Searcharxiv⌕ Search

arXiv subjects

Vasilii Vadimov

Publications and source records attributed to Vasilii Vadimov.

18 recordsLinked to original sources

On truncations of hierarchical equations of motion for finite-dimensional systems

We study truncations of hierarchical equations of motion (HEOM) for finite-dimensional open quantum systems. We prove that for finite-dimensional approximations constructed with a Schur-complement type of terminator, the spectrum converges to that of the full HEOM as the truncation depth increases. We also prove that this approximation is free of spectral pollution: sufficiently deep truncations do not produce spurious unstable modes, provided the exact HEOM is stable. We illustrate the results for the spin-boson model.

quant-ph↗

Autonomous quantum heat engine

Quantum heat engines provide attractive means in quantum thermodynamics for studying the fundamentals of the flow of heat and work. Previous experimental implementations of heat engines operating at the level of a few excitation quanta have utilized external driving, which has made the observation of the produced work challenging. Conversely, autonomous quantum heat engines only require a flow of heat to operate and generate work. However, autonomous quantum heat engines have not yet been experimentally demonstrated in any system despite numerous theoretical investigations. Here, we experimentally realize an autonomous quantum heat engine based on superconducting circuits. We construct the engine circuit implementing an approximate Otto cycle by coupling two superconducting resonators with a superconducting quantum interference device, and coupling this system to spectrally filtered hot and cold reservoirs. By varying the experimental conditions, we observe coherent microwave power generation arising from the internal dynamics of the system driven only by the thermal reservoirs. Our results validate previous theoretical predictions for this circuit and pave the way for detailed studies of quantum effects in heat engines and for using heat-generated coherent microwaves in circuit quantum electrodynamics.

quant-ph↗

Quantum dial

Accurate control of quantum degrees of freedom is promising for sensing, communication, and computing, but building a useful quantum computer faces a central isolation-and-control challenge: qubits must remain well isolated from their environment to preserve coherence, yet also be coupled strongly enough for control, readout, and reset. Existing approaches address this challenge only partially, using separate reset elements, drive schemes, and Purcell filters, often with added complexity and tradeoffs such as heating and crosstalk. Here we introduce and demonstrate a first-generation quantum dial: a device that on demand mediates the coupling of a qubit to selected auxiliary degrees of freedom. Our implementation uses a band-stop filter between a high-coherence transmon qubit and a broadband transmission line, enabling the coupling strength to be tuned by several orders of magnitude on nanosecond timescales without significant Stark shift. In the reset configuration, we reduce the qubit energy relaxation time T1 from >150 $μ$s to about 200 ns and demonstrate reset independent of the initial state. In the control configuration, we obtain 99.99% idle fidelity and 99.9% gate fidelities for 40 ns pulses at about -110 dBm. The same device also enables thermometry of the qubit environment, reaching a noise-equivalent temperature of 0.6 mK/$\sqrt{Hz}$ at 60 mK and approaching the Cramér-Rao bound at higher temperatures. The quantum dial thus offers fast, on-demand switching between isolation and strong coupling, with potential to reduce noise and errors in future quantum processors.

quant-ph↗

Simulating Non-Markovian Dynamics in Open Quantum Systems

Recent advances in quantum technologies and related experiments have created a need for highly accurate, versatile, and computationally efficient simulation techniques for the dynamics of open quantum systems. Long-lived correlation effects (non-Markovianity), system-environment hybridization, and the necessity for accuracy beyond the Born-Markov approximation form particular challenges. Approaches to meet these challenges have been introduced, originating from different fields, such as hierarchical equations of motion, Lindblad-pseudomode formulas, chain-mapping approaches, quantum Brownian motion master equations, stochastic unravelings, and refined quantum master equations. This diversity, while indicative of the field's relevance, has inadvertently led to a fragmentation that hinders cohesive advances and their effective cross-community application to current problems for complex systems. How are different approaches related to each other? What are their strengths and limitations? Here we give a systematic overview and concise discussion addressing these questions. We make use of a unified framework which very conveniently allows to link different schemes and, this way, may also catalyze further progress. In line with the state of the art, this framework is formulated not in a fully reduced space of the system but in an extended state space which in a minimal fashion includes effective reservoir modes. This in turn offers a comprehensive understanding of existing methods, elucidating their physical interpretations, interconnections, and applicability.

quant-ph↗

Proposal for an autonomous quantum heat engine

We propose and theoretically analyse a superconducting electric circuit which can be used to experimentally realize an autonomous quantum heat engine. Using a quasiclassical, non-Markovian theoretical model, we demonstrate that coherent microwave power generation can emerge solely from the heat flow through the circuit determined by non-linear circuit quantum electrodynamics. The predicted energy generation rate is sufficiently high for experimental observation with contemporary techniques, rendering this work a significant step toward the first experimental realization of an autonomous quantum heat engine based on Otto cycles.

quant-ph↗

Dissipation and noise in strongly driven Josephson junctions

In circuit quantum electrodynamical systems, the quasiparticle-related losses in Josephson junctions are suppressed due to the gap in the superconducting density of states which is much higher than the typical energy of a microwave photon. In this work, we show that a strong drive even at a frequency lower than twice the superconductor gap parameter can activate dissipation in the junctions due to photon-assisted breaking of the Cooper pairs. Both the decay rate and noise strength associated with the losses are sensitive to the dc phase bias of the junction and can be tuned in a broad range by the amplitude and the frequency of the external driving field, making the suggested mechanism potentially attractive for designing tunable dissipative elements. We also predict pronounced memory effects in the driven Josephson junctions, which are appealing for both theoretical and experimental studies of non-Markovian physics in superconducting quantum circuits. We illustrate our theoretical findings by studying the spectral properties and the steady-state population of a low-impedance resonator coupled to the driven Josephson junction: we show the emergence of non-Lorentzian spectral lines and broad tunability of effective temperature of the steady state.

quant-ph↗

Parameter optimization for the unimon qubit

Inductively shunted superconducting qubits, such as the unimon qubit, combine high anharmonicity with protection from low-frequency charge noise, positioning them as promising candidates for the implementation of fault-tolerant superconducting quantum computers. In this work, we develop accurate closed-form approximations for the frequency and anharmonicity of the unimon qubit that are also applicable to any single-mode superconducting qubits with a single-well potential profile, such as the quarton qubit or the kinemon qubit. We use these results to theoretically explore the single-qubit gate fidelity and coherence times across the parameter space of qubits with a single-well potential. We find that the gate fidelity can be optimized by tuning the Hamiltonian to $(i)$ a high qubit mode impedance of $1-2$ $kΩ$, $(ii)$ a low qubit frequency of $1$ $GHz$, $(iii)$ and a perfect cancellation of the linear inductance and the Josephson inductance attained at a flux bias of half flux quantum. According to our theoretical analysis, the proposed qubit parameters have potential to enhance the single-qubit gate fidelity of the unimon beyond $99.99\%$ even without significant improvements to the dielectric quality factor or the flux noise density measured for the first unimon qubits. Furthermore, we compare unimon, transmon and fluxonium qubits in terms of their energy spectra and qubit coherence subject to dielectric loss and $1/f$ flux noise in order to highlight the advantages and limitations of each qubit type.

quant-ph↗

Many-excitation removal of a transmon qubit using a single-junction quantum-circuit refrigerator and a two-tone microwave drive

Achieving fast and precise initialization of qubits is a critical requirement for the successful operation of quantum computers. The combination of engineered environments with all-microwave techniques has recently emerged as a promising approach for the reset of superconducting quantum devices. In this work, we experimentally demonstrate the utilization of a single-junction quantum-circuit refrigerator (QCR) for an expeditious removal of several excitations from a transmon qubit. The QCR is indirectly coupled to the transmon through a resonator in the dispersive regime, constituting a carefully engineered environmental spectrum for the transmon. Using single-shot readout, we observe excitation stabilization times down to roughly $500$ ns, a $20$-fold speedup with QCR and a simultaneous two-tone drive addressing the $e$-$f$ and $f0$-$g1$ transitions of the system. Our results are obtained at a $48$-mK fridge temperature and without postselection, fully capturing the advantage of the protocol for the short-time dynamics and the drive-induced detrimental asymptotic behavior in the presence of relatively hot other baths of the transmon. We validate our results with a detailed Liouvillian model truncated up to the three-excitation subspace, from which we estimate the performance of the protocol in optimized scenarios, such as cold transmon baths and fine-tuned driving frequencies. These results pave the way for optimized reset of quantum-electric devices using engineered environments and for dissipation-engineered state preparation.

quant-ph↗

Rapid on-demand generation of thermal states in superconducting quantum circuits

We experimentally demonstrate the fast generation of thermal states of a transmon using a single-junction quantum-circuit refrigerator (QCR) as an in-situ-tunable environment. Through single-shot readout, we monitor the transmon up to its third-excited state, assessing population distributions controlled by QCR drive pulses. Whereas cooling can be achieved in the weak-drive regime, high-amplitude pulses can generate Boltzmann-distributed populations from a temperature of 110 mK up to 500 mK within 100 ns. As we propose in our work, this fast and efficient temperature control provides an appealing opportunity to demonstrate a quantum heat engine. Our results also pave the way for efficient dissipative state preparation and for reducing the circuit depth in thermally assisted quantum algorithms and quantum annealing.

quant-ph↗

Multimode physics of the unimon circuit

We consider a superconducting half-wavelength resonator that is grounded at its both ends and contains a single Josephson junction. Previously this circuit was considered as a unimon qubit in the single-mode approximation where dc-phase-biasing the junction to $π$ leads to increased anharmonicity and 99.9% experimentally observed single-qubit gate fidelity. Inspired by the promising first experimental results, we develop here a theoretical and numerical model for the detailed understanding of the multimode physics of the unimon circuit. To this end, first, we consider the high-frequency modes of the unimon circuit and find that even though these modes are at their ground state, they imply a significant renormalization to the Josephson energy. We introduce an efficient method how the relevant modes can be fully taken into account and show that unexcited high-lying modes lead to corrections in the qubit energy and anharmonicity. Interestingly, provided that the junction is offset from the middle of the circuit, we find strong cross-Kerr coupling strengths between a few low-lying modes. This observation paves the way for the utilization of the multimode structure, for example, as several qubits embedded into a single unimon circuit.

quant-ph↗

Exceptional-point-assisted entanglement, squeezing, and reset in a chain of three superconducting resonators

The interplay between coherent and dissipative dynamics required in various control protocols of quantum technology has motivated studies of open-system degeneracies, referred to as exceptional points (EPs). Here, we introduce a scheme for fast quantum-state synthesis using exceptional-point engineering in a lossy chain of three superconducting resonators. We theoretically find that the rich physics of EPs can be used to identify regions in the parameter space that favor a fast and quasi-stable transfer of squeezing and entanglement, or a fast reset of the system. For weakly interacting resonators with the coupling strength $g$, the obtained quasi-stabilization time scales are identified as $1/(2\sqrt{2}g)$, and reset infidelities below $10^{-5}$ are obtained with a waiting time of roughly $6/g$ in the case of weakly squeezed resonators. Our results shed light on the role of EPs in multimode Gaussian systems and pave the way for optimized distribution of squeezing and entanglement between different nodes of a photonic network using dissipation as a resource.

quant-ph↗

A Universal Framework for Quantum Dissipation:Minimally Extended State Space and Exact Time-Local Dynamics

The dynamics of open quantum systems is formulated in a minimally extended state space comprising the degrees of freedom of a system of interest and a finite set of non-unitary, pure-state reservoir modes. This formal structure, derived from the Feynman-Vernon path integral for the reduced density, is shown to lead to an exact time-local evolution equation in a mixed Liouville-Fock space. The crucial ingredient is a mathematically consistent decomposition of the reservoir auto-correlation in terms of harmonic modes with complex-valued frequencies and amplitudes, which are obtained from any given spectral noise power of the physical reservoir. This formulation provides a universal framework to obtain a family of equivalent representations which are directly related to new and established schemes for efficient numerical simulations. By restricting some of the complex-valued mode parameters and performing linear transformations, we make connections to previous approaches, whose auxiliary degrees of freedom are thus revealed as restricted versions of the minimally extended state space presented here. From a practical perspective, the new framework offers a computational tool which combines numerical efficiency and accuracy with long time stability and broad applicability over the whole temperature range and also for strongly structured reservoir mode densities. It can thus deliver high precision data with modest computational resources and simulation times for actual quantum technological devices.

quant-ph↗

Single-Shot Readout of a Superconducting Qubit Using a Thermal Detector

Measuring the state of qubits is one of the fundamental operations of a quantum computer. Currently, state-of-the-art high-fidelity single-shot readout of superconducting qubits relies on parametric amplifiers at the millikelvin stage. However, parametric amplifiers are challenging to scale beyond hundreds of qubits owing to practical size and power limitations. Nanobolometers have a multitude of properties that are advantageous for scalability and have recently shown sensitivity and speed promising for qubit readout, but such thermal detectors have not been demonstrated for this purpose. In this work, we utilize an ultrasensitive bolometer in place of a parametric amplifier to experimentally demonstrate single-shot qubit readout. With a readout duration of $13.9~μ\mathrm{s}$, we achieve a single-shot fidelity of 0.618 which is mainly limited by the energy relaxation time of the qubit, $T_1 = 28~μ\mathrm{s}$. Without the $T_1$ errors, we find the fidelity to be 0.927. In the future, high-fidelity single-shot readout may be achieved by straightforward improvements to the chip design and experimental setup, and perhaps most interestingly by the change of the bolometer absorber material to reduce the readout time to the hundred-nanosecond level and beyond.

quant-ph↗

Quantum error correction under numerically exact open-quantum-system dynamics

The known quantum error-correcting codes are typically built on approximative open-quantum-system models such as Born--Markov master equations. However, it is an open question how such codes perform in actual physical systems that, to some extent, necessarily exhibit phenomena beyond the limits of these models. To this end, we employ numerically exact open-quantum-system dynamics to analyze the performance of a five-qubit error correction code where each qubit is coupled to its own bath. We first focus on the performance of a single error correction cycle covering time scales beyond that of Born--Markov models. Namely, we observe distinct power law behavior of the channel infidelity $\propto t^{2a}$: $a\lesssim 2$ in the ultrashort times $t<3/ω_{\rm c}$ and $a\approx 1/2$ in the short-time range $3/ω_{\rm c}<t<30/ω_{\rm c}$, where $ω_{\rm c}$ is the cutoff angular frequency of the bath. Importantly, the five-qubit quantum-error correction code suppresses all single errors, including those arising from the ultrashort and short-time evolution, which are peculiar to the exact evolution. Interestingly, we demonstrate the breaking points of the five-qubit error correction code and the Born--Markov models for repeated error correction when the repetition rate exceeds $2π/ω$ or the coupling strength $κ\gtrsim 0.1 ω$, where $ω$ is the angular frequency of the qubit. Our results pave the way for applying numerically exact open-quantum-system models for the studies of QECs beyond simple error models.

quant-ph↗

Unimon qubit

Superconducting qubits are one of the most promising candidates to implement quantum computers. The superiority of superconducting quantum computers over any classical device in simulating random but well-determined quantum circuits has already been shown in two independent experiments and important steps have been taken in quantum error correction. However, the currently wide-spread qubit designs do not yet provide high enough performance to enable practical applications or efficient scaling of logical qubits owing to one or several following issues: sensitivity to charge or flux noise leading to decoherence, too weak non-linearity preventing fast operations, undesirably dense excitation spectrum, or complicated design vulnerable to parasitic capacitance. Here, we introduce and demonstrate a superconducting-qubit type, the unimon, which combines the desired properties of high non-linearity, full insensitivity to dc charge noise, insensitivity to flux noise, and a simple structure consisting only of a single Josephson junction in a resonator. We measure the qubit frequency, $ω_{01}/(2π)$, and anharmonicity $α$ over the full dc-flux range and observe, in agreement with our quantum models, that the qubit anharmonicity is greatly enhanced at the optimal operation point, yielding, for example, 99.9% and 99.8% fidelity for 13-ns single-qubit gates on two qubits with $(ω_{01},α)=(4.49~\mathrm{GHz}, 434~\mathrm{ MHz})\times 2π$ and $(3.55~\mathrm{GHz}, 744~\mathrm{ MHz})\times 2π$, respectively. The energy relaxation time $T_1\lesssim 10~μ\mathrm{s}$ is stable for hours and seems to be limited by dielectric losses. Thus, future improvements of the design, materials, and gate time may promote the unimon to break the 99.99% fidelity target for efficient quantum error correction and possible quantum advantage with noisy systems.

quant-ph↗

Recent Developments in Quantum-Circuit Refrigeration

We review the recent progress in direct active cooling of the quantum-electric degrees freedom in engineered circuits, or quantum-circuit refrigeration. In 2017, the invention of a quantum-circuit refrigerator (QCR) based on photon-assisted tunneling of quasiparticles through a normal-metal--insulator--superconductor junction inspired a series of experimental studies demonstrating the following main properties: (i) the direct-current (dc) bias voltage of the junction can change the QCR-induced damping rate of a superconducting microwave resonator by orders of magnitude and give rise to non-trivial Lamb shifts, (ii) the damping rate can be controlled in nanosecond time scales, and (iii) the dc bias can be replaced by a microwave excitation, the amplitude of which controls the induced damping rate. Theoretically, it is predicted that state-of-the-art superconducting resonators and qubits can be reset with an infidelity lower than $10^{-4}$ in tens of nanoseconds using experimentally feasible parameters. A QCR-equipped resonator has also been demonstrated as an incoherent photon source with an output temperature above one kelvin yet operating at millikelvin. This source has been used to calibrate cryogenic amplification chains. In the future, the QCR may be experimentally used to quickly reset superconducting qubits, and hence assist in the great challenge of building a practical quantum computer.

quant-ph↗

Photon-number-dependent effective Lamb shift

The Lamb shift, an energy shift arising from the presence of the electromagnetic vacuum, has been observed in various quantum systems and established as the part of the energy shift independent of the environmental photon number. However, typical studies are based on simplistic bosonic models which may be challenged in practical quantum devices. We demonstrate a hybrid bosonic-fermionic environment for a linear resonator mode and observe that the photon number in the environment can dramatically increase both the dissipation and the effective Lamb shift of the mode. Our observations are quantitatively described by a first-principles model which we develop here also to guide device design for future quantum-technological applications. The device demonstrated here can be utilized as a fully rf-operated quantum-circuit refrigerator to quickly reset superconducting qubits.

quant-ph↗

Validity of Born-Markov master equations for single and two-qubit systems

The urgent need for reliable simulation tools to match the extreme accuracy needed to control tailored quantum devices highlights the importance of understanding open quantum systems and their modeling. To this end, we compare here the commonly used Redfield and Lindblad master equations against numerically exact results in the case of one and two resonant qubits transversely coupled at a single point to a Drude-cut ohmic bath. All the relevant parameters are varied over a broad range which allows us to give detailed predictions about the validity and physically meaningful applicability of the weak-coupling approaches. We characterize the accuracy of the approximate approaches by comparing the maximum difference of their system evolution superoperators with numerically exact results. After optimizing the parameters of the approximate models to minimize the difference, we also explore if and to what extent the weak-coupling equations can be applied at least as phenomenological models. Optimization may lead to an accurate reproduction of experimental data, but yet our results are important to estimate the reliability of the extracted parameter values such as the bath temperature. Our findings set general guidelines for the range of validity of the usual Born-Markov master equations and indicate that they fail to accurately describe the physics in surprisingly broad range of parameters, in particular at low temperatures. Since quantum-technological devices operate there their accurate modeling calls for a careful choice of methods.

quant-ph↗