SearcharxivSearch

arXiv subjects

V. S. Asadchy

Publications and source records attributed to V. S. Asadchy.

15 recordsLinked to original sources

Giant bias-free nonreciprocity for unpolarized light via synthetic motion

Reciprocity breaking at optical frequencies typically relies on bulky magnets, dynamic modulation, or nonlinearities, all of which hinder chip-scale integration and the handling of unpolarised light. We introduce a fully passive, subwavelength metasurface that achieves polarisation-insensitive one-way transparency by combining self-magnetised ferrite nanodisks in a vortex state with symmetry-protected quasi-bound states in the continuum. The metasurface exhibits a pure synthetic moving-medium response at optical frequencies, yielding giant nonreciprocal directional dichroism. We report near-unity values for both the transmittance contrast and the emissivity-to-absorptivity ratio with experimentally widely available ferrite materials, all under unpolarised illumination and without external bias. Using temporal coupled-mode theory, we identify the design conditions necessary to maximise directional dichroism: critical coupling, Huygens-type resonance overlap, and strong inter-mode coupling. Furthermore, we propose a deterministic, stamp-assisted protocol for imprinting arbitrary, uniform, or patterned vortex configurations across large arrays of nanodisk meta-atoms, enabling scalable fabrication. This work establishes a practical route toward compact nonreciprocal photonics with applications in photonic gyrators, nonreciprocal wavefront engineering, and nonreciprocal solar cell technologies.

physics.optics

Expanding momentum bandgaps in photonic time crystals through resonances

The realization of photonic time crystals is a major opportunity but also comes with significant challenges. The most pressing one, potentially, is the requirement for a substantial modulation strength in the material properties to create a noticeable momentum bandgap. Reaching that noticeable bandgap in optics is highly demanding with current, and possibly also future, material platforms since their modulation strength is small by tendency. Here, we demonstrate that by introducing temporal variations in a resonant material, the momentum bandgap can be drastically expanded with modulation strengths in reach with known low-loss materials and realistic laser pump powers. The resonance can emerge from an intrinsic material resonance or a suitably spatially structured material supporting a structural resonance. Our concept is validated for resonant bulk media and optical metasurfaces and paves the way toward the first experimental realizations of photonic time crystals.

physics.optics

Tunable Localization of Light Using Nested Invisible Metasurface Cavities

An invisible cavity is an open resonant device that confines a localized field without producing any scattering outside of the device volume. By exploiting the scatter-less property of such device, it is possible to nest two invisible cavities, as the outer cavity would simply not notice the presence of the inner one, regardless of their relative position. As a result, the position of the inner cavity becomes a means to easily control the field localized inside the cavity and its quality factor. In this paper, we discuss the properties of nested invisible cavities as a simple method to achieve stronger localized fields and high tunable quality factor. Furthermore, we show that in optics, these cavities can be implemented using nanodisk-based dielectric metasurfaces that operate near their electric resonances.

physics.optics

Scattering from spheres made of time-varying and dispersive materials

Exploring the interaction of light with time-varying media is an intellectual challenge that, in addition to fundamental aspects, provides a pathway to multiple promising applications. Time modulation constitutes here a fundamental handle to control light on entirely different grounds. That holds particularly for complex systems simultaneously structured in space and time. However, a realistic description of time-varying materials requires considering their material dispersion. The combination thereof has barely been considered but is crucial since dispersion accompanies materials suitable for dynamic modulation. As a canonical scattering problem from which many general insights can be obtained, we develop and apply a self-consistent analytical theory of light scattering by a sphere made from a time-varying material exemplarily assumed to have a Lorentzian dispersion. We discuss the eigensolutions of Maxwell's equations in the bulk and present a dedicated Mie theory. The proposed theory is verified with full-wave simulations. We disclose effects such as energy transfer from the time-modulation subsystem to the electromagnetic field, amplifying carefully structured incident fields. Since many phenomena can be studied on analytical grounds with our formalism, it will be indispensable when exploring electromagnetic phenomena in time-varying and spatially structured finite objects of other geometries.

physics.optics

Non-scattering Metasurface-bound Cavities for Field Localization, Enhancement, and Suppression

We propose and analyse metasurface-bound invisible (non-scattering) partially open cavities where the inside field distribution can be engineered. It is demonstrated both theoretically and experimentally that the cavities exhibit unidirectional invisibility at the operating frequency with enhanced or suppressed field at different positions inside the cavity volume. Several examples of applications of the designed cavities are proposed and analyzed, in particular, cloaking sensors and obstacles, enhancement of emission, and "invisible waveguides". The non-scattering mode excited in the proposed cavity is driven by the incident wave and resembles an ideal bound state in the continuum of electromagnetic frequency spectrum. In contrast to known bound states in the continuum, the mode can stay localized in the cavity infinitely long, provided that the incident wave illuminates the cavity.

physics.app-ph

Non-Scattering Multi-Mirror Systems for Field Localization

Resonators composed of two mirrors, such as Fabry-Perot cavities, provide a simple but effective approach to achieve wave transmission with high finesse. Further increase of the quality factor requires reflectors with higher conductivity or multi-mirror solutions. However, the analytical complexity of resonators with more than two mirrors prevents the design of optimal structures without recurring to numerical methods. This work considers an alternative approach to this problem by using cavities which do not produce any electromagnetic scattering. We demonstrate that these invisible cavities can be placed inside one another, resulting in a `matryoshka-doll'-like resonator. The standing-wave distribution of the inner resonator can be controlled without disturbing that of the outer one, whereas the whole system remains non-scattering.

physics.app-ph

Unlimited Accumulation of Electromagnetic Energy Using Time-Varying Reactive Elements

Accumulation of energy by reactive elements is limited by the amplitude of time-harmonic external sources. In the steady-state regime, all incident power is fully reflected back to the source, and the stored energy does not increase in time, although the external source continuously supplies energy. Here, we show that this claim is not true if the reactive element is time-varying, and time-varying lossless loads of a transmission line or lossless metasurfaces can accumulate electromagnetic energy supplied by a time-harmonic source continuously in time without any theoretical limit. We analytically derive the required time dependence of the load reactance and show that it can be in principle realized as a series connection of mixers and filters. Furthermore, we prove that properly designing time-varying LC circuits one can arbitrarily engineer the time dependence of the current in the circuit fed by a given time-harmonic source. As an example, we theoretically demonstrate a circuit with a linearly increasing current through the inductor. Such LC circuits can accumulate huge energy from both the time-harmonic external source and the pump which works on varying the circuit elements in time. Finally, we discuss how this stored energy can be released in form of a time-compressed pulse.

physics.app-ph

Multi-Channel Reflectors: Versatile Performance Experimentally Tested

We investigate multi-channel reflectors, such as a three-channel power splitter and a five-channel isolating mirror. These metasurface reflectors are able to control reflections from and into several directions while possessing a flat surface. We design, fabricate, and experimentally study these new devices, confirming that the performance is nearly perfect.

physics.app-ph

Flat Engineered Multi-Channel Reflectors

Recent advances in engineered gradient metasurfaces have enabled unprecedented opportunities for light manipulation using optically thin sheets, such as anomalous refraction, reflection, or focusing of an incident beam. Here we introduce a concept of multi-channel functional metasurfaces, which are able to control incoming and outgoing waves in a number of propagation directions simultaneously. In particular, we reveal a possibility to engineer multi-channel reflectors. Under the assumption of reciprocity and energy conservation, we find that there exist three basic functionalities of such reflectors: Specular, anomalous, and retro reflections. Multi-channel response of a general flat reflector can be described by a combination of these functionalities. To demonstrate the potential of the introduced concept, we design and experimentally test three different multi-channel reflectors: Three- and five-channel retro-reflectors and a three-channel power splitter. Furthermore, by extending the concept to reflectors supporting higher-order Floquet harmonics, we forecast the emergence of other multiple-channel flat devices, such as isolating mirrors, complex splitters, and multi-functional gratings.

physics.optics

Perfect control of reflection and refraction using spatially dispersive metasurfaces

Non-uniform metasurfaces (electrically thin composite layers) can be used for shaping refracted and reflected electromagnetic waves. However, known design approaches based on the generalized refraction and reflection laws do not allow realization of perfectly performing devices: there are always some parasitic reflections into undesired directions. In this paper we introduce and discuss a general approach to the synthesis of metasurfaces for full control of transmitted and reflected plane waves and show that perfect performance can be realized. The method is based on the use of an equivalent impedance matrix model which connects the tangential field components at the two sides on the metasurface. With this approach we are able to understand what physical properties of the metasurface are needed in order to perfectly realize the desired response. Furthermore, we determine the required polarizabilities of the metasurface unit cells and discuss suitable cell structures. It appears that only spatially dispersive metasurfaces allow realization of perfect refraction and reflection of incident plane waves into arbitrary directions. In particular, ideal refraction is possible only if the metasurface is bianisotropic (weak spatial dispersion), and ideal reflection without polarization transformation requires spatial dispersion with a specific, strongly non-local response to the fields.

physics.optics

Full light absorption in single arrays of spherical nanoparticles

In this paper we show that arrays of core-shell nanoparticles function as effective thin absorbers of light. In contrast to known metamaterial absorbers, the introduced absorbers are formed by single planar arrays of spherical inclusions and enable full absorption of light incident on either or both sides of the array. We demonstrate possibilities for realizing different kinds of symmetric absorbers, including resonant, ultra-broadband, angularly selective, and all-angle absorbers. The physical principle behind these designs is explained considering balanced electric and magnetic responses of unit cells. Photovoltaic devices and thermal emitters are the two most important potential applications of the proposed designs.

physics.optics

Broadband reflectionless metasheets: Frequency-selective transmission and perfect absorption

Energy of propagating electromagnetic waves can be fully absorbed in a thin lossy layer, but only in a narrow frequency band, as follows from the causality principle. On the other hand, it appears that there are no fundamental limitations on broadband matching of thin absorbing layers. However, known thin absorbers produce significant reflections outside of the resonant absorption band. In this paper we explore possibilities to realize a thin absorbing layer which produces no reflected waves in a very wide frequency range, while the transmission coefficient has a narrow peak of full absorption. Here we show, both theoretically and experimentally, that a wide-band-matched thin resonant absorber, invisible in reflection, can be realized if one and the same resonant mode of the absorbing array unit cells is utilized to create both electric and magnetic responses. We test this concept using chiral particles in each unit cells, arranged in a periodic planar racemic array, utilizing chirality coupling in each unit cell but compensating the field coupling at the macroscopic level. We prove that the concept and the proposed realization approach also can be used to create non-reflecting layers for full control of transmitted fields. Our results can have a broad range of potential applications over the entire electromagnetic spectrum including, for example, perfect ultra-compact wave filters and selective multi-frequency sensors.

physics.optics

Functional metamirrors

Conventional mirrors obey Snell's reflection law: a plane wave is reflected as a plane wave, at the same angle. To engineer spatial distributions of fields reflected from a mirror, one can either shape the reflector (for example, creating a parabolic reflector) or position some phase-correcting elements on top of a mirror surface (for example, designing a reflectarray antenna). Here we show, both theoretically and experimentally, that full-power reflection with general control over reflected wave phase is possible with a single-layer array of deeply sub-wavelength inclusions. These proposed artificial surfaces, metamirrors, provide various functions of shaped or nonuniform reflectors without utilizing any mirror. This can be achieved only if the forward and backward scattering of the inclusions in the array can be engineered independently, and we prove that it is possible using electrically and magnetically polarizable inclusions. The proposed sub-wavelength inclusions possess desired reflecting properties at the operational frequency band, while at other frequencies the array is practically transparent. The metamirror concept leads to a variety of applications over the entire electromagnetic spectrum, such as optically transparent focusing antennas for satellites, multi-frequency reflector antennas for radio astronomy, low-profile conformal antennas for telecommunications, and nano-reflectarray antennas for integrated optics.

physics.optics

Polarizabilities of nonreciprocal bianisotropic particles

For two electrically small nonreciprocal scatterers an analytical electromagnetic model of polarizabilities is developed. Both particles are bianisotropic: the so-called Tellegen-omega particle and moving-chiral particle. Analytical results are compared to the full-wave numerical simulations. Both models satisfy to main physical restrictions and leave no doubts in the possibility to realize these particles experimentally. This paper is a necessary step towards applications of nonreciprocal bianisotropic particles such as perfect electromagnetic isolators, twist polarizers, thin-sheet phase shifters, and other devices.

physics.optics

Tailoring reflections from thin composite metamirrors

We propose an effective route to fully control the phase of plane waves reflected from electrically (optically) thin sheets. This becomes possible using engineered artificial full-reflection layers (metamirrors) as arrays of electrically small resonant bi-anisotropic particles. In this scenario, fully reflecting mirrors do not contain any continuous ground plane, but only arrays of small particles. Bi-anisotropic omega coupling is required to get asymmetric response in reflection phase for plane waves incident from the opposite sides of the composite mirror. It is shown that with this concept one can independently tailor the phase of electromagnetic waves reflected from both sides of the mirror array.

physics.optics