V. Mayatski | Searcharxiv

arXiv2004

Long sandwich modules for photon veto detectors

Long lead-scintillator sandwich modules developed for the BNL experiment KOPIO are described. The individual 4 m long module consists of 15 layers of 7 mm thick extruded scintillator and 15 layers of 1 mm lead absorber. Readout is implemented via WLS fibers glued into grooves in a scintillator with 7 mm spacing and viewed from both ends by the phototubes. Time resolution of 300 ps for cosmic MIPs was obtained. Light output stability monitored for 2 years shows no degradation beyond the measurement errors. A 4 m long C-bent sandwich module was also manufactured and tested.

physics.ins-det↗

arXiv2002

Photon sandwich detectors with WLS fiber readout

A photon detector for BNL experiment E949 is described. The detector consists of lead/scintillator ``sandwich'' of 25 layers of 5 mm thick scintillator BC404 and 24 layers of 2 mm lead absorber. Readout is implemented with 30-60 cm long WLS fibers (BCF99-29AA) glued into grooves in the BC404. Average yield was measured with cosmic rays to be about 43 p.e./MeV. Extruded plastic scintillation counters developed for sandwich detectors of photons for the KOPIO experiment are also described. For a 7 mm thick counter with 4.3 m long WLS fibers spaced at 7 mm a light yield of 18.7 p.e./MeV and time resolution of 0.71 ns were obtained. A prototype photon veto module consisting of 10 layers of 7 mm thick extruded plastic slabs interleaved with 1 mm lead sheets was tested.

physics.ins-det↗