution functions and non-zero favored and disfavored Collins fragmentation functions with opposite sign. For pi0 and K- production the amplitude of this Fourier component is consistent with zero.

hep-ex↗

arXiv2010

Exclusive Leptoproduction of Real Photons on a Longitudinally Polarised Hydrogen Target

Polarisation asymmetries are measured for the hard exclusive leptoproduction of real photons from a longitudinally polarised hydrogen target. These asymmetries arise from the deeply virtual Compton scattering and Bethe-Heitler processes. From the data are extracted two asymmetries in the azimuthal distribution of produced real photons about the direction of the exchanged virtual photon: A_UL with respect to the target polarisation and A_LL with respect to the product of the beam and target polarisations. Results for both asymmetries are compared to the predictions from a generalised parton distribution model. The sin(phi) and cos(0*phi) amplitudes observed respectively for the A_UL and A_LL asymmetries are compatible with the sizeable predictions from the model. Unexpectedly, a sin(2*phi) modulation in the A_UL asymmetry with a magnitude similar to that of the sin(phi) modulation is observed.

hep-ex↗

arXiv2009

Why the paper CERN-PH-EP-2009-015 (arXiv:0903.4762) is scientifically unacceptable

The paper CERN-PH-EP-2009-015 (arXiv:0903.4762) by A. Bagulya et al. violates standards of quality of work and scientific ethics on several counts. The paper contains assertions that contradict established detector physics. The paper falls short of proving the correctness of the authors' concepts and results. The paper ignores or quotes misleadingly pertinent published work. The paper ignores the fact that the authors' concepts and results have already been shown wrong in the published literature. The authors seem unaware that cross-section results from the 'HARP Collaboration' that are based on the paper's concepts and algorithms are in gross disagreement with the results of a second analysis of the same data, and with the results of other experiments.

physics.ins-det↗

arXiv2009

Cross-Sections of Large-Angle Hadron Production in Proton- and Pion-Nucleus Interactions I: Beryllium Nuclei and Beam Momenta of +8.9 Gev/c and -8.0 Gev/c

We report on double-differential inclusive cross-sections of the production of secondary protons, deuterons, and charged pions and kaons, in the interactions with a 5% nuclear interaction length thick stationary beryllium target, of a +8.9 GeV/c proton and pion beam, and a -8.0 GeV/c pion beam. Results are given for secondary particles with production angles between 20 and 125 degrees.

hep-ex↗

arXiv2006

RPC with low-resistive phosphate glass electrodes as a candidate for the CBM TOF

Usage of electrodes made of glass with low bulk resistivity seems to be a promising way to adapt the Resistive Plate Chambers (RPC) to the high-rate environment of the upcoming CBM experiment. A pilot four-gap RPC sample with electrodes made of phosphate glass, which has bulk resistivity in the order of 10^10 Ohm cm, has been studied with MIP beam for TOF applications. The tests have yielded satisfactory results: the efficiency remains above 95% and the time resolution stays within 120 ps up to the particle rate of 18 kHz/cm2. The increase in rate from 2.25 to 18 kHz/cm2 leads to an increase of estimated "tails" fraction in the time spectrum from 1.5% to 4%.

physics.ins-det↗

arXiv2002

Comparison of Timing Properties of Glass Multigap RPCs with 0.3 and 0.6 mm Subgap Width

Timing characteristics of two multigap RPCs were compared. One had four subgaps 0.3 mm wide and the other - two subgaps 0.6 mm wide. Specially developed electronics was used. Electronics resolution convoluted with measured charge spectra at operating point was estimated as about 65 ps. The best time resolutions obtained at low counting rate were 75 ps for the 0.3 mm subgap and about 125 ps for the 0.6 mm one, after slewing corrections. The rate capability of the (2x0.6mm) counter was found to be considerably lower than for the (2x(2x0.3mm)) one.

hep-ex↗

arXiv2002

Study of the avalanche to streamer transition in the glass RPC exited by UV light

A small glass RPC filled with Ar/Isob./Freon mixture has been exposed to a UV laser light. Avalanche and streamer regimes of discharge were reached in a fixed region of the RPC exited by the UV. A dependence of avalanche to streamer transition process on the laser beam intensity and on the applied high voltage was studied. Two types of the streamer signal have been observed. Using a CCD TV camera, pictures on multi-streamer propagation over RPC were obtained.

hep-ex↗

arXiv2002

Four-gap glass RPC as a candidate to a large area thin time-of-flight detector

A four-gap glass RPC with 0.3mm gap size was tested with hadron beam as a time-of-flight detector having a time resolution of ~ 100ps. A thickness of the detector together with front-end electronics is ~ 12mm. Results on time resolution dependently on a pad size are presented. This paper contains first result on the timing RPC (with ~ 100ps resolution) having a strip read-out. Study has been done within the HARP experiment (CERN-PS214) R&D work. A obtaned data can be useful if a design of a large area thin timing detector has to be done.

hep-ex↗

arXiv1998

Testrun results from prototype fiber detectors for high rate particle tracking

A fiber detector concept has been realized allowing to registrate particles within less than 100 nsec with a space point precision of about 0.1 mm at low occupancy. Three full size prototypes have been build by different producers and tested at a 3 GeV electron beam at DESY. After 3 m of light guides 8-10 photoelectrons were registrated by multichannel photomultipliers providing an efficiency of more than 99%. Using all available data a resolution of 0.086 mm was measured.

physics.ins-det↗

arXiv1998

Tests of a fiber detector concept for high rate particle tracking

A fiber detector concept is suggested allowing to registrate particles within less than 100 nsec with a space point precision of about 0.1 mm at low occuppancy. The fibers should be radiation hard for 1 Mrad/year. Corresponding prototypes have been build and tested at a 3 GeV electron beam at DESY. Preliminary results of these tests indicate that the design goal for the detector is reached.

physics.ins-det↗

arXiv1997

Development of scintillating fiber detector technology for high rate particle tracking

The performance of a scintillating fiber detector prototype for tracking under high rate conditions is investigated. A spatial resolution of about100 micron is aimed for the detector. Further demands are low occupancy and radiation hardness up to 1 Mrad/year. Fibers with different radii and different wavelengths of the scintillation light from different producers have been extensively tested concerning light output, attenuation length and radiation hardness, with and without coupling them to light guides of different length and diameter. In a testrun at a 3 GeV electron beam the space dependent efficiency and spatial resolution of fiber bundels were measured by means of two external reference detectors with a precision of 50 micron. The light output profile across fiber roads has been determined with the same accuracy. Different technologies were adopted for the construction of tracker modules consisting of 14 layers of 0.5 mm fibers and 0.7 mm pitch. A winding technology provides reliable results to produce later fiber modules of about 25 cm x 25 cm area. We conclude that on the basis of these results a fiber tracker for high rate conditions can be built.

hep-ex↗