arXiv subjects

V. Igochine

Publications and source records attributed to V. Igochine.

5 recordsLinked to original sources

arXiv2026

Flux pumping and bifurcated relaxations of helical core in 3D magnetohydrodynamic modelling of ASDEX Upgrade plasmas

Flux pumping was achieved in recent hybrid scenario experiments in the ASDEX Upgrade (AUG) tokamak, which is characterized by a sawtooth-free helical quiescent state and the anomalous radial redistribution of toroidal current density and poloidal magnetic flux. In this article, the self-regulation mechanism of the AUG core plasma during flux pumping is investigated at realistic parameters using the JOREK code based on the two-temperature, nonlinear, full magnetohydrodynamic (MHD) model. A key milestone in AUG flux pumping modelling is achieved by quantitatively reproducing the clamped current density and safety factor profiles in the plasma core, demonstrating the effectiveness of the dynamo effect in sustaining the flux pumping state. The dynamo term, that is of particular interest, is primarily generated by the pressure-gradient driven m/n = 1/1 quasi-interchange-like MHD instability. The work systematically extrapolates the parameter regimes of flux pumping from the above AUG base case by scanning dissipation coefficients and plasma beta. The simulation results reveal bifurcated plasma behaviours at different Hartmann numbers, including distinct states such as flux pumping (helical core with a flat current density), sawteeth (periodic kink-cycling), single crash (without subsequent cycle), and quasi-stationary magnetic island (peaked current density). Transitions from marginal flux pumping state to sawteeth are observed in long-term simulations. The relationships between system dissipation, plasma beta, and different plasma states are carefully analyzed. For practical purposes, the potential operational window for flux pumping, as determined by plasma density and temperature, is estimated. The modelling efforts advance the understanding of flux pumping and facilitate the development of a fast surrogate model for efficient evaluation of flux pumping.

physics.plasm-ph↗

arXiv2024

Characteristics of the Alfvénic activity during the current quench in ASDEX Upgrade

ASDEX Upgrade has developed multiple massive gas injection (MGI) scenarios to investigate runaway electron (RE) dynamics. During the current quench of the MGI induced disruptions, Alfvénic activity is observed in the 300-800 kHz range. With the help of a mode tracing algorithm based on Fourier spectrograms, mode behaviour was classified for 180 discharges. The modes have been identified as global Alfvén eigenmodes using linear gyrokinetic MHD simulations. Changes in the Alfvén continuum during the quench are proposed as explanation for the strong frequency sweep observed. A systematic statistical analysis shows no significant connection of the mode characteristics to the dynamics of the subsequent runaway electron beams. In our studies, the appearance and amplitude of the modes does not seem to affect the potential subsequent runaway beam. Beyond the scope of the 180 investigated dedicated RE experiments, the Alfvénic activity is also observed in natural disruptions with no RE beam forming.

physics.plasm-ph↗

arXiv2017

Three dimensional boundary displacement due to stable ideal kink modes excited by external n=2 magnetic perturbations

In low-collisionality scenarios exhibiting mitigation of edge localized modes (ELMs), stable ideal kink modes at the edge are excited by externally applied magnetic perturbation (MP)-fields. In ASDEX Upgrade these modes can cause three-dimensional (3D) boundary displacements up to the centimeter range. These displacements have been measured using toroidally localized high resolution diagnostics and rigidly rotating n = 2 MP-fields with various applied poloidal mode spectra. These measurements are compared to non-linear 3D ideal magnetohydrodynamics (MHD) equilibria calculated by VMEC. Comprehensive comparisons have been conducted, which consider for instance plasma movements due to the position control system, attenuation due to internal conductors and changes in the edge pressure profiles. VMEC accurately reproduces the amplitude of the displacement and its dependencies on the applied poloidal mode spectra. Quantitative agreement is found around the low field side (LFS) midplane. The response at the plasma top is qualitatively compared. The measured and predicted displacements at the plasma top maximize when the applied spectra is optimized for ELM-mitigation. The predictions from the vacuum modeling generally fails to describe the displacement at the LFS midplane as well as at the plasma top. When the applied mode spectra is set to maximize the displacement, VMEC and the measurements clearly surpass the predictions from the vacuum modeling by a factor of four. Minor disagreements between VMEC and the measurements are discussed. This study underlines the importance of the stable ideal kink modes at the edge for the 3D boundary displacement in scenarios relevant for ELM-mitigation.

physics.plasm-ph↗

arXiv2016

Experimental investigation of the radial structure of energetic particle driven modes

Alfvén eigenmodes (AEs) and energetic particle modes (EPMs) are often excited by energetic particles (EPs) in tokamak plasmas. One of the main open questions concerning EP driven instabilities is the non-linear evolution of the mode structure. The aim of the present paper is to investigate the properties of beta-induced AEs (BAEs) and EP driven geodesic acoustic modes (EGAMs) observed in the ramp-up phase of off-axis NBI heated ASDEX Upgrade (AUG) discharges. This paper focuses on the changes in the mode structure of BAEs/EGAMs during the non-linear chirping phase. Our investigation has shown that in case of the observed down-chirping BAEs the changes in the radial structure are smaller than the uncertainty of our measurement. This behaviour is most probably the consequence of that BAEs are normal modes, thus their radial structure strongly depends on the background plasma parameters rather than on the EP distribution. In the case of rapidly upward chirping EGAMs the analysis consistently shows shrinkage of the mode structure. The proposed explanation is that the resonance in the velocity space moves towards more passing particles which have narrower orbit widths.

physics.plasm-ph↗

arXiv2013

Power requirements for electron cyclotron current drive and ion cyclotron resonance heating for sawtooth control in ITER

13MW of electron cyclotron current drive (ECCD) power deposited inside the q = 1 surface is likely to reduce the sawtooth period in ITER baseline scenario below the level empirically predicted to trigger neo-classical tearing modes (NTMs). However, since the ECCD control scheme is solely predicated upon changing the local magnetic shear, it is prudent to plan to use a complementary scheme which directly decreases the potential energy of the kink mode in order to reduce the sawtooth period. In the event that the natural sawtooth period is longer than expected, due to enhanced alpha particle stabilisation for instance, this ancillary sawtooth control can be provided from > 10MW of ion cyclotron resonance heating (ICRH) power with a resonance just inside the q = 1 surface. Both ECCD and ICRH control schemes would benefit greatly from active feedback of the deposition with respect to the rational surface. If the q = 1 surface can be maintained closer to the magnetic axis, the efficacy of ECCD and ICRH schemes significantly increases, the negative effect on the fusion gain is reduced, and off-axis negative-ion neutral beam injection (NNBI) can also be considered for sawtooth control. Consequently, schemes to reduce the q = 1 radius are highly desirable, such as early heating to delay the current penetration and, of course, active sawtooth destabilisation to mediate small frequent sawteeth and retain a small q = 1 radius.

physics.plasm-ph↗