SearcharxivSearch

arXiv subjects

V. S. Titov

Publications and source records attributed to V. S. Titov.

At least 19 recordsLinked to original sources

Magnetogram-matching Biot-Savart Law and Decomposition of Vector Magnetograms

We generalize a magnetogram-matching Biot-Savart law (BSL) from planar to spherical geometry. For a given coronal current density $\bf{J}$, this law determines the magnetic field $\tilde{\bf B}$ whose radial component vanishes at the surface. The superposition of $\tilde{\bf B}$ with a potential field defined by a given surface radial field, $B_r$, provides the entire configuration where $B_r$ remains unchanged by the currents. Using this approach, we (1) upgrade our regularized BSLs for constructing coronal magnetic flux ropes (MFRs) and (2) propose a new method for decomposing a measured photospheric magnetic field as ${\bf B} = {\bf B}_{\rm{pot}} + {\bf B}_T + {\bf B}_{\tilde{S}}$, where the potential, ${\bf B}_{\rm{pot}}$, toroidal, ${\bf B}_T$, and poloidal, ${\bf B}_{\tilde{S}}$, fields are determined by $B_r$, $J_r$, and the surface divergence of ${\bf B} - {\bf B}_{\rm{pot}}$, respectively, all derived from magnetic data. Our ${\bf B}_T$ is identical to the one in the alternative Gaussian decomposition by Schuck et al. (2022), while ${\bf B}_{\rm{pot}}$ and ${\bf B}_{\tilde{S}}$ are different from their poloidal fields ${\bf B}^{<}_{\rm{P}}$ and ${\bf B}^{>}_{\rm{P}}$, which are $potential$ in the infinitesimal proximity to the upper and lower side of the surface, respectively. In contrast, our ${\bf B}_{\tilde{S}}$ has no such constraints and, as ${\bf B}_{\rm{pot}}$ and ${\bf B}_T$, refers to the $same$ upper side of the surface. In spite of these differences, for a continuous $\bf{J}$ distribution across the surface, ${\bf B}_{\rm{pot}}$ and ${\bf B}_{\tilde{S}}$ are linear combinations of ${\bf B}^{<}_{\rm{P}}$ and ${\bf B}^{>}_{\rm{P}}$. We demonstrate that, similar to the Gaussian method, our decomposition allows one to identify the footprints and projected surface-location of MFRs in the solar corona, as well as the direction and connectivity of their currents.

astro-ph.SR

Coronal Heating and Solar Wind Generation by Flux Cancellation Reconnection

In this paper we propose that flux cancellation on small granular scales ($\lesssim 1000$ km) ubiquitously drives reconnection at a multitude of sites in the low solar atmosphere, contributing to chromospheric/coronal heating and the generation of the solar wind. We analyse the energy conversion in these small-scale flux cancellation events using both analytical models and three-dimensional, resistive magnetohydrodynamic (MHD) simulations. The analytical models -- in combination with the latest estimates of flux cancellation rates -- allow us to estimate the energy release rates due to cancellation events, which are found to be of the order $10^6-10^7$ erg cm$^{-2}$sec$^{-1}$, sufficient to heat the chromosphere and corona of the Quiet Sun and active regions, and to power the solar wind. The MHD simulations confirm the conversion of energy in reconnecting current sheets, in a geometry representing a small-scale bipole being advected towards an intergranular lane. A ribbon-like jet of heated plasma is accelerated upwards, that could also escape the Sun as the solar wind in an open-field configuration. We conclude that through two phases of atmospheric energy release -- pre-cancellation and cancellation -- the cancellation of photospheric magnetic flux fragments and the associated magnetic reconnection may provide a substantial energy and mass flux contribution to coronal heating and solar wind generation.

astro-ph.SR

Solar Eruptions Triggered by Flux Emergence Below or Near a Coronal Flux Rope

Observations have shown a clear association of filament/prominence eruptions with the emergence of magnetic flux in or near filament channels. Magnetohydrodynamic (MHD) simulations have been employed to systematically study the conditions under which such eruptions occur. These simulations to date have modeled filament channels as two-dimensional (2D) flux ropes or 3D uniformly sheared arcades. Here we present MHD simulations of flux emergence into a more realistic configuration consisting of a bipolar active region containing a line-tied 3D flux rope. We use the coronal flux-rope model of Titov et al. (2014) as the initial condition and drive our simulations by imposing boundary conditions extracted from a flux-emergence simulation by Leake et al. (2013). We identify three mechanisms that determine the evolution of the system: (i) reconnection displacing foot points of field lines overlying the coronal flux rope, (ii) changes of the ambient field due to the intrusion of new flux at the boundary, and (iii) interaction of the (axial) electric currents in the pre-existing and newly emerging flux systems. The relative contributions and effects of these mechanisms depend on the properties of the pre-existing and emerging flux systems. Here we focus on the location and orientation of the emerging flux relative to the coronal flux rope. Varying these parameters, we investigate under which conditions an eruption of the latter is triggered.

astro-ph.SR

Optimization of Magnetic Flux Ropes Modeled with the RBSL method

The so-called regularized Biot-Savart laws (RBSLs) provide an efficient and flexible method for modeling pre-eruptive magnetic configurations of coronal mass ejections (CMEs) whose characteristics are constrained by observational images and magnetic-field data. This method allows one to calculate the field of magnetic flux ropes (MFRs) with small circular cross-sections and an arbitrary axis shape. The field of the whole configuration is constructed as a superposition of (1) such a flux-rope field and (2) an ambient potential field derived, for example, from an observed magnetogram. The RBSL kernels are determined from the requirement that the MFR field for a straight cylinder must be exactly force-free. For a curved MFR, however, the magnetic forces are generally unbalanced over the whole path of the MFR. To minimize these forces, we apply a modified Gauss-Newton method to find optimal MFR parameters. This is done by iteratively adjusting the MFR axis path and axial current. We then try to relax the resulting optimized configuration in a subsequent line-tied zero-beta magnetohydrodynamic simulation toward a force-free equilibrium. By considering two models of the sigmoidal pre-eruption configuration for the 2009 February 13 CME, we demonstrate how this approach works and what it is capable of. We show, in particular, that the building blocks of the core magnetic structure described by these models match to morphological features typically observed in such type of configurations. Our method will be useful for both the modeling of particular eruptive events and theoretical studies of idealized pre-eruptive MFR configurations.

astro-ph.SR

Slip-Back Mapping as a Tracker of Topological Changes in Evolving Magnetic Configurations

The topology of the coronal magnetic field produces a strong impact on the properties of the solar corona and presumably on the origin of the slow solar wind. To advance our understanding of this impact, we revisit the concept of so-called slip-back mapping (Titov et al. 2009) and adapt it for determining open, closed, and disconnected flux systems that are formed in the solar corona by magnetic reconnection during a given time interval. The developed method allows us, in particular, to describe the magnetic flux transfer between open and closed flux regions via so-called interchange reconnection with an unprecedented level of details. We illustrate the application of this method to the analysis of the global MHD evolution of the solar corona that is driven by an idealized differential rotation of the photospheric plasma.

astro-ph.SR

GPU Acceleration of an Established Solar MHD Code using OpenACC

GPU accelerators have had a notable impact on high-performance computing across many disciplines. They provide high performance with low cost/power, and therefore have become a primary compute resource on many of the largest supercomputers. Here, we implement multi-GPU acceleration into our Solar MHD code (MAS) using OpenACC in a fully portable, single-source manner. Our preliminary implementation is focused on MAS running in a reduced physics "zero-beta" mode. While valuable on its own, our main goal is to pave the way for a full physics, thermodynamic MHD implementation. We describe the OpenACC implementation methodology and challenges. "Time-to-solution" performance results of a production-level flux rope eruption simulation on multi-CPU and multi-GPU systems are shown. We find that the GPU-accelerated MAS code has the ability to run "zero-beta" simulations on a single multi-GPU server at speeds previously requiring multiple CPU server-nodes of a supercomputer.

physics.comp-ph

The Contribution of Coronal Jets To The Solar Wind

Transient collimated plasma eruptions in the solar corona, commonly known as coronal (or X-ray) jets, are among the most interesting manifestations of solar activity. It has been suggested that these events contribute to the mass and energy content of the corona and solar wind, but the extent of these contributions remains uncertain. We have recently modeled the formation and evolution of coronal jets using a three-dimensional (3D) magnetohydrodynamic (MHD) code with thermodynamics in a large spherical domain that includes the solar wind. Our model is coupled to 3D MHD flux-emergence simulations, i.e, we use boundary conditions provided by such simulations to drive a time-dependent coronal evolution. The model includes parametric coronal heating, radiative losses, and thermal conduction, which enables us to simulate the dynamics and plasma properties of coronal jets in a more realistic manner than done so far. Here we employ these simulations to calculate the amount of mass and energy transported by coronal jets into the outer corona and inner heliosphere. Based on observed jet-occurrence rates, we then estimate the total contribution of coronal jets to the mass and energy content of the solar wind to (0.4-3.0) % and (0.3-1.0) %, respectively. Our results are largely consistent with the few previous rough estimates obtained from observations, supporting the conjecture that coronal jets provide only a small amount of mass and energy to the solar wind. We emphasize, however, that more advanced observations and simulations are needed to substantiate this conjecture.

astro-ph.SR

Modeling Jets in the Corona and Solar Wind

Coronal jets are transient, collimated eruptions that occur in regions of predominantly open magnetic field in the solar corona. Our understanding of these events has greatly evolved in recent years but several open questions, such as the contribution of coronal jets to the solar wind, remain. Here we present an overview of the observations and numerical modeling of coronal jets, followed by a brief description of "next-generation" simulations that include an advanced description of the energy transfer in the corona ("thermodynamic MHD"), large spherical computational domains, and the solar wind. These new models will allow us to address some of the open questions.

astro-ph.SR

2010 August 1-2 sympathetic eruptions: I. Magnetic topology of the source-surface background field

A sequence of apparently coupled eruptions was observed on 2010 August 1-2 by SDO and STEREO. The eruptions were closely synchronized with one another, even though some of them occurred at widely separated locations. In an attempt to identify a plausible reason for such synchronization, we study the large-scale structure of the background magnetic configuration. The coronal field was computed from the photospheric magnetic field observed at the appropriate time period by using the potential field source-surface model. We investigate the resulting field structure by analyzing the so-called squashing factor calculated at the photospheric and source-surface boundaries, as well as at different coronal cross-sections. Using this information as a guide, we determine the underlying structural skeleton of the configuration, including separatrix and quasi-separatrix surfaces. Our analysis reveals, in particular, several pseudo-streamers in the regions where the eruptions occurred. Of special interest to us are the magnetic null points and separators associated with the pseudo-streamers. We propose that magnetic reconnection triggered along these separators by the first eruption likely played a key role in establishing the assumed link between the sequential eruptions. The present work substantiates our recent simplified magnetohydrodynamic model of sympathetic eruptions and provides a guide for further deeper study of these phenomena. Several important implications of our results for the S-web model of the slow solar wind are also addressed.

astro-ph.SR

A model for magnetically coupled sympathetic eruptions

Sympathetic eruptions on the Sun have been observed for several decades, but the mechanisms by which one eruption can trigger another one remain poorly understood. We present a 3D MHD simulation that suggests two possible magnetic trigger mechanisms for sympathetic eruptions. We consider a configuration that contains two coronal flux ropes located within a pseudo-streamer and one rope located next to it. A sequence of eruptions is initiated by triggering the eruption of the flux rope next to the streamer. The expansion of the rope leads to two consecutive reconnection events, each of which triggers the eruption of a flux rope by removing a sufficient amount of overlying flux. The simulation qualitatively reproduces important aspects of the global sympathetic event on 2010 August 1 and provides a scenario for so-called twin filament eruptions. The suggested mechanisms are applicable also for sympathetic eruptions occurring in other magnetic configurations.

astro-ph.SR

A Model for the Sources of the Slow Solar Wind

Models for the origin of the slow solar wind must account for two seemingly contradictory observations: The slow wind has the composition of the closed field corona, implying that it originates from the continuous opening and closing of flux at the boundary between open and closed field. On the other hand, the slow wind also has large angular width, up to ~ 60{\circ}, suggesting that its source extends far from the open-closed boundary. We propose a model that can explain both observations. The key idea is that the source of the slow wind at the Sun is a network of narrow (possibly singular) open-field corridors that map to a web of separatrices and quasi-separatrix layers in the heliosphere. We compute analytically the topology of an open-field corridor and show that it produces a quasi-separatrix layer in the heliosphere that extends to angles far from the heliospheric current sheet. We then use an MHD code and MDI/SOHO observations of the photospheric magnetic field to calculate numerically, with high spatial resolution, the quasi-steady solar wind and magnetic field for a time period preceding the August 1, 2008 total solar eclipse. Our numerical results imply that, at least for this time period, a web of separatrices (which we term an S-web) forms with sufficient density and extent in the heliosphere to account for the observed properties of the slow wind. We discuss the implications of our S-web model for the structure and dynamics of the corona and heliosphere, and propose further tests of the model.

astro-ph.SR

Magnetic Topology of Coronal Hole Linkages

In recent work, Antiochos and coworkers argued that the boundary between the open and closed field regions on the Sun can be extremely complex with narrow corridors of open flux connecting seemingly disconnected coronal holes from the main polar holes, and that these corridors may be the sources of the slow solar wind. We examine, in detail, the topology of such magnetic configurations using an analytical source surface model that allows for analysis of the field with arbitrary resolution. Our analysis reveals three important new results: First, a coronal hole boundary can join stably to the separatrix boundary of a parasitic polarity region. Second, a single parasitic polarity region can produce multiple null points in the corona and, more important, separator lines connecting these points. It is known that such topologies are extremely favorable for magnetic reconnection, because they allow this process to occur over the entire length of the separators rather than being confined to a small region around the nulls. Finally, the coronal holes are not connected by an open-field corridor of finite width, but instead are linked by a singular line that coincides with the separatrix footprint of the parasitic polarity. We investigate how the topological features described above evolve in response to the motion of the parasitic polarity region. The implications of our results for the sources of the slow solar wind and for coronal and heliospheric observations are discussed.

astro-ph.SR

Testing magnetofrictional extrapolation with the Titov-Démoulin model of solar active regions

We examine the nonlinear magnetofrictional extrapolation scheme using the solar active region model by Titov and Démoulin as test field. This model consists of an arched, line-tied current channel held in force-free equilibrium by the potential field of a bipolar flux distribution in the bottom boundary. A modified version, having a parabolic current density profile, is employed here. We find that the equilibrium is reconstructed with very high accuracy in a representative range of parameter space, using only the vector field in the bottom boundary as input. Structural features formed in the interface between the flux rope and the surrounding arcade-"hyperbolic flux tube" and "bald patch separatrix surface"-are reliably reproduced, as are the flux rope twist and the energy and helicity of the configuration. This demonstrates that force-free fields containing these basic structural elements of solar active regions can be obtained by extrapolation. The influence of the chosen initial condition on the accuracy of reconstruction is also addressed, confirming that the initial field that best matches the external potential field of the model quite naturally leads to the best reconstruction. Extrapolating the magnetogram of a Titov-Démoulin equilibrium in the unstable range of parameter space yields a sequence of two opposing evolutionary phases which clearly indicate the unstable nature of the configuration: a partial buildup of the flux rope with rising free energy is followed by destruction of the rope, losing most of the free energy.

astro-ph.SR

Slip-Squashing Factors as a Measure of Three-Dimensional Magnetic Reconnection

A general method for describing magnetic reconnection in arbitrary three-dimensional magnetic configurations is proposed. The method is based on the field-line mapping technique previously used only for the analysis of magnetic structure at a given time. This technique is extended here so as to analyze the evolution of magnetic structure. Such a generalization is made with the help of new dimensionless quantities called "slip-squashing factors". Their large values define the surfaces that border the reconnected or to-be-reconnected magnetic flux tubes for a given period of time during the magnetic evolution. The proposed method is universal, since it assumes only that the time sequence of evolving magnetic field and the tangential boundary flows are known. The application of the method is illustrated for simple examples, one of which was considered previously by Hesse and coworkers in the framework of the general magnetic reconnection theory. The examples help us to compare these two approaches; they reveal also that, just as for magnetic null points, hyperbolic and cusp minimum points of a magnetic field may serve as favorable sites for magnetic reconnection. The new method admits a straightforward numerical implementation and provides a powerful tool for the diagnostics of magnetic reconnection in numerical models of solar-flare-like phenomena in space and laboratory plasmas.

astro-ph

May 12 1997 Cme Event: I. a Simplified Model of the Pre-Eruptive Magnetic Structure

A simple model of the coronal magnetic field prior to the CME eruption on May 12 1997 is developed. First, the magnetic field is constructed by superimposing a large-scale background field and a localized bipolar field to model the active region (AR) in the current-free approximation. Second, this potential configuration is quasi-statically sheared by photospheric vortex motions applied to two flux concentrations of the AR. Third, the resulting force-free field is then evolved by canceling the photospheric magnetic flux with the help of an appropriate tangential electric field applied to the central part of the AR. To understand the structure of the modeled configuration, we use the field line mapping technique by generalizing it to spherical geometry. It is demonstrated that the initial potential configuration contains a hyperbolic flux tube (HFT) which is a union of two intersecting quasi-separatrix layers. This HFT provides a partition of the closed magnetic flux between the AR and the global solar magnetic field. The vortex motions applied to the AR interlock the field lines in the coronal volume to form additionally two new HFTs pinched into thin current layers. Reconnection in these current layers helps to redistribute the magnetic flux and current within the AR in the flux-cancellation phase. In this phase, a magnetic flux rope is formed together with a bald patch separatrix surface wrapping around the rope. Other important implications of the identified structural features of the modeled configuration are also discussed.

astro-ph

Generalized Squashing Factors for Covariant Description of Magnetic Connectivity in the Solar Corona

The study of magnetic connectivity in the solar corona reveals a need to generalize the field line mapping technique to arbitrary geometry of the boundaries and systems of coordinates. Indeed, the global description of the connectivity in the corona requires the use of the photospheric and solar wind boundaries. Both are closed surfaces and therefore do not admit a global regular system of coordinates. At least two overlapping regular systems of coordinates for each of the boundaries are necessary in this case to avoid spherical-pole-like singularities in the coordinates of the footpoints. This implies that the basic characteristic of magnetic connectivity - the squashing degree or factor $Q$ of elemental flux tubes (Titov et al., 2002) - must be rewritten in covariant form. Such a covariant expression of $Q$ is derived in this work. The derived expression is very flexible and highly efficient for describing the global magnetic connectivity in the solar corona. In addition, a general expression for a new characteristic $Q_\perp$ which defines a squashing of the flux tubes in the directions perpendicular to the field lines is determined. This new quantity makes it possible to filter out the quasi-separatrix layers whose large values of $Q$ are caused by a projection effect at the field lines nearly touching the photosphere. Thus, the value $Q_\perp$ provides a much more precise description of the volumetric properties of the magnetic field structure. The difference between $Q$ and $Q_\perp$ is illustrated by comparing their distributions for two configurations, one of which is the Titov-Demoulin (1999) model of a twisted magnetic field.

astro-ph

Formation of current sheets and sigmoidal structure by the kink instability of a magnetic loop

We study dynamical consequences of the kink instability of a twisted coronal flux rope, using the force-free coronal loop model by Titov & Démoulin (1999) as the initial condition in ideal-MHD simulations. When a critical value of the twist is exceeded, the long-wavelength ($m=1$) kink mode develops. Analogous to the well-known cylindrical approximation, a helical current sheet is then formed at the interface with the surrounding medium. In contrast to the cylindrical case, upward-kinking loops form a second, vertical current sheet below the loop apex at the position of the hyperbolic flux tube (generalized X line) in the model. The current density is steepened in both sheets and eventually exceeds the current density in the loop (although the kink perturbation starts to saturate in our simulations without leading to a global eruption). The projection of the field lines that pass through the vertical current sheet shows an S shape whose sense agrees with the typical sense of transient sigmoidal (forward or reverse S-shaped) structures that brighten in soft X rays prior to coronal eruptions. The upward-kinked loop has the opposite S shape, leading to the conclusion that such sigmoids do not generally show the erupting loops themselves but indicate the formation of the vertical current sheet below them that is the central element of the standard flare model.

astro-ph

Ideal kink instability of a magnetic loop equilibrium

The force-free coronal loop model by Titov & Démoulin (1999} is found to be unstable with respect to the ideal kink mode, which suggests this instability as a mechanism for the initiation of flares. The long-wavelength ($m=1$) mode grows for average twists $Φ\ga3.5π$ (at a loop aspect ratio of $\approx$ 5). The threshold of instability increases with increasing major loop radius, primarily because the aspect ratio then also increases. Numerically obtained equilibria at subcritical twist are very close to the approximate analytical equilibrium; they do not show indications of sigmoidal shape. The growth of kink perturbations is eventually slowed down by the surrounding potential field, which varies only slowly with radius in the model. With this field a global eruption is not obtained in the ideal MHD limit. Kink perturbations with a rising loop apex lead to the formation of a vertical current sheet below the apex, which does not occur in the cylindrical approximation.

astro-ph