arXiv subjects

Vania Da Deppo

Publications and source records attributed to Vania Da Deppo.

14 recordsLinked to original sources

arXiv2025

A 1.8 m class pathfinder Raman LIDAR for the Northern Site of the Cherenkov Telescope Array Observatory -- Technical Design

This paper presents the technical design of the pathfinder Barcelona Raman LIDAR (pBRL) for the northern site of the Cherenkov Telescope Array Observatory (CTAO-N) located at the Roque de los Muchachos Observatory (ORM). The pBRL is developed for continuous atmospheric characterization, essential for correcting high-energy gamma-ray observations captured by Imaging Atmospheric Cherenkov Telescopes (IACTs). The LIDAR consists of a steerable telescope with a 1.8 m parabolic mirror and a pulsed Nd:YAG laser with frequency doubling and tripling. It emits at wavelengths of 355 nm and 532 nm to measure aerosol scattering and extinction through two elastic and Raman channels. Built upon a former Cherenkov Light Ultraviolet Experiment (CLUE) telescope, the pBRL's design includes a Newtonian mirror configuration, a coaxial laser beam, a near-range system, a liquid light guide and a custom-made polychromator. During a one-year test at the ORM, the stability of the LIDAR and semi-remote-controlled operations were tested. This pathfinder leads the way to designing a final version of a CTAO Raman LIDAR which will provide real-time atmospheric monitoring and, as such, ensure the necessary accuracy of scientific data collected by the CTAO-N telescope array.

astro-ph.IM↗

arXiv2025

Preparing for the 2061 return of Halley's comet -- A rendezvous mission with an innovative imaging system

The return of Comet 1P/Halley will promote a wide interest for ground and space observations of a celestial body of outstanding scientific and cultural interest. In addition to remote observations, space will open the possibility of in situ science similarly to the passage of 1986. In this paper, we first discuss the scientific motivations for a rendezvous mission, capable to overcome the limitations of the flyby missions that took place at that time. In the second part, we describe an example of a rendezvous trajectory that can be carried out with existing power and propulsion technologies. The transfer is made possible by the gravitational assistance of a giant planet. The resulting mission will be capable to reach the comet beyond the distance of Saturn, when the sublimation of super-volatile species will be ongoing, and well before the onset of the sublimation of water (4 AU). After rendezvous, the spacecraft will accompany the comet for several years before, around and after perihelion (July 2061). Our concept mission does not foresee the implementation of solar panels. In this way, operations can occur even inside the dense dust coma at short distance from the nucleus. In the third part of the paper, an innovative imaging system is proposed, with a very large field of view (100{\deg}) capable to record on the same frame details on the surface and the surrounding space, in order to follow for several degrees the trajectories of chunks and clouds ejected by pits or fractures, crucial to the understanding of the cometary activity. A concerted effort is needed in the current decade to plan and approve a rendezvous mission to 1P. Indeed, the scenario here described requires launching before 2040, less than 15 years from now. Later launches imply a severe loss of scientific knowledge, because the spacecraft will not be able to reach the comet before the onset of water sublimation.

astro-ph.EP↗

arXiv2023

Particle monitoring capability of the Solar Orbiter Metis coronagraph through the increasing phase of solar cycle 25

Context. Galactic cosmic rays (GCRs) and solar particles with energies greater than tens of MeV penetrate spacecraft and instruments hosted aboard space missions. The Solar Orbiter Metis coronagraph is aimed at observing the solar corona in both visible (VL) and ultraviolet (UV) light. Particle tracks are observed in the Metis images of the corona. An algorithm has been implemented in the Metis processing electronics to detect the VL image pixels crossed by cosmic rays. This algorithm was initially enabled for the VL instrument only, since the process of separating the particle tracks in the UV images has proven to be very challenging. Aims. We study the impact of the overall bulk of particles of galactic and solar origin on the Metis coronagraph images. We discuss the effects of the increasing solar activity after the Solar Orbiter mission launch on the secondary particle production in the spacecraft. Methods. We compared Monte Carlo simulations of GCRs crossing or interacting in the Metis VL CMOS sensor to observations gathered in 2020 and 2022. We also evaluated the impact of solar energetic particle events of different intensities on the Metis images. Results. The study of the role of abundant and rare cosmic rays in firing pixels in the Metis VL images of the corona allows us to estimate the efficiency of the algorithm applied for cosmic-ray track removal from the images and to demonstrate that the instrument performance had remained unchanged during the first two years of the Solar Orbiter operations. The outcome of this work can be used to estimate the Solar Orbiter instrument's deep charging and the order of magnitude for energetic particles crossing the images of Metis and other instruments such as STIX and EUI.

astro-ph.SR↗

arXiv2023

Coronal Heating Rate in the Slow Solar Wind

This Letter reports the first observational estimate of the heating rate in the slowly expanding solar corona. The analysis exploits the simultaneous remote and local observations of the same coronal plasma volume with the Solar Orbiter/Metis and the Parker Solar Probe instruments, respectively, and relies on the basic solar wind magnetohydrodynamic equations. As expected, energy losses are a minor fraction of the solar wind energy flux, since most of the energy dissipation that feeds the heating and acceleration of the coronal flow occurs much closer to the Sun than the heights probed in the present study, which range from 6.3 to 13.3 solar radii. The energy deposited to the supersonic wind is then used to explain the observed slight residual wind acceleration and to maintain the plasma in a non-adiabatic state. As derived in the Wentzel-Kramers-Brillouin limit, the present energy transfer rate estimates provide a lower limit, which can be very useful in refining the turbulence-based modeling of coronal heating and subsequent solar wind acceleration.

astro-ph.SR↗

arXiv2023

Does Turbulence along the Coronal Current Sheet Drive Ion Cyclotron Waves?

Evidence for the presence of ion cyclotron waves, driven by turbulence, at the boundaries of the current sheet is reported in this paper. By exploiting the full potential of the joint observations performed by Parker Solar Probe and the Metis coronagraph on board Solar Orbiter, local measurements of the solar wind can be linked with the large-scale structures of the solar corona. The results suggest that the dynamics of the current sheet layers generates turbulence, which in turn creates a sufficiently strong temperature anisotropy to make the solar-wind plasma unstable to anisotropy-driven instabilities such as the Alfvén ion-cyclotron, mirror-mode, and firehose instabilities. The study of the polarization state of high-frequency magnetic fluctuations reveals that ion cyclotron waves are indeed present along the current sheet, thus linking the magnetic topology of the remotely imaged coronal source regions with the wave bursts observed in situ. The present results may allow improvement of state-of-the-art models based on the ion cyclotron mechanism, providing new insights into the processes involved in coronal heating.

astro-ph.SR↗

arXiv2022

Connecting Solar Orbiter remote-sensing observations and Parker Solar Probe in-situ measurements with a numerical MHD reconstruction of the Parker spiral

As a key feature, NASA's Parker Solar Probe (PSP) and ESA-NASA's Solar Orbiter (SO) missions cooperate to trace solar wind and transients from their sources on the Sun to the inner interplanetary space. The goal of this work is to accurately reconstruct the interplanetary Parker spiral and the connection between coronal features observed remotely by the Metis coronagraph on-board SO and those detected in situ by PSP at the time of the first PSP-SO quadrature of January 2021. We use the Reverse In-situ and MHD Approach (RIMAP), a hybrid analytical-numerical method performing data-driven reconstructions of the Parker spiral. RIMAP solves the MHD equations on the equatorial plane with the PLUTO code, using the measurements collected by PSP between 0.1 and 0.2 AU as boundary conditions. Our reconstruction connects density and wind speed measurements provided by Metis (3-6 solar radii) to those acquired by PSP (21.5 solar radii) along a single streamline. The capability of our MHD model to connect the inner corona observed by Metis and the super Alfvénic wind measured by PSP, not only confirms the research pathways provided by multi-spacecraft observations, but also the validity and accuracy of RIMAP reconstructions as a possible test bench to verify models of transient phenomena propagating across the heliosphere, such as coronal mass ejections, solar energetic particles and solar wind switchbacks.

astro-ph.SR↗

arXiv2022

CO2-driven surface changes in the Hapi region on Comet 67P/Churyumov-Gerasimenko

Between 2014 December 31 and 2015 March 17, the OSIRIS cameras on Rosetta documented the growth of a 140m wide and 0.5m deep depression in the Hapi region on Comet 67P/Churyumov-Gerasimenko. This shallow pit is one of several that later formed elsewhere on the comet, all in smooth terrain that primarily is the result of airfall of coma particles. We have compiled observations of this region in Hapi by the microwave instrument MIRO on Rosetta, acquired during October and November 2014. We use thermophysical and radiative transfer models in order to reproduce the MIRO observations. This allows us to place constraints on the thermal inertia, diffusivity, chemical composition, stratification, extinction coefficients, and scattering properties of the surface material, and how they evolved during the months prior to pit formation. The results are placed in context through long-term comet nucleus evolution modelling. We propose that: 1) MIRO observes signatures that are consistent with a solid-state greenhouse effect in airfall material; 2) CO2 ice is sufficiently close to the surface to have a measurable effect on MIRO antenna temperatures, and likely is responsible for the pit formation in Hapi observed by OSIRIS; 3) the pressure at the CO2 sublimation front is sufficiently strong to expel dust and water ice outwards, and to compress comet material inwards, thereby causing the near-surface compaction observed by CONSERT, SESAME, and groundbased radar, manifested as the "consolidated terrain" texture observed by OSIRIS.

astro-ph.EP↗

arXiv2022

In-flight radiometric calibration of the ExoMars TGO Colour and Stereo Surface Imaging System

The Colour and Stereo Surface Science Imaging System (CaSSIS) of the ExoMars Trace Gas Orbiter returns on average twenty images per day of the Martian surface, most of them in 3 or 4 colours and some of them in stereo. CaSSIS uses a push-frame approach to acquire colour images, with four bandpass filters deposited directly above the sensor and an imaging cadence synchronized with the ground track velocity to cover the imaged area with tens of small, partially overlapping images. These "framelets" are later map-projected and mosaicked to build the final image. This approach offers both advantages and challenges in terms of radiometric calibration. While the collection of dark and flatfield frames is considerably enhanced by the frequent and fast acquisition of tens of successive images, mosaics assembled from the adjacent framelets highlight the straylight and changes in the bias of the detector. Both issues have been identified on CaSSIS images, with low intensities overall (up to a few percents), but sufficient to generate prominent artefacts on the final assembled colour images. We have therefore developed methods to correct these artefacts that are now included into the radiometric calibration pipeline. We detail here the different steps of the calibration procedure and the generation of the products used for calibration, and discuss the efficacy of the corrections. The relative uncertainties on the bias and flatfield frames are low, of the order of 0.2 and 0.1 percents, respectively. The uncertainty on the absolute radiometric calibration is of 3 percents, which is quite low for such an instrument. The straylight adds an estimated about 1 percent error to the absolute calibration. The residuals after corrections of the straylight and bias offsets are of the order of a few DNs to tens of DNs.

astro-ph.EP↗

arXiv2022

Observation of Magnetic Switchback in the Solar Corona

Switchbacks are sudden, large radial deflections of the solar wind magnetic field, widely revealed in interplanetary space by the Parker Solar Probe. The switchbacks' formation mechanism and sources are still unresolved, although candidate mechanisms include Alfvénic turbulence, shear-driven Kelvin-Helmholtz instabilities, interchange reconnection, and geometrical effects related to the Parker spiral. This Letter presents observations from the Metis coronagraph onboard Solar Orbiter of a single large propagating S-shaped vortex, interpreted as first evidence of a switchback in the solar corona. It originated above an active region with the related loop system bounded by open-field regions to the East and West. Observations, modeling, and theory provide strong arguments in favor of the interchange reconnection origin of switchbacks. Metis measurements suggest that the initiation of the switchback may also be an indicator of the origin of slow solar wind.

astro-ph.SR↗

arXiv2021

Exploring the Solar Wind from its Source on the Corona into the Inner Heliosphere during the First Solar Orbiter - Parker Solar Probe Quadrature

This Letter addresses the first Solar Orbiter (SO) -- Parker Solar Probe (PSP) quadrature, occurring on January 18, 2021, to investigate the evolution of solar wind from the extended corona to the inner heliosphere. Assuming ballistic propagation, the same plasma volume observed remotely in corona at altitudes between 3.5 and 6.3 solar radii above the solar limb with the Metis coronagraph on SO can be tracked to PSP, orbiting at 0.1 au, thus allowing the local properties of the solar wind to be linked to the coronal source region from where it originated. Thanks to the close approach of PSP to the Sun and the simultaneous Metis observation of the solar corona, the flow-aligned magnetic field and the bulk kinetic energy flux density can be empirically inferred along the coronal current sheet with an unprecedented accuracy, allowing in particular estimation of the Alfvén radius at 8.7 solar radii during the time of this event. This is thus the very first study of the same solar wind plasma as it expands from the sub-Alfvénic solar corona to just above the Alfvén surface.

astro-ph.SR↗

arXiv2019

Metis: the Solar Orbiter visible light and ultraviolet coronal imager

Metis is the first solar coronagraph designed for a space mission capable of performing simultaneous imaging of the off-limb solar corona in both visible and UV light. The observations obtained with Metis aboard the Solar Orbiter ESA-NASA observatory will enable us to diagnose, with unprecedented temporal coverage and spatial resolution, the structures and dynamics of the full corona from 1.7 $R_\odot$ to about 9 $R_\odot$. Due to the uniqueness of the Solar Orbiter mission profile, Metis will be able to observe the solar corona from a close vantage point (down to 0.28 AU), achieving out-of-ecliptic views with the increase of the orbit inclination over time. Moreover, observations near perihelion, during the phase of lower rotational velocity of the solar surface relative to the spacecraft, will allow longer-term studies of the coronal features. Thanks to a novel occultation design and a combination of a UV interference coating of the mirrors and a spectral bandpass filter, Metis images the solar corona simultaneously in the visible light band, between 580 and 640 nm, and in the UV H I Lyman-α line at 121.6 nm. The coronal images in both the UV Lyman-α and polarised visible light are obtained at high spatial resolution with a spatial scale down to about 2000 km and 15000 km at perihelion, in the cases of the visible and UV light, respectively. A temporal resolution down to 1 second can be achieved when observing coronal fluctuations in visible light. The Metis measurements will allow for complete characterisation of the main physical parameters and dynamics of the electron and neutral hydrogen/proton plasma components of the corona in the region where the solar wind undergoes acceleration and where the onset and initial propagation of coronal mass ejections take place, thus significantly improving our understanding of the region connecting the Sun to the heliosphere.

astro-ph.SR↗

arXiv2019

Raman LIDARs for the atmospheric calibration along the line-of-sight of CTA

The Cherenkov Telescope Array (CTA) is the next generation ground based observatory for gamma ray astronomy at very high energies. Employing more than 100 Imaging Atmospheric Cherenkov Telescopes in the northern and southern hemispheres, it was designed to reach unprecedented sensitivity and energy resolution. Understanding and correcting for systematic biases on the absolute energy scale and instrument response functions will be a crucial issue for the performance of CTA. The LUPM group and the Spanish/Italian/Slovenian collaboration are currently building two Raman LIDAR prototypes for the online atmospheric calibration along the line of sight of the CTA. Requirements for such a solution include the ability to characterize aerosol extinction at two wavelengths to distances of 30 km with an accuracy better than 5%, within time scales of about a minute, steering capabilities and close interaction with the CTA array control and data acquisition system as well as other auxiliary instruments. Our Raman LIDARs have design features that make them different from those used in atmospheric science and are characterized by large collecting mirrors (2.5 m2), liquid light guides that collect the light at the focal plane and transport it to the readout system, reduced acquisition time and highly precise Raman spectrometers. The Raman LIDARs will participate in a cross calibration and characterization campaign of the atmosphere at the CTA North site at La Palma, together with other site characterization instruments. After a one year test period there, an in depth evaluation of the solutions adopted by the two projects will lead to a final Raman LIDAR design proposal for both CTA sites.

astro-ph.IM↗

arXiv2018

Models of Rosetta/OSIRIS 67P dust coma phase function

The phase function of the dust coma of comet 67P has been determined from Rosetta/OSIRIS images \citep{Bertini17}. This function show a deep minimum at phase angles near 100$^\circ$, and a strong backscattering enhancement. These two properties cannot be reproduced by regular models of cometary dust, most of them based on wavelength-sized and randomly-oriented aggregate particles. We show, however, that an ensamble of oriented elongated particles of a wide variety of aspect ratios, with radii $r \gtrsim$10 $μ$m, and whose long axes are perpendicular to the direction of the solar radiation, are capable of reproducing the observed phase function. These particles must be absorbing, with an imaginary part of the refractive index of about 0.1 to match the expected geometric albedo, and with porosity in the 60-70\% range.

astro-ph.EP↗

arXiv2009

Feasibility of satellite quantum key distribution

In this paper we present a novel analysis of the feasibility of quantum key distribution between a LEO satellite and a ground station. First of all, we study signal propagation through a turbulent atmosphere for uplinks and downlinks, discussing the contribution of beam spreading and beam wandering. Then we introduce a model for the background noise of the channel during night-time and day-time, calculating the signal-to-noise ratio for different configurations. We also discuss the expected error-rate due to imperfect polarization-compensation in the channel. Finally, we calculate the expected key generation rate of a secure key for different configurations (uplink, downlink) and for different protocols (BB84 with and without decoy states, entanglement-based Ekert91 protocol).

quant-ph↗