SearcharxivSearch

arXiv subjects

Varun A Baheti

Publications and source records attributed to Varun A Baheti.

2 recordsLinked to original sources

Diffusion-controlled growth of phases in metal-tin systems related to microelectronics packaging

The electro–mechanical connection between under bump metallization (UBM) and solder in flip–chip bonding is achieved by the formation of brittle intermetallic compounds (IMCs) during the soldering process. These IMCs continue to grow in the solid–state during storage at room temperature and service at an elevated temperature leading to degradation of the contacts. In this thesis, the diffusion–controlled growth mechanism of the phases and the formation of the Kirkendall voids at the interface of UBM (Cu, Ni, Au, Pd, Pt) and Sn (bulk/electroplated) are studied extensively.

physics.app-ph

Bifurcation of the Kirkendall marker plane and the role of Ni and other impurities on the growth of Kirkendall voids in the Cu Sn system

The presence of bifurcation of the Kirkendall marker plane, a very special phenomenon discovered recently, is found in a technologically important Cu Sn system. It was predicted based on estimated diffusion coefficients; however, could not be detected following the conventional inert marker experiments. As reported in this study, we could detect the locations of these planes based on the microstructural features examined in SEM and TEM. This strengthens the concept of the physicochemical approach that relates microstructural evolution with the diffusion rates of components and imparts finer understanding of the growth mechanism of phases. The estimated diffusion coefficients at the Kirkendall marker planes indicates that the reason for the growth of the Kirkendall voids is the nonconsumption of excess vacancies which are generated due to unequal diffusion rate of components. Systematic experiments using different purity of Cu in this study indicates the importance of the presence of impurities on the growth of voids, which increases drastically for greather than 0.1 wt percent impurity. The growth of voids increases drastically for electroplated Cu, commercially pure Cu and Cu(0.5 at percent Ni) indicating the adverse role of both inorganic and organic impurities. Void size and number distribution analysis indicates the nucleation of new voids along with the growth of existing voids with the increase in annealing time. The newly found location of the Kirkendall marker plane in the Cu3Sn phase indicates that voids grow on both the sides of this plane which was not considered earlier for developing theoretical models.

cond-mat.mtrl-sci