arXiv subjects

V. Granata

Publications and source records attributed to V. Granata.

At least 19 recordsLinked to original sources

arXiv2026

The PLATO field selection process III. Selection of the Prime Sample for the LOPS2 field

The PLanetary Transits and Oscillations of stars (PLATO) mission will begin its four-year nominal mission in early 2027 by monitoring its Long-duration Observation Phase field at South (LOPS2) for at least two years continuously. The primary aim of PLATO is a very ambitious and challenging one: the discovery of Earth-like planets in the habitable zone of nearby and bright solar analogues. To this purpose, the PLATO Mission Consortium, through its Ground-based Observing Program, will perform the follow-up needed to confirm part of the candidate planets photometrically detected by PLATO and measure their masses through radial velocity curves. For the LOPS2, the Ground-based Observing Program is committed (as part of the PLATO mission) to follow-up the candidate exoplanets discovered orbiting the 15,000 high-quality target subset of the PLATO Input Catalog (PIC) known as the Prime Sample. The Prime Sample will be made public nine months before launch in the context of the first Guest Observer call for proposals to be issued by the European Space Agency. Here, we present the quantitative metrics and thresholds defined to select and prioritize the Prime Sample. Our method is perfectly general and suitable to rank any list of stars surveyed for transiting planets. We also describe the astrophysical properties of the LOPS2 Prime Sample, both in a statistical sense and for some specific targets of interest.

astro-ph.EP↗

arXiv2026

The PLATO Input Catalogue of targets (tPIC) for the first Long Pointing Field

The ESA PLAnetary Transits and Oscillations of stars (PLATO) mission is designed to detect terrestrial planets in the habitable zones of solar-type stars. Owing to telemetry constraints, the selection of PLATO targets must be performed in advance. In this paper, we present the first public release of the PLATO Input Catalogue of targets (tPIC2.2), which provides the list of stars that will be observed during the PLATO first Long-duration Observation Phase field at South (LOPS2) as part of its core science program. We exploit astrometric and photometric data from Gaia Data Release 3 (DR3), together with three-dimensional maps of the local interstellar medium, to identify stars belonging to the PLATO stellar samples as from mission requirements. The tPIC comprises 217,741 stars, including 202,315 FGK dwarfs and subgiants, 15,037 M dwarfs and 789 known planet host stars. The median distances of the samples are 512 pc for FGK stars and 133 pc for M dwarfs. We estimate interstellar reddening for almost all targets and develop an algorithm to infer fundamental stellar parameters (effective temperature, radius, and mass) in an homogeneous way from astrometric and photometric observables. The tPIC fulfills all the science requirements of the PLATO mission. The tPIC also includes a list of stars that host known exoplanets (confirmed or still candidate), located within the LOPS2 field.

astro-ph.EP↗

arXiv2026

Ambipolar doping-induced surface in-gap state on Mott-insulating Ca$_2$RuO$_4$

We report an x-ray photoemission spectroscopy study of Ca$_2$RuO$_4$ surface-dosed with Cs alkali atoms and C$_{60}$ molecules. Due to its small ionization energy (large electron affinity), deposited Cs atoms (C$_{60}$ molecules) are expected to provide a solid surface with electrons (holes). Upon dosing the dopants to Mott-insulating Ca$_2$RuO$_4$, we found a new Ru $3d$ photoemission peak emerging on the lower binding-energy side, suggesting the creation of a core-hole screening channel associated with coherent Ru $4d$ states around the Fermi level. For both the Cs and C$_{60}$ dosing, this change occurred without an appreciable chemical potential jump. The coherent state, therefore, develops within the Mott gap through hybridization with the impurity level of the dopants. The present work highlights the flexibility of Mott-insulator surfaces as a playground for metal-insulator transitions.

cond-mat.str-el↗

arXiv2026

Experimental Realization of Optimized Ternary Mirror Coatings

We report on the first experimental realization of multi-material dielectric mirror coatings designed through a multi-objective optimization algorithm to simultaneously minimize thermal noise and optical losses. We validate this design strategy by fabricating and characterizing two distinct ternary systems: a SiNx -based proof-of-concept and a Ti:GeO2 -based system targeting lower optical losses. The performance of the SiN x coating shows remarkable agreement with predictions, demonstrating a noise amplitude spectral density reduction of 0.82 with respect to current reference coatings, and validating our design-to-fabrication pipeline. The Ti:GeO2 -based system achieves the crucial goal of sub-ppm absorption; its measured thermal noise, however, is higher than the theoretically predicted level of 0.71, extrapolated from single-layer material characterization. A dedicated tolerance analysis confirms that this discrepancy is not attributable to random thickness errors, emphasizing that further studies of the manufacturing process are needed to fully exploit this combination of materials. This work establishes a robust methodology for producing complex, high-performance optical coatings tailored for precision experiments.

physics.optics↗

arXiv2025

Selection and characterisation of the M-dwarf targets in the PLATO Input Catalogue

The ESA's PLAnetary Transits and Oscillations of Stars (PLATO) mission aims to detect planets orbiting around dwarfs and subgiant stars with spectral type F5 or later, including M-dwarfs. The PLATO Input Catalogue (PIC) contains all targets available for observation by the nominal science. The latest version, PIC2.1.0.1, focuses on the Southern PLATO field, named LOPS2, selected as the first long observation field, and includes the P4 sample, one of the four target samples outlined in the Science Requirement Document. P4 includes the M-dwarfs with magnitudes V < 16 located within LOPS2. A characterisation of the M-dwarfs in the PIC is essential for assessing their potentiality to host exoplanets, and eventually estimate the hosted planet(s) properties. The purpose of this paper is to describe how we selected the P4 M-dwarf targets, and obtained their fundamental parameters and properties. In this work, we introduce the P4 sample and detail the methodologies adopted for the measurement of their stellar parameters. Based on a statistical analysis of the P4 sample, we assess both the photometric and volume completeness, and classify the stellar populations according to their Galactic spatial-velocity components. The adopted stellar parameters are validated by comparison with independent methods from the literature used to estimate stellar radii. The P4 sample is compliant with the PLATO science requirements. Being magnitude limited, its volume completeness decreases going towards distances larger than 30 pc, where late-type targets are progressively less covered. The observed large spread in the colour-magnitude diagram is likely due to the combination of several effects such as metallicity, age, binarity and activity. The strategy we adopted for deriving stellar parameters provides results consistent with those obtained in the literature with different and independent methods.

astro-ph.SR↗

arXiv2025

SN 2016iog: A fast declining Type II-L supernova with an ultra-faint tail, persistently interacting with circumstellar material

We present optical photometric and spectroscopic observations of the rapidly declining Type IIL supernova (SN) 2016iog. SN 2016iog reached its peak $\sim$ 14 days after explosion, with an absolute magnitude in the $V$ band of $-18.64 \pm 0.15$ mag, followed by a steep decline of $8.85 \pm 0.15$~mag~(100\,d)$^{-1}$ post-peak. Such a high decline rate makes SN~2016iog one of the fastest declining Type~IIL SNe observed to date. The rapid rise in the light curve, combined with the nearly featureless continuum observed in the spectrum at +9.3 days, suggests the presence of interaction. In the recombination phase, we observed broad H$\alpha$ lines that persist at all epochs. In addition, the prominent double-peaked H$\alpha$ feature observed in the late-time spectrum (+190.8 days) is likely attributable either to significant dust formation within a cool dense shell or to asymmetric circumstellar material. These features suggest the presence of sustained interaction around SN~2016iog. We propose that the observed characteristics of SN~2016iog can be qualitatively explained by assuming a low-mass H-rich envelope surrounding a red supergiant progenitor star with low-density circumstellar material.

astro-ph.SR↗

arXiv2025

The PLATO field selection process. II. Characterization of LOPS2, the first long-pointing field

PLAnetary Transits and Oscillations of stars (PLATO) is an ESA M-class mission to be launched by the end of 2026 to discover and characterize transiting planets around bright and nearby stars, and in particular habitable rocky planets hosted by solar-like stars. Over the mission lifetime, an average of 8% of the science data rate will be allocated to Guest Observer programs (GOs) selected by ESA through public calls, hence it is essential for the community to know in advance where the observing fields will be located. In a previous paper, we identified two preliminary long-pointing fields (LOPN1 and LOPS1) for PLATO, respectively in the northern and southern hemisphere. Here we present LOPS2, a slightly adjusted version of the southern field that has recently been selected by the PLATO Science Working Team as the first field to be observed by PLATO for at least two continuous years, following the scientific requirements. In this paper, we describe the astrophysical content of LOPS2 in detail, including known planetary systems, bright/variable/binary stars, clusters and synergies with other current and future facilities.

astro-ph.EP↗

arXiv2024

The inflated, eccentric warm Jupiter TOI-4914 b orbiting a metal-poor star, and the hot Jupiters TOI-2714 b and TOI-2981 b

Recent observations of giant planets have revealed unexpected bulk densities. Hot Jupiters, in particular, appear larger than expected for their masses compared to planetary evolution models, while warm Jupiters seem denser than expected. These differences are often attributed to the influence of the stellar incident flux, but could they also result from different planet formation processes? Is there a trend linking the planetary density to the chemical composition of the host star? In this work we present the confirmation of three giant planets in orbit around solar analogue stars. TOI-2714 b ($P \simeq 2.5$ d, $R_{\rm p} \simeq 1.22 R_{\rm J}$, $M_{\rm p} = 0.72 M_{\rm J}$) and TOI-2981 b ($P \simeq 3.6$ d, $R_{\rm p} \simeq 1.2 R_{\rm J}$, $M_{\rm p} = 2 M_{\rm J}$) are hot Jupiters on nearly circular orbits, while TOI-4914 b ($P \simeq 10.6$ d, $R_{\rm p} \simeq 1.15 R_{\rm J}$, $M_{\rm p} = 0.72 M_{\rm J}$) is a warm Jupiter with a significant eccentricity ($e = 0.41 \pm 0.02$) that orbits a star more metal-poor ([Fe/H]$~= -0.13$) than most of the stars known to host giant planets. Our radial velocity (RV) follow-up with the HARPS spectrograph allows us to detect their Keplerian signals at high significance (7, 30, and 23$\sigma$, respectively) and to place a strong constraint on the eccentricity of TOI-4914 b (18$\sigma$). TOI-4914 b, with its large radius and low insolation flux ($F_\star < 2 \times 10^8~{\rm erg~s^{-1}~cm^{-2}}$), appears to be more inflated than what is supported by current theoretical models for giant planets. Moreover, it does not conform to the previously noted trend that warm giant planets orbiting metal-poor stars have low eccentricities. This study thus provides insights into the diverse orbital characteristics and formation processes of giant exoplanets, in particular the role of stellar metallicity in the evolution of planetary systems.

astro-ph.EP↗

arXiv2024

CHEOPS in-flight performance: A comprehensive look at the first 3.5 years of operations

CHEOPS is a space telescope specifically designed to monitor transiting exoplanets orbiting bright stars. In September 2023, CHEOPS completed its nominal mission and remains in excellent operational conditions. The mission has been extended until the end of 2026. Scientific and instrumental data have been collected throughout in-orbit commissioning and nominal operations, enabling a comprehensive analysis of the mission's performance. In this article, we present the results of this analysis with a twofold goal. First, we aim to inform the scientific community about the present status of the mission and what can be expected as the instrument ages. Secondly, we intend for this publication to serve as a legacy document for future missions, providing insights and lessons learned from the successful operation of CHEOPS. To evaluate the instrument performance in flight, we developed a comprehensive monitoring and characterisation programme. It consists of dedicated observations that allow us to characterise the instrument's response. In addition to the standard collection of nominal science and housekeeping data, these observations provide input for detecting, modelling, and correcting instrument systematics, discovering and addressing anomalies, and comparing the instrument's actual performance with expectations. The precision of the CHEOPS measurements has enabled the mission objectives to be met and exceeded. Careful modelling of the instrumental systematics allows the data quality to be significantly improved during the light curve analysis phase, resulting in more precise scientific measurements. CHEOPS is compliant with the driving scientific requirements of the mission. Although visible, the ageing of the instrument has not affected the mission's performance.

astro-ph.IM↗

arXiv2024

TASTE V. A new ground-based investigation of orbital decay in the ultra-hot Jupiter WASP-12b

The discovery of the first transiting hot Jupiters (HJs; giant planets on orbital periods shorter than $P\sim10$ days) was announced more than twenty years ago. As both ground- and space-based follow-up observations are piling up, we are approaching the temporal baseline required to detect secular variations in their orbital parameters. In particular, several recent studies focused on constraining the efficiency of the tidal decay mechanism to better understand the evolutionary time scales of HJ migration and engulfment. This can be achieved by measuring a monotonic decrease of orbital period $\mathrm{d}P/\mathrm{d}t<0$ due to mechanical energy being dissipated by tidal friction. WASP-12b was the first HJ for which a tidal decay scenario appeared convincing, even though alternative explanations have been hypothesized. Here we present a new analysis based on 28 unpublished high-precision transit light curves gathered over a twelve-year baseline and combined with all the available archival data, and an updated set of stellar parameters from HARPS-N high-resolution spectra, which are consistent with a main sequence scenario, close to the hydrogen exhaustion in the core. Our values of $\mathrm{d}P/\mathrm{d}t$ = $-30.72 \pm 2.67$ and $Q_{\ast}^{'}$ = $(2.13 \pm 0.18) \times 10^{5}$ are statistically consistent with previous studies, and indicate that WASP-12 is undergoing fast tidal dissipation. We additionally report the presence of an excess scatter in the timing data and discuss its possible origin.

astro-ph.EP↗

arXiv2023

Orbital-selective metal skin induced by alkali-metal-dosing Mott-insulating Ca$_2$RuO$_4$

Doped Mott insulators are the starting point for interesting physics such as high temperature superconductivity and quantum spin liquids. For multi-band Mott insulators, orbital selective ground states have been envisioned. However, orbital selective metals and Mott insulators have been difficult to realize experimentally. Here we demonstrate by photoemission spectroscopy how Ca$_2$RuO$_4$, upon alkali-metal surface doping, develops a single-band metal skin. Our dynamical mean field theory calculations reveal that homogeneous electron doping of Ca$_2$RuO$_4$ results in a multi-band metal. All together, our results provide compelling evidence for an orbital-selective Mott insulator breakdown, which is unachievable via simple electron doping. Supported by a cluster model and cluster perturbation theory calculations, we demonstrate a novel type of skin metal-insulator transition induced by surface dopants that orbital-selectively hybridize with the bulk Mott state and in turn produce coherent in-gap states.

cond-mat.str-el↗

arXiv2023

Magnetic structure of the magnetoelectric material Ba$_2$MnGe$_2$O$_7$

A detailed investigation of Ba$_2$MnGe$_2$O$_7$ was performed in its low-temperature magnetoelectric state combining neutron diffraction with magnetization measurements on single crystals. In the paramagnetic state at 10 K, polarized neutron diffraction was applied to reveal the components of the susceptibility tensor. The crystal and magnetic structures below the antiferromagnetic transition temperature of $T_N \approx 4$ K were determined using unpolarized neutron diffraction. This data implies no structural phase transition from 10 K down to 2.5 K and is well described within the tetragonal space group $P\bar{4}2_1m$. We found that in zero magnetic field the magnetic space group is either $C_cmc2_1$ or $P_c2_12_12_1$ with antiferromagnetic order along the [110] or [100] directions, respectively, while neighboring spins along the [001] axis are ordered antiferromagnetically. A non-collinear spin arrangement due to small canting within the $ab$ plane is allowed by symmetry and observed experimentally. The ordered moment is found to be 3.24(3) $\mu_B$/Mn$^{2+}$ at 2.5 K and the temperature-field dependent magnetic phase diagram is mapped out by macroscopic magnetization. Distinct differences between the magnetic structure of Ba$_2$MnGe$_2$O$_7$ as compared to those of Ba$_2$CoGe$_2$O$_7$ and Ca$_2$CoSi$_2$O$_7$ are discussed.

cond-mat.str-el↗

arXiv2023

A new dynamical modeling of the WASP-47 system with CHEOPS observations

Among the hundreds of known hot Jupiters (HJs), only five have been found to have companions on short-period orbits. Within this rare class of multiple planetary systems, the architecture of WASP-47 is unique, hosting an HJ (planet -b) with both an inner and an outer sub-Neptunian mass companion (-e and -d, respectively) as well as an additional non-transiting, long-period giant (-c). The small period ratio between planets -b and -d boosts the transit time variation (TTV) signal, making it possible to reliably measure the masses of these planets in synergy with the radial velocity (RV) technique. In this paper, we present new space- and ground-based photometric data of WASP-47b and WASP-47-d, including 11 unpublished light curves from the ESA mission CHEOPS. We analyzed the light curves in a homogeneous way together with all the publicly available data to carry out a global $N$-body dynamical modeling of the TTV and RV signals. We retrieved, among other parameters, a mass and density for planet -d of $M_\mathrm{d}=15.5\pm 0.8$ $M_\oplus$ and $\rho_\mathrm{d}=1.69\pm 0.22$ g\,cm$^{-3}$, which is in good agreement with the literature and consistent with a Neptune-like composition. For the inner planet (-e), we found a mass and density of $M_\mathrm{e}=9.0\pm 0.5$ $M_\oplus$ and $\rho_\mathrm{e}=8.1\pm 0.5$ g\,cm$^{-3}$, suggesting an Earth-like composition close to other ultra-hot planets at similar irradiation levels. Though this result is in agreement with previous RV+TTV studies, it is not in agreement with the most recent RV analysis (at 2.8$\sigma$), which yielded a lower density compatible with a pure silicate composition. This discrepancy highlights the still unresolved issue of suspected systematic offsets between RV and TTV measurements. In this paper, we also significantly improve the orbital ephemerides of all transiting planets, which will be crucial for any future follow-up.

astro-ph.EP↗

arXiv2022

Progress in the development of a KITWPA for the DARTWARS project

DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) is a three years project that aims to develop high-performing innovative Traveling Wave Parametric Amplifiers (TWPAs) for low temperature detectors and qubit readout (C-band). The practical development follows two different promising approaches, one based on the Josephson junctions (TWJPA) and the other one based on the kinetic inductance of a high-resistivity superconductor (KITWPA). This paper presents the advancements made by the DARTWARS collaboration to produce a first working prototype of a KITWPA.

quant-ph↗

arXiv2022

Ultra low noise readout with travelling wave parametric amplifiers: the DARTWARS project

The DARTWARS project has the goal of developing high-performing innovative travelling wave parametric amplifiers with high gain, large bandwidth, high saturation power, and nearly quantum-limited noise. The target frequency region for its applications is 5 - 10 GHz, with an expected noise temperature of about 600 mK. The development follows two different approaches, one based on Josephson junctions and one based on kinetic inductance of superconductors. This contribution mainly focuses on the Josephson travelling wave parametric amplifier, presenting its design, preliminary measurements and the test of homogeneity of arrays of Josephson junctions.

quant-ph↗

arXiv2022

The GAPS Programme at TNG: XXXVI. Measurement of the Rossiter-McLaughlin effect and revising the physical and orbital parameters of the HAT-P-15, HAT-P-17, HAT-P-21, HAT-P-26, HAT-P-29 eccentric planetary systems

Aim: We aim to refine the orbital and physical parameters and determine the sky-projected planet orbital obliquity of five eccentric transiting planetary systems: HAT-P-15, HAT-P-17, HAT-P-21, HAT-P-26, and HAT-P-29. Each of the systems hosts a hot Jupiter, except for HAT-P-26 which hosts a Neptune-mass planet. Methods: We observed transit events of these planets with the HARPS-N spectrograph, obtaining high-precision radial velocity measurements that allow us to measure the Rossiter-McLaughlin effect for each of the target systems. We used these new HARPS-N spectra and archival data, including those from Gaia, to better characterise the stellar atmospheric parameters. The photometric parameters for four of the hot Jupiters were recalculated using 17 new transit light curves, obtained with an array of medium-class telescopes, and data from the TESS space telescope. HATNet time-series photometric data were checked for the signatures of rotation periods of the target stars and their spin axis inclination. Results: From the analysis of the Rossiter-McLaughlin effect, we derived a sky-projected obliquity of 13, -26.3, -0.7, -26 degree for HAT-P-15b, HAT-P-17b, HAT-P-21b and HAT-P-29b, respectively. Due to the quality of the data, we were not able to well constrain the sky-projected obliquity for HAT-P-26b, although a prograde orbit is favoured. The stellar activity of HAT-P-21 indicates a rotation period of 15.88 days, which allowed us to determine its true misalignment angle (25 degree). Our new analysis of the physical parameters of the five exoplanetary systems returned values compatible with those existing in the literature. Using TESS and the available transit light curves, we reviewed the orbital ephemeris for the five systems and confirmed that the HAT-P-26 system shows transit timing variations, which may tentatively be attributed to the presence of a third body.

astro-ph.EP↗

arXiv2021

The PLATO field selection process I. Identification and content of the long-pointing fields

PLATO (PLAnetary Transits and Oscillations of stars) is an ESA M-class satellite planned for launch by end 2026 and dedicated to the wide-field search of transiting planets around bright and nearby stars, with a strong focus on discovering habitable rocky planets hosted by solar-like stars. The choice of the fields to be pointed at is a crucial task since it has a direct impact on the scientific return of the mission. In this paper we describe and discuss the formal requirements and the key scientific prioritization criteria that have to be taken into account in the Long-duration Observation Phase (LOP) field selection, and apply a quantitative metric to guide us in this complex optimization process. We identify two provisional LOP fields, one for each hemisphere (LOPS1, LOPN1), and discuss their properties and stellar content. While additional fine-tuning shall be applied to LOP selection before the definitive choice (to be made two years before launch), we expect their position will not move by more than a few degrees with respect to what is proposed in this paper.

astro-ph.EP↗

arXiv2021

Quasiparticle Interference of the van-Hove singularity in Sr$_2$RuO$_4$

The single-layered ruthenate Sr$_2$RuO$_4$ is one of the most enigmatic unconventional superconductors. While for many years it was thought to be the best candidate for a chiral $p$-wave superconducting ground state, desirable for topological quantum computations, recent experiments suggest a singlet state, ruling out the original $p$-wave scenario. The superconductivity as well as the properties of the multi-layered compounds of the ruthenate perovskites are strongly influenced by a van Hove singularity in proximity of the Fermi energy. Tiny structural distortions move the van Hove singularity across the Fermi energy with dramatic consequences for the physical properties. Here, we determine the electronic structure of the van Hove singularity in the surface layer of Sr$_2$RuO$_4$ by quasiparticle interference imaging. We trace its dispersion and demonstrate from a model calculation accounting for the full vacuum overlap of the wave functions that its detection is facilitated through the octahedral rotations in the surface layer.

cond-mat.str-el↗