arXiv subjects

V. Paramonov

Publications and source records attributed to V. Paramonov.

3 recordsLinked to original sources

arXiv2021

Design studies of a continuous-wave normal conducting buncher for European X-FEL

A three-cell 1.3 GHz, Normal Conducting (NC) buncher is designed for a possible future upgrade of the European XFEL to operate in a continuous-wave (CW) / long pulse (LP) mode. The RF geometry of the buncher is optimized for high shunt impedance, large mode separation as well as multipacting free in the operation range. The bunchersupport cavity voltage of 400 kV with an RF power dissipation of 14 kW. A tapered waveguide-based RF power coupler is designed to feed the RF power to the buncher. The RF power coupler port is optimized for field asymmetry compensation. The thermal load due to RF power dissipation is analyzed using Multiphysics simulations in CST and a simplified cooling scheme is designed.

physics.acc-ph↗

arXiv2018

Procedure of simulations for Evaluations of Transient Parameters Stability for RF Cavities Due to Effects of Pulsed RF Heating

The Pulsed RF Heating (PRFH) is the well known effect in the development of high gradient accelerating cavities. There is a lot of research dedicated to the tolerable strength of electromagnetic field and the corresponding temperature rise leading to the surface degradation and cavity performance violation. To provide high quality of electron bunches, RF gun cavities operate in electron sources with high electric, and hence, magnetic RF fields. Being at the safe side with respect to cavity surface degradation, related to the PRFH result for S band in essentially transient thermal deformations, leading to the cavity frequency shift and quality factor change even within a few microseconds in the RF pulse. Thermo-elastic deformations consist of slow heat propagation from the cavity surface and fast elastic wave propagation from the very thin heated surface layer inside the cavity body with different in five orders typical velocities. For simulations of PRFH effects for more or less practical cavity design we can get results only in direct numerical simulations with certified software like ANSYS. The critical issue for such direct simulations is to combine in a single model the possibility of correct description for such qualitatively different process and to prove the reasonable precision of simulations. This report describes the procedure for simulation of PRFH related transient thermo-elastic deformations in S band cavities. The results of test simulations are presented to show the relative precision of simulations.

physics.acc-ph↗

arXiv2013

Parameters of the Disk Loaded Waveguide structure for intermediate particles acceleration in the intermediate energy range

The Disk Loaded Waveguide (DLW) is the mostly used high frequency structure for acceleration of lightweight particles - electrons in the high energy range. In some physical experiments acceleration of more heavy particles - muons to medium energies is required. DLW parameters are considered for particle velocity 0.04 < β< 1 both for the fundamental and the nearest backward spatial harmonics. Physical and technical restrictions for DLW application in the low βrange and lower frequency (the L-band range) are analyzed. Basing on particularities of acceleration with Traveling Wave (TW) mode, deep optimization of DLW cells dimensions, the choice of optimal operating phase advance for DLW section and combination of forward and backward TW modes, it is possible to create simple, cost effective acceleration system for acceleration in the velocity range 0.2 < β< 1 for intermediate particles, in some parameters overcoming accelerating system with RF cavities in Standing Wave (SW) mode. Design criteria are discussed and examples of possible accelerating systems are presented.

physics.acc-ph↗