Searcharxiv⌕ Search

arXiv subjects

Valerie Connaughton

Publications and source records attributed to Valerie Connaughton.

46 records · Page 3Linked to original sources

Detection of a Thermal Spectral Component in the Prompt Emission of GRB 100724B

Observations of GRB 100724B with the Fermi Gamma-Ray Burst Monitor (GBM) find that the spectrum is dominated by the typical Band functional form, which is usually taken to represent a non-thermal emission component, but also includes a statistically highly significant thermal spectral contribution. The simultaneous observation of the thermal and non-thermal components allows us to confidently identify the two emission components. The fact that these seem to vary independently favors the idea that the thermal component is of photospheric origin while the dominant non-thermal emission occurs at larger radii. Our results imply either a very high efficiency for the non-thermal process, or a very small size of the region at the base of the flow, both quite challenging for the standard fireball model. These problems are resolved if the jet is initially highly magnetized and has a substantial Poynting flux.

astro-ph.HE↗

First Results from Fermi GBM Earth Occultation Monitoring: Observations of Soft Gamma-Ray Sources Above 100 keV

The NaI and BGO detectors on the Gamma-ray Burst Monitor (GBM) on Fermi are now being used for long-term monitoring of the hard X-ray/low energy gamma-ray sky. Using the Earth occultation technique as demonstrated previously by the BATSE instrument on the Compton Gamma-Ray Observatory, GBM can be used to produce multiband light curves and spectra for known sources and transient outbursts in the 8 keV to 1 MeV energy range with its NaI detectors and up to 40 MeV with its BGO detectors. Over 85% of the sky is viewed every orbit, and the precession of the Fermi orbit allows the entire sky to be viewed every ~26 days with sensitivity exceeding that of BATSE at energies below ~25 keV and above ~1.5 MeV. We briefly describe the technique and present preliminary results using the NaI detectors after the first two years of observations at energies above 100 keV. Eight sources are detected with a significance greater than 7 sigma: the Crab, Cyg X-1, SWIFT J1753.5-0127, 1E 1740-29, Cen A, GRS 1915+105, and the transient sources XTE J1752-223 and GX 339-4. Two of the sources, the Crab and Cyg X-1, have also been detected above 300 keV.

astro-ph.HE↗

Observations of Soft Gamma Ray Sources >100 keV Using Earth Occultation with GBM

The NaI and BGO detectors on the Gamma ray Burst Monitor (GBM) on Fermi are now being used for long term monitoring of the hard X-ray/low energy gamma ray sky. Using the Earth occultation technique demonstrated previously by the BATSE instrument on the Compton Gamma Ray Observatory, GBM produces multiband light curves and spectra for known sources and transient outbursts in the 8 keV - 1 MeV band with its NaI detectors and up to 40 MeV with its BGO. Coverage of the entire sky is obtained every two orbits, with sensitivity exceeding that of BATSE at energies below ~25 keV and above ~1.5 MeV. We describe the technique and present preliminary results after the first ~17 months of observations at energies above 100 keV. Seven sources are detected: the Crab, Cyg X-1, Swift J1753.5-0127, 1E 1740-29, Cen A, GRS 1915+105, and the transient source XTE J1752-223.

astro-ph.HE↗

Long-term Monitoring of Accreting Pulsars with Fermi GBM

Using the Gamma ray Burst Monitor (GBM) on Fermi we are monitoring accreting pulsar systems. We use the rates from GBM's 12 NaI detectors in the 8-50 keV range to detect and monitor pulsations with periods between 0.5 and 1000 seconds. After discussing our analysis approach we present results for individual sources from the first year of monitoring. Updated figures for these and other sources are available at http://gammaray.nsstc.nasa.gov/gbm/science/pulsars/ .

astro-ph.HE↗

The Fermi Gamma-Ray Burst Monitor

The Gamma-Ray Burst Monitor (GBM) will significantly augment the science return from the Fermi Observatory in the study of Gamma-Ray Bursts (GRBs). The primary objective of GBM is to extend the energy range over which bursts are observed downward from the energy range of the Large Area Telescope (LAT) on Fermi into the hard X-ray range where extensive previous data exist. A secondary objective is to compute burst locations on-board to allow re-orientiong the spacecraft so that the LAT can observe delayed emission from bright bursts. GBM uses an array of twelve sodium iodide scintillators and two bismuth germanate scintillators to detect gamma rays from ~8 keV to ~40 MeV over the full unocculted sky. The on-board trigger threshold is ~0.7 photons/cm2/s (50-300 keV, 1 s peak). GBM generates on-board triggers for ~250 GRBs per year.

astro-ph.IM↗

Ground-based calibration and characterization of the Fermi Gamma-Ray Burst Monitor Detectors

One of the scientific objectives of NASA's Fermi Gamma-ray Space Telescope is the study of Gamma-Ray Bursts (GRBs). The Fermi Gamma-Ray Burst Monitor (GBM) was designed to detect and localize bursts for the Fermi mission. By means of an array of 12 NaI(Tl) (8 keV to 1 MeV) and two BGO (0.2 to 40 MeV) scintillation detectors, GBM extends the energy range (20 MeV to > 300 GeV) of Fermi's main instrument, the Large Area Telescope, into the traditional range of current GRB databases. The physical detector response of the GBM instrument to GRBs is determined with the help of Monte Carlo simulations, which are supported and verified by on-ground individual detector calibration measurements. We present the principal instrument properties, which have been determined as a function of energy and angle, including the channel-energy relation, the energy resolution, the effective area and the spatial homogeneity.

astro-ph↗

Calibration of the GLAST Burst Monitor detectors

The GLAST Burst Monitor (GBM) will augment the capabilities of GLAST for the detection of cosmic gamma-ray bursts by extending the energy range (20 MeV to > 300 GeV) of the Large Area Telescope (LAT) towards lower energies by 2 BGO-detectors (150 keV to 30 MeV) and 12 NaI(Tl) detectors (10 keV to 1 MeV). The physical detector response of the GBM instrument for GRBs is determined with the help of Monte Carlo simulations, which are supported and verified by on-ground calibration measurements, performed extensively with the individual detectors at the MPE in 2005. All flight and spare detectors were irradiated with calibrated radioactive sources in the laboratory (from 14 keV to 4.43 MeV). The energy/channel-relations, the dependences of energy resolution and effective areas on the energy and the angular responses were measured. Due to the low number of emission lines of radioactive sources below 100 keV, calibration measurements in the energy range from 10 keV to 60 keV were performed with the X-ray radiometry working group of the Physikalisch-Technische Bundesanstalt (PTB) at the BESSY synchrotron radiation facility, Berlin.

astro-ph↗

The GLAST Burst Monitor

The next large NASA mission in the field of gamma-ray astronomy, GLAST, is scheduled for launch in 2007. Aside from the main instrument LAT (Large-Area Telescope), a gamma-ray telescope for the energy range between 20 MeV and > 100 GeV, a secondary instrument, the GLAST burst monitor (GBM), is foreseen. With this monitor one of the key scientific objectives of the mission, the determination of the high-energy behaviour of gamma-ray bursts and transients can be ensured. Its task is to increase the detection rate of gamma-ray bursts for the LAT and to extend the energy range to lower energies (from ~10 keV to \~30 MeV). It will provide real-time burst locations over a wide FoV with sufficient accuracy to allow repointing the GLAST spacecraft. Time-resolved spectra of many bursts recorded with LAT and the burst monitor will allow the investigation of the relation between the keV and the MeV-GeV emission from GRBs over unprecedented seven decades of energy. This will help to advance our understanding of the mechanisms by which gamma-rays are generated in gamma-ray bursts.

astro-ph↗

The Error Distribution of BATSE GRB Locations

Empirical probability models for BATSE GRB location errors are developed via a Bayesian analysis of the separations between BATSE GRB locations and locations obtained with the InterPlanetary Network (IPN). Models are compared and their parameters estimated using 392 GRBs with single IPN annuli and 19 GRBs with intersecting IPN annuli. Most of the analysis is for the 4Br BATSE catalog; earlier catalogs are also analyzed. The simplest model that provides a good representation of the error distribution has 78% of the probability in a `core' term with a systematic error of 1.85 degrees and the remainder in an extended tail with a systematic error of 5.1 degrees, implying a 68% confidence radius for bursts with negligible statistical uncertainties of 2.2 degrees. There is evidence for a more complicated model in which the error distribution depends on the BATSE datatype that was used to obtain the location. Bright bursts are typically located using the CONT datatype, and according to the more complicated model, the 68% confidence radius for CONT-located bursts with negligible statistical uncertainties is 2.0 degrees.

astro-ph↗

GRB Repetition Limits from Current BATSE Observations

Revised upper limits on gamma-ray burst repetition rates are found using the BATSE 3B and 4B catalogs. A statistical repetition model is assumed in which sources burst at a mean rate but in which BATSE observes bursts randomly from each source.

astro-ph↗