Searcharxiv⌕ Search

arXiv subjects

V. Lebedev

Publications and source records attributed to V. Lebedev.

At least 37 records · Page 2Linked to original sources
arXiv2016

Determination of energy of nn-singlet virtual state in d+2H->p+p+n+n reaction

The nn final state interaction has been investigated in d+2H->(pp)S+(nn)S->p+p+n+n reaction going through a formation and breakup of singlet diproton and dineutron in the intermediate state. In the kinematically complete experiment performed at Ed =15 MeV two proton and neutron were detected at angles close to those of emission of (pp)S and (nn)S systems. Simulation of the reaction showed that the shape of neutron energy (timing) spectrum depends on epsnn - the energy of virtual 1S0 state of nn-system. The most likely value epsnn = 0.076 +/- 0.006 MeV was obtained by fitting procedure using the experimental data and simulations. This low value of epsnn evidently indicates on effective enhancement of nn-interaction in the intermediate state of studied reaction

nucl-ex↗
arXiv2016

Study of n-n correlations in d + 2H --> p + p + n + n reaction

A kinematically complete measurement of the four-body breakup reaction d+2H-->2ps+2ns --> p +p +n +n has been performed at 15 MeV deuteron beam of the SINP MSU. The two protons and neutron were detected at angles close to those of emission of 2ps and 2ns systems. The energy of singlet dineutron state was determined by comparing experimental TOF spectrum of breakup neutrons with simulated spectra depending on this energy. A low value Enn = 0.076 +/- 0.006 keV obtained by fitting procedure apparently indicates an effective enhancement of nn-interaction in the intermediate state of studied reaction.

nucl-ex↗
arXiv2016

Inelastic collapse and near-wall localization of randomly accelerated particles

The inelastic collapse of stochastic trajectories of a randomly accelerated particle moving in half-space $z > 0$ has been discovered by McKean and then independently re-discovered by Cornell et. al. The essence of this phenomenon is that particle arrives to a wall at $z = 0$ with zero velocity after an infinite number of inelastic collisions if the restitution coefficient $β$ of particle velocity is smaller than the critical value $β_c=\exp(-π/\sqrt{3})$. We demonstrate that inelastic collapse takes place also in a wide class of models with spatially inhomogeneous random force and, what is more, that the critical value $β_c$ is universal. That class includes an important case of inertial particles in wall-bounded random flows. To establish how the inelastic collapse influence the particle distribution, we construct an exact equilibrium probability density function $ρ(z,v)$ for particle position and velocity. The equilibrium distribution exists only at $β<β_c$ and indicates that inelastic collapse does not necessarily mean the near-wall localization.

nlin.CD↗
arXiv2016

Instability of a witness bunch in a plasma bubble

The stability of a trailing witness bunch, accelerated by a plasma wake accelerator (PWA) in a blow-out regime, is discussed. The instability growth rate as well as the energy spread, required for BNS damping, are obtained. A relationship between the PWA power efficiency and the BNS energy spread is derived.

physics.acc-ph↗
arXiv2015

Electron lenses and cooling for the Fermilab Integrable Optics Test Accelerator

Recently, the study of integrable Hamiltonian systems has led to nonlinear accelerator lattices with one or two transverse invariants and wide stable tune spreads. These lattices may drastically improve the performance of high-intensity machines, providing Landau damping to protect the beam from instabilities, while preserving dynamic aperture. The Integrable Optics Test Accelerator (IOTA) is being built at Fermilab to study these concepts with 150-MeV pencil electron beams (single-particle dynamics) and 2.5-MeV protons (dynamics with self fields). One way to obtain a nonlinear integrable lattice is by using the fields generated by a magnetically confined electron beam (electron lens) overlapping with the circulating beam. The required parameters are similar to the ones of existing devices. In addition, the electron lens will be used in cooling mode to control the brightness of the proton beam and to measure transverse profiles through recombination. More generally, it is of great interest to investigate whether nonlinear integrable optics allows electron coolers to exceed limitations set by both coherent or incoherent instabilities excited by space charge.

physics.acc-ph↗
arXiv2015

A Storage Ring Experiment to Detect a Proton Electric Dipole Moment

A new experiment is described to detect a permanent electric dipole moment of the proton with a sensitivity of $10^{-29}e\cdot$cm by using polarized "magic" momentum $0.7$~GeV/c protons in an all-electric storage ring. Systematic errors relevant to the experiment are discussed and techniques to address them are presented. The measurement is sensitive to new physics beyond the Standard Model at the scale of 3000~TeV.

physics.acc-ph↗
arXiv2014

Status and Opportunities at Project X: A Multi-MW Facility for Intensity Frontier Research

Project X is a multi-megawatt proton facility being developed to support a world-leading program in Intensity Frontier physics at Fermilab. The facility will support programs in elementary particle and nuclear physics, with the potential for broader applications in materials and energy research. Project X is in the development stage with a R&D program focused on front end and superconducting RF acceleration technologies, and with design concepts for a staged implementation. This paper will review the status of the Project X conceptual development and the associated R&D programs.

physics.acc-ph↗
arXiv2014

Issues and R&D Required for the Intensity Frontier Accelerators

Operation, upgrade and development of accelerators for Intensity Frontier face formidable challenges in order to satisfy both the near-term and long-term Particle Physics program. Here we discuss key issues and R&D required for the Intensity Frontier accelerators.

physics.acc-ph↗
arXiv2014

The Project-x Injector Experiment: A Novel High Performance Front-end For A Future High Power Proton Facility At Fermilab

A multi-MW proton facility, Project X, has been proposed and is currently under development at Fermilab. We are carrying out a program of research and development aimed at integrated systems testing of critical components comprising the front end of Project X. This program, known as the Project X Injector Experiment (PXIE), is being undertaken as a key component of the larger Project X R&D program. The successful completion of this program will validate the concept for the Project X front end, thereby minimizing a primary technical risk element within Project X. PXIE is currently under construction at Fermilab and will be completed over the period FY12-17. PXIE will include an H- ion source, a CW 2.1-MeV RFQ and two superconductive RF (SRF) cryomodules providing up to 25 MeV energy gain at an average beam current of 1 mA (upgradable to 2 mA). Successful systems testing will also demonstrate the viability of novel front end technologies that are expected find applications beyond Project X.

physics.acc-ph↗
arXiv2014

Self-assembled Zeeman slower based on spherical permanent magnets

We present a novel type of longitudinal Zeeman slower. The magnetic field profile is generated by a 3D array of permanent spherical magnets, which are self-assembled into a stable structure. The simplicity and stability of the design make it quick to assemble and inexpensive. In addition, as with other permanent magnet slowers, no electrical current or water cooling is required. We describe the theory, assembly, and testing of this new design.

physics.atom-ph↗
arXiv2014

Superimposed Codes and Threshold Group Testing

We will discuss superimposed codes and non-adaptive group testing designs arising from the potentialities of compressed genotyping models in molecular biology. The given paper was motivated by the 30th anniversary of D'yachkov-Rykov recurrent upper bound on the rate of superimposed codes published in 1982. We were also inspired by recent results obtained for non-adaptive threshold group testing which develop the theory of superimposed codes

cs.IT↗
arXiv2013

Project X: Accelerator Reference Design

Part 1 of "Project X: Accelerator Reference Design, Physics Opportunities, Broader Impacts". Part 1 contains the volume Preface and a description of the conceptual design for a high-intensity proton accelerator facility being developed to support a world-leading program of Intensity Frontier physics over the next two decades at Fermilab. Subjects covered include performance goals, the accelerator physics design, and the technological basis for such a facility. Part 2 is available as arXiv:1306.5009 [hep-ex] and Part 3 is available as arXiv:1306.5024 [physics.acc-ph].

physics.acc-ph↗
arXiv2013

Observation of Instabilities of Coherent Transverse Ocillations in the Fermilab Booster

The Fermilab Booster - built more than 40 years ago - operates well above the design proton beam intensity of 4x10**12 ppp. Still, the Fermilab neutrino experiments call for even higher intensity of 5.5x10**12 ppp. A multitude of intensity related effects must be overcome in order to meet this goal including suppression of coherent dipole instabilities of transverse oscillations which manifest themselves as a sudden drop in the beam current. In this report we present the results of observation of these instabilities at different tune, coupling and chromaticity settings and discuss possible cures.

physics.acc-ph↗
arXiv2013

Design of MEBT for the Project X Injector Experiment at Fermilab

The Project X Injector Experiment (PXIE), a test bed for the Project X front end, will be completed at Fermilab at FY12-16. One of the challenging goals of PXIE is demonstration of the capability to form a 1 mA H- beam with an arbitrary selected bunch pattern from the initially 5 mA 162.5 MHz CW train. The bunch selection will be made in the Medium Energy Beam Transport (MEBT) at 2.1 MeV by diverting undesired bunches to an absorber. This paper presents the MEBT scheme and describes development of its elements, including the kickers and absorber.

physics.acc-ph↗
arXiv2013

Progress with PXIE MEBT Chopper

A capability to provide a large variety of bunch patterns is crucial for the concept of the Project X serving MW-range beam to several experiments simultaneously. This capability will be realized by the Medium Energy Beam Transport's (MEBT) chopping system that will divert 80% of all bunches of the initially 5mA, 2.1 MeV CW 162.5 MHz beam to an absorber according to a pre-programmed bunch-by-bunch selection. Being considered one of the most challenging components, the chopping system will be tested at the Project X Injector Experiment (PXIE) facility that will be built at Fermilab as a prototype of the Project X front end. The bunch deflection will be made by two identical sets of travelling-wave kickers working in sync. Currently, two versions of the kickers are being investigated: a helical 200 Ohm structure with a switching-type 500 V driver and a planar 50 Ohm structure with a linear 250 V amplifier. This paper will describe the chopping system scheme and functional specifications for the kickers, present results of electromagnetic measurements of the models, discuss possible driver schemes, and show a conceptual mechanical design.

physics.acc-ph↗
arXiv2012

Simulation of Beam-Beam Effects and Tevatron Experience

Effects of electromagnetic interactions of colliding bunches in the Tevatron had a variety of manifestations in beam dynamics presenting vast opportunities for development of simulation models and tools. In this paper the computer code for simulation of weak-strong beam-beam effects in hadron colliders is described. We report the collider operational experience relevant to beam-beam interactions, explain major effects limiting the collider performance and compare results of observations and measurements with simulations.

physics.acc-ph↗