arXiv subjects

Vahid Jamali

Publications and source records attributed to Vahid Jamali.

At least 109 records · Page 6Linked to original sources

arXiv2019

Resource Allocation for Multi-User Downlink MISO OFDMA-URLLC Systems

This paper considers the resource allocation algorithm design for downlink multiple-input single-output (MISO) orthogonal frequency division multiple access (OFDMA) ultra-reliable low latency communication (URLLC) systems. To meet the stringent delay requirements of URLLC, short packet transmission is adopted and taken into account for resource allocation algorithm design. The resource allocation is optimized for maximization of the weighted system sum throughput subject to quality-of-service (QoS) constraints regarding the URLLC users' number of transmitted bits, packet error probability, and delay. Despite the non-convexity of the resulting optimization problem, the optimal solution is found via monotonic optimization. The corresponding optimal resource allocation policy can serve as a performance upper bound for sub-optimal low-complexity solutions. We develop such a low-complexity resource allocation algorithm to strike a balance between performance and complexity. Our simulation results reveal the importance of using multiple antennas for reducing the latency and improving the reliability of URLLC systems. Moreover, the proposed sub-optimal algorithm is shown to closely approach the performance of the proposed optimal algorithm and outperforms two baseline schemes by a considerable margin, especially when the users have heterogeneous delay requirements. Finally, conventional resource allocation designs based on Shannon's capacity formula are shown to be not applicable in MISO OFDMA-URLLC systems as they may violate the users' delay constraints.

cs.IT↗

arXiv2019

Diffusive Mobile MC with Absorbing Receivers: Stochastic Analysis and Applications

This paper presents a stochastic analysis of the time-variant channel impulse response (CIR) of a three dimensional diffusive mobile molecular communication (MC) system where the transmitter, the absorbing receiver, and the molecules can freely diffuse. In our analysis, we derive the mean, variance, probability density function (PDF), and cumulative distribution function (CDF) of the CIR. We also derive the PDF and CDF of the probability p that a released molecule is absorbed at the receiver during a given time period. The obtained analytical results are employed for the design of drug delivery and MC systems with imperfect channel state information. For the first application, we exploit the mean and variance of the CIR to optimize a controlled-release drug delivery system employing a mobile drug carrier. We evaluate the performance of the proposed release design based on the PDF and CDF of the CIR. We demonstrate significant savings in the amount of released drugs compared to a constant-release scheme and reveal the necessity of accounting for the drug-carrier's mobility to ensure reliable drug delivery. For the second application, we exploit the PDF of the distance between the mobile transceivers and the CDF of p to optimize three design parameters of an MC system employing on-off keying modulation and threshold detection. Specifically, we optimize the detection threshold at the receiver, the release profile at the transmitter, and the time duration of a bit frame. We show that the proposed optimal designs can significantly improve the system performance in terms of the bit error rate and the efficiency of molecule usage.

cs.IT↗

arXiv2019

Diffusive Molecular Communications with Reactive Molecules: Channel Modeling and Signal Design

This paper focuses on molecular communication (MC) systems using two types of signaling molecules which may participate in a reversible bimolecular reaction in the channel. The motivation for studying these MC systems is that they can realize the concept of constructive and destructive signal superposition, which leads to favorable properties such as inter-symbol interference (ISI) reduction and avoiding environmental contamination due to continuous release of signaling molecules into the channel. This work first presents a general formulation for binary modulation schemes that employ two types of signaling molecules and proposes several modulation schemes as special cases. Moreover, two types of receivers are considered: a receiver that is able to observe both types of signaling molecules (2TM), and a simpler receiver that can observe only one type of signaling molecules (1TM). For both of these receivers, the maximum likelihood (ML) detector for general binary modulation is derived under the assumption that the detector has perfect knowledge of the ISI-causing sequence. In addition, two suboptimal detectors of different complexity are proposed, namely an ML-based detector that employs an estimate of the ISI-causing sequence and a detector that neglects the effect of ISI. The proposed detectors, except for the detector that neglects ISI for the 2TM receiver, require knowledge of the channel response (CR) of the considered MC system. Moreover, the CR is needed for performance evaluation of all proposed detectors. However, deriving the CR of MC systems with reactive signaling molecules is challenging since the underlying partial differential equations that describe the reaction-diffusion mechanism are coupled and non-linear. Therefore, we develop an algorithm for efficient computation of the CR and validate its accuracy via particle-based simulation.

cs.IT↗

arXiv2019

Feedback-Aware Precoding for Millimeter Wave Massive MIMO Systems

Millimeter wave (mmWave) communication is a promising solution for coping with the ever-increasing mobile data traffic because of its large bandwidth. To enable a sufficient link margin, a large antenna array employing directional beamforming, which is enabled by the availability of channel state information at the transmitter (CSIT), is required. However, CSIT acquisition for mmWave channels introduces a huge feedback overhead due to the typically large number of transmit and receive antennas. Leveraging properties of mmWave channels, this paper proposes a precoding strategy which enables a flexible adjustment of the feedback overhead. In particular, the optimal unconstrained precoder is approximated by selecting a variable number of elements from a basis that is constructed as a function of the transmitter array response, where the number of selected basis elements can be chosen according to the feedback constraint. Simulation results show that the proposed precoding scheme can provide a near-optimal solution if a higher feedback overhead can be afforded. For a low overhead, it can still provide a good approximation of the optimal precoder.

cs.IT↗

arXiv2019

Modeling Duct Flow for Molecular Communication

Active transport such as fluid flow is sought in molecular communication to extend coverage, improve reliability, and mitigate interference. Flow models are often over-simplified, assuming one-dimensional diffusion with constant drift. However, diffusion and flow are usually encountered in three-dimensional bounded environments where the flow is highly non-uniform such as in blood vessels or microfluidic channels. For a qualitative understanding of the relevant physical effects inherent to these channels, based on the Peclet number and the transmitter-receiver distance, we study when simplified models of uniform flow and advection-only transport are applicable. For these two regimes, analytical expressions for the channel impulse response are derived and validated by particle-based simulation. Furthermore, as advection-only transport is typically overlooked and hence not analyzed in the molecular communication literature, we evaluate the symbol error rate for exemplary on-off keying as performance metric.

cs.ET↗

arXiv2019

Magnetic Nanoparticle Based Molecular Communication in Microfluidic Environments

The possibility to guide and control magnetic nanoparticles in a non-invasive manner has spawned various applications in biotechnology such as targeted drug delivery and sensing of biological substances. These applications are facilitated by the engineering of the size, selective chemical reactivity, and general chemical composition of the employed particles. Motivated by their widespread use and favorable properties, in this paper, we provide a theoretical study of the potential benefits of magnetic nanoparticles for the design of molecular communication systems. In particular, we consider magnetic nanoparticle based communication in a microfluidic channel where an external magnetic field is employed to attract the information-carrying particles to the receiver. We show that the particle transport affected by Brownian motion, fluid flow, and an external magnetic field can be mathematically modeled as diffusion with drift. Thereby, we reveal that the key parameters determining the magnetic force are the particle size and the magnetic field gradient. Moreover, we derive an analytical expression for the channel impulse response, which is used to evaluate the potential gain in the expected number of observed nanoparticles due to the magnetic field. Furthermore, adopting the symbol error rate as performance metric, we show that using magnetic nanoparticles can enable reliable communication in the presence of disruptive fluid flow. Numerical results obtained by particle-based simulation validate the accuracy of the derived analytical expressions.

cs.ET↗

arXiv2019

Resource Allocation for Multi-User Downlink URLLC-OFDMA Systems

In this paper, we study resource allocation for downlink orthogonal frequency division multiple access (OFDMA) systems with the objective to enable ultra-reliable low latency communication (URLLC). To meet the stringent delay requirements of URLLC, the impact of short packet communication is taken into account for resource allocation algorithm design. In particular, the resource allocation design is formulated as a weighted system sum throughput maximization problem with quality-of-service (QoS) constraints for the URLLC users. The formulated problem is non-convex, and hence, finding the global optimum solution entails a high computational complexity. Thus, an algorithm based on successive convex optimization is proposed to find a sub-optimal solution with polynomial time complexity. Simulation results confirm that the proposed algorithm facilities URLLC and significantly improves the system sum throughput compared to two benchmark schemes.

cs.IT↗

arXiv2018

Channel Modeling for Diffusive Molecular Communication - A Tutorial Review

Molecular communication (MC) is a new communication engineering paradigm where molecules are employed as information carriers. MC systems are expected to enable new revolutionary applications such as sensing of target substances in biotechnology, smart drug delivery in medicine, and monitoring of oil pipelines or chemical reactors in industrial settings. As for any other kind of communication, simple yet sufficiently accurate channel models are needed for the design, analysis, and efficient operation of MC systems. In this paper, we provide a tutorial review on mathematical channel modeling for diffusive MC systems. The considered end-to-end MC channel models incorporate the effects of the release mechanism, the MC environment, and the reception mechanism on the observed information molecules. Thereby, the various existing models for the different components of an MC system are presented under a common framework and the underlying biological, chemical, and physical phenomena are discussed. Deterministic models characterizing the expected number of molecules observed at the receiver and statistical models characterizing the actual number of observed molecules are developed. In addition, we provide channel models for time-varying MC systems with moving transmitters and receivers, which are relevant for advanced applications such as smart drug delivery with mobile nanomachines. For complex scenarios, where simple MC channel models cannot be obtained from first principles, we investigate simulation-driven and experimentally-driven channel models. Finally, we provide a detailed discussion of potential challenges, open research problems, and future directions in channel modeling for diffusive MC systems.

cs.ET↗

arXiv2018

Scalable and Energy-Efficient Millimeter Massive MIMO Architectures: Reflect-Array and Transmit-Array Antennas

Hybrid analog-digital architectures are considered as promising candidates for implementing millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems since they enable a considerable reduction of the required number of costly radio frequency (RF) chains by moving some of the signal processing operations into the analog domain. However, the analog feed network, comprising RF dividers, combiners, phase shifters, and line connections, of hybrid MIMO architectures is not scalable due to its prohibitively high power consumption for large numbers of transmit antennas. Motivated by this limitation, in this paper, we study novel massive MIMO architectures, namely reflect-array (RA) and transmit-array (TA) antennas. We show that the precoders for RA and TA antennas have to meet different constraints compared to those for conventional MIMO architectures. Taking these constraints into account and exploiting the sparsity of mmWave channels, we design an efficient precoder for RA and TA antennas based on the orthogonal matching pursuit algorithm. Furthermore, in order to fairly compare the performance of RA and TA antennas with conventional fully-digital and hybrid MIMO architectures, we develop a unified power consumption model. Our simulation results show that unlike conventional MIMO architectures, RA and TA antennas are highly energy efficient and fully scalable in terms of the number of transmit antennas.

cs.IT↗

arXiv2018

Diffusive Mobile MC for Controlled-Release Drug Delivery with Absorbing Receiver

Nanoparticle drug carriers play an important role in facilitating efficient targeted drug delivery, i.e., improving treatment success and reducing drug costs and side effects. However, the mobility of nanoparticle drug carriers poses a challenge in designing drug delivery systems. Moreover, healing results critically depend on the rate and time duration of drug absorption. Therefore, in this paper, we aim to design a controlled-release drug delivery system with a mobile drug carrier that minimizes the total amount of released drugs while ensuring a desired rate of drug absorption during a prescribed time period. We model the mobile drug carrier as a mobile transmitter, the targeted diseased cells as an absorbing receiver, and the channel between the transceivers as a time-variant channel since the carrier mobility results in a time-variant absorption rate of the drug molecules. Based on this, we develop a molecular communication (MC) framework to design the controlled-release drug delivery system. In particular, we develop new analytical expressions for the mean, variance, probability density function, and cumulative distribution function of the channel impulse response (CIR). Equipped with the statistical analysis of the CIR, we design and evaluate the performance of the controlled-release drug delivery system. Numerical results show significant savings in the amount of released drugs compared to a constant-release rate design and reveal the necessity of accounting for drug carrier mobility for reliable drug delivery.

physics.med-ph↗

arXiv2018

C-RAN with Hybrid RF/FSO Fronthaul Links: Joint Optimization of RF Time Allocation and Fronthaul Compression

This paper considers the uplink of a cloud radio access network (C-RAN) comprised of several multi-antenna remote radio units (RUs) which compress the signals that they receive from multiple mobile users (MUs) and forward them to a CU via wireless fronthaul links. To enable reliable high rate fronthaul links, we employ a hybrid radio frequency (RF)/free space optical (FSO) system for fronthauling. To strike a balance between complexity and performance, we consider three different quantization schemes at the RUs, namely per-antenna vector quantization (AVQ), per-RU vector quantization (RVQ), and distributed source coding (DSC), and two different receivers at the CU, namely the linear minimum mean square error receiver and the optimal successive interference cancellation receiver. For this network architecture, we investigate the joint optimization of the quantization noise covariance matrices at the RUs and the RF time allocation to the multiple-access and fronthaul links for rate region maximization. To this end, we formulate a unified weighted sum rate maximization problem valid for each possible pair of the considered quantization and detection schemes. To handle the non-convexity of the unified problem, we transform it into a bi-convex problem which facilitates the derivation of an efficient suboptimal solution using alternating convex optimization and golden section search. Our simulation results show that for each pair of the considered quantization and detection schemes, C-RAN with hybrid RF/FSO fronthauling can achieve a considerable sum rate gain compared to conventional systems employing pure FSO fronthauling, especially under unfavorable atmospheric conditions. Moreover, employing a more sophisticated quantization scheme can significantly improve the system performance under adverse atmospheric conditions.

cs.IT↗

arXiv2018

Biological Optical-to-Chemical Signal Conversion Interface: A Small-scale Modulator for Molecular Communications

Although many exciting applications of molecular communication (MC) systems are envisioned to be at microscale, the MC testbeds reported so far are mostly at macroscale. To link the macroworld to the microworld, we propose and demonstrate a biological signal conversion interface that can also be seen as a microscale modulator. In particular, the proposed interface transduces an optical signal, which is controlled using an LED, into a chemical signal by changing the pH of the environment. The modulator is realized using E. coli bacteria as microscale entity expressing the light-driven proton pump gloeorhodopsin from Gloeobacter violaceus. Upon inducing external light stimuli, these bacteria locally change their surrounding pH level by exporting protons into the environment. To verify the effectiveness of the proposed optical-to-chemical signal converter, we analyze the pH signal measured by a pH sensor, which serves as receiver. We develop an analytical parametric model for the induced chemical signal as a function of the applied optical signal. Using this model, we derive a training-based channel estimator which estimates the parameters of the proposed model to fit the measurement data. We further derive the optimal maximum likelihood detector and a suboptimal low-complexity detector to recover the transmitted data from the measured received signal. It is shown that the proposed parametric model is in good agreement with the measurement data. Moreover, for an example scenario, we show that the proposed setup is able to successfully convert an optical signal representing a sequence of binary symbols into a chemical signal with a bit rate of 1 bit/minute and recover the transmitted data from the chemical signal using the proposed estimation and detection~schemes. The proposed modulator may form the basis for future MC testbeds and applications at microscale.

cs.ET↗

arXiv2018

Stochastic Channel Modeling for Diffusive Mobile Molecular Communication Systems

In this paper, we develop a mathematical framework for modeling the time-variant stochastic channels of diffusive mobile MC systems. In particular, we consider a diffusive mobile MC system consisting of a pair of transmitter and receiver nano-machines suspended in a fluid medium with a uniform bulk flow, where we assume that either the transmitter, or the receiver, or both are mobile and we model the mobility by Brownian motion. The transmitter and receiver nano-machines exchange information via diffusive signaling molecules. Due to the random movements of the transmitter and receiver nano-machines, the statistics of the channel impulse response (CIR) change over time. We derive closed-form expressions for the mean, the autocorrelation function (ACF), the cumulative distribution function (CDF), and the probability density function (PDF) of the time-variant CIR. Exploiting the ACF, we define the coherence time of the time-variant MC channel as a metric for characterization of the variations of the CIR. The derived CDF is employed for calculation of the outage probability of the system. We also show that under certain conditions, the PDF of the CIR can be accurately approximated by a Log-normal distribution. Based on this approximation, we derive a simple model for outdated channel state information (CSI). Moreover, we derive an analytical expression for evaluation of the expected error probability of a simple detector for the considered MC system. In order to investigate the impact of CIR decorrelation over time, we compare the performances of a detector with perfect CSI knowledge and a detector with outdated CSI knowledge. The accuracy of the proposed analytical expressions is verified via particle-based simulation of the Brownian motion.

cs.IT↗

arXiv2018

Early Cancer Detection in Blood Vessels Using Mobile Nanosensors

In this paper, we propose using mobile nanosensors (MNSs) for early stage anomaly detection. For concreteness, we focus on the detection of cancer cells located in a particular region of a blood vessel. These cancer cells produce and emit special molecules, so-called biomarkers, which are symptomatic for the presence of anomaly, into the cardiovascular system. Detection of cancer biomarkers with conventional blood tests is difficult in the early stages of a cancer due to the very low concentration of the biomarkers in the samples taken. However, close to the cancer cells, the concentration of the cancer biomarkers is high. Hence, detection is possible if a sensor with the ability to detect these biomarkers is placed in the vicinity of the cancer cells. Therefore, in this paper, we study the use of MNSs that are injected at a suitable injection site and can move through the blood vessels of the cardiovascular system, which potentially contain cancer cells. These MNSs can be activated by the biomarkers close to the cancer cells, where the biomarker concentration is sufficiently high. Eventually, the MNSs are collected by a fusion center (FC) where their activation levels are read and exploited to declare the presence of anomaly. We analytically derive the biomarker concentration as well as the probability mass function of the MNSs' activation levels and validate the obtained results via particle-based simulations. Then, we derive the optimal decision rule for the FC regarding the presence of anomaly assuming that the entire network is known at the FC. Finally, for the FC, we propose a simple sum detector that does not require knowledge of the network topology. Our simulations reveal that while the optimal detector achieves a higher performance than the sum detector, both proposed detectors significantly outperform a benchmark scheme that used fixed nanosensors at the FC.

q-bio.TO↗

arXiv2018

Advanced Target Detection via Molecular Communication

In this paper, we consider target detection in suspicious tissue via diffusive molecular communications (MCs). If a target is present, it continuously and with a constant rate secretes molecules of a specific type, so-called biomarkers, into the medium, which are symptomatic for the presence of the target. Detection of these biomarkers is challenging since due to the diffusion and degradation, the biomarkers are only detectable in the vicinity of the target. In addition, the exact location of the target within the tissue is not known. In this paper, we propose to distribute several reactive nanosensors (NSs) across the tissue such that at least some of them are expected to come in contact with biomarkers, which cause them to become activated. Upon activation, an NS releases a certain number of molecules of a secondary type into the medium to alert a fusion center (FC), where the final decision regarding the presence of the target is made. In particular, we consider a composite hypothesis testing framework where it is assumed that the location of the target and the biomarker secretion rate are unknown, whereas the locations of the NSs are known. We derive the uniformly most powerful (UMP) test for the detection at the NSs. For the final decision at the FC, we show that the UMP test does not exist. Hence, we derive a genie-aided detector as an upper bound on performance. We then propose two sub-optimal detectors and evaluate their performance via simulations

cs.ET↗

arXiv2018

Biological Optical-to-Chemical Signal Conversion Interface: A Small-scale Modulator for Molecular Communications

Although many exciting applications of molecular communication (MC) systems are envisioned to be at microscale, the available MC testbeds reported in the literature so far are mostly at macroscale. This may partially be due to the fact that controlling an MC system at microscale is quite challenging. To link the macroworld to the microworld, we propose a biological signal conversion interface that can also be seen as a microscale modulator. This interface translates an optical signal, which can be easily controlled using a light-emitting diode (LED), into a chemical signal by changing the pH of the environment. The modulator is realized using \textit{Escherichia coli} bacteria that express the light-driven proton pump gloeorhodopsin from \textit{Gloeobacter violaceus}. Upon inducing external light stimuli, these bacteria can locally change their surrounding pH level by exporting protons into the environment. Based on measurement data from a testbed, we develop an analytical model for the induced chemical signal as a function of the applied optical signal. Finally, using a pH sensor as detector, we show for an example scenario that the proposed setup is able to successfully convert an optical signal representing a sequence of binary symbols into a chemical signal with a bit rate of $1$~bit/min.

cs.ET↗

arXiv2018

Experimental Molecular Communication Testbed Based on Magnetic Nanoparticles in Duct Flow

Simple and easy to implement testbeds are needed to further advance molecular communication research. To this end, this paper presents an in-vessel molecular communication testbed using magnetic nanoparticles dispersed in an aqueous suspension as they are also used for drug targeting in biotechnology. The transmitter is realized by an electronic pump for injection via a Y-connector. A second pump provides a background flow for signal propagation. For signal reception, we employ a susceptometer, an electronic device including a coil, where the magnetic particles move through and generate an electrical signal. We present experimental results for the transmission of a binary sequence and the system response following a single injection. For this flow-driven particle transport, we propose a simple parameterized mathematical model for evaluating the system response.

cs.ET↗

arXiv2017

On the Capacity of SWIPT Systems with a Nonlinear Energy Harvesting Circuit

In this paper, we study information-theoretic limits for simultaneous wireless information and power transfer (SWIPT) systems employing a practical nonlinear radio frequency (RF) energy harvesting (EH) receiver. In particular, we consider a three-node system with one transmitter that broadcasts a common signal to separated information decoding (ID) and EH receivers. Owing to the nonlinearity of the EH receiver circuit, the efficiency of wireless power transfer depends significantly on the waveform of the transmitted signal. In this paper, we aim to answer the following fundamental question: What is the optimal input distribution of the transmit waveform that maximizes the rate of the ID receiver for a given required harvested power at the EH receiver? In particular, we study the capacity of a SWIPT system impaired by additive white Gaussian noise (AWGN) under average-power (AP) and peak-power (PP) constraints at the transmitter and an EH constraint at the EH receiver. Using Hermite polynomial bases, we prove that the optimal capacity-achieving input distribution that maximizes the rate-energy region is unique and discrete with a finite number of mass points. Furthermore, we show that the optimal input distribution for the same problem without PP constraint is discrete whenever the EH constraint is active and continuous zero-mean Gaussian, otherwise. Our numerical results show that the rate-energy region is enlarged for a larger PP constraint and that the rate loss of the considered SWIPT system compared to the AWGN channel without EH receiver is reduced by increasing the AP budget.

cs.IT↗