arXiv subjects

Valentin Laguta

Publications and source records attributed to Valentin Laguta.

6 recordsLinked to original sources

arXiv2026

Multiferroic Properties of Electrospun CFO-BCTSn Nanocomposites for Magnetoelectric and Magnetic Field Sensing Applications

Multiferroic CFO-BCTSn composite nanofibers were synthesized using a sol-gel electrospinning method. Electron microscopy revealed well-defined fibers with diameters of 120-150 nm. Structural analyses using X-ray diffraction, Raman spectroscopy, and high-resolution transmission electron microscopy confirmed the coexistence of the spinel CFO phase and the perovskite BCTSn phase without detectable secondary phases. Magnetic hysteresis measurements demonstrated the magnetic behavior of the nanofibers, while piezoresponse force microscopy confirmed their piezoelectric properties. Magnetoelectric coupling was evidenced by differences between the magnetic hysteresis loops of electrically poled and unpoled samples. These lead-free composite nanofibers show potential for nanoscale magnetoelectric devices and magnetic field sensing applications.

cond-mat.mtrl-sci↗

arXiv2024

Impact of Polymeric precursor and Auto-combustion on the Structural, Microstructural, Magnetic, and Magnetocaloric Properties of La0.8Sr0.2MnO3

In this work, La0.8Sr0.2MnO3 (LSMO) nanopowders are synthesized using two different methods: Pechini (LSMO-PC) and auto-combustion (LSMO-AC). Nanoparticle sizes, structural, magnetic, and magnetocaloric properties were determined and compared. The X-ray diffraction confirms the coexistence of two phases; rhombohedral symmetry with space group R-3c and orthorhombic symmetry with space group Pbnm, with the rhombohedral phase dominating. The scanning electron microscope images show that LSMO-PC has larger nanoparticle sizes (~495 nm) than LSMO-AC (~195 nm). The samples exhibit ferromagnetic properties with distinct hysteresis loops and Curie temperatures 340 K and 290 K for LSMO-PC and LSMO-AC respectively. The variation of the magnetic entropy was measured indirectly using the Maxwell approach with increasing magnetic field. For LSMO-PC it reaches a maximum -dSM=1.69 J/kg.K at 340 K and dH= 5 T. The associated adiabatic temperature change dTM is 1.04 K. While LSMO-PC demonstrates superior magnetic and magnetocaloric properties, LSMO-AC displays significant magnetocaloric thermal stability. The obtained values make LSMO-PC and LSMO-AC promising candidates for eco-friendly room-temperature magnetocaloric applications.

cond-mat.mtrl-sci↗

arXiv2023

Magnetoelectric coupling in multiferroic CFO/BCTSn core shell nanofibers elaborated by co-axial electrospinning method

Multiferroic CoFe2O4-Ba0.95Ca0.05Ti0.89Sn0.11O3 core-shell nanofibers (CFO@BCTSn NFs) were synthesized by a sol-gel co-axial electrospinning technique. The scanning electron microscope and transmission electron microscope were used to check nanofibers' core-shell structure/configuration. X-ray diffraction and a high-resolution transmission electron microscope were used to confirm the spinel structure of CFO and the perovskite structure of BCTSn. The magnetic character of the resultant CFO@BCTSn NFs was determined by SQUID magnetometry. The piezoelectricity was verified using piezo-response force microscopy, which revealed an entirely covered ferroelectric shell outline, in accordance with SEM and TEM observations. The magnetoelectric (ME) coefficient was measured as a function of the applied external DC magnetic field. The maximum ME coefficient obtained for the CFO@BCTSn NFs was 346 mV cm-1 Oe-1. The high magnetoelectric coupling suggests that CFO@BCTSn NFs could be a promising candidate for magnetic field sensor and magnetoelectric device applications.

cond-mat.mtrl-sci↗

arXiv2023

Room-temperature magnetoelectric effect in lead-free multiferroic $(1-x)$ Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$-$(x)$CoFe$_2$O$_4$ particulate composites

Multiferroic particulate composites $(1-x)$ Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$-$(x)$CoFe$_2$O$_4$ with ($x$ = 0.1, 0.2, 0.3, 0.4 and 0.5) have been prepared by mechanical mixing of the calcined and milled individual ferroic phases. X-ray diffraction and Raman spectroscopy analysis confirmed the formation of both perovskite Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$ (BCTSn) and spinel CoFe$_2$O$_4$ (CFO) phases without the presence of additional phases. The morphological properties of the composites were provided by using Field Emission Scanning Electron Microscopy. The BCTSn-CFO composites exhibit multiferroic behavior at room temperature, as evidenced by ferroelectric and ferromagnetic hysteresis loops. The magnetoelectric (ME) coupling was measured under a magnetic field up to 10 kOe and the maximum ME response found to be 0.1 mV /cm/ Oe for the composition 0.7 BCTSn-0.3 CFO exhibiting a high degree of pseudo-cubicity and large density.

cond-mat.mtrl-sci↗

arXiv2022

Enhanced RCP and large inverse magnetocaloric effect of CoFe$_2$O$_4$ nanoparticles synthesized by auto-combustion method

This work focuses on the microstructure, magnetic properties and magnetocaloric effect of CoFe$_2$O$_4$ (CFO) nanoparticles elaborated by sol-gel auto combustion method. The XRD investigation indicates that CFO is crystallized in a cubic spinel structure and the SEM micrograph shows a fine quasi-spherical with an average grain sizes of 160 nm. The temperature dependence of the Raman spectra reveals the ferromagnetic to paramagnetic (FM-PM) transition started from 723 K and the magnetization versus temperature measurements shows the Curie temperature located at T$_{\rm C}$ = 785 K. Large value of magnetocaloric temperature change of $\Delta$T =11.2 K with a high RCP of 687.56 J Kg$^{-1}$ are achieved indirectly via the Maxwell approach making our CFO nanopowder suitable candidate for both environmentally friendly magnetic refrigeration and medical applications at ambient temperature.

cond-mat.mtrl-sci↗

arXiv2017

Unusual ferroelectric and magnetic phases in multiferroic 2H-BaMnO$_3$ ceramics

The structural phase transition in hexagonal BaMnO$_3$ occurring at $T_c$=130 K was studied in ceramic samples using electron and X-ray diffraction, second harmonic generation as well as by dielectric and lattice dynamic spectroscopies. The low-temperature phase (space group $P6_{3}cm$) is ferroelectric with a triplicated unit cell. The phase transition is driven by an optical soft mode from the Brillouin-zone boundary [$q = (\frac{1}{3},\frac{1}{3},0)$]; this mode activates in infrared and Raman spectra below $T_c$ and it hardens according to the Cochran law. Upon cooling below $T_c$, the permittivity exhibits an unusual linear increase with temperature; below 60 K, in turn, a frequency-dependent decrease is observed, which can be explained by slowing-down of ferroelectric domain wall motions. Based on our data we could not distinguish whether the high-temperature phase is paraelectric or polar (space groups $P6_{3}/mmc$ or $P6_{3}mc$, respectively). Both variants of the phase transition to the ferroelectric phase are discussed based on the Landau theory. Electron paramagnetic resonance and magnetic susceptibility measurements reveal an onset of one-dimensional antiferromagnetic ordering below $\approx220\,\rm K$ which develops fully near 140 K and, below $T_{n} \approx 59\,\rm K$, it transforms into a three-dimensional antiferromagnetic order.

cond-mat.mtrl-sci↗