arXiv subjects

Valentyn Volkov

Publications and source records attributed to Valentyn Volkov.

13 recordsLinked to original sources

arXiv2026

Hyperbolic-enhanced Raman scattering in van der Waals MoOCl2: from Fano resonances to picomolar detection

Natural van der Waals (vdW) crystals with hyperbolic dispersion challenge artificial metamaterials but remain confined to the mid-infrared. The emergence of MoOCl2, a quasi-one-dimensional metal with in-plane hyperbolicity, overcomes this spectral limit, shifting the focus to the practical visible range. Here, using angle-resolved polarized Raman spectroscopy, we uncover pronounced polarization-dependent Fano lineshapes that reveal coupling between phonons and the anisotropic metallic continuum, together with strong wavelength-dependent reshaping of the Raman polarization patterns governed by the anisotropic optical response of MoOCl2. Harnessing this optical anisotropy, we demonstrate "Hyperbolic-Enhanced Raman" (HypER) scattering, where MoOCl2 provides polarization-tunable analytical enhancement factors exceeding 10^7 and picomolar-level detection of Rhodamine 6G down to 100 pM, without deliberate surface nanostructuring. These results establish air-stable MoOCl2 as a simple, wafer-compatible platform for visible-range hyperbolic nanophotonics and lithography-free sensing.

physics.optics↗

arXiv2026

Deep-Subwavelength and Broadband Quarter-Wave Retardation in Ultrathin Hyperbolic MoOCl2

The miniaturization of polarization-controlling optical components is one of the central pursuits in nanophotonics. While traditional anisotropic materials require large propagation lengths to achieve the desired phase shifts, metasurfaces mitigate this size constraint but often introduce narrow operational bandwidths and high fabrication complexities. To bridge this gap, we introduce MoOCl2 as a promising material for ultracompact and broadband phase retardation. Building on its giant optical anisotropy, we experimentally demonstrate MoOCl2 quarter-wave plates with thicknesses of 77 nm and 98 nm. These flakes exhibit achromatic quarter-wave retardation across broad visible (445 - 525 nm) and near-infrared (730 - 945 nm) spectral windows, surpassing the fundamental thickness and bandwidth limitations of both conventional optical materials and artificial nanostructures. Moreover, MoOCl2 waveplates demonstrate up to lambda/4500 retardance tolerance at central wavelengths. As a result, this study establishes MoOCl2 as a building block for ultracompact polarization optics.

physics.optics↗

arXiv2025

Scalable van der Waals Photonics: High-Refractive-Index Gallium Sulfide Films with Single-Crystal Optical Properties

The integration of high-refractive-index dielectrics into scalable photonic architectures is foundational to advancing integrated circuits and augmented reality (AR) displays. Van der Waals (vdW) materials offer exceptional optical properties, including high refractive indices and giant anisotropy, but their implementation is constrained by the small area and uncontrolled thickness of mechanically exfoliated flakes. Here, we demonstrate that atomic layer deposition (ALD) grown gallium sulfide (GaS) overcomes the trade-off between high optical performance and manufacturability, emerging as a large-scale vdW dielectric platform. Through rigorous optical and structural benchmarking against pristine single crystals, we establish that the optical constants (n, k) of ALD-GaS are virtually indistinguishable from single-crystal counterparts. By leveraging the retained out-of-plane anisotropy, we demonstrate that ALD-GaS enables superior suppression of crosstalk in densely integrated waveguides compared to conventional scalable high-index platforms. Our findings establish ALD-GaS as a technologically viable pathway for implementing anisotropic vdW materials in visible-spectrum photonics.

physics.optics↗

arXiv2025

Solvent-Directed Femtosecond Laser Ablation: Tuning Phase and Defect Engineering in Hybrid CdPS3/CdS Nanostructures

The limited visible-light absorption of wide-bandgap van der Waals crystals fundamentally restricts their utility in solar energy conversion. Here, we report a surfactant-free, solvent-directed laser synthesis strategy to engineer the phase and optoelectronic properties of Cadmium Phosphorus Trisulfide (CdPS3). By exploiting the non-equilibrium thermodynamics of femtosecond pulsed laser ablation in liquid (fs-PLAL), we demonstrate a tunable transition from the stoichiometric ternary phase to a highly active binary-rich heterostructure. While ablation in water preserves the monoclinic CdPS3 lattice, the reducing environment of isopropanol triggers the formation of CdS quantum dots and metallic cadmium defect sites. This solvent-induced phase engineering transforms the ultraviolet-active host into a robust visible-light photocatalyst. The resulting hybrid CdPS3/CdS nanocolloids exhibit superior charge separation efficiency, driven by Schottky-like metal-semiconductor junctions, achieving ~ 90% degradation of Methylene Blue under 532 nm irradiation within 30 minutes. This work establishes fs-PLAL as a scalable defect-engineering tool for complex ternary layered materials, offering a new design of high-performance metal-thiophosphate-based photocatalysts.

physics.app-ph↗

arXiv2025

Giant optical anisotropy and visible-frequency epsilon-near-zero in hyperbolic van der Waals MoOCl2

The realization of extreme optical anisotropy is foundational to nanoscale light manipulation. Van der Waals (vdW) crystal MoOCl2 has emerged as a promising candidate for this quest, hosting hyperbolic plasmon polaritons in the visible and near-infrared wavelengths. However, the fundamental anisotropic dielectric tensor governing this behavior has remained elusive. Here, we resolve this problem by providing the first experimental determination of the full dielectric tensor of hyperbolic vdW MoOCl2. Via spectroscopic ellipsometry, Mueller matrix, and reflectance measurements, we quantify the material's optical duality: a metallic optical response (ε_1 < 0) along the crystallographic a-axis and a dielectric response (ε_1 > 0) along the orthogonal directions. This dichotomy drives an epsilon-near-zero (ENZ) condition at \approx 512 nm and results in giant in-plane birefringence of δn \approx 2.2 for MoOCl2. As a result, our work provides the critical missing experimental parameters for MoOCl2, establishing it as a benchmark hyperbolic and ENZ material.

physics.optics↗

arXiv2025

Giant optical anisotropy in CrSBr from giant exciton oscillator strength

The interplay between dimensionality and electronic correlations in van der Waals (vdW) materials offers a powerful toolkit for engineering light-matter interactions at the nanoscale. Excitons, bound electron-hole pairs, are central to this endeavor, yet maximizing their oscillator strength, which dictates the interaction cross-section, remains a challenge. Conventional wisdom suggests a trade-off, where the observable oscillator strength often decreases in strongly bound systems due to population dynamics. Here, we unveil a colossal oscillator strength associated with the quasi-one-dimensional (quasi-1D) excitons in the layered magnetic semiconductor CrSBr, which fundamentally defies this established scaling law. Through comprehensive optical characterization and ab initio calculations, we establish that this anomalous enhancement originates directly from the reduced dimensionality, which enforces an increased electron-hole wavefunction overlap. Moreover, we find a close connection between fundamental exciton and local spin fluctuations that contribute to the opening of the gap in the electronic spectrum. The resulting optical anisotropy shows a giant in-plane birefringence (Delta_n = 1.45) and profoundly anisotropic waveguiding, which we directly visualize using nano-optical imaging. Leveraging this extreme response, we realize a true zero-order quarter-wave plate with an unprecedented wavelength-to-thickness ratio (lambda/t) exceeding 3.4, surpassing the limits of current miniaturization technologies, including state-of-the-art metasurfaces. Our findings underscore the profound impact of dimensionality engineering in magnetic vdW materials for realizing novel regimes of light-matter coupling and developing next-generation ultracompact photonic architectures.

cond-mat.mtrl-sci↗

arXiv2025

Laser-Synthesized Amorphous PdSe$_{\mathrm{2-x}}$ Nanoparticles: A Defect-Rich Platform for High-Efficiency SERS, Photocatalysis, and Photothermal Conversion

The control of material properties at the atomic scale remains a central challenge in materials science. Transition metal dichalcogenides (TMDCs) offer remarkable electronic and optical properties, but their functionality is largely dictated by their stable crystalline phases. Here we demonstrate a single-step, ligand-free strategy using femtosecond laser ablation in liquid to transform crystalline, stoichiometric palladium diselenide (PdSe$_{\mathrm{2}}$) into highly stable, amorphous, and non-stoichiometric nanoparticles (PdSe$_{\mathrm{2-x}}$, with x$\approx$1). This laser-driven amorphization creates a high density of selenium vacancies and coordinatively unsaturated sites, which unlock a range of emergent functions absent in the crystalline precursor, including plasmon-free surface-enhanced Raman scattering with an enhancement factor exceeding 10$^\mathrm{6}$, a 50-fold increase in photocatalytic activity, and near-infrared photothermal conversion efficiency reaching 83$\%$. Our findings establish laser-induced amorphization as a powerful top-down approach for defect-engineered TMDCs and advances their practical usage in optics, catalysis, and nanomedicine.

cond-mat.mtrl-sci↗

arXiv2025

Influence of oxygen-defects on intraband terahertz conductivity of carbon nanotubes

The exceptional charge transport properties of single-walled carbon nanotubes (SWCNTs) enable numerous ultrafast optoelectronic applications. Modifying SWCNTs by introducing defects significantly impacts the performance of nanotube-based devices, making defect characterization crucial. This research tracked these effects in oxygen plasma-treated SWCNT thin films. Sub-picosecond electric fields of varying strengths and additional photoexcitation were used to assess how defects influence charge carrier transport. Changes in effective conductivity within the terahertz (THz) range were found to be strongly dependent on impurity levels. The plasmon resonance shift to higher THz frequencies aligns with the defect-induced reduction in conductivity and slowed carrier migration within the network. An increase in THz field strength resulted in diminished conductivity due to intraband absorption bleaching. To address the emergence of hot charge carriers, a modified Drude model, which considers non-equilibrium charge carrier distribution via fielddependent scattering rates, was applied. The dominant charge-impurity scattering rate in plasma-treated samples corresponded with an increase in defects. Additionally, the impact of defects on charge carrier dynamics on a picosecond timescale was examined. The modeled plasma-treated SWCNTs wire-grid polarizer for the THz range reveals the potential for multi-level engineering of THz devices to customize properties through controlled defect populations.

cond-mat.mtrl-sci↗

arXiv2025

Roadmap for Photonics with 2D Materials

Triggered by the development of exfoliation and the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals currently constitute a wide research field protruding in multiple directions in combination with layer stacking and twisting, nanofabrication, surface-science methods, and integration into nanostructured environments. Photonics encompasses a multidisciplinary collection of those directions, where 2D materials contribute with polaritons of unique characteristics such as strong spatial confinement, large optical-field enhancement, long lifetimes, high sensitivity to external stimuli (e.g., electric and magnetic fields, heating, and strain), a broad spectral range from the far infrared to the ultraviolet, and hybridization with spin and momentum textures of electronic band structures. The explosion of photonics with 2D materials as a vibrant research area is producing breakthroughs, including the discovery and design of new materials and metasurfaces with unprecedented properties as well as applications in integrated photonics, light emission, optical sensing, and exciting prospects for applications in quantum information, and nanoscale thermal transport. This Roadmap summarizes the state of the art in the field, identifies challenges and opportunities, and discusses future goals and how to meet them through a wide collection of topical sections prepared by leading practitioners.

cond-mat.mtrl-sci↗

arXiv2024

Tunable Nanostructuring for van der Waals Materials

Van der Waals (vdW) materials are becoming increasingly popular in scientific and industrial applications because of their unique mixture of record electronic, optical, and mechanical properties. However, nanostructuring of vdW materials is still in its infancy and strongly depends on the specific vdW crystal. As a result, the universal self-assembled technology of vdW materials nanostructuring opens vast technological prospects. This work demonstrates an express and universal synthesis method of vdW nanoparticles with well-defined geometry using femtosecond laser ablation and fragmentation. The disarming simplicity of the technique allows us to create nanoparticles from over 50 vdW precursor materials covering transition metal chalcogenides, MXenes, and other vdW materials. Obtained nanoparticles manifest perfectly defined crystalline structures and diverse shapes, from nanospheres to nanocubes and nanotetrahedrons. Thus, our work provides a new paradigm for vdW nanostructuring with a vast potential of tunability for size, shape, and materials specific to the particular application.

physics.app-ph↗

arXiv2024

Anisotropic van der Waals Crystal with High Refractive Index and Transparency for UV-Visible Range Applications

Thanks to their record high refractive index and giant optical anisotropy, van der Waals (vdW) materials have accelerated the development of nanophotonics. However, traditional high refractive index materials, such as titanium dioxide (TiO2), still dominate in the most important visible range. This is due to the current lack of transparent vdW materials across the entire visible spectrum. In this context, we propose that germanium disulfide (GeS2) could offer a significant breakthrough. With its high refractive index, negligible losses, and biaxial optical anisotropy across the whole visible range, GeS2 has the potential to complement TiO2 and close the application gap of vdW materials in the visible spectrum. The addition of GeS2 could have a profound impact on the design of van der Waals nanophotonic circuits for any operation wavelength from ultraviolet to infrared, emphasizing the significance of the potential impact of GeS2 on the field of nanophotonics.

physics.optics↗

arXiv2022

Anomalous optical response of graphene on hexagonal boron nitride substrates

Graphene/hBN heterostructures can be considered as one of the basic building blocks for the next-generation optoelectronics mostly owing to the record-high electron mobilities. However, currently, the studies of the intrinsic optical properties of graphene are limited to the standard substrates (SiO2/Si, glass, quartz) despite the growing interest in graphene/hBN heterostructures. This can be attributed to a challenging task of the determination of hBN's strongly anisotropic dielectric tensor in the total optical response. In this study, we overcome this issue through imaging spectroscopic ellipsometry utilizing simultaneous analysis of hBN's optical response with and without graphene monolayers. Our technique allowed us to retrieve the optical constants of graphene from graphene/hBN heterostructures in a broad spectral range of 250-950 nm. Our results suggest that graphene's absorption on hBN may exceed the one of graphene on SiO2/Si by about 60 %.

cond-mat.mes-hall↗

arXiv2021

Topological phase singularities in atomically thin high-refractive-index materials

Atomically thin transition metal dichalcogenides (TMDCs) present a promising platform for numerous photonic applications due to excitonic spectral features, possibility to tune their constants by external gating, doping, or light, and mechanical stability. Utilization of such materials for sensing or optical modulation purposes would require a clever optical design, as by itself the 2D materials can offer only a small optical phase delay - consequence of the atomic thickness. To address this issue, we combine films of 2D semiconductors which exhibit excitonic lines with the Fabry-Perot resonators of the standard commercial SiO$_2$/Si substrate, in order to realize topological phase singularities in reflection. Around these singularities, reflection spectra demonstrate rapid phase changes while the structure behaves as a perfect absorber. Furthermore, we demonstrate that such topological phase singularities are ubiquitous for the entire class of atomically thin TMDCs and other high-refractive-index materials, making it a powerful tool for phase engineering in flat optics. As a practical demonstration, we employ PdSe$_2$ topological phase singularities for a refractive index sensor and demonstrate its superior phase sensitivity compared to typical surface plasmon resonance sensors.

physics.optics↗