arXiv subjects

Vanessa Wirth

Publications and source records attributed to Vanessa Wirth.

9 recordsLinked to original sources

arXiv2025

MAROON: A Dataset for the Joint Characterization of Near-Field High-Resolution Radio-Frequency and Optical Depth Imaging Techniques

Utilizing the complementary strengths of wavelength-specific range or depth sensors is crucial for robust computer-assisted tasks such as autonomous driving. Despite this, there is still little research done at the intersection of optical depth sensors and radars operating close range, where the target is decimeters away from the sensors. Together with a growing interest in high-resolution imaging radars operating in the near field, the question arises how these sensors behave in comparison to their traditional optical counterparts. In this work, we take on the unique challenge of jointly characterizing depth imagers from both, the optical and radio-frequency domain using a multimodal spatial calibration. We collect data from four depth imagers, with three optical sensors of varying operation principle and an imaging radar. We provide a comprehensive evaluation of their depth measurements with respect to distinct object materials, geometries, and object-to-sensor distances. Specifically, we reveal scattering effects of partially transmissive materials and investigate the response of radio-frequency signals. All object measurements will be made public in form of a multimodal dataset, called MAROON.

eess.IV↗

arXiv2025

MM-2FSK: Multimodal Frequency Shift Keying for Ultra-Efficient and Robust High-Resolution MIMO Radar Imaging

Accurate reconstruction of static and rapidly moving targets demands three-dimensional imaging solutions with high temporal and spatial resolution. Radar sensors are a promising sensing modality because of their fast capture rates and their independence from lighting conditions. To achieve high spatial resolution, MIMO radars with large apertures are required. Yet, they are infrequently used for dynamic scenarios due to significant limitations in signal processing algorithms. These limitations impose substantial hardware constraints due to their computational intensity and reliance on large signal bandwidths, ultimately restricting the sensor's capture rate. One solution of previous work is to use few frequencies only, which enables faster capture and requires less computation; however, this requires coarse knowledge of the target's position and works in a limited depth range only. To address these challenges, we extend previous work into the multimodal domain with MM-2FSK, which leverages an assistive optical depth sensing modality to obtain a depth prior, enabling high framerate capture with only few frequencies. We evaluate our method using various target objects with known ground truth geometry that is spatially registered to real millimeter-wave MIMO radar measurements. Our method demonstrates superior performance in terms of depth quality, being able to compete with the time- and resource-intensive measurements with many frequencies.

eess.SP↗

arXiv2025

3D Face Reconstruction From Radar Images

The 3D reconstruction of faces gains wide attention in computer vision and is used in many fields of application, for example, animation, virtual reality, and even forensics. This work is motivated by monitoring patients in sleep laboratories. Due to their unique characteristics, sensors from the radar domain have advantages compared to optical sensors, namely penetration of electrically non-conductive materials and independence of light. These advantages of radar signals unlock new applications and require adaptation of 3D reconstruction frameworks. We propose a novel model-based method for 3D reconstruction from radar images. We generate a dataset of synthetic radar images with a physics-based but non-differentiable radar renderer. This dataset is used to train a CNN-based encoder to estimate the parameters of a 3D morphable face model. Whilst the encoder alone already leads to strong reconstructions of synthetic data, we extend our reconstruction in an Analysis-by-Synthesis fashion to a model-based autoencoder. This is enabled by learning the rendering process in the decoder, which acts as an object-specific differentiable radar renderer. Subsequently, the combination of both network parts is trained to minimize both, the loss of the parameters and the loss of the resulting reconstructed radar image. This leads to the additional benefit, that at test time the parameters can be further optimized by finetuning the autoencoder unsupervised on the image loss. We evaluated our framework on generated synthetic face images as well as on real radar images with 3D ground truth of four individuals.

cs.CV↗

arXiv2024

Automatic Spatial Calibration of Near-Field MIMO Radar With Respect to Optical Depth Sensors

Despite an emerging interest in MIMO radar, the utilization of its complementary strengths in combination with optical depth sensors has so far been limited to far-field applications, due to the challenges that arise from mutual sensor calibration in the near field. In fact, most related approaches in the autonomous industry propose target-based calibration methods using corner reflectors that have proven to be unsuitable for the near field. In contrast, we propose a novel, joint calibration approach for optical RGB-D sensors and MIMO radars that is designed to operate in the radar's near-field range, within decimeters from the sensors. Our pipeline consists of a bespoke calibration target, allowing for automatic target detection and localization, followed by the spatial calibration of the two sensor coordinate systems through target registration. We validate our approach using two different depth sensing technologies from the optical domain. The experiments show the efficiency and accuracy of our calibration for various target displacements, as well as its robustness of our localization in terms of signal ambiguities.

cs.RO↗

arXiv2024

An Efficient yet High-Performance Method for Precise Radar-Based Imaging of Human Hand Poses

Contactless hand pose estimation requires sensors that provide precise spatial information and low computational complexity for real-time processing. Unlike vision-based systems, radar offers lighting independence and direct motion assessments. Yet, there is limited research balancing real-time constraints, suitable frame rates for motion evaluations, and the need for precise 3D data. To address this, we extend the ultra-efficient two-tone hand imaging method from our prior work to a three-tone approach. Maintaining high frame rates and real-time constraints, this approach significantly enhances reconstruction accuracy and precision. We assess these measures by evaluating reconstruction results for different hand poses obtained by an imaging radar. Accuracy is assessed against ground truth from a spatially calibrated photogrammetry setup, while precision is measured using 3D-printed hand poses. The results emphasize the method's great potential for future radar-based hand sensing.

eess.SP↗

arXiv2023

ShaRPy: Shape Reconstruction and Hand Pose Estimation from RGB-D with Uncertainty

Despite their potential, markerless hand tracking technologies are not yet applied in practice to the diagnosis or monitoring of the activity in inflammatory musculoskeletal diseases. One reason is that the focus of most methods lies in the reconstruction of coarse, plausible poses, whereas in the clinical context, accurate, interpretable, and reliable results are required. Therefore, we propose ShaRPy, the first RGB-D Shape Reconstruction and hand Pose tracking system, which provides uncertainty estimates of the computed pose, e.g., when a finger is hidden or its estimate is inconsistent with the observations in the input, to guide clinical decision-making. Besides pose, ShaRPy approximates a personalized hand shape, promoting a more realistic and intuitive understanding of its digital twin. Our method requires only a light-weight setup with a single consumer-level RGB-D camera yet it is able to distinguish similar poses with only small joint angle deviations in a metrically accurate space. This is achieved by combining a data-driven dense correspondence predictor with traditional energy minimization. To bridge the gap between interactive visualization and biomedical simulation we leverage a parametric hand model in which we incorporate biomedical constraints and optimize for both, its pose and hand shape. We evaluate ShaRPy on a keypoint detection benchmark and show qualitative results of hand function assessments for activity monitoring of musculoskeletal diseases.

cs.CV↗

arXiv2023

A Realistic Radar Ray Tracing Simulator for Hand Pose Imaging

With the increasing popularity of human-computer interaction applications, there is also growing interest in generating sufficiently large and diverse data sets for automatic radar-based recognition of hand poses and gestures. Radar simulations are a vital approach to generating training data (e.g., for machine learning). Therefore, this work applies a ray tracing method to radar imaging of the hand. The performance of the proposed simulation approach is verified by a comparison of simulation and measurement data based on an imaging radar with a high lateral resolution. In addition, the surface material model incorporated into the ray tracer is highlighted in more detail and parameterized for radar hand imaging. Measurements and simulations show a very high similarity between synthetic and real radar image captures. The presented results demonstrate that it is possible to generate very realistic simulations of radar measurement data even for complex radar hand pose imaging systems.

eess.SP↗

arXiv2023

Achieving Efficient and Realistic Full-Radar Simulations and Automatic Data Annotation by exploiting Ray Meta Data of a Radar Ray Tracing Simulator

In this work a novel radar simulation concept is introduced that allows to simulate realistic radar data for Range, Doppler, and for arbitrary antenna positions in an efficient way. Further, it makes it possible to automatically annotate the simulated radar signal by allowing to decompose it into different parts. This approach allows not only almost perfect annotations possible, but also allows the annotation of exotic effects, such as multi-path effects or to label signal parts originating from different parts of an object. This is possible by adapting the computation process of a Monte Carlo shooting and bouncing rays (SBR) simulator. By considering the hits of each simulated ray, various meta data can be stored such as hit position, mesh pointer, object IDs, and many more. This collected meta data can then be utilized to predict the change of path lengths introduced by object motion to obtain Doppler information or to apply specific ray filter rules in order obtain radar signals that only fulfil specific conditions, such as multiple bounces or containing specific object IDs. Using this approach, perfect and otherwise almost impossible annotations schemes can be realized.

eess.SP↗

arXiv2023

Author-Unification: Name-, Institution-, and Career-Sharing Co-authors

In this work, we investigate the phenomenon of Author-UnificAtion (AUA), which describes the high structural similarity of two co-authoring engineers that share the same forename, surname, institution, and academic career without being related by blood. So far, prior work has only explored similar surnames and institutions. On top of that, we elaborate on the additional author similarity of sharing the same academic career as a Ph.D. candidate with the same starting day and month included in the university contract. We show that our work outperforms previous state-of-the-art investigations, among others by providing a higher Structural Similarity Index Measure (SSIM) of the letters in our names and in our institution. Lastly, we prove the duality of our identities through a qualitative evaluation.

cs.DL↗