arXiv subjects

Val Zwiller

Publications and source records attributed to Val Zwiller.

At least 37 records · Page 2Linked to original sources

arXiv2023

Coexistence of extended and localized states in finite-sized mosaic Wannier-Stark lattices

Quantum transport and localization are fundamental concepts in condensed matter physics. It is commonly believed that in one-dimensional systems, the existence of mobility edges is highly dependent on disorder. Recently, there has been a debate over the existence of an exact mobility edge in a modulated mosaic model without quenched disorder, the so-called mosaic Wannier-Stark lattice. Here, we experimentally implement such disorder-free mosaic photonic lattices using a silicon photonics platform. By creating a synthetic electric field, we could observe energy-dependent coexistence of both extended and localized states in a finite number of waveguides. The Wannier-Stark ladder emerges when the resulting potential is strong enough, and can be directly probed by exciting different spatial modes of the lattice. Our studies provide the experimental proof of coexisting sets of strongly localized and conducting (though weakly localized) states in finite-sized mosaic Wannier-Stark lattices, which hold the potential to encode high-dimensional quantum resources with compact and robust structures.

cond-mat.dis-nn↗

arXiv2023

Dynamic strain modulation of a nanowire quantum dot compatible with a thin-film lithium niobate photonic platform

The integration of on-demand single photon sources in photonic circuits is a major prerequisite for on-chip quantum applications. Among the various high-quality sources, nanowire quantum dots can be efficiently coupled to optical waveguides because of their preferred emission direction along their growth direction. However, local tuning of the emission properties remains challenging. In this work, we transfer a nanowire quantum dot on a bulk lithium niobate substrate and show that its emission can be dynamically tuned by acousto-optical coupling with surface acoustic waves. The purity of the single photon source is preserved during the strain modulation. We further demonstrate that the transduction is maintained even with a SiO2 encapsulation layer deposited on top of the nanowire acting as the cladding of a photonic circuit. Based on these experimental findings and numerical simulations, we introduce a device architecture consisting of a nanowire quantum dot efficiently coupled to a thin film lithium niobate rib waveguide and strain-tunable by surface acoustic waves.

cond-mat.mes-hall↗

arXiv2023

Nanowire-based Integrated Photonics for Quantum Information and Quantum Sensing

At the core of quantum photonic information processing and sensing, two major building pillarsare single-photon emitters and single-photon detectors. In this review, we systematically summarize the working theory, material platform, fabrication process, and game-changing applications enabled by state-of-the-art quantum dots in nanowire emitters and superconducting nanowire single-photon detectors. Such nanowire-based quantum hardware offers promising properties for modern quantum optics experiments.We highlight several burgeoning quantum photonics applications using nanowires and discuss development trends of integrated quantum photonics. Also, we propose quantum information processing and sensing experiments for the quantum optics community, and future interdisciplinary applications.

quant-ph↗

arXiv2023

Scalable generation and detection of on-demand W states in nanophotonic circuits

Quantum physics phenomena, entanglement and coherence, are crucial for quantum information protocols, but understanding these in systems with more than two parts is challenging due to increasing complexity. The W state, a multipartite entangled state, is notable for its robustness and benefits in quantum communication. Here, we generate an 8-mode on-demand single photon W states, using nanowire quantum dots and a silicon nitride photonic chip. We demonstrate a reliable, scalable technique for reconstructing W-state in photonic circuits using Fourier and real-space imaging, supported by the Gerchberg-Saxton phase retrieval algorithm. Additionally, we utilize an entanglement witness to distinguish between mixed and entangled states, thereby affirming the entangled nature of our generated state. The study provides a new imaging approach of assessing multipartite entanglement in W-states, paving the way for further progress in image processing and Fourier-space analysis techniques for complex quantum systems.

quant-ph↗

arXiv2023

Oscillating photonic Bell state from a semiconductor quantum dot for quantum key distribution

An on-demand source of bright entangled photon pairs is desirable for quantum key distribution (QKD) and quantum repeaters. The leading candidate to generate entangled photon pairs is based on spontaneous parametric down-conversion (SPDC) in a non-linear crystal. However, there exists a fundamental trade-off between entanglement fidelity and efficiency in SPDC sources due to multiphoton emission at high brightness, which limits the pair extraction efficiency to 0.1% when operating at near-unity fidelity. Quantum dots in photonic nanostructures can in principle overcome this trade-off; however, the quantum dots that have achieved entanglement fidelities on par with SPDC sources (99%) have poor pair extraction efficiencies of 0.01%. Here, we demonstrate a 65-fold increase in the pair extraction efficiency compared to quantum dots with equivalent peak fidelity from an InAsP quantum dot in a photonic nanowire waveguide. We measure a raw peak concurrence and fidelity of 95.3% $\pm$ 0.5% and 97.5% $\pm$ 0.8%, respectively. Finally, we show that an oscillating two-photon Bell state generated by a semiconductor quantum dot can be utilized to establish a secure key for QKD, alleviating the need to remove the quantum dot energy splitting of the intermediate exciton states in the biexciton-exciton cascade.

quant-ph↗

arXiv2023

Observation of reentrant metal-insulator transition in a random-dimer disordered SSH lattice

The interrelationship between localization, quantum transport, and disorder has remained a fascinating focus in scientific research. Traditionally, it has been widely accepted in the physics community that in one-dimensional systems, as disorder increases, localization intensifies, triggering a metal-insulator transition. However, a recent theoretical investigation [Phys. Rev. Lett. 126, 106803] has revealed that the interplay between dimerization and disorder leads to a reentrant localization transition, constituting a remarkable theoretical advancement in the field. Here, we present the experimental observation of reentrant localization using an experimentally friendly model, a photonic SSH lattice with random-dimer disorder, achieved by incrementally adjusting synthetic potentials. In the presence of correlated on-site potentials, certain eigenstates exhibit extended behavior following the localization transition as the disorder continues to increase. We directly probe the wave function in disordered lattices by exciting specific lattice sites and recording the light distribution. This reentrant phenomenon is further verified by observing an anomalous peak in the normalized participation ratio. Our study enriches the understanding of transport in disordered mediums and accentuates the substantial potential of integrated photonics for the simulation of intricate condensed matter physics phenomena.

cond-mat.dis-nn↗

arXiv2023

Coherent Quantum Interconnection between On-Demand Quantum Dot Single Photons and a Resonant Atomic Quantum Memory

Long-range quantum communication requires the development of in-out light-matter interfaces to achieve a quantum advantage in entanglement distribution. Ideally, these quantum interconnections should be as fast as possible to achieve high-rate entangled qubits distribution. Here, we demonstrate the coherent quanta exchange between single photons generated on-demand from a GaAs quantum dot and atomic ensemble in a $^{87}$Rb vapor quantum memory. Through an open quantum system analysis, we demonstrate the mapping between the quantized electric field of photons and the coherence of the atomic ensemble. Our results play a pivotal role in understanding quantum light-matter interactions at the short time scales required to build fast hybrid quantum networks.

quant-ph↗

arXiv2022

Highly-Excited Rydberg Excitons in Synthetic Thin-Film Cuprous Oxide

Cuprous oxide (Cu${}_2$O) has recently been proposed as a promising solid-state host for excitonic Rydberg states with large principal quantum numbers ($n$), whose exaggerated wavefunction sizes ($\propto n^2)$ facilitate gigantic dipole-dipole ($\propto n^4$) and van der Waals ($\propto n^{11}$) interactions, making them an ideal basis for solid-state quantum technology. Synthetic, thin-film Cu${}_2$O samples are of particular interest because they can be made defect-free via carefully controlled fabrication and are, in principle, suitable for the observation of extreme single-photon nonlinearities caused by the Rydberg blockade. Here, we present spectroscopic absorption and photoluminescence studies of Rydberg excitons in synthetic Cu${}_2$O grown on a transparent substrate, reporting yellow exciton series up to $n = 7$. We perform these studies at powers up to 2 mW and temperatures up to 150 K, the highest temperature where Rydberg series can be observed. These results open a new portal to scalable and integrable on-chip Rydberg-based quantum devices.

quant-ph↗

arXiv2022

Nanosecond gating of superconducting nanowire single-photon detectors using cryogenic bias circuitry

Superconducting nanowire single-photon detectors (SNSPDs) show near unity efficiency, low dark count rate, and short recovery time. Combining these characteristics with temporal control of SNSPDs broadens their applications as in active de-latching for higher dynamic range counting or temporal filtering for pump-probe spectroscopy or LiDAR. To that end, we demonstrate active gating of an SNSPD with a minimum off-to-on rise time of 2.4 ns and a total gate length of 5.0 ns. We show how the rise time depends on the inductance of the detector in combination with the control electronics. The gate window is demonstrated to be fully and freely, electrically tunable up to 500 ns at a repetition rate of 1.0 MHz, as well as ungated, free-running operation. Control electronics to generate the gating are mounted on the 2.3 K stage of a closed-cycle sorption cryostat, while the detector is operated on the cold stage at 0.8 K. We show that the efficiency and timing jitter of the detector is not altered during the on-time of the gating window. We exploit gated operation to demonstrate a method to increase in the photon counting dynamic range by a factor 11.2, as well as temporal filtering of a strong pump in an emulated pump-probe experiment.

physics.ins-det↗

arXiv2022

Fractal superconducting nanowires detect infrared single photons with 84% system detection efficiency, 1.02 polarization sensitivity, and 20.8 ps timing resolution

The near-unity system detection efficiency (SDE) and excellent timing resolution of superconducting nanowire single-photon detectors (SNSPDs), combined with their other merits, have enabled many classical and quantum photonic applications. However, the prevalent design based on meandering nanowires makes SDE dependent on the polarization states of the incident photons; for unpolarized light, the major merit of high SDE would get compromised, which could be detrimental for photon-starved applications. Here, we create SNSPDs with an arced fractal geometry that almost completely eliminates this polarization dependence of the SDE, and we experimentally demonstrate 84$\pm$3$\%$ SDE, 1.02$^{+0.06}_{-0.02}$ polarization sensitivity at the wavelength of 1575 nm, and 20.8 ps timing jitter in a 0.1-W closed-cycle Gifford-McMahon cryocooler, at the base temperature of 2.0 K. This demonstration provides a novel, practical device structure of SNSPDs, allowing for operation in the visible, near-, and mid-infrared spectral ranges, and paves the way for polarization-insensitive single-photon detection with high SDE and high timing resolution

quant-ph↗

arXiv2022

Current crowding in nanoscale superconductors within the Ginzburg-Landau model

The current density in a superconductor with turnarounds or constrictions is non-uniform due to a geometrical current crowding effect. This effect reduces the critical current in the superconducting structure compared to a straight segment and is of importance when designing superconducting devices. We investigate the current crowding effect in numerical simulations within the generalized time-dependent Ginzburg-Landau (GTDGL) model. The results are validated experimentally by measuring the magnetic field dependence of the critical current in superconducting nanowire structures, similar to those employed in single-photon detector devices. Comparing the results with London theory, we conclude that the reduction in critical current is significantly smaller in the GTDGL model. This difference is attributed to the current redistribution effect, which reduces the current density in weak points of the superconductor and counteracts the current crowding effect. We numerically investigate the effect of fill factor on the critical current in a meander and conclude that the reduction of critical current is low enough to justify fill factors higher than $33\,\%$ for applications where detection efficiency is critical. Finally, we propose a novel meander design which can combine high fill factor and low current crowding.

cond-mat.supr-con↗

arXiv2022

2022 Roadmap for Materials for Quantum Technologies

Quantum technologies are poised to move the foundational principles of quantum physics to the forefront of applications. This roadmap identifies some of the key challenges and provides insights on materials innovations underlying a range of exciting quantum technology frontiers. Over the past decades, hardware platforms enabling different quantum technologies have reached varying levels of maturity. This has allowed for first proof-of-principle demonstrations of quantum supremacy, for example quantum computers surpassing their classical counterparts, quantum communication with reliable security guaranteed by laws of quantum mechanics, and quantum sensors uniting the advantages of high sensitivity, high spatial resolution, and small footprints. In all cases, however, advancing these technologies to the next level of applications in relevant environments requires further development and innovations in the underlying materials. From a wealth of hardware platforms, we select representative and promising material systems in currently investigated quantum technologies. These include both the inherent quantum bit systems as well as materials playing supportive or enabling roles, and cover trapped ions, neutral atom arrays, rare earth ion systems, donors in silicon, color centers and defects in wide-band gap materials, two-dimensional materials and superconducting materials for single-photon detectors. Advancing these materials frontiers will require innovations from a diverse community of scientific expertise, and hence this roadmap will be of interest to a broad spectrum of disciplines.

quant-ph↗

arXiv2021

Roadmap on Integrated Quantum Photonics

Integrated photonics is at the heart of many classical technologies, from optical communications to biosensors, LIDAR, and data center fiber interconnects. There is strong evidence that these integrated technologies will play a key role in quantum systems as they grow from few-qubit prototypes to tens of thousands of qubits. The underlying laser and optical quantum technologies, with the required functionality and performance, can only be realized through the integration of these components onto quantum photonic integrated circuits (QPICs) with accompanying electronics. In the last decade, remarkable advances in quantum photonic integration and a dramatic reduction in optical losses have enabled benchtop experiments to be scaled down to prototype chips with improvements in efficiency, robustness, and key performance metrics. The reduction in size, weight, power, and improvement in stability that will be enabled by QPICs will play a key role in increasing the degree of complexity and scale in quantum demonstrations. In the next decade, with sustained research, development, and investment in the quantum photonic ecosystem (i.e. PIC-based platforms, devices and circuits, fabrication and integration processes, packaging, and testing and benchmarking), we will witness the transition from single- and few-function prototypes to the large-scale integration of multi-functional and reconfigurable QPICs that will define how information is processed, stored, transmitted, and utilized for quantum computing, communications, metrology, and sensing. This roadmap highlights the current progress in the field of integrated quantum photonics, future challenges, and advances in science and technology needed to meet these challenges.

quant-ph↗

arXiv2021

Efficient and Versatile Toolbox for Analysis of Time-Tagged Measurements

Acquisition and analysis of time-tagged events is a ubiquitous tool in scientific and industrial applications. With increasing time resolution, number of input channels, and acquired events, the amount of data can be overwhelming for standard processing techniques. We developed the Extensible Time-tag Analyzer (ETA), a powerful and versatile, yet easy to use software to efficiently analyze and display time-tagged data. Our tool allows for flexible extraction of correlation from time-tagged data beyond start-stop measurements that were traditionally used. A combination of state diagrams and simple code snippets allows for analysis of arbitrary complexity while keeping computational efficiency high.

physics.ins-det↗

arXiv2021

Mid-infrared Single-photon Detection Using Superconducting NbTiN Nanowires with Sub-15 ps Time Resolution in a Gifford-McMahon Cryocooler

Shortly after their inception, superconducting nanowire single-photon detectors (SNSPDs) became the leading quantum light detection technology. With the capability of detecting single-photons with near-unity efficiency, high time resolution, low dark count rate, and fast recovery time, SNSPDs outperform conventional single-photon detection techniques. However, detecting lower energy single-photons (<0.8 eV) with high efficiency and low timing jitter has remained a challenge. To achieve unity internal efficiency at mid-infrared wavelengths, previous works used amorphous superconducting materials with low energy gaps at the expense of reduced time resolution (close to a nanosecond), and by operating them in complex mK dilution refrigerators. In this work, we provide an alternative approach with SNSPDs fabricated from 5-9.5 nm thick NbTiN superconducting films and devices operated in conventional Gifford-McMahon (GM) cryocoolers. By optimizing the superconducting film deposition process, film thickness and nanowire design, our fiber-coupled devices achieved > 70% system detection efficiency (SDE) at 2 μm and sub-15 ps timing jitter. Furthermore, detectors from the same batch demonstrated unity internal detection efficiency at 3 μm and 80% internal efficiency at 4 μm, paving the road for an efficient mid-infrared single-photon detection technology with unparalleled time resolution and without mK cooling requirements.

physics.ins-det↗

arXiv2021

Giant Rydberg excitons in Cu$_{2}$O probed by photoluminescence excitation spectroscopy

Rydberg excitons are, with their ultrastrong mutual interactions, giant optical nonlinearities, and very high sensitivity to external fields, promising for applications in quantum sensing and nonlinear optics at the single-photon level. To design quantum applications it is necessary to know how Rydberg excitons and other excited states relax to lower-lying exciton states. Here, we present photoluminescence excitation spectroscopy as a method to probe transition probabilities from various excitonic states in cuprous oxide, and we show giant Rydberg excitons at $T=38$ mK with principal quantum numbers up to $n=30$, corresponding to a calculated diameter of 3 $μ$m.

cond-mat.mes-hall↗

arXiv2020

Detecting Infrared Single Photons with Near-Unity System Detection Efficiency

Single photon detectors are indispensable tools in optics, from fundamental measurements to quantum information processing. The ability of superconducting nanowire single photon detectors to detect single photons with unprecedented efficiency, short dead time and high time resolution over a large frequency range enabled major advances in quantum optics. However, combining near-unity system detection efficiency with high timing performance remains an outstanding challenge. In this work, we show novel superconducting nanowire single photon detectors fabricated on membranes with 94-99.5 (plus minus 2.07%) system detection efficiency in the wavelength range 1280-1500 nm. The SiO2/Au membrane enables broadband absorption in small SNSPDs, offering high detection efficiency in combination with high timing performance. With low noise cryogenic amplifiers operated in the same cryostat, our efficient detectors reach timing jitter in the range of 15-26 ps. We discuss the prime challenges in optical design, device fabrication as well as accurate and reliable detection efficiency measurements to achieve high performance single-photon detection. As a result, the fast-developing fields of quantum information science, quantum metrology, infrared imaging and quantum networks will greatly benefit from this far-reaching quantum detection technology.

quant-ph↗

arXiv2020

Temporal array with superconducting nanowire single-photon detectors for photon-number-resolution

We present an experimental realization of a 16 element, temporal-array, photon-number-resolving (PNR) detector, which is a multiplexed single-photon detector that splits an input signal over multiple time-bins, and the time-bins are detected using two superconducting nanowire single-photon detectors (SNSPD). A theoretical investigation of the PNR capabilities of the detector is performed and it is concluded that compared to a single-photon detector, our array detector can resolve one order of magnitude higher mean photon numbers, given the same number of input pulses to measure. This claim is experimentally verified and we show that the detector can accurately predict photon numbers between $10^{-3}$ to $10^{2}$. Our present detector is incapable of single-shot photon-number measurements with high precision since its effective quantum efficiency is $49\,\%$. Using SNSPDs with a higher quantum efficiency the PNR performance will improve, but the photon-number resolution will still be limited by the array size.

quant-ph↗