arXiv subjects

V. Prodanović

Publications and source records attributed to V. Prodanović.

3 recordsLinked to original sources

arXiv2024

Ultra-thin corrugated metamaterial film as large-area transmission dynode

Large-area transmission dynodes were fabricated by depositing an ultra-thin continuous film on a silicon wafer with a 3-dimensional pattern. After removing the silicon, a corrugated membrane with enhanced mechanical properties was formed. Mechanical materials, such as this corrugated membrane, are engineered to improve its strength and robustness, which allows it to span a larger surface in comparison to flat membranes while the film thickness remains constant. The ultra-thin film consists of three layers (Al$_2$O$_3$ /TiN/Al$_2$O$_3$) and is deposited by atomic layer deposition (ALD). The encapsulated TiN layer provides in-plane conductivity, which is needed to sustain secondary electron emission. Two types of corrugated membranes were fabricated: a hexagonal honeycomb and an octagonal pattern. The latter was designed to match the square pitch of a CMOS pixel chip. The transmission secondary electron yield was determined with a collector-based method using a scanning electron microscope. The highest transmission electron yield was measured on a membrane with an octagonal pattern. A yield of 2.15 was achieved for 3.15 keV incident electrons for an Al$_2$O$_3$ /TiN/Al$_2$O$_3$ tri-layer film with layer thicknesses of 10/5/15 nm. The variation in yield across the surface of the corrugated membrane was determined by constructing a yield map. The active surface for transmission secondary electron emission is near 100%, i.e. a primary electron generates transmission secondary electrons regardless of the point of impact on the corrugated membrane.

physics.ins-det↗

arXiv2024

The construction and characterization of MgO transmission dynodes

In this work we demonstrate that ultra-thin (5 and 15 nm) MgO transmission dynodes (tynodes) with sufficient high transmission electron yield (TEY) can be constructed. These tynodes act as electron amplification stages in a novel vacuum electron multiplier: the Timed Photon Counter (TiPC). The ultra-thin membranes with a diameter of 30 μm are arranged in a square 64-by-64-array. The TEY was determined with a scanning electron microscope (SEM) using primary electrons with primary energies of 0.75 - 5 keV. The method allow us to make a TEY map of the surface while simultaneously imaging the surface. The TEY of individual membranes can be extracted from the TEY map. An averaged maximum TEY of 4.6 +/- 0.2 was achieved by using 1.35 keV primary electrons on a TiN/MgO bi-layer membrane with a layer thickness of 2 and 5 nm, respectively. The TiN/MgO membrane with a layer thickness of 2 and 15 nm, respectively, has a maximum TEY of 3.3 +/- 0.1 (2.35 keV). Furthermore, the effect of the electric field strength on transmission (secondary) electron emission was investigated by placing the emission surface of a tynode in close proximity to a planar collector. By increasing the electric potential between the tynode and the collector, from -50 V to -100 V, the averaged maximum TEY improved from 4.6 +/- 0.2 to 5.0 +/- 0.3 at a primary energy of 1.35 keV with an upper limit of 5.5 on one of the membranes.

physics.ins-det↗

arXiv2021

Secondary Electron Emission from Multi-layered TiN/Al$_2$O$_3$ Transmission Dynodes

The (secondary) electron emission from multilayered Al$_2$O$_3$/TiN membranes has been investigated with a hemispherical collector system in a scanning electron microscope for electrons with energies between 0.3 and 10 keV. These ultra-thin membranes are designed to function as transmission dynodes in novel vacuum electron multipliers. Two different types, a bi-layer and a tri-layer, have been manufactured by means of atomic-layer deposition (ALD) of aluminum oxide and sputtering of titanium nitride. The reflection and transmission electron yield ($σ_R$, $σ_T$) have been measured for both types of membranes. In comparison, the tri-layer membranes outperformed the bi-layer membranes in terms of transmission electron yield for films with the same effective thickness. The highest transmission electron yield was measured on an Al$_2$O$_3$/TiN/Al$_2$O$_3$ film with layer thicknesses of 5/2.5/5 nm, which had a maximum transmission electron yield $σ_\text{T}^\text{max}(E_0)$ of 3.1 (1.55 keV). Furthermore, the bi-layer membranes have been investigated more in-depth by performing an additional measurement using a positive sample bias to separate the transmitted fraction $η_T$ and the transmission secondary electron yield $δ_T$. The transmitted fraction was used to determine the transmission parameter $p$, which characterizes the interaction of primary electrons (PEs) in thin films. The transmission secondary electron yield was used to compare the energy transfer of PEs in films with different thicknesses.

physics.ins-det↗