SearcharxivSearch

arXiv subjects

Varun Kumar

Publications and source records attributed to Varun Kumar.

47 records · Page 3Linked to original sources

Data Pipeline Architecture and Development for VELC onboard Space Solar Mission AdityaL1

ADITYA L-1 is India's first dedicated mission to study Sun and its atmosphere with Visible Emission Line Coronagraph (VELC), a major payload on ADITYA-L1. VELC has provision to make imaging and spectroscopic observations of the corona, simultaneously. Imaging with the Field of View (FOV) from 1.05Ro to 3Ro will be done in continuum at 500nm. The spectroscopic observations of solar corona in three emission lines, namely 5303 Å [Fe XIV], 7892 Å [Fe XI], 10747 Å [Fe XIII], and Spectro-polarimetry at 10747 Å [Fe XIII] will be performed with FOV of 1.05-1.5Ro. In this work, the end-to-end data pipeline architecture and development of the VELC payload are presented. The VELC proposal submission form, satellite observation parameters, data products, level definitions, data pipeline and analysis software to process the big raw data sets obtained using VELC instruments onboard satellite to science-ready data are discussed.

astro-ph.IM

Spectropolarimeter on-board the Aditya-L1: Polarization Modulation and Demodulation

One of the major science goals of the Visible Emission Line Coronagraph (VELC) payload aboard the Aditya-L1 mission is to map the coronal magnetic field topology and the quantitative estimation of longitudinal magnetic field on routine basis. The infrared (IR) channel of VELC is equipped with a polarimeter to carry out full Stokes spectropolarimetric observations in the Fe XIII line at 1074.7~nm. The polarimeter is in dual-beam setup with continuously rotating waveplate as the polarization modulator. Detection of circular polarization due to Zeeman effect and depolarization of linear polarization in the presence of magnetic field due to saturated Hanle effect in the Fe~{\sc xiii} line require high signal-to-noise ratio (SNR). Due to limited number of photons, long integration times are expected to build the required SNR. In other words signal from a large number of modulation cycles are to be averaged to achieve the required SNR. This poses several difficulties. One of them is the increase in data volume and the other one is the change in modulation matrix in successive modulation cycles. The latter effect arises due to a mismatch between the retarder's rotation period and the length of the signal detection time in the case of VELC spectropolarimeter (VELC/SP). It is shown in this paper that by appropriately choosing the number of samples per half rotation the data volume can be optimized. A potential solution is suggested to account for modulation matrix variation from one cycle to the other.

astro-ph.IM

Industry Scale Semi-Supervised Learning for Natural Language Understanding

This paper presents a production Semi-Supervised Learning (SSL) pipeline based on the student-teacher framework, which leverages millions of unlabeled examples to improve Natural Language Understanding (NLU) tasks. We investigate two questions related to the use of unlabeled data in production SSL context: 1) how to select samples from a huge unlabeled data pool that are beneficial for SSL training, and 2) how do the selected data affect the performance of different state-of-the-art SSL techniques. We compare four widely used SSL techniques, Pseudo-Label (PL), Knowledge Distillation (KD), Virtual Adversarial Training (VAT) and Cross-View Training (CVT) in conjunction with two data selection methods including committee-based selection and submodular optimization based selection. We further examine the benefits and drawbacks of these techniques when applied to intent classification (IC) and named entity recognition (NER) tasks, and provide guidelines specifying when each of these methods might be beneficial to improve large scale NLU systems.

cs.CL

Data Augmentation using Pre-trained Transformer Models

Language model based pre-trained models such as BERT have provided significant gains across different NLP tasks. In this paper, we study different types of transformer based pre-trained models such as auto-regressive models (GPT-2), auto-encoder models (BERT), and seq2seq models (BART) for conditional data augmentation. We show that prepending the class labels to text sequences provides a simple yet effective way to condition the pre-trained models for data augmentation. Additionally, on three classification benchmarks, pre-trained Seq2Seq model outperforms other data augmentation methods in a low-resource setting. Further, we explore how different pre-trained model based data augmentation differs in-terms of data diversity, and how well such methods preserve the class-label information.

cs.CL

ProtoDA: Efficient Transfer Learning for Few-Shot Intent Classification

Practical sequence classification tasks in natural language processing often suffer from low training data availability for target classes. Recent works towards mitigating this problem have focused on transfer learning using embeddings pre-trained on often unrelated tasks, for instance, language modeling. We adopt an alternative approach by transfer learning on an ensemble of related tasks using prototypical networks under the meta-learning paradigm. Using intent classification as a case study, we demonstrate that increasing variability in training tasks can significantly improve classification performance. Further, we apply data augmentation in conjunction with meta-learning to reduce sampling bias. We make use of a conditional generator for data augmentation that is trained directly using the meta-learning objective and simultaneously with prototypical networks, hence ensuring that data augmentation is customized to the task. We explore augmentation in the sentence embedding space as well as prototypical embedding space. Combining meta-learning with augmentation provides upto 6.49% and 8.53% relative F1-score improvements over the best performing systems in the 5-shot and 10-shot learning, respectively.

cs.CL

BOLD: Dataset and Metrics for Measuring Biases in Open-Ended Language Generation

Recent advances in deep learning techniques have enabled machines to generate cohesive open-ended text when prompted with a sequence of words as context. While these models now empower many downstream applications from conversation bots to automatic storytelling, they have been shown to generate texts that exhibit social biases. To systematically study and benchmark social biases in open-ended language generation, we introduce the Bias in Open-Ended Language Generation Dataset (BOLD), a large-scale dataset that consists of 23,679 English text generation prompts for bias benchmarking across five domains: profession, gender, race, religion, and political ideology. We also propose new automated metrics for toxicity, psycholinguistic norms, and text gender polarity to measure social biases in open-ended text generation from multiple angles. An examination of text generated from three popular language models reveals that the majority of these models exhibit a larger social bias than human-written Wikipedia text across all domains. With these results we highlight the need to benchmark biases in open-ended language generation and caution users of language generation models on downstream tasks to be cognizant of these embedded prejudices.

cs.CL

A Closer Look At Feature Space Data Augmentation For Few-Shot Intent Classification

New conversation topics and functionalities are constantly being added to conversational AI agents like Amazon Alexa and Apple Siri. As data collection and annotation is not scalable and is often costly, only a handful of examples for the new functionalities are available, which results in poor generalization performance. We formulate it as a Few-Shot Integration (FSI) problem where a few examples are used to introduce a new intent. In this paper, we study six feature space data augmentation methods to improve classification performance in FSI setting in combination with both supervised and unsupervised representation learning methods such as BERT. Through realistic experiments on two public conversational datasets, SNIPS, and the Facebook Dialog corpus, we show that data augmentation in feature space provides an effective way to improve intent classification performance in few-shot setting beyond traditional transfer learning approaches. In particular, we show that (a) upsampling in latent space is a competitive baseline for feature space augmentation (b) adding the difference between two examples to a new example is a simple yet effective data augmentation method.

cs.CL

Efficient Semi-Supervised Learning for Natural Language Understanding by Optimizing Diversity

Expanding new functionalities efficiently is an ongoing challenge for single-turn task-oriented dialogue systems. In this work, we explore functionality-specific semi-supervised learning via self-training. We consider methods that augment training data automatically from unlabeled data sets in a functionality-targeted manner. In addition, we examine multiple techniques for efficient selection of augmented utterances to reduce training time and increase diversity. First, we consider paraphrase detection methods that attempt to find utterance variants of labeled training data with good coverage. Second, we explore sub-modular optimization based on n-grams features for utterance selection. Experiments show that functionality-specific self-training is very effective for improving system performance. In addition, methods optimizing diversity can reduce training data in many cases to 50% with little impact on performance.

cs.CL

SpaceNet MVOI: a Multi-View Overhead Imagery Dataset

Detection and segmentation of objects in overheard imagery is a challenging task. The variable density, random orientation, small size, and instance-to-instance heterogeneity of objects in overhead imagery calls for approaches distinct from existing models designed for natural scene datasets. Though new overhead imagery datasets are being developed, they almost universally comprise a single view taken from directly overhead ("at nadir"), failing to address a critical variable: look angle. By contrast, views vary in real-world overhead imagery, particularly in dynamic scenarios such as natural disasters where first looks are often over 40 degrees off-nadir. This represents an important challenge to computer vision methods, as changing view angle adds distortions, alters resolution, and changes lighting. At present, the impact of these perturbations for algorithmic detection and segmentation of objects is untested. To address this problem, we present an open source Multi-View Overhead Imagery dataset, termed SpaceNet MVOI, with 27 unique looks from a broad range of viewing angles (-32.5 degrees to 54.0 degrees). Each of these images cover the same 665 square km geographic extent and are annotated with 126,747 building footprint labels, enabling direct assessment of the impact of viewpoint perturbation on model performance. We benchmark multiple leading segmentation and object detection models on: (1) building detection, (2) generalization to unseen viewing angles and resolutions, and (3) sensitivity of building footprint extraction to changes in resolution. We find that state of the art segmentation and object detection models struggle to identify buildings in off-nadir imagery and generalize poorly to unseen views, presenting an important benchmark to explore the broadly relevant challenge of detecting small, heterogeneous target objects in visually dynamic contexts.

cs.CV

Why Didn't You Listen to Me? Comparing User Control of Human-in-the-Loop Topic Models

To address the lack of comparative evaluation of Human-in-the-Loop Topic Modeling (HLTM) systems, we implement and evaluate three contrasting HLTM modeling approaches using simulation experiments. These approaches extend previously proposed frameworks, including constraints and informed prior-based methods. Users should have a sense of control in HLTM systems, so we propose a control metric to measure whether refinement operations' results match users' expectations. Informed prior-based methods provide better control than constraints, but constraints yield higher quality topics.

cs.CL

Intel nGraph: An Intermediate Representation, Compiler, and Executor for Deep Learning

The Deep Learning (DL) community sees many novel topologies published each year. Achieving high performance on each new topology remains challenging, as each requires some level of manual effort. This issue is compounded by the proliferation of frameworks and hardware platforms. The current approach, which we call "direct optimization", requires deep changes within each framework to improve the training performance for each hardware backend (CPUs, GPUs, FPGAs, ASICs) and requires $\mathcal{O}(fp)$ effort; where $f$ is the number of frameworks and $p$ is the number of platforms. While optimized kernels for deep-learning primitives are provided via libraries like Intel Math Kernel Library for Deep Neural Networks (MKL-DNN), there are several compiler-inspired ways in which performance can be further optimized. Building on our experience creating neon (a fast deep learning library on GPUs), we developed Intel nGraph, a soon to be open-sourced C++ library to simplify the realization of optimized deep learning performance across frameworks and hardware platforms. Initially-supported frameworks include TensorFlow, MXNet, and Intel neon framework. Initial backends are Intel Architecture CPUs (CPU), the Intel(R) Nervana Neural Network Processor(R) (NNP), and NVIDIA GPUs. Currently supported compiler optimizations include efficient memory management and data layout abstraction. In this paper, we describe our overall architecture and its core components. In the future, we envision extending nGraph API support to a wider range of frameworks, hardware (including FPGAs and ASICs), and compiler optimizations (training versus inference optimizations, multi-node and multi-device scaling via efficient sub-graph partitioning, and HW-specific compounding of operations).

cs.DC