arXiv subjects

V. M. Mostepanenko

Publications and source records attributed to V. M. Mostepanenko.

At least 199 records · Page 11Linked to original sources

arXiv2006

Comment on "On the temperature dependence of the Casimir effect"

Recently, Brevik et al. [Phys. Rev. E 71, 056101 (2005)] adduced arguments against the traditional approach to the thermal Casimir force between real metals and in favor of one of the alternative approaches. The latter assumes zero contribution from the transverse electric mode at zero frequency in qualitative disagreement with unity as given by the thermal quantum field theory for ideal metals. Those authors claim that their approach is consistent with experiments as well as with thermodynamics. We demonstrate that these conclusions are incorrect. We show specifically that their results are contradicted by four recent experiments and also violate the third law of thermodynamics (the Nernst heat theorem).

quant-ph↗

arXiv2006

Universal behavior of dispersion forces between two dielectric plates in the low-temperature limit

The universal analytic expressions in the limit of low temperatures (short separations) are obtained for the free energy, entropy and pressure between the two parallel plates made of any dielectric. The analytical proof of the Nernst heat theorem in the case of dispersion forces acting between dielectrics is provided. This permitted us to formulate the stringent thermodynamical requirement that must be satisfied in all models used in the Casimir physics.

quant-ph↗

arXiv2006

Casimir-Polder interaction between an atom and a cylinder with application to nanosystems

Recently the Lifshitz theory of dispersion forces was extended for the case of an atom (molecule) interacting with a plane surface of a uniaxial crystal or with a long solid cylinder or cylindrical shell made of isotropic material or uniaxial crystal. The obtained results are applicable to nanosystems. In particular, we investigate the Casimir-Polder interaction between hydrogen atoms (molecules) and multi-wall carbon nanotubes. It is demonstrated that the hydrogen atoms located inside multiwall carbon nanotubes have a lower free energy compared to those located outside. We also perform comparison studies of the interaction of hydrogen atoms between themselves and with multi-wall carbon nanotube. The obtained results are important for the problem of hydrogen storage.

quant-ph↗

arXiv2006

Dependences of the Casimir-Polder interaction between an atom and a cavity wall on atomic and material properties

The Casimir-Polder and van der Waals interactions between an atom and a flat cavity wall are investigated under the influence of real conditions including the dynamic polarizability of the atom, actual conductivity of the wall material and nonzero temperature of the wall. The cases of different atoms near metal and dielectric walls are considered. It is shown that to obtain accurate results for the atom-wall interaction at short separations, one should use the complete tabulated optical data for the complex refractive index of the wall material and the accurate dynamic polarizability of an atom. At relatively large separations in the case of a metal wall, one may use the plasma model dielectric function to describe the dielectric properties of wall material. The obtained results are important for the theoretical interpretation of experiments on quantum reflection and Bose-Einstein condensation.

quant-ph↗

arXiv2005

Rigorous approach to the comparison between experiment and theory in Casimir force measurements

In most experiments on the Casimir force the comparison between measurement data and theory was done using the concept of the root-mean-square deviation, a procedure that has been criticized in literature. Here we propose a special statistical analysis which should be performed separately for the experimental data and for the results of the theoretical computations. In so doing, the random, systematic, and total experimental errors are found as functions of separation, taking into account the distribution laws for each error at 95% confidence. Independently, all theoretical errors are combined to obtain the total theoretical error at the same confidence. Finally, the confidence interval for the differences between theoretical and experimental values is obtained as a function of separation. This rigorous approach is applied to two recent experiments on the Casimir effect.

quant-ph↗

arXiv2005

Present status of controversies regarding the thermal Casimir force

It is well known that, beginning in 2000, the behavior of the thermal correction to the Casimir force between real metals has been hotly debated. As was shown by several research groups, the Lifshitz theory, which provides the theoretical foundation for the calculation of both the van der Waals and Casimir forces, leads to different results depending on the model of metal conductivity used. To resolve these controversies, the theoretical considerations based on the principles of thermodynamics and new experimental tests were invoked. We analyze the present status of the problem (in particular, the advantages and disadvantages of the approaches based on the surface impedance and on the Drude model dielectric function) using rigorous analytical calculations of the entropy of a fluctuating field. We also discuss the results of a new precise experiment on the determination of the Casimir pressure between two parallel plates by means of a micromechanical torsional oscillator.

quant-ph↗

arXiv2005

Thermal quantum field theory and the Casimir interaction between dielectrics

The Casimir and van der Waals interaction between two dissimilar thick dielectric plates is reconsidered on the basis of thermal quantum field theory in Matsubara formulation. We briefly review two main derivations of the Lifshitz formula in the framework of thermal quantum field theory without use of the fluctuation-dissipation theorem. A set of special conditions is formulated under which these derivations remain valid in the presence of dissipation. The low-temperature behavior of the Casimir and van der Waals interactions between dissimilar dielectrics is found analytically from the Lifshitz theory for both an idealized model of dilute dielectrics and for real dielectrics with finite static dielectric permittivities. The free energy, pressure and entropy of the Casimir and van der Waals interactions at low temperatures demonstrate the same universal dependence on the temperature as was previously discovered for ideal metals. The entropy vanishes when temperature goes to zero proving the validity of the Nernst heat theorem. This solves the long-standing problem on the consistency of the Lifshitz theory with thermodynamics in the case of dielectric plates. The obtained asymptotic expressions are compared with numerical computations for both dissimilar and similar real dielectrics and found to be in excellent agreement. The role of the zero-frequency term in Matsubara sum is investigated in the case of dielectric plates. It is shown that the inclusion of conductivity in the model of dielectric response leads to the violation of the Nernst heat theorem. The applications of this result to the topical problems of noncontact atomic friction and the Casimir interaction between real metals are discussed.

quant-ph↗

arXiv2005

Thermal corrections in Casimir interaction between metal and dielectric

The Casimir interaction between two thick parallel plates, one made of metal and the other of dielectric, is investigated at nonzero temperature. It is shown that in some temperature intervals the Casimir pressure and the free energy of a fluctuating field are the nonmonotonous functions of temperature and the respective Casimir entropy can be negative. The physical interpretation for these conclusions is given. At the same time we demonstrate that the entropy vanishes when the temperature goes to zero, i.e., in the Casimir interaction between metal and dielectric the Nernst heat theorem is satisfied. The investigation is performed both analytically, by using the model of an ideal metal and dilute dielectric or dielectric with a frequency-independent dielectric permittivity, and numerically for real metal (Au) and dielectrics with different behavior of the dielectric permittivity along the imaginary frequency axis (Si and Al_2O_3).

quant-ph↗

arXiv2005

Investigation of the Casimir force between metal and semiconductor test bodies

The measurement of the Casimir force between a large gold coated sphere and single crystal silicon plate is performed with an atomic force microscope. A rigorous statistical comparison of data with theory is done, without use of the concept of root-mean-square deviation, and excellent agreement is obtained. The Casimir force between metal and semiconductor is demonstrated to be significantly different than between two similar or dissimilar metals.

quant-ph↗

arXiv2005

Casimir Effect as a Test for Thermal Corrections and Hypothetical Long-Range Interactions

We have performed a precise experimental determination of the Casimir pressure between two gold-coated parallel plates by means of a micromachined oscillator. In contrast to all previous experiments on the Casimir effect, where a small relative error (varying from 1% to 15%) was achieved only at the shortest separation, our smallest experimental error ($\sim 0.5$%) is achieved over a wide separation range from 170 nm to 300 nm at 95% confidence. We have formulated a rigorous metrological procedure for the comparison of experiment and theory without resorting to the previously used root-mean-square deviation, which has been criticized in the literature. This enables us to discriminate among different competing theories of the thermal Casimir force, and to resolve a thermodynamic puzzle arising from the application of Lifshitz theory to real metals. Our results lead to a more rigorous approach for obtaining constraints on hypothetical long-range interactions predicted by extra-dimensional physics and other extensions of the Standard Model. In particular, the constraints on non-Newtonian gravity are strengthened by up to a factor of 20 in a wide interaction range at 95% confidence.

quant-ph↗

arXiv2005

Precise comparison of theory and new experiment for the Casimir force leads to stronger constraints on thermal quantum effects and long-range interactions

We report an improved dynamic determination of the Casimir pressure between two plane plates obtained using a micromachined torsional oscillator. The main improvements in the current experiment are a significant suppression of the surface roughness of the Au layers deposited on the interacting surfaces, and a decrease in the experimental error in the measurement of the absolute separation. A metrological analysis of all data permitted us to determine both the random and systematic errors, and to find the total experimental error as a function of separation at the 95% confidence level. In contrast to all previous experiments on the Casimir effect, our smallest experimental error ($\sim 0.5$%) is achieved over a wide separation range. The theoretical Casimir pressures in the experimental configuration were calculated by the use of four theoretical approaches suggested in the literature. All corrections to the Casimir force were calculated or estimated. All theoretical errors were analyzed and combined to obtain the total theoretical error at the 95% confidence level. Finally, the confidence interval for the differences between theoretical and experimental pressures was obtained as a function of separation. Our measurements are found to be consistent with two theoretical approaches utilizing the plasma model and the surface impedance over the entire measurement region. Two other approaches to the thermal Casimir force, utilizing the Drude model or a special prescription for the determination of the zero-frequency contribution to the Lifshitz formula, are excluded on the basis of our measurements at the 99% and 95% confidence levels, respectively. Finally, constraints on Yukawa-type hypothetical interactions are strengthened by up to a factor of 20 in a wide interaction range.

quant-ph↗

arXiv2005

Van der Waals interaction between microparticle and uniaxial crystal with application to hydrogen atoms and multiwall carbon nanotubes

The Lifshitz theory of the van der Waals force is extended for the case of an atom (molecule) interacting with a plane surface of an uniaxial crystal or with a long solid cylinder or cylindrical shell made of isotropic material or uniaxial crystal. For a microparticle near a semispace or flat plate made of an uniaxial crystal the exact expressions for the free energy of the van der Waals and Casimir-Polder interaction are presented. An approximate expression for the free energy of microparticle- cylinder interaction is obtained which becomes precise for microparticle-cylinder separations much smaller than cylinder radius. The obtained expressions are used to investigate the van der Waals interaction between hydrogen atoms (molecules) and graphite plates or multiwall carbon nanotubes. To accomplish this the behavior of graphite dielectric permittivities along the imaginary frequency axis is found using the optical data for the complex refractive index of graphite for the ordinary and extraordinary rays. It is shown that the position of hydrogen atoms inside multiwall carbon nanotubes is energetically preferable compared with outside.

quant-ph↗

arXiv2005

Some Mathematical Aspects of the Lifshitz Formula for the Thermal Casimir Force

The applicability of the Lifshitz formula is discussed to the case of two thick parallel plates made of real metal. The usual description of the zero-point vacuum oscillations on the background of the frequency-dependent dielectric permittivity is shown to be in contradiction with thermodynamics. Instead, the Lifshitz formula for the Casimir free energy should be reformulated in terms of the reflection coefficients containing the surface impedance instead of the dielectric permittivity. This approach is presently confirmed experimentally by precision measurements of the van der Waals and Casimir forces in micromechanical systems and it is in agreement with thermodynamics.

quant-ph↗

arXiv2005

Dependences of the van der Waals atom-wall interaction on atomic and material properties

The 1%-accurate calculations of the van der Waals interaction between an atom and a cavity wall are performed in the separation region from 3 nm to 150 nm. The cases of metastable He${}^{\ast}$ and Na atoms near the metal, semiconductor or dielectric walls are considered. Different approximations to the description of wall material and atomic dynamic polarizability are carefully compared. The smooth transition to the Casimir-Polder interaction is verified. It is shown that to obtain accurate results for the atom-wall van der Waals interaction at shortest separations with an error less than 1% one should use the complete optical tabulated data for the complex refraction index of the wall material and the accurate dynamic polarizability of an atom. The obtained results may be useful for the theoretical interpretation of recent experiments on quantum reflection and Bose-Einstein condensation of ultracold atoms on or near surfaces of different nature.

quant-ph↗

arXiv2004

On the control of the lateral Casimir force between corrugated surfaces

The general perturbative expression for the lateral Casimir force between two plates covered by longitudinal corrugations of arbitrary shape is obtained. This expression is applicable for corrugation periods larger than the separation distance. The cases of asymmetric corrugations are considered, which allow to increase the maximum to minimum force ratio and affect the character of equilibrium points. This opens new opportunities to control the lateral Casimir forces for use in microelectromechanical devices based entirely on the vacuum fluctuation properties.

quant-ph↗

arXiv2004

Casimir-Polder interaction between an atom and a cavity wall under the influence of real conditions

The Casimir-Polder interaction between an atom and a metal wall is investigated under the influence of real conditions including the dynamic polarizability of the atom, finite conductivity of the wall metal and nonzero temperature of the system. Both analytical and numerical results for the free energy and force are obtained over a wide range of the atom-wall distances. Numerical computations are performed for an Au wall and metastable He${}^{\ast}$, Na and Cs atoms. For the He${}^{\ast}$ atom we demonstrate, as an illustration, that at short separations of about the Au plasma wavelength at room temperature the free energy deviates up to 35% and the force up to 57% from the classical Casimir-Polder result. Accordingly, such large deviations should be taken into account in precision experiments on atom-wall interactions. The combined account of different corrections to the Casimir-Polder interaction leads to the conclusion that at short separations the corrections due to the dynamic polarizability of an atom play a more important role than -- and suppress -- the corrections due to the nonideality of the metal wall. By the comparison of the exact atomic polarizabilities with those in the framework of the single oscillator model, it is shown that the obtained asymptotic expressions enable calculation of the free energy and force for the atom-wall interaction under real conditions with a precision of one percent.

quant-ph↗

arXiv2004

Theory confronts experiment in the Casimir force measurements: quantification of errors and precision

We compare theory and experiment in the Casimir force measurement between gold surfaces performed with the atomic force microscope. Both random and systematic experimental errors are found leading to a total absolute error equal to 8.5 pN at 95% confidence. In terms of the relative errors, experimental precision of 1.75% is obtained at the shortest separation of 62 nm at 95% confidence level (at 60% confidence the experimental precision of 1% is confirmed at the shortest separation). An independent determination of the accuracy of the theoretical calculations of the Casimir force and its application to the experimental configuration is carefully made. Special attention is paid to the sample-dependent variations of the optical tabulated data due to the presence of grains, contribution of surface plasmons, and errors introduced by the use of the proximity force theorem. Nonmultiplicative and diffraction-type contributions to the surface roughness corrections are examined. The electric forces due to patch potentials resulting from the polycrystalline nature of the gold films are estimated. The finite size and thermal effects are found to be negligible. The theoretical accuracy of about 1.69% and 1.1% are found at a separation 62 nm and 200 nm, respectively. Within the limits of experimental and theoretical errors very good agreement between experiment and theory is confirmed characterized by the root mean square deviation of about 3.5 pN within all measurement range. The conclusion is made that the Casimir force is stable relative to variations of the sample-dependent optical and electric properties, which opens new opportunities to use the Casimir effect for diagnostic purposes.

quant-ph↗

arXiv2004

Violation of the Nernst heat theorem in the theory of thermal Casimir force between Drude metals

We give a rigorous analytical derivation of low-temperature behavior of the Casimir entropy in the framework of the Lifshitz formula combined with the Drude dielectric function. An earlier result that the Casimir entropy at zero temperature is not equal to zero and depends on the parameters of the system is confirmed, i.e. the third law of thermodynamics (the Nernst heat theorem) is violated. We illustrate the resolution of this thermodynamical puzzle in the context of the surface impedance approach by several calculations of the thermal Casimir force and entropy for both real metals and dielectrics. Different representations for the impedances, which are equivalent for real photons, are discussed. Finally, we argue in favor of the Leontovich boundary condition which leads to results for the thermal Casimir force that are consistent with thermodynamics.

quant-ph↗