Searcharxiv⌕ Search

arXiv subjects

V. Pierro

Publications and source records attributed to V. Pierro.

At least 19 recordsLinked to original sources
arXiv2026

Experimental Realization of Optimized Ternary Mirror Coatings

We report on the first experimental realization of multi-material dielectric mirror coatings designed through a multi-objective optimization algorithm to simultaneously minimize thermal noise and optical losses. We validate this design strategy by fabricating and characterizing two distinct ternary systems: a SiNx -based proof-of-concept and a Ti:GeO2 -based system targeting lower optical losses. The performance of the SiN x coating shows remarkable agreement with predictions, demonstrating a noise amplitude spectral density reduction of 0.82 with respect to current reference coatings, and validating our design-to-fabrication pipeline. The Ti:GeO2 -based system achieves the crucial goal of sub-ppm absorption; its measured thermal noise, however, is higher than the theoretically predicted level of 0.71, extrapolated from single-layer material characterization. A dedicated tolerance analysis confirms that this discrepancy is not attributable to random thickness errors, emphasizing that further studies of the manufacturing process are needed to fully exploit this combination of materials. This work establishes a robust methodology for producing complex, high-performance optical coatings tailored for precision experiments.

physics.optics↗
arXiv2024

Development of ion-beam sputtered silicon nitride thin films for low-noise mirror coatings of gravitational-wave detectors

Brownian thermal noise of thin-film coatings is a fundamental limit for high-precision experiments based on optical resonators such as gravitational-wave interferometers. Here we present the results of a research activity aiming to develop lower-noise ion-beam sputtered silicon nitride thin films compliant with the very stringent requirements on optical loss of gravitational-wave interferometers. In order to test the hypothesis of a correlation between the synthesis conditions of the films and their elemental composition and optical and mechanical properties, we varied the voltage, current intensity and composition of the sputtering ion beam, and we performed a broad campaign of characterizations. While the refractive index was found to monotonically depend on the beam voltage and linearly vary with the N/Si ratio, the optical absorption appeared to be strongly sensitive to other factors, as yet unidentified. However, by systematically varying the deposition parameters, an optimal working point was found. Thus we show that the loss angle and extinction coefficient of our thin films can be as low as $(1.0 \pm 0.1) \times 10^{-4}$ rad at $\sim$2.8 kHz and $(6.4 \pm 0.2) \times 10^{-6}$ at 1064 nm, respectively, after thermal treatment at 900 $^{\circ}$C. To the best of our knowledge, such loss angle value is the lowest ever measured on this class of thin films. We then used our silicon nitride thin films to design and produce a multi-material mirror coating showing a thermal noise amplitude of $(10.3 \pm 0.2) \times 10^{-18}$ m Hz$^{-1/2}$ at 100 Hz, which is 25\% lower than in current mirror coatings of the Advanced LIGO and Advanced Virgo interferometers, and an optical absorption as low as $(1.6 \pm 0.5)$ parts per million at 1064 nm.

physics.ins-det↗
arXiv2023

Negative differential resistance in Josephson junctions coupled to a cavity

Regions with negative differential resistance can arise in the IV curve of Josephson junctions and this phenomenon plays an essential role for applications, in particular for THz radiation emission. For the measurement of high frequency radiation from Josephson junctions, a cavity - either internal or external - is often used. A cavity may also induce a negative differential resistance region at the lower side of the resonance frequency. We investigate the dynamics of Josephson junctions with a negative differential resistance in the quasi particle tunnel current, i.e. in the McCumber curve. We find that very complicated and unexpected interactions take place. This may be useful for the interpretation of experimental measurements of THz radiation from intrinsic Josephson junctions.

cond-mat.supr-con↗
arXiv2022

Progress in the development of a KITWPA for the DARTWARS project

DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) is a three years project that aims to develop high-performing innovative Traveling Wave Parametric Amplifiers (TWPAs) for low temperature detectors and qubit readout (C-band). The practical development follows two different promising approaches, one based on the Josephson junctions (TWJPA) and the other one based on the kinetic inductance of a high-resistivity superconductor (KITWPA). This paper presents the advancements made by the DARTWARS collaboration to produce a first working prototype of a KITWPA.

quant-ph↗
arXiv2022

Ultra low noise readout with travelling wave parametric amplifiers: the DARTWARS project

The DARTWARS project has the goal of developing high-performing innovative travelling wave parametric amplifiers with high gain, large bandwidth, high saturation power, and nearly quantum-limited noise. The target frequency region for its applications is 5 - 10 GHz, with an expected noise temperature of about 600 mK. The development follows two different approaches, one based on Josephson junctions and one based on kinetic inductance of superconductors. This contribution mainly focuses on the Josephson travelling wave parametric amplifier, presenting its design, preliminary measurements and the test of homogeneity of arrays of Josephson junctions.

quant-ph↗
arXiv2021

Detector Array Readout with Traveling Wave Amplifiers

Noise at the quantum limit over a large bandwidth is a fundamental requirement for future applications operating at millikelvin temperatures, such as the neutrino mass measurement, the next-generation x-ray observatory, the CMB measurement, the dark matter and axion detection, and the rapid high-fidelity readout of superconducting qubits. The read out sensitivity of arrays of microcalorimeter detectors, resonant axion-detectors, and qubits, is currently limited by the noise temperature and bandwidth of the cryogenic amplifiers. The DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) project has the goal of developing high-performing innovative traveling wave parametric amplifiers (TWPAs) with a high gain, a high saturation power, and a quantum-limited or nearly quantum-limited noise. The practical development follows two different promising approaches, one based on the Josephson junctions and the other one based on the kinetic inductance of a high-resistivity superconductor. In this contribution we present the aims of the project, the adopted design solutions and preliminary results from simulations and measurements.

cond-mat.supr-con↗
arXiv2021

Bimodal Approach for Noise Figures of Merit Evaluation in Quantum-Limited Josephson Traveling Wave Parametric Amplifiers

The advent of ultra-low noise microwave amplifiers revolutionized several research fields demanding quantum-limited technologies. Exploiting a theoretical bimodal description of a linear phase-preserving amplifier, in this contribution we analyze some of the intrinsic properties of a model architecture (i.e., an rf-SQUID based Josephson Traveling Wave Parametric Amplifier) in terms of amplification and noise generation for key case study input states (Fock and coherents). Furthermore, we present an analysis of the output signals generated by the parametric amplification mechanism when thermal noise fluctuations feed the device.

cond-mat.supr-con↗
arXiv2020

Ternary Quarter Wavelength Coatings for Gravitational Wave Detector Mirrors: Design Optimization via Exhaustive Search

Multimaterial optical coatings are a promising viable option to meet the challenging requirements (in terms of transmittance, absorbance and thermal noise) of next generation gravitational wave detector mirrors. In this paper we focus on ternary coatings consisting of quarter-wavelength thick layers, where a third material (H') is added to the two presently in use, namely Silica (L) and Titania-doped Tantala (H), featuring higher dielectric contrast (against Silica), and lower thermal noise (compared to Titania-doped Tantala), but higher optical losses. We seek the optimal material sequences, featuring minimal thermal (Brownian) noise under prescribed transmittance and absorbance constraints, by exhaustive simulation over all possible configurations, for different values (in a meaningful range) of the optical density and extinction coefficient of the third material. In all cases studied, the optimal designs consist of a stack of (H'|L) doublets topped by a stack of (H|L) doublets, confirming previous heuristic assumptions, and the achievable coating noise power spectral density reduction factor is \sim 0.5. The robustness of the found optimal designs against layer thickness deposition errors and uncertainties and/or fluctuations in the optical losses of the third material is also investigated. Possible margins for further thermal noise reduction by layer thickness optimization, and strategies to implement it, are discussed.

physics.optics↗
arXiv2019

On the performance limits of coatings for gravitational wave detectors made of alternating layers of two materials

The coating design for mirrors used in interferometric detectors of gravitational waves currently consists of stacks of two alternating dielectric materials with different refractive indexes. In order to explore the performance limits of such coatings, we have formulated and solved the design problem as a multiobjective optimization problem consisting of the minimization of both coating transmittance and thermal noise. An algorithm of global optimization (Borg MOEA) has been used without any a priori assumption on the number and thicknesses of the layers in the coating. The algorithm yields to a Pareto tradeoff boundary exhibiting a continuous, decreasing and non convex (bump-like) profile, bounded from below by an exponential curve which can be written in explicit closed form in the transmittance-noise plane. The lower bound curve has the same expression of the relation between transmittance and noise for the quarter wavelength design where the noise coefficient of the high refractive index material assumes a smaller equivalent value. An application of this result allowing to reduce the computational burden of the search procedure is reported and discussed.

astro-ph.IM↗
arXiv2017

Switching Times in Fabry-Perot Measurements

We show how to analyze the motion of very low dissipation suspended mirrors in a Fabry-Perot. The very precise measurements of the mirrors motion can be determined, also in the presence of a disturbing noise, by means of the sudden reflectivity changes in special points of the mirrors positions. When the mirrors cross such positions, the effective opto-mechanical potential that arises in the device is (roughly) at a maximum. We show that the motion cross such potential maxima is not only confused by the presence of noise, but also favoured by noise itself that induces hoppings. Thus, the measurements of the times at which the crossings occur can be exploited to identify the properties of the applied signal. We also show how to circumvent the difficulty of the extremely long transient that occur in the system analyzing the escape average time with two different methods: a direct sample average and the indirect estimate from the tail distribution. Numerical simulations and physical insight suggest that the indirect estimate, through the analysis of the distribution tails with an appropriated cut off is robust against the disturbances that arise from the presence of transient dynamics.

physics.ins-det↗
arXiv2014

Membrane Heating in Living Tissues Exposed to Nonthermal Pulsed EM Fields

A bio tissue model consisting of multilayer spherical cells including four nested radial domains (nucleus, nuclear membrane, cytoplasm and plasma membrane) is worked out to derive the cell heating dynamics in presence of membrane capacitance dispersion under pulsed electromagnetic exposure. Two possible cases of frequency-dependent membrana models are discussed: plasma and nuclear membranes are dispersive, only the nuclear memebrane is dispersive . In both models an high localized heating of the membranes occurs, without significant temperature rise in the cytoplasm and nucleoplasm.

physics.bio-ph↗
arXiv2014

Escape Time of Josephson Junctions for Signal Detection

In this Chapter we investigate with the methods of signal detection the response of a Josephson junction to a perturbation to decide if the perturbation contains a coherent oscillation embedded in the background noise. When a Josephson Junction is irradiated by an external noisy source, it eventually leaves the static state and reaches a steady voltage state. The appearance of a voltage step allows to measure the time spent in the metastable state before the transition to the running state, thus defining an escape time. The distribution of the escape times depends upon the characteristics of the noise and the Josephson junction. Moreover, the properties of the distribution depends on the features of the signal (amplitude, frequency and phase), which can be therefore inferred through the appropriate signal processing methods. Signal detection with JJ is interesting for practical purposes, inasmuch as the superconductive elements can be (in principle) cooled to the absolute zero and therefore can add (in practice) as little intrinsic noise as refrigeration allows. It is relevant that the escape times bear a hallmark of the noise itself. The spectrum of the fluctuations due to the intrinsic classical (owed to thermal or environmental disturbances) or quantum (due to the tunnel across the barrier) sources are different. Therefore, a careful analysis of the escape times could also assist to discriminate the nature of the noise.

physics.optics↗
arXiv2014

Negative Differential Resistance due to Nonlinearities in Single and Stacked Josephson Junctions

Josephson junction systems with a negative differential resistance play an essential role for applications. As a well known example, long Josephson junctions of the BSCCO type have been considered as a source of THz radiation in recent experiments. Numerical results for the dynamics of the fluxon system have demonstrated that a cavity induced negative differential resistance plays a crucial role for the emission of electromagnetic radiation. We consider the case of a negative differential resistance region in the McCumber curve itself of a single junction and found that it has an effect on the emission of electromagnetic radiation. Two different shapes of negative differential resistance region are considered and we found it is essential to distinguish between current bias and voltage bias.

cond-mat.supr-con↗
arXiv2013

Escape Time Characterization of Pendular Fabry-Perot

We show that an escape from the potential minimum of Fabry-Perot interferometers can be detected measuring the associated sudden change of reflectivity. We demonstrate that the loss of information that occurs retaining only the sequence of escapes, rather than the full trajectory, can be very mild and can lead to an effective method to reveal the noise intensity or the presence of a coherent signal.

physics.data-an↗
arXiv2007

A parametric study of the lensing properties of dodecagonal photonic quasicrystals

We present a study of the lensing properties of two-dimensional (2-D) photonic quasicrystal (PQC) slabs made of dielectric cylinders arranged according to a 12-fold-symmetric square-triangle aperiodic tiling. Our full-wave numerical analysis confirms the results recently emerged in the technical literature and, in particular, the possibility of achieving focusing effects within several frequency regions. However, contrary to the original interpretation, such focusing effects turn out to be critically associated to local symmetry points in the PQC slab, and strongly dependent on its thickness and termination. Nevertheless, our study reveals the presence of some peculiar properties, like the ability to focus the light even for slabs with a reduced lateral width, or beaming effects, which render PQC slabs potentially interesting and worth of deeper investigation. Key words: Photonic quasicrystals; negative refraction; superlensing.

physics.optics↗
arXiv2004

Rejection Properties of Stochastic-Resonance-Based Detectors of Weak Harmonic Signals

In (V. Galdi et al., Phys. Rev. E57, 6470, 1998) a thorough characterization in terms of receiver operating characteristics (ROCs) of stochastic-resonance (SR) detectors of weak harmonic signals of known frequency in additive gaussian noise was given. It was shown that strobed sign-counting based strategies can be used to achieve a nice trade-off between performance and cost, by comparison with non-coherent correlators. Here we discuss the more realistic case where besides the sought signal (whose frequency is assumed known) further unwanted spectrally nearby signals with comparable amplitude are present. Rejection properties are discussed in terms of suitably defined false-alarm and false-dismissal probabilities for various values of interfering signal(s) strength and spectral separation.

gr-qc↗
arXiv2004

Correlator Bank Detection of GW chirps. False-Alarm Probability, Template Density and Thresholds: Behind and Beyond the Minimal-Match Issue

The general problem of computing the false-alarm rate vs. detection-threshold relationship for a bank of correlators is addressed, in the context of maximum-likelihood detection of gravitational waves, with specific reference to chirps from coalescing binary systems. Accurate (lower-bound) approximants for the cumulative distribution of the whole-bank supremum are deduced from a class of Bonferroni-type inequalities. The asymptotic properties of the cumulative distribution are obtained, in the limit where the number of correlators goes to infinity. The validity of numerical simulations made on small-size banks is extended to banks of any size, via a gaussian-correlation inequality. The result is used to estimate the optimum template density, yielding the best tradeoff between computational cost and detection efficiency, in terms of undetected potentially observable sources at a prescribed false-alarm level, for the simplest case of Newtonian chirps.

gr-qc↗